Engineering Commons^™

Breast Cancer Mass Detection Using Difference Of Gaussians And Pulse Coupled Neural Networks, Donald A. Cournoyer

Theses and Dissertations

CAD, serving as a second reader, has been shown to improve the success of radiologists at detecting breast cancer. This thesis will develop a new algorithm to identify masses in mammograms. The system developed for this thesis will be capable of assisting a radiologist in making decisions.

Li/Α-Sn(Hpo4)2 Cell And Its Reaction Mechanism, Yuan Lin, Runliang Cai, Haoqing Wu

Journal of Electrochemistry

The discharge mechanism of Li/α-Sn(HPO₄)₂ cell has been investigated by means of X-ray diffraction, XPS and cyclic voltammetry methodes. It has been shown that the electrochemical intercalation reation exists in the cathode material. There is a new phase after some degree of intercalation. With potential step and galvanostatic techniques, the chemical diffusion cofficients of Li⁺ in Li_xSn(HPO₄)₂ is estimated to be 10^-12～10^-13 cm²·s^-1.

The Activity Of Alloy Cu-Ni Electrode In Electroreduction Of Aromatic Nitro-Compounds, Chunan Ma, Shaoping Tong, Xiaojun Cheng, Hui Wang

Journal of Electrochemistry

Cu-Ni alloy on the basis of copper at different ratio Cu/Ni are prepared by codepostion. The cathode activtiy of film are studied by steady-state polarization for electroreduction nitro-benzene (NB) and 1,5-dinitroanthraquinone (1,5-DNA) to p-aminophenol and 1,5-diamino-4,8-dihydroanthraquinone respectly. The results show that the alloy cathodes at different ratio Cu/Ni have different exchange current density (i^o) and apparent activition energy (E_A). The alloy (CN-30) has maximal i^o and minimal E_A by codeposition at the following conditions: electrolyte: 0.05 mol/L CuSO₄·5H₂O+0.6 mol/L NiSO₄·6H₂O+0.25 mol/L Na₃Cit·2H₂O; …

Preparation Of High Rate Discharge Foamed Ni-Cd Battery, Yuming Wang, Jinsheng Chen

Journal of Electrochemistry

A novel device of SC type foamed NiCd battery is presented, in which, the innerresistance of battery is appeared to be reduced, and the electrode performance is gained to very improved, and so, this battery can be suited to using of the powerdrive pistol drill.

Study On The Oxygen Electrodes Of Alkaline Fuel Cells Effect Of Dopant On The Activity Of Ag/C Catalyst, Jiawei Teng, Linhua Jin, Luncheng Tang

Journal of Electrochemistry

A new kind of nonnoble catalyst for the oxygen electrodes of Alkaline Fuel Cells was investigated. The AgNiBiHg/C catalyst, which was prepared by chemical reduction, was active for the cathodic reduction of oxygen in alkaline fuel cells. It was found that the catalytic activity was improved by adding Ni, Bi, Hg to Ag/C catalyst, and the maximum activity was observed at Ag50%-Ni2%-Bi3%-Hg3%-C42%(wt%). XRD inconjunction with SEM indicated that the crystalline silver turned into amorphous in the presence of doping agents and the grain size of silver was reduced. No dramatic deactivation of the catalyst occured after 5200 hours of service.

Molten Carbonate Fuel Cell Materials And Technology, Naichao Li, Baolian Yi

Journal of Electrochemistry

Molten Carbonate Fuel Cell materials are reviewed, and the technology of Molten Carbonate Fuel Cell are discussed.

Study On Perchlorate Produced By Electrolysis With Oxygen Cathode, Zhigang Shao, Baolian Yi, Naichao Li, Ming Han

Journal of Electrochemistry

A new method of measuring the flow capacity of cell gas in the perchlorate cell process equipped with an oxygen cathode is applided to investigate the influence of changes in the concentration of solution (chloride, chlorate, perchlorate and metal ion) and changes in the operation parameters (current density, temperature and pH) on perchlorate current efficiency. The main abstacle that the oxygen cathode is used in the perchlorate cell process is put forward and a method is provided to resolve it.

The Effect Of Solution Composition On The Corrosion Behavior Of Electrodeposited Zinc Powder, Qingwen Li, Qin Yang, Xi Xia

Journal of Electrochemistry

Zinc powder as a widely anode material can be electrowon from ZnCl₂ or ZnO+KOH media. The properties of zinc powder are likely to be modified with electrolytic conditions such as the composition of bath solution, electrolysis manner, current density and additives etc.. In this paper, we have discussed the effect of the compositions of bath solution on the microstructure and corrosion resistance of zinc powder.

Development Of A New Type Ni-S Evolution Hydrogen Electrode For Water Electrolysis, Xiaoyou Yuan, Jinyu Wang

Journal of Electrochemistry

A new type evolution hydrogen electrode NiS(N) has been made from nickel plating electrode in NiSO₄CS(NH₂)₂ bath by electrodeposition. It is analyzed by SEM and X-ray energy spectrum. The NiS(N) electrode is different from the NiS(O) electrode (which is used in plant at present time) in surface metallograph configuration and surfer content. The results of measurement polarization curves and water electrolysis 480 hours at 5 000 A·m^-2 show that the evolution hydrogen overpotential of NiS(N) electrode is decreased at least 160 mV relative to NiS(O) electrode and the stablisum of NiS(N) electrode is better …

Advances In Solid Polymer Electrolytes, Liming Ding, Shaojun Dong, Erkang Wang

Journal of Electrochemistry

The formation, classification, applications and ion-transport mechanism studies of solid polymer electrolytes were reviewed. While the recent SPE reports on the preparation of novel materials, the full structure determinations of PEO/salt complexes, the exploration of ion-transport mechanism and the applications in electrochemical devices being introduced, some prospects on the future SPE research were suggested.

The Effect Of Bismuth On Microstructure Of The Cathodic Copper Deposition Of Copper Electrorefining, Daorong Lu, Jianxing Lin

Journal of Electrochemistry

The electrocrystal formation, crystal orientation and the chemical composition of the cathodic copper deposition in the presence of Bi³⁺ in the electrolyte of acidified CuSO₄ are studies by scanning electron microscopy, X-ray diffraction, atomic absorption and EDAM. The results indicate that the Bi could′t deposit on cathode when copper electrolysed at common current density i=200 A·mol/L^-2 and t=60 ℃. Bi³⁺ scarcely effected on the crystal orientation (220) of copper deposition. High concentration Bi³⁺ in the electrolyte promoted (220) growth and inhibited the other crystal orientation growth. Bi³⁺ effected on electrocrystal formation and the cell …

Mechanism Of Electrodeposition Of Cu/Co Multilayer Thin Films, Jiangyun Xue, Jixun Wu, Dejun Yang

Journal of Electrochemistry

The mechanism of electrodeposition of Cu/Co multilayer thin films has been studied by means of potentodynamic sweep, cyclic voltammetry sweep and AC impendance. The results indicated that the copper deposition is mass transfer controlled process and the cobalt deposition is related to the absorbed intermediate species such as Co(OH)_ads. The cobalt ions first form Co(OH)_ads, then was deoxygenated to cobalt on the electrode surface.

Photoluminescence Of Photoelectrochemically Etched N+-Si, Guozheng Li, Chengqian Zhang, Xiumei Yang

Journal of Electrochemistry

PS layer on n⁺-Si with (111) orientation prepered by means of photoelectrochemically etched has photo-luminescent (PL) ability like PS layer on usual n-Si. The data of PL spectra and quenching are given.

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 13, Number 9, November 1997, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A twelve page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Searches For Scalar Top And Scalar Bottom Quarks At Lep2, Barate, R.; Et Al., M. Thulasidas

Research Collection School Of Computing and Information Systems

Searches for scalar top and bottom quarks have been performed with data collected by the ALEPH detector at LEP. The data sample consists of 21.7 pb−1 taken at √ s = 161, 170, and 172 GeV and 5.7 pb−1 taken at √ s = 130 and 136 GeV. No evidence for scalar top quarks or scalar bottom quarks was found in the channels ˜t → cχ, ˜t → bℓν˜, and b˜ → bχ. For the channel ˜t → cχ a limit of 67 GeV/c 2 has been set on the scalar top quark mass, independent of the mixing angle between …

Simulation Study Of Learning Automata Games In Automated Highway Systems, Cem Unsal, Pushkin Kachroo, John S. Bay

Electrical & Computer Engineering Faculty Research

One of the most important issues in Automated Highway System (AHS) deployment is intelligent vehicle control. While the technology to safely maneuver vehicles exists, the problem of making intelligent decisions to improve a single vehicle’s travel time and safety while optimizing the overall traffic flow is still a stumbling block. We propose an artificial intelligence technique called stochastic learning automata to design an intelligent vehicle path controller. Using the information obtained by on-board sensors and local communication modules, two automata are capable of learning the best possible (lateral and longitudinal) actions to avoid collisions. This learning method is capable of …

Stratospheric Loading Of Sulfur From Explosive Volcanic Eruptions, Gregg J. Bluth, William I. Rose, Ian E. Sprod, Arlin J. Krueger

Department of Geological and Mining Engineering and Sciences Publications

This paper is an attempt to measure our understanding of volcano/atmosphere interactions by comparing a box model of potential volcanogenic aerosol production and removal in the stratosphere with the stratospheric aerosol optical depth over the period of 1979 to 1994. Model results and observed data are in good agreement both in magnitude and removal rates for the two largest eruptions, El Chicho´n and Pinatubo. However, the peak of stratospheric optical depth occurs about nine months after the eruptions, four times longer than the model prediction, which is driven by actual SO2 measurements. For smaller eruptions, the observed stratospheric perturbation is …

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 13, Number 8, October 1997, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A twelve page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Santa Clara Magazine, Volume 39 Number 3, Autumn 1997, Santa Clara University

Santa Clara Magazine

6 -THE ART OF AN LNTEGRATED EDUCATION How the University connects learning and living, knowing and acting. By Paul Locatelli, S.J., '60

10 - DOUBLE OR NOTHING The University's resident experts discuss the pros and cons of cloning. By Robin K Sterns, Ph.D. Illustrations by Dug Waggoner

17 - SCU: BLUEPRINT FOR THE FUTURE The face of the campus is changing. In the near future six new structures will rise at SCU. By Susan Vogel

23 - SHEDDING LIGHT ON THE HEART OF DARKNESS Two photographers illuminate a shameful period in American history. By Christiaan T. Lievestro, Ph.D.

1997 Scholars And Artists Bibliography, Michael Schwartz Library, Cleveland State University, Friends Of The Michael Schwartz Library

Scholars and Artists Bibliographies

This bibliography was created for the annual Friends of the Michael Schwartz Library Scholars and Artists Reception, recognizing scholarly and creative achievements of Cleveland State University faculty, staff and emeriti

Selective Cvd Growth Of Diamond Crystals On Tungsten, Charles Randal Cole

Electrical & Computer Engineering Theses & Dissertations

Typical field emitters consist of sharp metal tips which usually have a short life due to erosion and contamination. To improve the performance of regular field emitters, diamond can be placed on the emitter tip. This is done by selectively growing diamond on tungsten tips using chemical vapor deposition (CVD) processing. Diamond exhibits negative electron affinity, so that electrons will be emitted by properly biasing the tip.

To obtain single crystal growth right at the tip, a cantilever controlled nucleation method was developed which worked better than other methods. Surface preparation was also important to the growth process. An oxide …

Formal Specification Of Fragmentation And Reassembly In Ipv6, Ibrahim Sahin

Electrical & Computer Engineering Theses & Dissertations

Development and implementation of a networking standard such as the new Internet Protocol (IPv6) is a very difficult process. Different implementations of the standard must be fully compatible to allow different computers to communicate with each other. However, standards are often ambiguous, frequently a result of providing specifications in the English language. A more formal specification could assist in the design of systems. This thesis demonstrates that capability using the Prototype Verification System (PVS).

In this thesis study, a formal specification for fragmentation and reassembly in IPv6 was created to provide a tool for the standardization of IPv6 using PVS. …

A Novel Laboratory Course On Advanced Chemical Engineering Experiments, Jochen A. Lauterbach, S. White, X. Lui, G. M. Bodner, W. N. Delgass

Faculty Publications

The chemical engineering curriculum in the United States has trained generations of technical experts who have successfully optimized chemical processes and products once they entered the chemical industry. The U.S. chemical industry, however, has entered a critical stage in which it must be able to create new and differentiated value through technical innovations that arc essential for long-term survival. This innovation process will require new skills that go far beyond the traditional expertise for the optimization of tasks possessed by young chemical engineers. The innovators must be able to identify new opportunities, explore the boundaries of technology, evaluate critical issues, …

Shock Waves In Nonequilibrium Gases And Plasmas, William M. Hilbun

Theses and Dissertations

An analysis and assessment of three mechanisms describing plasma/shock wave interactions was conducted under conditions typically encountered in a weakly ionized glow discharge. The mechanisms of ion-acoustic wave damping, post-shock energy addition and thermal inhomogeneities were examined by numerically solving the Euler equations with appropriate source terms adapted for each mechanism. Ion-acoustic wave damping was examined by modeling the partially ionized plasma as two fluids in one spatial dimension using the Riemann problem as a basis. Post-shock energy addition in the form of nonequilibrium vibrational energy relaxation was also examined in one spatial dimension using the Riemann problem as a …

Modeling And Comparison Of Wormhole Routed Mesh And Torus Networks, Ronald I. Greenberg, Lee Guan

Computer Science: Faculty Publications and Other Works

2D-mesh and torus networks have often been proposed as the interconnection pattern for parallel computers. In addition, wormhole routing has increasingly been advocated as a method of reducing latency. Most analysis of wormhole routed networks, however, has focused on the torus and the broader class of k-ary n-cubes to which it belongs. This paper presents a performance model for the wormhole routed mesh, and it compares the performance of the mesh and torus based on theoretical and empirical analyses.

Optically Transparent Composite Material And Process For Preparing Same, D. E. Day, James O. Stoffer, John M. Barr

Materials Science and Engineering Faculty Research & Creative Works

Glass ribbon-reinforced transparent polymer composites which provide excellent optical transparency and a low distortion level over a wide temperature range while exhibiting superior mechanical properties as compared to non- reinforced polymer counterparts, and equivalent properties as compared to glass fiber-reinforced counterparts.

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 13, Number 7, September 1997, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A ten page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Effect Of Bmp Implementation On Storm Flow Quality Of Two Northwestern Arkansas Streams, Dwayne R. Edwards, Tommy C. Daniel, H. Don Scott, Phillip A. Moore Jr., John F. Murdoch, Paul F. Vendrell

Biosystems and Agricultural Engineering Faculty Publications

The effectiveness of management practices in improving quality of runoff from agricultural land areas has been reported based primarily on results from plot- and field-scale studies. There is limited information available on watershed scales, particularly when the dominant agricultural land use is pasture. The objective of this study was to determine whether a program of Best Management Practice (BMP) implementation in the Lincoln Lake watershed of northwestern Arkansas was effective in reducing storm stream flow concentrations and mass transport of nitrate nitrogen (NO₃-N), ammonia nitrogen (NH₃-N), total Kjeldahl nitrogen (TKN), ortho-phosphorus (PO₄-P), total phosphorus …

A Measurement Of The Qcd Colour Factors And A Limit On The Light Gluino, Barate, R.; Et Al., M. Thulasidas

Research Collection School Of Computing and Information Systems

Using data collected from 1992 to 1995 with the ALEPH detector at LEP, a measurement of the colour factor ratios CA/CF and TF /CF and the strong coupling constant αs = CFαs(MZ)/(2π) has been performed by fitting theoretical predictions simultaneously to the measured differential two-jet rate and angular distributions in four-jet events. The result is found to be in excellent agreement with QCD, {fx4-1} Fixing CA/CF and TF/CF to the QCD values permits a determination of αs(MZ) and ηf, the number of active flavours. With this measurement the existence of a gluino with mass below 6.3 GeV/c2 is excluded at …

Parameter Estimation For Real Filtered Sinusoids, Daniel R. Zahirniak

Theses and Dissertations

This research develops theoretical methods for parameter estimation of filtered, pulsed sinusoids in noise and demonstrates their effectiveness for Electronic Warfare EW applications. Within the context of stochastic modeling, a new linear model, parameterized by a set of Linear Prediction LP coefficients, is derived for estimating the frequencies of filtered sinusoids. This model is an improvement over previous modeling techniques since the effects of the filter and the coefficients upon the noise statistics are properly accounted for during model development. From this linear model, a relationship between LP coefficient estimation and Maximum Likelihood ML frequency estimation is derived and several …