Engineering Commons^™

Information-Theoretic Model Diagnostics (Infomod), Armin Esmaeilzadeh

UNLV Theses, Dissertations, Professional Papers, and Capstones

Model validation is a critical step in the development, deployment, and governance of machine learning models. During the validation process, the predictive power of a model is measured on unseen datasets with a variety of metrics such as Accuracy and F1-Scores for classification tasks. Although the most used metrics are easy to implement and understand, they are aggregate measures over all the segments of heterogeneous datasets, and therefore, they do not identify the performance variation of a model among different data segments. The lack of insight into how the model performs over segments of unseen datasets has raised significant challenges …

Spectroscopic Studies On Silicon And Chalcopyrite Materials For Solar Energy Applications, Amandee Hua

UNLV Theses, Dissertations, Professional Papers, and Capstones

In this dissertation, silicon-based materials for photovoltaics and chalcopyrite-based materials for photoelectrochemical water splitting are investigated using various spectroscopic and microscopic techniques. Although silicon dominates the photovoltaic market, further improvement can be made by using an alternative low temperature passivation approach. Currently, thermally grown SiO2 passivation is commonly used for silicon solar cells. However, this technique requires high processing temperatures (>800 °C), which increases the thermal budget, potentially decreases the bulk quality of Si, and can lead to difficulties in implementing in production lines. Here, a S-based passivation approach is studied that require lower processing temperatures of ~550 °C. …

Enhanced Iot-Based Electrocardiogram Monitoring System With Deep Learning, Jian Ni

UNLV Theses, Dissertations, Professional Papers, and Capstones

Due to the rapid development of computing and sensing technologies, Internet of Things (IoT)-based cardiac monitoring plays a crucial role in providing patients with cost-efficient solutions for long-term, continuous, and pervasive electrocardiogram (ECG) monitoring outside a hospital setting. In a typical IoT-based ECG monitoring system, ECG signals are picked up by sensors located on the edge, and then uploaded to the remote cloud servers. ECG interpretation is performed for the collected ECGs in the cloud servers and the analysis results can be made instantly available to the patients as well as their healthcare providers.In this dissertation, we first examine the …

Mathematical Modeling: Finite Element Analysis And Computations Arising In Fluid Dynamics And Biological Applications, Jorge Reyes

UNLV Theses, Dissertations, Professional Papers, and Capstones

It is often the case when attempting to capture real word phenomena that the resulting mathematical model is too difficult and even not feasible to be solved analytically. As a result, a computational approach is required and there exists many different methods to numerically solve models described by systems of partial differential equations. The Finite Element Method is one of them and it was pursued herein.This dissertation focuses on the finite element analysis and corresponding numerical computations of several different models. The first part consists of a study on two different fluid flow models: the main governing model of fluid …

A One-Dimensional Analysis Of A Microbial Fuel Cell For Efficient Acetate Removal And Power Density Output, David Rouhani

UNLV Theses, Dissertations, Professional Papers, and Capstones

Microbial fuel cells (MFCs) are electrochemical devices that utilize microorganisms to convert organic matter into electrical energy. MFCs have been discussed to have potential application for sustainable wastewater treatment due to their ability to generate electricity while simultaneously treating contaminated water. To optimize MFC performance, numerical models can be used to understand the complex electrochemical and biological processes occurring in the system. In this study, a numerical model was developed to simulate the performance of MFCs under varying operating conditions and to investigate the performance of a MFC for treating wastewater fuel. More specifically, the MFC was modeled to oxidize …

Analysis And Application Of Finite Element And High-Order Finite Difference Methods For Maxwell’S Equations In Complex Media, Li Zhu

UNLV Theses, Dissertations, Professional Papers, and Capstones

The Perfectly Matched Layer (PML) technique is an effective tool introduced by B´erenger [13] to reduce the unbounded wave propagation problem to a bounded domain problem. This dissertation focuses on two different PML models and their applications to wave propagation problems with Maxwell’s equation in complex media. We investigate these models using two popular numerical methods: the Finite Difference Method (FDM) in Chapters 2 and 3, and the Finite Element Method (FEM) in Chapters 4 and 5.In Chapter 2, we focus on analyzing the stability of a PML developed by B’ecache et al. [10] for simulating wave propagation in the …

Analysis And Implementation Of A New High-Buck Dc-Dc Converter With Interleaved Output Inductors And Soft Switching Capability, Sajad Ghabeli Sani, Mohamad Reza Banaei, Seyed Hossein Hosseini

Turkish Journal of Electrical Engineering and Computer Sciences

This paper proposes an innovative structure for DC-DC converters with high buck gain by using a lower number of elements. The converter provides highly efficient output power and an extended output voltage range. In addition, the distribution of output current between two inductors and the soft-switching capability of the power switches have made the converter suitable for applications that require high output current. All power switches accomplish the ZVZCS (zero-voltage and zero-current switching) condition with the aid of a small auxiliary inductor (Lx), which charges and discharges parallel capacitors of main switches to provide soft-switching conditions. Thus, the switching losses …

An Efficient Deep Learning Architecture For Turkish Lira Recognition And Counterfeit Detection, Burak İyi̇kesi̇ci̇, Ergun Erçelebi̇

Turkish Journal of Electrical Engineering and Computer Sciences

Banknote counterfeiting is a common practice worldwide. Due to the recent developments in technology, banknote imitation has become easier than before. There are different kinds of algorithms developed for the detection of counterfeit banknotes for different countries in the literature. The earlier algorithms utilized classical image processing techniques where the implementations of machine learning and deep learning algorithms appeared with the developments in the artificial intelligence field as well as the computer hardware. In this study, a novel convolutional neural networks-based deep learning algorithm has been developed that detects counterfeit Turkish Lira banknotes and their denominations using the banknote images …

Battery Design, Construction, And Characterization For Small Motor Use Focusing On Anodic Zinc For Electron Flow, Amber Veach

Chemical Engineering Undergraduate Honors Theses

This thesis explores the construction, characterization, and application of anodic zinc batteries for powering a small electric motor for the ChemE Car competition. Two zinc galvanic cell batteries were studied: zinc-carbon and zinc-air batteries. Prototype batteries were constructed and tested for voltage, amperage, and power production. In the zinc-carbon trials, a 3:1 mixture of manganese dioxide and graphite was determined to be the best cathode for power production. The size which allowed for sufficient power while maintaining the smallest footprint on the car was a zinc can six cm tall and two cm in diameter. Analysis of paper zinc-air battery …

Probing The Structure Of Water On Surfaces: From Water Absorption To Ice Nucleation, Jiarun Zhou

All Dissertations

Water, essential for all life forms, is the most abundant, simple, yet mysterious molecule in the world. This molecule, consisting of only three atoms, behaves in unexpectedly different ways with the change of environment. In the past, studies of water under different conditions (temperature, pressure, on the surfaces, with confinement) have been conducted using experimental and computational methods. However, the influence of a given environment on water properties is yet to be fully understood. This dissertation studies water at complex interfaces (surfaces with various chemistry and physics properties) in both the liquid and crystalline states. Various heterogeneous systems used to …

Leveraging Aruco Fiducial Marker System For Bridge Displacement Estimation Using Unmanned Aerial Vehicles, Mohamed Aly

School of Computing: Dissertations, Theses, and Student Research

The use of unmanned aerial vehicles (UAVs) in construction sites has been widely growing for surveying and inspection purposes. Their mobility and agility have enabled engineers to use UAVs in Structural Health Monitoring (SHM) applications to overcome the limitations of traditional approaches that require labor-intensive installation, extended time, and long-term maintenance. One of the critical applications of SHM is measuring bridge deflections during the bridge operation period. Due to the complex remote sites of bridges, remote sensing techniques, such as camera-equipped drones, can facilitate measuring bridge deflections. This work takes a step to build a pipeline using the state-of-the-art computer …

Sim-To-Real Reinforcement Learning Framework For Autonomous Aerial Leaf Sampling, Ashraful Islam

School of Computing: Dissertations, Theses, and Student Research

Using unmanned aerial systems (UAS) for leaf sampling is contributing to a better understanding of the influence of climate change on plant species, and the dynamics of forest ecology by studying hard-to-reach tree canopies. Currently, multiple skilled operators are required for UAS maneuvering and using the leaf sampling tool. This often limits sampling to only the canopy top or periphery. Sim-to-real reinforcement learning (RL) can be leveraged to tackle challenges in the autonomous operation of aerial leaf sampling in the changing environment of a tree canopy. However, trans- ferring an RL controller that is learned in simulation to real UAS …

The Study Of Corrosion On Additive-Manufactured Metals., Braydan Daniels

Electronic Theses and Dissertations

The purpose of this study was to investigate and compare the corrosion mechanisms between wrought and additive-manufactured (3D-printed) copper and stainless steel. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, Tafel analysis, surface topology, and scanning electron microscopy for each metal within salt water, tap water, sulfuric acid, and synthetic body fluid (excluding copper in synthetic body fluid).

Overall, printed stainless steel was more corrosion-resistant than wrought stainless steel in tap water and synthetic body fluid based on OCP, LSV, and surface topology results. Additionally, printed copper was more corrosion-resistant than wrought …

Investigating Haloacetonitrile (Han) Formation Potential From Nitrogenous Antibiotics And Agrochemicals, Kazi Shafayet Haider

UNLV Theses, Dissertations, Professional Papers, and Capstones

Disinfection can promote safe drinking water. Chlorine and chloramines are the two most used disinfectants. While these disinfectants are effective in inactivating disease-causing pathogens, they also produce hazardous byproducts when they react with organic compounds (precursors). Nitrogenous disinfection byproducts (N-DBPs) are more toxic than their counterparts. The increased use of nitrogen-based agrochemicals and antibitics has led to their detection in different water sources. The presence of secondary amine and aniline in these compounds can act as a source of reactive nitrogen to form N-DBPs. In addition, the increased concentration of bromide in water systems due to anthropogenic activities can enhance …

Nb3Sn Coating Of Twin Axis Cavity And Other Complex Srf Cavity Structures, Jayendrika Kumari Tiskumara

Physics Theses & Dissertations

In the field of Accelerator Science, for the low cost and increased quality factor, thin films coated niobium cavities are used in the modern SRF research. Within the potential substances, Nb₃Sn has shown higher critical temperature than niobium. Here the tin vapor diffusion method is used as the preferred technique to coat niobium cavities. So far, only elliptical cavities have been coated with Nb₃Sn and this technique has not yet been applied to cavities with complex geometries, which are also helpful in the accelerator science field. The Half-wave resonator could provide us data across frequencies of …

Procedural City Generation With Combined Architectures For Real-Time Visualization, Griffin Poyck

All Theses

The work and research of this paper sought to build upon traditional city generation and simulation in creating a tool that both realistically simulates cities and their prominent features and also creates aesthetic and artistically rich cities using assets that combine several contemporary or near contemporary architectural styles. The major city features simulated are the surrounding terrain, road networks, individual buildings, and building placement. The tools used to both create and integrate these features were created in Houdini with Unreal Engine 5 as the intended final destination. This research was influenced by the city, town, and road networking of Ghost …

Metastability And Degradation In Cu(In,Ga)Se2 Thin-Film Solar Cells, Mohsen Jahandardoost

UNLV Theses, Dissertations, Professional Papers, and Capstones

Cu(In,Ga)(S,Se)2 or CIGS is a thin-film semiconductor that has shown a device efficiency of 23.35% and 24.2% for single-junction and perovskite/CIGS tandem solar cells, respectively. CIGS offers promising properties such as tunable bandgap and ease of processing making them great candidates for thin-film tandem devices. However, knowledge of the effect of material defects, buffer materials, and post-deposition treatment (PDT) on degradation and metastability behavior in these devices is not well understood.In this dissertation, metastability and long-term degradation of CIGS thin-film solar cells have been investigated under combinatorial stress factors of heat, light, and voltage bias to systematically understand the effect …

Mission Concept User Guide: University Nanosatellite Program (Unp), Space Dynamics Laboratory

Space Dynamics Laboratory Publications

This guide is specific to the University Nanosatellite Program (UNP) Mission Concept Program and focuses heavily on mission design and initial systems engineering processes. Additional information covering mission design, systems engineering processes, detailed design, assembly, integration, and testing is available in the UNP Nanosatellite User Guide and other associated UNP resources. This guide assumes the reader has entry-level familiarity with engineering, space, and satellite concepts such as mechanical and electrical calculations and terms, orbits, and CubeSats. UNP provides much of this information during the Kickoff and Mission Design presentations.

Effect On Focusing Fields By Ferromagnetic Cell Cores In Linear Induction Accelerators, Cooper Guillaume

Senior Honors Theses

In the Los Alamos National Laboratories DARHT facility, there are two perpendicular linear induction accelerators, LIAs. The LIAs’ solenoids produce magnetic fields which focus the electron beam. Simultaneously, the accelerating pulse creates a magnetic field. These two field intensities act upon a ferromagnetic material in the cells to enhance magnetic flux density. Due to the nonlinearity of the material, this flux density will reach a saturation point. In turn, the magnetic field intensity of the axial solenoidal magnetic field will be affected and slightly altered. The width of the electron beam will increase, causing a decrease in effectiveness. Through simulation, …

An Exploration Of The Application Of Desalination In Disaster Relief, Emma Sager

Senior Honors Theses

This paper aims to explore the application of small-scale desalination systems to provide clean water in the wake of marine natural disasters. A lack of clean water is a devastating impact of many natural disasters. Desalination technologies, both thermal and membrane, show potential for being scaled down and self-powered by renewable energy. Desalination can transform ocean water and contaminated drinking water with a high salt content into drinkable, usable water. While these techniques are not perfected, and the solution to a need for clean water is multifaceted, desalination shows potential. Through further research and ever-advancing technology, small-scale desalination could develop …

Rattus Norvegicus As A Biological Detector Of Clandestine Remains And The Use Of Ultrasonic Vocalizations As A Locating Mechanism, Gabrielle M. Johnston

Master's Theses

In investigations, locating missing persons and clandestine remains are imperative. One way that first responder and police agencies can search for the remains is by using cadaver dogs as biological detectors. Cadaver dogs are typically used due to their olfactory sensitivity and ability to detect low concentrations of volatile organic compounds produced by biological remains. Cadaver dogs are typically chosen for their stamina, agility, and olfactory sensitivity. However, what is not taken into account often is the size of the animal and the expense of maintaining and training the animal. Cadaver dogs are typically large breeds that cannot fit in …

Impacts Of Preferential Flow On Tc-99and Np-237 Vadose Transport In Soils At The Savannah River Site, Josh Parris

All Theses

Since the 1950s, the United States has produced approximately 90,000 metric tons of spent nuclear fuel (SNF) (Office of Nuclear Energy, 2022); however, no long-term storage solutions are available. Technecium-99 and neptunium-237, two fission products found in SNF, readily form highly mobile species in oxidizing conditions (Hu, 2008; Bondietti, 1979) and have respective half-lives of 2.13 x 10⁵ and 2.14 x10⁶ years (Hu, 2010). Considering these characteristics, ⁹⁹Tc and ²³⁷Np are two risk-driving isotopes found in SNF storage. The process of macropore-facilitated preferential flow, transport through cracks within a soil matrix, has been recognized to increase …

The Characterization Of Atmospheric Turbulence And Its Effect On Laser Beam Propagation, Michael Cox

All Theses

Having a controlled environment to measure atmospheric turbulence is essential to understanding its effects on different laser beam characteristics. The Clemson Variable Turbulence Generator (VTG) has the capability to propagate a laser beam up to 100 m and be able to dial many turbulence settings up to a heat flux of 357 W/m². A high-speed camera, power detector, and high-resolution temperature probes characterize the VTG with theoretical turbulence spectrums. The exponent associated with the Rayleigh-Bénard (RB) temperature structure constant equation is studied. Two different laser beam profiles are used throughout this work: Gaussian and Asymmetric Perfect Vortex (APV). …

Deep Learning-Based Turkish Spelling Error Detection With A Multi-Class False Positive Reduction Model, Burak Aytan, Cemal Okan Şakar

Turkish Journal of Electrical Engineering and Computer Sciences

Spell checking and correction is an important step in the text normalization process. These tasks are more challenging in agglutinative languages such as Turkish since many words can be derived from the root word by combining many suffixes. In this study, we propose a two-step deep learning-based model for misspelled word detection in the Turkish language. A false positive reduction model is integrated into the system to reduce the false positive predictions originating from the use of foreign words and abbreviations that are commonly used in Internet sharing platforms. For this purpose, we create a multi-class dataset by developing a …

Low-Cost Microstereolithography 3d Printing With Microfluidic Microsampling Applications, Lauren Twombly

Chemistry & Biochemistry Undergraduate Honors Theses

The growing field of stereolithography 3D printing has welcomed a new age ofmicrofluidic device fabrication techniques. When compared to previous planar fabrication techniques such as soft-lithography, stereolithography 3D printing offers highly automated procedures, reduced fabrication times, and greater complexity of device features. To date, the greatest tradeoff for 3D printing in microfluidic device fabrication is poorer resolution when compared to soft-lithography which can produce feature sizes on the nanometer scale. The poorer resolution of 3D printing limits the feasible size of features. While highly sophisticated 3D printers are capable of achieving sub 10 μm resolution, these instruments are incredibly expensive …

Separation Of Organic Acids Through Direct Catalysis From Sugars, Katelyn Robinson

Chemical Engineering Undergraduate Honors Theses

Society relies on plastic products, whether they are single use or durable. A downside of plastic is that the most common type is a product of oil and oil is not only a limited resource but also a climate-damaging resource. Polylactic acid (PLA) is a bio-based, biodegradable plastic. However, the process of converting biomass to polylactic acid polymer has the largest environmental impact of the PLA production process, so alternative methods of conversion are needed (Moretti et al., 2021). The polylactic acid polymer can be made with lactic acid, which can be converted from glucose.

Vanet Applications Under Loss Scenarios & Evolving Wireless Technology, Adil Alsuhaim

All Dissertations

In this work we study the impact of wireless network impairment on the performance of VANET applications such as Cooperative Adaptive Cruise Control (CACC), and other VANET applications that periodically broadcast messages. We also study the future of VANET application in light of the evolution of radio access technologies (RAT) that are used to exchange messages. Previous work in the literature proposed fallback strategies that utilizes on-board sensors to recover in case of wireless network impairment, those methods assume a fixed time headway value, and do not achieve string stability. In this work, we study the string stability of a …

Addressing The Challenged Of Dcop Based Decision-Making Algorithms In Modern Power Systems, Luis Daniel Ramirez Burgueno

Open Access Theses & Dissertations

Natural disasters have been determined as the leading cause of power outages, causing not only huge economic losses, but also the interruption of crucial welfare activities and the arise of security concerns. Because of the later, decision-making considering grid modernization, power system economics, and system resiliency has been a crucial theme in power systemsâ?? research. The need to better withstand catastrophic events and reducing the dependency of bulky generating units has propelled the development and better management of behind-the-meter generation or distributed energy resources (DERs). DERs can assist in the grid in different manners, not only by meeting energy demand …

Multi-Objective Optimization Framework For Electrified Vehicle Penetration Based On Life Cycle Assessment And Life Cycle Cost., Eva Alondra Diaz Lozano

Open Access Theses & Dissertations

This research proposed a novel framework for creating optimal transportation scenarios that consider multiple objectives such as minimum greenhouse gas emissions, air pollutant levels, and cost of ownership. The thesis approach is a multi-objective evolutionary algorithm coupled with the AFEET tool, allowing us to efficiently explore the complex trade-offs between these objectives and identify a diverse set of optimal solutions. Through several case studies and a design of experiments, this demonstrates the effectiveness and practicality in different scenarios. This approach has significant implications for policymakers and industry professionals seeking to make sustainable and cost-effective decisions in the transportation sector.

Development Of A Cost-Constrained Intelligent Prosthetic Knee With Real-Time Machine Learning, Predictive Stumble Control, Lucas Jonathan Galey

Open Access Theses & Dissertations

The field of biomechatronics is evolving quickly with advances in computer science, biology, and electrical and mechanical engineering. Coupled with increased interests in machine learning (ML) across all industry sectors, there are opportunities to leverage advanced analytics in uniquely complex problems. This study aimed to deploy real-time ML predictions in a novel microprocessor-controlled prosthetic knee (MPK) device capable of identifying and responding to stumble-events to reduce amputee fall prevalence. Innately, stumbling is a chaotic event. Current MPKs operate by detecting gait characteristics and reacting to preprogrammed states. While these systems are beneficial in significant ways, such as energy expenditure and …