Engineering Commons^™

Convergence Classes And Spaces Of Partial Functions, Anthony K. Seda, Roland Heinze, Pascal Hitzler

Computer Science and Engineering Faculty Publications

We study the relationship between convergence spaces and convergence classes given by means of both nets and filters, we consider the duality between them and we identify in convergence terms when a convergence space coincides with a convergence class. We examine the basic operators in the Vienna Development Method of formal systems development, namely, extension, glueing, restriction, removal and override, from the perspective of the Logic for Computable Functions. Thus, we examine in detail the Scott continuity, or otherwise, of these operators when viewed as operators on the domain (X → Y) of partial functions mapping X into …

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 18, Number 2, October 2001, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

An eight page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

On Clustering And Retrieval Of Video Shots, Chong-Wah Ngo, Ting-Chuen Pong, Hong-Jiang Zhang

Research Collection School Of Computing and Information Systems

Clustering of video data is an important issue in video abstraction, browsing and retrieval. In this paper, we propose a two-level hierarchical clustering approach by aggregating shots with similar motion and color features. Motion features are computed directly from 20 tensor histograms, while color features are represented by 30 color histograms. Cluster validity analysis is further applied to automatically determine the number of clusters at each level. Video retrieval can then be done directly based on the result of clustering. The proposed approach is found to be useful particularly for sports games, where motion and color are important visual cues …

An Object-Oriented Resource Pool Model In Support Of Discrete Event Simulations, Srinivas Gullapalli

Electrical & Computer Engineering Theses & Dissertations

The proper distribution of resources is a key factor in simulation. Resources provide the supporting facilities, equipment, and personnel for carrying out activities. The number of resources has a direct impact on the overall effectiveness of the simulation as it does in real life. If the number is insufficient, it generally takes more time for the process to complete. On the other hand, if the number is too high, the cost incurred on the resources will be unnecessarily large. Therefore, the count should be a compromise between the two extremes.

In this thesis, an attempt is made to generalize the …

Computational Fluid Dynamic Study Of A Nascar Winston Cup Series Race Car, Terry L. Meek Jr.

Mechanical & Aerospace Engineering Theses & Dissertations

Since the goal of NASCAR racing is to win and since drag is a force the vehicle must overcome, a thorough understanding of the drag generating airflow around and through the automobile is greatly desired. The external airflow contributes to most of the drag that a car experiences and most of the downforce the vehicle produces. Therefore, an estimate of the vehicle's performance may be evaluated using a computational aerodynamics model. This thesis presents a computational fluid dynamic (CFD) analysis of a NASCAR Winston Cup series race car to investigate the salient flow characteristics.

Before a computational analysis could be …

On Misorientation Distribution Evolution During Anisotropic Grain Growth, Elizabeth A. Holm, Gregory N. Hassold, Mark A. Miodownik

Physics Publications

In order to study the development of texture and boundary character during annealing, three-dimensional grain crystallography and crystallographically mediated grain boundary properties were incorporated into a finite temperature Monte Carlo model for grain growth. Randomly textured microstructures evolve normally, with growth exponent n=0.96. While texture remains random, the steady-state boundary misorientation distribution favors low-angle boundaries. To first order, low-angle boundaries increase by lengthening, not by proliferating. In contrast, microstructures with a strong single-component texture develop four-grain junctions and highly curved grain boundaries, which alter evolution. The boundary misorientation distribution narrows and shifts to low angles, and no steady state …

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 18, Number 1, September 2001, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A twelve page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Determining Matric Stress With The Modified Cam Clay Energy Relationship, Richard A. Rohlf, Larry G. Wells

Biosystems and Agricultural Engineering Faculty Publications

The stress generated by matric suction, or matric stress, was determined at points along the stress path with an analytical and experimental procedure based on the modified Cam clay energy relationship. Matric stress was found to be approximately constant at large strain for constant water content triaxial compression tests. Matric stress was included in both shear and volume relationships in a critical–state soil model that employed the modified Cam clay yield function. Shear was modeled with a constant matric stress. Slope of the normal compression and recompression lines was adjusted for matric stress using a state function that expressed matric …

Theater-Level Stochastic Air-To-Air Engagement Modeling Via Event Occurrence Networks Using Piecewise Polynomial Approximation, David R. Denhard

Theses and Dissertations

This dissertation investigates a stochastic network formulation termed an event occurrence network (EON). EONs are graphical representations of the superposition of several terminating counting processes. An EON arc represents the occurrence of an event from a group of (sequential) events before the occurrence of events from other event groupings. Events between groups occur independently, but events within a group occur sequentially. A set of arcs leaving a node is a set of competing events, which are probabilistically resolved by order relations. An important EON metric is the probability of being at a particular node or set of nodes at time …

Environment-Induced Degradation And Crack-Growth Studies Of Candidate Target Materials: Aaa Task-4 Quarterly (June 1 – August 31, 2001) Report, Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The subject task entitled “Hydrogen-Induced Embrittlement of Candidate Target Materials for Applications in Spallation-Neutron-Target Systems” had commenced during the quarter ending on August 31, 2001. A research account has been established, contracts for both faculty and students have been prepared, and efforts are well underway to embark on the related research activities, as proposed.

As the title of this project implies, the primary objective of this task is to evaluate the effect of hydrogen on environment-assisted cracking of candidate materials for applications in spallationneutron- target (SNT) systems such as accelerator production of tritium (APT) and accelerator transmutation of waste (ATW). …

Design And Analysis For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides: Quarterly Report 5/15/01-8/15/01, Yitung Chen, Darrell Pepper, Randy Clarksean

Fuels Campaign (TRP)

No abstract provided.

Current Oscillations In The System Of Carbon Steel/Phosphoric Acid/Platinum, Shao-Yuan Shi, Jin-Ping Wu, Jing Liu, An Lin

Journal of Electrochemistry

The periodic,aperiodic, chaotic and mixed-mode oscillations can occur in the process of the anodic electrodissolution of carbon steel in the solution of dilute phosphoric acid. More plentiful dynamic behaviors can be found in this system compared with the system of Fe/H₃PO₄/Pt.

The Activation Mechanism Of Al Alloys With Tin And Gallium In Alkaline Electrolytes, Zhen-Ya Li, Ling Yi, Zhi-Hui Liu, Lin Yang, Jing-Xin Su, Yan-Ying Chen

Journal of Electrochemistry

The major reason for Al-anode's activation is that Ga and Sn deposit on the aluminum surface and form activated points. The Al-Sn and Al-Ga binary alloys can't be activated in alkaline medium. During the dissolution of the Al-Sn-Ga ternary anode, Sn and Ga dissolve into the solution and transform into ions. After the Sn ions deposit on the surface of Al-anode, the Ga ions will deposit on Sn. The higher activation of the polynary alloy anode is caused by much more new activated points composed of Ga-Sn alloy being continually formed. Ga- Sn alloy with low melting point deposited on …

A New Method For Impregnating Nafion Solution Into The Electrode Of Pemfc, Qian Tang, Ming Han, Bao-Lian Yi, Zhi-Yin Lin

Journal of Electrochemistry

We have developed a new method for impregnating Nafion solution into the catalyst layer of homemade hydrophobic electrode using capillary process. Those electrodes show better performance and higher utilization of catalyst (detected by CV and TEM) than traditional spray method in PEMFC. According to the results of SEM photograph and linear-analysis of sulfur and platinum for the electrode cross-section, we can conclude that the resin is uniform in the catalyst layer and has almost same depth as catalyst in the impregnated electrode. While in traditional method resin is not uniform in the catalyst layer and penetrates into the diffusion layer, …

Immobilization Of Long-Strand Dna Onto Gold Surface And Electrochemical Labeling Of Hybridization Of Dna, Jian-Zhang Zhou, Ling-Ling Wu, Li-Qin Dong, Zhong-Yu Lin, Jia-Wei Yan, Ping Dong, Yue Bao, Zhong-Hua Lin

Journal of Electrochemistry

Poly(diallyldimethylammonium chloride)(PDDA) was used to facilitate long strand DNA immobilization onto gold surface using self assembly method. Characterization of the PDDA self assembled film and subsequently immobilized DNA were carried out by Diffuse Reflectance Infrared, XPS, STM and electrochemical measurements. Hybridization of DNA was labeled by electrochemical method.

The Coulostatic Method For Evaluating Corrosion In Reinforced Concrete, Yong-Tao Zhao, Jian-Hua Wu, Chang-Jiu Zhao

Journal of Electrochemistry

In the present paper, the application of the coulostatic method to the corrosion of steel in concrete was reviewed. By comparing with other electrochemical techniques, the results obtained in the previous work reveal that the coulostatic method is an interesting alternative to the usual procedures for estimation of corrosion rate, and is better than them in some respects. The main advantages are as follows. The signal to be used can be instantaneous and as small as desired, so the electrode is minimally perturted during the measuring process. In addition, it is as rapid and quantitative, and at least as reliable …

Characterization And Electrochemical Investigation Of Boron-Doped Mesocarbon Microbeads Anode Materials For Lithium-Ion Battery, Mao-Hui Chen, Guo-Tao Wu, Guang-Ming Zhu, Jin-Kua You, Zu-Geng Lin

Journal of Electrochemistry

The anodic performances of boron doped and undoped mesocarbon microbeads(MCMBs) were comparatively studied and the structures were characterized by XPS, SEM, XRD and electrochemical measurements. It was found that boron doping samples greatly increased the degree of graphitization and the crystallite size, leading to quite different morphology. Electrochemical discharge/charge cycle tests indicate that lithium intercalation occurred at a little higher potential for the boron doped MCMBs, being attended by greater irreversible capacity loss.

Microstructure And Electrochemical Properties Of The Melt-Spinning Zr0.9Ti0.1(Ni, Co, Mn, V)2.1 Alloy, Ming-Fen Wen, Yu-Chun Zhai, Lian Chen, Min Tong, Hua Zhen, Rong-Jun Ma

Journal of Electrochemistry

The microstructure and electrochemical properties of Zr_0.9Ti_0.1(Ni,Co,Mn,V)_2.1 alloys prepared by both the melt-spinning method and the conventional induction melting were investigated. XRD studies show that Zr_0.9Ti _0.1(Ni,Co,Mn,V)_2.1 alloys at as-cast, melt-spinning and annealing are all face center cubic structure with C₁₅ laves phase, the higher the melt-spinning rate, the more the amorphous content. The electrochemical measurements show that melt-spinning alloys have better active behavior, low discharge capacity (< 280 mAh/g); but after annealed, the alloys are activated completely with 30 cycles, the capacities about 340 mAh/g are higher than those of as-cast and melt-spinning alloys; the annealec alloys have a better cycle stability than that of as-cast alloy, and the higher the melt-spinning rate is, the more stable the alloy becomes; at 300 mAh/g current density, the capacity of annealed 40 m/s alloy is up to 85% of the maximum capacity after 800 cycles, the capacity decay rate is about 6.9%.

Charge/Discharge Characteristics And Structural Changing Of Spherical β-Ni(Oh)2 Prepared From Different Nickel Salt, Shu-Ting Yang, Yan-Hong Yin, Hong-Jun Chen, Jun-Hua Jia, Ming-Chum Zhang, Li Ding

Journal of Electrochemistry

Spherical β-Ni(OH)₂ was prepared from different nickel salt by homogeneous complexing precipitation method. Its charge/discharge and cyclic voltammetry properties were studied. The authors found that there are many differences in the electrochemical properties of the prepared Ni(OH)₂.The specific capacity, cycling life and the discharging plateau of the material prepared from NiSO₄ were superior to those of the material prepared from Ni(NO₃)₂. The reasons of the differences were analyzed by XRD and FTIR measurements, which will become abasis for the selection of raw materials.

In Situ Ftir Reflection Spectroscopy Of Bioelectrode, Sa-Ying Dong, Guang-Yu Zhao, Yuzhu Gao, Guang-Zhang Chen, Ming-Xiang Lv

Journal of Electrochemistry

In situ FTIR reflection spectroscopy was used to study mediated enzyme electrode and immunoelectrode. We determined and analyzed IR characteristic spectra of GOD and glucose by the use of potential difference spectra and single beam subtractive spectra. At last, we explored the IR absorption characters of enzyme-immunoelectrode.

The Influence Of Membrane Resistance On The Electrochemical Behavior Of Gold Electrode Modified By Self-Assembled Monolayer, Xiao-Li Cui, Zhi-Yu Jiang

Journal of Electrochemistry

The electrochemical behavior of gold electrode modified by hexadecanethiol self-assembled monolayer (SAM) in the solution of Fe(CN)₆^3-/Fe(CN)₆^4- was investigated by cyclic voltammetry and ac impedance spectroscopy. The pinhole-free SAM-modified gold electrode has excellent blocking properties to the interfacial electron transfer from redox couple in solution to the substrate. The current increased exponentially with the overpotential at the high potential region. A good linear relationship between ln(I/η) and η_1/2 was observed. A model system Au/SAM/Hg was constructed and its I～V curve was measured. Similar phenomena were observed. There was also a linear relationship between ln(I/V) …

Codeposition And Corrosion Resistance Of Nickel-Cerium-Phosphorus Amorphous Alloys, Jiang Liu, Xiong Jiang, Lin-Cai Jiang, Ze-Shan Zhu

Journal of Electrochemistry

The possibility of electrodeposition of rare earth alloys from aqueous bath was investigated using varous techniques such as linear potential sweeping, cyclic voltammetry, electrodepositon at constant potential etc. The Ni-Ce-P alloys with different cerium content were electrodeposited from a weakly acidic solution containing CeCl₃, NaH₂PO₂ and so on the crystal structure and component were characterized by XPS, AES, XRD and SEM observation. The codeposits were found to be more highly corrosion resistent than that of Ni-P amorphous alloys by measuring polarization resistance and corrosion potential. The effects of codeposition conditions on the corrosion resistance were …

Determination Of Hydrogen Diffusion Coefficient In Metal Hydride Electrode With Electrochemical Impedance Spectroscopy, Xian-Xia Yuan, Nai-Xin Xu

Journal of Electrochemistry

Electrochemical impedance spectroscopy was employed to determine the hydrogen diffusion coefficient in MlNi _3.75Co _0.65 Mn_0.4Al_0.2 metal hydride electrode with various states of charge (SOC) at room temperature and with 50% SOC at various temperatures. It was found that hydrogen diffusion coefficient in this electrode decreases with the increase in SOC at ambient temperature, and for the electrode with 50% SOC, hydrogen diffusion coefficient increases with the increase of temperature and the activation energy for hydrogen diffusion in it is 35 kJ/mol.

Electrochemical Impedance Spectroscopy Study On A3 Steel In Anti-Corrosive Pigment Extract Solution, Zhi-Jun Gu, Yong-Gui Liao, Zhi-Gang Zhang, Qi-Long Guo, Fang-Teng Su, Wen-Yun Hu, Yan-Zhen Chen

Journal of Electrochemistry

The corrosion behaviors of A₃ steel in different pH, 3.5%NaCl, modified zinc phosphate and aluminum triphosphate extract solutions have been studied by EIS. Results show:(a) The resistance increases with the increase of pH value under the same circumstances, but the capacity is the reverse. (b) Zinc phosphate, because of its low solubility, shows no inhibitive performance for A₃ steel in 3.5% NaCl extract solutions. (c) Aluminum triphosphate has good inhibitive performance for A₃ steel in 3.5% NaCl extract solutions at a pH of 6, probably because the triphosphate ion can complex with the corrosion-product, such as ferric …

Analysis Of Corrosion Of Steel By Lead Bismuth Eutectic, John Farley, Dale L. Perry

Transmutation Sciences Materials (TRP)

The goal is to achieve a basic understanding of the corrosion of stainless steel by Lead Bismuth Eutectic (LBE), which has been proposed for use in the transmuter as both a coolant and as a sputtering target.

Nuclear Criticality Analyses Of Separations Processes For The Transmutation Fuel Cycle, William Culbreth, Pang Tao

Separations Campaign (TRP)

To mitigate the waste created by conventional fission reactors, spent nuclear fuel must be mechanically separated from its cladding. For the development of fuel processing technology to support the Advanced Accelerator Applications (AAA) Program, aqueous and pyrochemical processes will be used to further separate technetium and iodine, uranium and the higher actinides (see Figure 1 for an example of the process layout)1. The higher actinides, including plutonium, americium, curium, and neptunium will be separated from the waste to facilitate their fabrication into new fuel for placement in a transmuter. High-energy neutrons generated by spallation in the transmuter break down these …

Radiation Transport Modeling Of Beam-Target Experiments For The Aaa Project, William Culbreth

Reactor Campaign (TRP)

The AAA program will rely on the use of an accelerator-based transmuter to expose spent nuclear fuel to high-energy neutrons. The neutron flux will be sufficient to activate or fission the long-lived isotopes of Tc, I, Pu, Am, Cm, and Np that present a significant safety hazard in commercial spent fuel. Transmuter fuel will be subcritical and a high-energy proton accelerator is needed to maintain the necessary neutron flux through the use of a neutron spallation target. The maximum neutron energy produced by spallation (~ 600 MeV) is significantly higher than that produced by a commercial light water reactor (~ …

Design And Evaluation Of Processes For Fuel Fabrication, Georg F. Mauer

Fuels Campaign (TRP)

The objective of this project is the design and evaluation of manufacturing processes for transmuter fuel fabrication. A detailed design description for the manufacturing of each candidate fuel type would support the informed selection of fuel for a transmutation system. We will collect pertinent manufacturing and process-related information and create an information database that will document the design, operations, and cost implications of various fuel choices. Fabrication processes for different fuel types will likely differ in terms of equipment types, throughput, and cost.

Year 1 of the project will be devoted to the analysis and assessment of the multiple steps …

Development Of A Systems Engineering Model Of The Chemical Separations Process, Yitung Chen, Darrell Pepper, Randy Clarksean

Separations Campaign (TRP)

Two activities are proposed: the development of a Systems Engineering model and the refinement of the Argonne code AMUSE (Argonne Model for Universal Solvent Extraction). The detailed systems engineering model will be the start of an integrated approach to the analysis of the materials separations associated with the national AAA program. A second portion of the project will streamline and improve an integral part of the overall systems model, which is the software package AMUSE. AMUSE analyzes the UREX process and other related solvent extraction processes and defines many of the process streams that are integral to the systems engineering …

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823 For Transmutation Applications, Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The purpose of this project is to evaluate the elevated temperature tensile properties of Alloy EP- 823, a leading target material for accelerator-driven waste transmutation applications. This alloy has been proven to be an excellent structural material to contain the lead-bismuth-eutectic (LBE) nuclear coolant needed for fast spectrum operations. However, very little data exist in the open literature on the tensile properties of this alloy. The selection of Alloy EP-823 as the test material in the proposed task is based on the recommendation of our collaborator at the Los Alamos National Laboratory (LANL). The test material will be thermally treated …