Engineering Commons^™

Analyses On Spm Images And Theoretical Investigations On Oxygen Vacancy Concentration Of Light-Induced Nanostructured Titania Super Hydrophilic Films, Ren-Jie Zeng, Zhong-Hua Lin, Zhi-Min Fang

Journal of Electrochemistry

A typical nanostructured titania super hydrophilic film was chosen for general char2 acterization employing a Scanning Probe Microscope (SPM) and an electrochemical measurement system. Following from the principles of the solid state chemistry and nanomechanics, intensive theoretical. analyses on the SPM images, the oxygen vacancy concentration sand the mechanism of the super hydrophilicity were made; further illuminationsona reactionequation of titania defect formation, a tentative universal surface physical mode for the wet-ability, a concept, amphiphobic-ity, and surface design were carried out after the author’ sprevious introduction and proposal in the end of 1999.

The Research Of Organic Electrolyte Solutions For Li-Ion Batteries, Quang-Chao Zhuang, Shan Wu, Wen-Yuan Liu, Zhao-Da Lu

Journal of Electrochemistry

The characteristics of organic electrolyte solutions and its influences on the ion conductivity are summarized. The chemistry and electrochemistry of organic electrolyte solutions and characteristics of ordinary organic solvents are introduced. Progresses in studies of organic electrolyte solutions such as electrolyte salts, organic solvents, additives in recent years are reviewed, current situation of the studies of organic electrolyte solutions were also discussed.

New Progress Of Intrinsic Conducting Polymers' Application, Wan Chen, Cheng-Hao Liang, Yang Xie

Journal of Electrochemistry

As a kind of functional polymer, the intrinsic conducting polymer has the special chemical, electrochemical and optical properties. So it has wide application such as batteries, electromagnetic wave shielding, electroluminescent etc. Recent development and the problems of the intrinsic conducting polymers' application were briefly reviewed in this paper.

Thermal Effects On The Measurement Of Photocurrent At Anodic Films On Silver Electrode, Yuan Gu, Zhi-Yu Jiang

Journal of Electrochemistry

The influence of heat on the photocurrent of Ag electrde in alkaline solution was investigated by measuring photocurrent, photothermal signal and thermal current under the irraiation of laser beams with the wavelengths of 488 nm and 532 nm. It was found the photocurrent atthe Ag₂O film was influenced by the temperature change at the electrode surface under the irradiation of light. During the electrochemical transfer between Ag, Ag₂O and AgO in the anodic filmthe surface temperature changed obviously due to the different absprptance of the surface subrstances.It was suggested by comparing the voltammograms, photocurrent curves and …

Study Of Hydrogen Diffusion Behavior In Hydrogen Storage Alloy Mlni3.75Co0.65Mn0.4Al0.2 With Potential Step Method, Xian-Xia Yuan, Nai-Xin Xu

Journal of Electrochemistry

Potential step method was employed to study the hydrogen diffusion behavior in hydrogen storage alloy MlNi_3.75 Co_0.65Mn_0.4Al_0.2 with various depth of discharge (DOD) at ambient temperature and with 50% DOD at various temperatures. It was found that hydrogen diffusion cofficient in the hydrogen storage alloy increaes with the increase in DOD at ambient temperature. and for the alloy with 50% DOD, the hydrogen diffusion coefficient increases with the increase in temperature and the activation energy for hydrogen diffusion in the alloy is 19.87 kJ/mol.

Research Progress On Proton Exchange Membranes Of Fuel Cells, Jing-Rong Yu, Dan-Min Xing, Fu-Qiang Liu, Jian-Guo Liu, Bao-Lian Yi

Journal of Electrochemistry

The proton exchange membrane fuel cells (PEMFC) use proton exchange membranes(PEM) as their electrolytes. The performance of the PEMFC is strongly dependent on the characteristics of the PEM. In this paper, the requirements of the PEM utilized in the PEMFC were analyzed. The per-fluorinated, partially fluorinated and non-fluorinated PEM were introduced respectively. The structures, preparation, properties of the various types of PEM and their applications in the PEMFC were also discussed in detail.

The Influence Of Synthesis Conditions On The Electrochemical Properties Of Spinel Limn2O4, Jun-Feng Xu, Zhi-Yu Jiang

Journal of Electrochemistry

The electrochemical properties of spine LiMn₂O₄ synthesized via a solid state reaction were investigated. Electrolysis MnO₂(EMD), Li₂CO₃ ,LiOH and LiNO₃ were used as the initial materials. It was found that the electrochemical properties of LiMn₂O₄ were strongly influenced by the synthesis conditions. The LiMn₂O₄ sample sprepared via the reactionof EMD and LiNO₃ showed the best properties for a lithiumion intercalation reaction. The procedure includes two steps:pretreatment at 280 ℃ for 6 hours to initiate the permeation of melting LiNO₃ into the microporesof EMD …

Adsorption And Oxidation Of Methanol On Pt And Sb, S Modified Pt Electrodes Using Cyclic Voltammetry And Eqcm, Guo-Liang Chen, Sheng-Pei Chen, Heng Lin, Xing-Hong Zheng, Shi-Gang Sun

Journal of Electrochemistry

The processes of adsorption and oxidation of methanol on Pt, Pt/Sb ad and Pt/S ad electrodes were studied by using cyclic voltammetry and electrochemical quartz crystal microbalance (EQCM). The results demonstrated that the oxidation of methanol depends strongly on oxidation states of electrode surface. Sb adatoms on Pt surface can adsorb oxygen at relatively low potentials, and exhibit catalytic effects for methanol oxidation. In contrast to Pt electrodes, the oxidation peak potential of methanol in this case negatively shifted to about 130 mV. In a contrary, the oxidation of S_ad atoms consumes oxygen species of Pt electrode surface. As …

Study On Electrochemical Behavior Of Copper In Nh3 ·H2O Solution Medium Including K3[Fe(Cn)6] During Cmp, Yue-Hua Hu, Han-Wei He, Ke-Long Huang

Journal of Electrochemistry

Influence of medium pH value and passivator concentrations on the copper passivation and CMP process were studied by electrochemical measurement technologies, relations of the film thickness and tightness with polishing process and polishing rates were investigated. Electrochemical variables influencing polishing process and rates were found out. Electochemical mechanism of polishing processes were explained by corrosion potential and corrosion current density. A recipe of K₃[Fe(CN)₆] as passivator and nano sized γ-Al₂O₃ as abrasives in medium of NH₃·H₂O solution was confirmed reasonable. It is shown that the conditions of polishing process …

Study On The Anticorrosion Of Ld-2 Compound Inhibitor On Reinforcing Steel In Seawater, Rong-Gui Du, Zhou-Cheng Wang, Ruo-Shuang Huang, Rong-Gang Hu, Bing Zhao, Jian-Guang Tan, Chang-Jian Lin

Journal of Electrochemistry

The effect of LD-2 compound inhibitor developed in our laboratory on its anticorrosion action on the reinforcing steel in concrete immersed in seawater was shown in this paper. The corrosion behavior of the reinforcing steel in seawater was studied using electrochemical techniquesand immersion tests. The polarization curve of the reinforcing steel immersed in seawater showedthe free corrosion potential of the steel increased by 0. 220 V (vs. SCE), and the corrosion current decreased by two orders of magnitude by adding 25 g⋅L^-1 compound inhibitor to the seawater. The potentiodynamic anodic polarization curve of reinforcing steel in the seawater with …

Environment-Induced Degradation And Crack-Growth Studies Of Candidate Target Materials: Aaa Task-4 Quarterly (September 1 – November 30, 2001) Report, Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The primary objective of this task is to evaluate the effect of hydrogen on environment-assisted cracking of candidate materials for applications in spallation-neutron-target (SNT) systems such as accelerator production of tritium (APT) and accelerator transmutation of waste (ATW). The materials selected for evaluation and characterization are martensitic stainless steels including HT- 9, EP 823 and 422. The susceptibility to stress corrosion cracking (SCC) and hydrogen embrittlement (HE) of these alloys will be evaluated in environments of interest using tensile specimens under constant load and slow-strain-rate (SSR) conditions. The extent and morphology of cracking of these alloys will further be evaluated …

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823: Task 10, First Quarter Report, Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The objective of this task is to evaluate the elevated temperature tensile properties of Alloy EP-823, a leading target material for accelerator-driven waste transmutation applications. The test material will be thermally treated prior to evaluation of its tensile properties at temperatures relevant to the transmutation applications. The deformation characteristics of tensile specimens, upon completion of testing, will be evaluated by surface analytical techniques including scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The overall results are expected to provide a mechanistic understanding of high-temperature deformation behavior of Alloy EP-823 as a function of heat treatment.

Highlights of Accomplishment

• …

Analysis Of Corrosion Of Steel By Lead Bismuth Eutectic, John Farley, Dale L. Perry

Transmutation Sciences Materials (TRP)

We examined stainless samples that were exposed to LBE in experiments conducted by the Russians, under contract to Los Alamos. We examined both corroded and uncorroded samples using the Scanning Electron Microscope (SEM), the Energy Dispersive X-Ray (EDAX) Spectroscopy, and the X-ray Photoelectron Spectrometer (XPS). We found that the surface of the corroded sample is covered by oxygen-containing compounds, presumably mostly iron oxide. In samples exposed for shorter times or lower temperatures, we found that some areas were covered by an oxide layer, and some areas was uncovered. We found that the level of Cr in the uncovered area is …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics: Quarterly Progress Report August 16,2001- November 15, 2001, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The Lead-Bismuth eutectic (LBE) has been determined from previous experimental studies by the Russians and the European scientific community to be a potential material that can be used as a spallation target and coolant for the AAA proposed application.

Properly controlling the oxygen content in LBE can drastically reduce the LBE corrosion to structural steels. However, existing knowledge of material corrosion performance was obtained from point-wise testing with very limited density. The transport of oxygen and corrosion products, their interaction and variation of corrosion/precipitation along the flow are not well understood.

The first subtask of this project involves using a …

Development Of A Systems Engineering Model Of The Chemical Separations Process: Quarterly Progress Report 8/16/01- 11/15/01, Yitung Chen, Randy Clarksean, Darrell Pepper

Separations Campaign (TRP)

The AAA program is developing technology for the transmutation of nuclear waste to address many of the long-term disposal issues. An integral part of this program is the proposed chemical separations scheme.

Two activities are proposed in this Phase I task: the development of a systems engineering model and the refinement of the Argonne code AMUSE (Argonne Model for Universal Solvent Extraction). The detailed systems engineering model is the start of an integrated approach to the analysis of the materials separations associated with the AAA Program. A second portion of the project is to streamline and improve an integral part …

Design And Analysis For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides: Quarterly Progress Report 8/16/01- 11/15/01, Yitung Chen, Randy Clarksean, Darrell Pepper

Fuels Campaign (TRP)

An important aspect of the Advanced Accelerator Applications (AAA) program is the development of a casting process by which volatile actinide element (i.e., americium) can be incorporated into metallic alloy fuel pins. The traditional metal fuel casting process uses an inductively heated crucible. The process involves evacuation of the furnace. The evacuation of the furnace also evacuates quartz rods used as fuel pin molds. Once evacuated the open ends of the molds are lowered into the melt; the casting furnace is then rapidly pressurized, forcing the molten metal up into the evacuated molds where solidification occurs.

This process works well …

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 18, Number 3, November 2001, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

An eight page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Monitoring Subsurface Drainage Flow At Remote Locations, Stephen R. Workman, Stephen F. Higgins, Scott A. Shearer

Biosystems and Agricultural Engineering Faculty Publications

Laboratory evaluations and field results are presented for a slotted weir used to measure discharge from subsurface drains. The head–discharge curve for the vertical slot is a simple power function with an exponent of 1.5. There was excellent agreement (r² > 0.99 and 1:1 slope) between predicted and observed discharge in laboratory testing of 12 test weirs representing five slot widths. The primary advantages of the vertical slot weir are its simplicity, ease of maintenance, and ability to measure small flow rates. Disadvantages include a tendency for the slot to close a small amount over time as a result of …

A Dipolar Coupling Based Strategy For Simultaneous Resonance Assignment And Structure Determination Of Protein Backbones, Fang Tian, Homayoun Valafar, James H. Prestegard

Faculty Publications

A new approach for simultaneous protein backbone resonance assignment and structure determination by NMR is introduced. This approach relies on recent advances in high-resolution NMR spectroscopy that allow observation of anisotropic interactions, such as dipolar couplings, from proteins partially aligned in field ordered media. Residual dipolar couplings are used for both geometric information and a filter in the assembly of residues in a sequential manner. Experimental data were collected in less than one week on a small redox protein, rubredoxin, that was 15N enriched but not enriched above 1% natural abundance in 13C. Given the acceleration possible with partial 13C …

Upper Spokane River Model: Boundary Conditions And Model Setup, 1991 And 2000, Robert Leslie Annear, Chris Berger, Scott A. Wells

Civil and Environmental Engineering Faculty Publications and Presentations

The Washington Department of Ecology is interested in a water quality model for the Upper Spokane River system for use in developing Total Maximum Daily Loads (TMDLs). The goals of this modeling effort are to:

• Gather data to construct a computer simulation model of the Spokane River system including Long Lake Reservoir and the pools behind Nine Mile dam, Upper Falls dam and Upriver dam

• Ensure that the model accurately represents the system hydrodynamics and water quality (flow, temperature, dissolved oxygen and nutrient dynamics)

A hydrodynamic and water quality model, CE-QUAL-W2 Version 3 (Wells, 1997), is being applied …

Capillary Flow In Interior Corners: The Infinite Column, Mark M. Weislogel

Mechanical and Materials Engineering Faculty Publications and Presentations

Capillary flow of a sinusoidally perturbed liquid column in an interior corner of infinite extent is solved using lubrication theory. Due primarily to the length scales selected to nondimensionalize the momentum equation, an analytic time scale governing the settling of the perturbation is determined. The time scale, which is shown to be independent of a steady base state flow, proves useful in rapidly predicting transients for surface settling in certain liquid-bearing tanks of spacecraft employing interior corners for fluids management purposes. The asymptotic analysis is extended to address flows along interior corners whose faces are slightly nonplanar. The generalized formulation …

Lower Willamette River Model: Boundary Conditions And Model Setup, Herman G. Rodriguez, Robert Leslie Annear, Scott A. Wells, Chris Berger

Civil and Environmental Engineering Faculty Publications and Presentations

Water Environment Services of Clackamas County is in the process of planning upgrades on several of its sewage treatment plants which discharge into the Lower Willamette River. The goals of the modeling effort are to:

• Gather data to construct a computer simulation model of the Lower Willamette River system including part of the Lower Columbia River and the Willamette River above the Oregon City Falls; Because of the tidal influence in the Lower Willamette River, portions of the Columbia River that might affect the Lower Willamette River water quality were also modeled. Also, a section of the Willamette River …

Pickup And Delivery Problem With Time Windows: Algorithms And Test Case Generation, Hoong Chuin Lau, Zhe Liang

Research Collection School Of Computing and Information Systems

In the pickup and delivery problem with time windows (PDPTW), vehicles have to transport loads from origins to destinations respecting capacity and time constraints. In this paper, we present a two-phase method to solve the PDPTW. In the first phase, we apply a novel construction heuristics to generate an initial solution. In the second phase, a tabu search method is proposed to improve the solution. Another contribution of this paper is a strategy to generate good problem instances and benchmarking solutions for PDPTW, based on Solomon's benchmark test cases for VRPTW. Experimental results show that our approach yields very good …

Modeling Axisymmetric Optical Precision Piezoelectric Membranes, James W. Rogers Jr.

Theses and Dissertations

The US Department of Defense (DOD), as well as the National Aeronautics and Astronautics Administration (NASA) and the Jet Propulsion Laboratory (JPL) are interested in developing and deploying precise, compliant, light-weight, space-based structures. More specifically, the Air Force’s core competencies ‘Aerospace Superiority’ and ‘Information Superiority’ demand ever-increasing depth and breadth of capability. Whether used for energy transmission or optical reconnaissance, current launch restraints limit rigid space-based optical reflector size. To support this requirement, the Air Force Research Laboratory (AFRL) is developing a large space-based optical membrane telescope. Inflatable reflectors can conceptually break this barrier, but controlling such a compliant structure …

Assessment Of Criticality Safety For Cylindrical Containers To Be Used In The Processing Of Spent Fuel, William Culbreth, Daniel R. Lowe, Jason Viggato

Separations Campaign (TRP)

The UREX process separates uranium from transuranic wastes (TRU) and fission products (FP). Nuclear reactors require fissile isotopes that will absorb neutrons and break apart into smaller nuclei while releasing a large amount of energy as well as multiple neutrons. Fissile isotopes in spent fuel include not only ²³⁵U, but also ²³⁹Pu, ²⁴¹Pu, and several isotopes of americium (Am) and curium (Cm).

TRU contains the actinides with atomic numbers greater than that of uranium. This includes Pu, Np, Am, and Cm. When TRU is separated from uranium, the TRU still poses a significant risk of sustaining a …

2001 Scholars And Artists Bibliography, Michael Schwartz Library, Cleveland State University, Friends Of The Michael Schwartz Library

Scholars and Artists Bibliographies

This bibliography was created for the annual Friends of the Michael Schwartz Library Scholars and Artists Reception, recognizing scholarly and creative achievements of Cleveland State University faculty, staff and emeriti

University Of Nevada, Las Vegas Advanced Accelerator Applications University Participation Program: Quarterly Report, Second Quarter (June To August 2001), Anthony Hechanova

Transmutation Research Program Reports (TRP)

This Quarterly Report is a primary deliverable from the University of Nevada, Las Vegas (UNLV) Advanced Accelerator Applications (AAA) University Participation Program (UPP) Director to the U.S. Department of Energy (DOE) as described in the UNLV AAA proposal.

The UNLV AAA UPP Director implements the program’s administration using staff from the Harry Reid Center for Environmental Studies (HRC) to ensure that work conducted under the UNLV AAA UPP meets program objectives. The UNLV AAA UPP consists of three components: Program Administration, Research Infrastructure Augmentation, and Student Research.

Highly Plasma Etch-Resistant Photoresist Composition Containing A Photosensitive Polymeric Titania Precursor, Tony D. Flaim, Douglas J. Guerrero, Michelle R. Fowler, William Joseph James, Vladimir Petrovsky, Harlan U. Anderson

Chemistry Faculty Research & Creative Works

A composition is derived from an addition polymerizable organotitanium polymer which upon exposure to an oxygen plasma or baking in air, is converted to titanium dioxide (titania) or is converted to a mixed, titanium-containing metal oxide. The metal oxide formed in situ imparts etch- resistant action to a patterned photoresist layer. The composition may also be directly deposited and patterned into permanent metal oxide device features by a photolithographic process.

Santa Clara Magazine, Volume 43 Number 2, Fall 2001, Santa Clara University

Santa Clara Magazine

4 - A GRAND WEEKEND By Adam Breen. At the Grand Anniversary Weekend in June, thousands of alumni, family, and friends gathered to celebrate 150 years of Santa Clara University.

12 - MUSICAL CHAIRS By Jacqueline Tasch. Peter Minowitz loves an audience, whether it is the students in his political science classes or the jazz lovers in local clubs.

14 - ASK THE EXPERTS By Elizabeth Kelley Gillogly '93. Santa Clara University ambassadors help recruit future Broncos.

16 - LESSONS FROM EL SALVADOR By Douglas Sweet. Faculty and students reflect on a spring break "immersion" trip, which for some was …

Reifying Communication At The Application Level, Andrew P. Black, Jie Huang, Jonathan Walpole

Computer Science Faculty Publications and Presentations

Middleware, from the earliest RPC systems to recent Object-Oriented Remote Message Sending (RMS) systems such as Java RMI and CORBA, claims transparency as one of its main attributes. Coulouris et al. define transparency as “the concealment from the … application programmer of the separation of components in a distributed system.” They go on to identify eight different kinds of transparency.

We considered titling this paper “Transparency Considered Harmful”, but that title is misleading because it implies that all kinds of transparency are bad. This is not our view. Rather, we believe that the choice of which transparencies should be offered …