Engineering Commons^™

Test 1808: John Deere 6403 Diesel 9-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 384: John Deere 6120 Syncroplus Diesel 12-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Test 1805: John Deere 9520 18 Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Nebraska Summary: S280 Massey Ferguson 4370, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

A Hybrid System Theoretic Approach For Admission Controller Design In Multimedia Networks, Sarangapani Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

A novel real-time discrete-event admission control (AC) scheme for high-speed networks is proposed with the aim of attaining a desired quality of service (QoS) and high network utilization. The AC uses the available capacity from a novel adaptive bandwidth estimation scheme, a congestion indicator derived from a congestion controller, peak bit/cell rate (PBR/PCR) estimate from new sources, along with the desired QoS metrics, and makes decisions whether to 'admit' or 'reject' new sources. The novel aspect of the proposed approach is the application of hybrid system theory to prove the performance of the admission controller, stability and the development of …

Distributed Power Control In Wireless Communication Systems, Sarangapani Jagannathan, A. T. Chronopoulos, S. Ponipireddy

Electrical and Computer Engineering Faculty Research & Creative Works

Energy efficiency is a measure of performance in wireless networks. Therefore, controlling the transmitter power at a given node increases not only battery operating life, but also overall system capacity by successfully admitting new links. It is essential to find effective means of power control in point-to-point, broadcasting and multicasting scenarios. Wireless networking presents formidable challenges, and we consider the problem of unicast or point-to-point (peer-to-peer) communication in wireless networks in the presence of other nodes. We study the feasibility of admitting new links in an wireless network operating area while maintaining quality of service (QoS), in terms of signal-to-interference …

Study Of Relative Effectiveness Of Features In Content-Based Image Retrieval, S. R. Subramanya, Jui Che Teng, Yongjian Fu

Electrical and Computer Engineering Faculty Research & Creative Works

Content-based retrieval in image databases requires appropriate features of images to be derived and used in the indexing and searching process. Fast and accurate retrieval is crucial from a user point of view. The kinds of features used, their organization in suitable data structures, and the similarity search scheme, directly affect the speed and quality of content-based retrieval. In this paper, we evaluate the relative significance of three different image features - geometry, moments, and Fourier descriptors in the context of content-based retrieval, and present experimental results. The evaluation metrics are retrieval quality and search time. These could be used …

Cpl: A Language For Real-Time Distributed Object Programming, Erhan Saridoğan, Nadi̇a Erdoğan

Turkish Journal of Electrical Engineering and Computer Sciences

As processing and time requirements of computer systems increase over the borders of single processor architectures, it is becoming more and more attractive to use distributed computing with additional real-time capabilities. In several cases, traditional programming languages have become insufficient to build distributed systems easily, especially when real-time issues and basic software quality factors are concerned. In this paper, a concurrent, object-oriented, distributed real-time programming language, CPL, with a supportive run-time system, namely the CORD-RTS, is introduced and new language features are described. The new language provides an efficient solution for command and control systems by embedding distribution and real-time …

An Efficient Middleware Architecture Supporting Real-Time Distributed Object Programming, Erhan Saridoğan, Nadi̇a Erdoğan

Turkish Journal of Electrical Engineering and Computer Sciences

With the increasing demand for distributed real-time systems, the need for programming tools and execution platforms useful in development of such application systems is widely recognized. This paper presents CORD-RTS, an efficient middleware architecture that provides support for real-time distributed object programming. The communication infrastructure and various components of the middleware, which support several modes of interactions among distributed real-time objects, along with its real-time features and services, are discussed in detail.

A New Congestion Control Mechanism Proposed For The Sscop Protocol, A. Hali̇m Zai̇m

Turkish Journal of Electrical Engineering and Computer Sciences

International Telecommunication Union, Telecommunications Sector (ITU-T) Recommendation Q.2110 states that the update of a granted credit window to the transmitter (VR(MR)) is implementation dependent. In this paper, a new algorithm is designed to control the traffic flow coming from malfunctioning users. The VR(MR) parameter is controlled for that purpose. The simulation results show that this new technique nearly doubles the system performance.

Walkthrough In Complex Environments At Interactive Rates Using Level-Of-Detail, Alper Selçuk, Uğur Güdükbay, Bülent Özgüç

Turkish Journal of Electrical Engineering and Computer Sciences

One of the biggest problems in computer graphics is displaying huge geometric models at interactive rates. A lot of work has been done to achieve the required frame-rates in architecture, simulation, computer-aided design and entertainment applications. In this paper, a system that enables walkthrough in complex environments using level-of-detail approximations is explained. The system uses hierarchical triangulated models as input. In the preprocessing phase, multiresolution models of objects are created using polygonal simplification techniques. During walkthrough, fast frustum culling based on bounding boxes is performed to eliminate branches of hierarchy that are not visible. An appropriate level for detail of …

A New Petri-Net-Based Synthesis Technique For Supervisory Control Of Discrete Event Systems, Murat Uzam, Anthony H. Jones

Turkish Journal of Electrical Engineering and Computer Sciences

A new Petri-net-based top-down synthesis technique for supervisory control of Discrete Event Systems (DES) is proposed to solve the forbidden state problem. The supervisors obtained are compiled supervisors, whose control policy is represented as a net structure, as opposed to mapping supervisors, whose control policy is computed as a feedback function of the marking of the system. The compiled supervisors obtained by using the technique proposed in this paper are both nonblocking and maximally permissive. The supervisors to be synthesised consist of a controlled Automation Petri Net model of the system. Automation Petri Nets (APN) include the following extensions to …

Approximations On The Aggregate Mpeg Video Traffic And Their Impact On Admission Control, Fati̇h Alagöz

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, we investigate the aggregate traffic approximations for the Motion Pictures Expert Group (MPEG) coded variable bit rate (VBR) video traffic and their impact on admission control at a desired Quality of Service (QoS) level. In order to generate the MPEG coded VBR video traffic, we use a novel source model that employs a mixture of two first-order autoregressive processes with lognormally distributed residuals (2LAR). The model parameters are found based on least square estimates to capture the marginal distribution and autocorrelation function as well as the single server queuing behavior of an MPEG coded empirical bitstream. We …

New Oscillator Topologies Using Inverting Second-Generation Current Conveyors, Ali̇ Toker, Hakan Kuntman, Oğüzhan Çi̇çekoğlu, Mehmet Di̇şçi̇gi̇l

Turkish Journal of Electrical Engineering and Computer Sciences

In this work, new oscillator topologies based on a recently introduced active element, namely inverting second-generation current conveyor, are presented. This recently introduced unity gain based active element is suitable for integrated circuit realization and can easily be implemented with CMOS technology. Considering this fact, basic oscillator topologies employing a single, two and three conveyors are proposed. Several oscillator circuits based on these topologies are obtained. Expressions for oscillation conditions and frequencies are derived both for ideal and non-ideal cases. Some of them are single frequency and the others are variable frequency oscillators. The oscillators employing two and three active …

Preface, Levent Sevgi̇

Turkish Journal of Electrical Engineering and Computer Sciences

No abstract provided.

Electromagnetic Engineering In The 21^{St} Century: Challenges And Perspectives, Leopold B. Felsen, Levent Sevgi̇

Turkish Journal of Electrical Engineering and Computer Sciences

This paper aims at a broad-brush look at certain technological and educational challenges that confront wave-oriented electromagnetic (EM) engineering in the 21^{st} century, in a complex computer and technology-driven world with rapidly shifting societal and technical priorities. Simulation strategies for complex EM systems, both analytic and numerical, are reviewed and categorized, and are illustrated on selected practical complex multicomponent system scenarios currently under investigation in Turkey. Educational issues to ensure proper multidisciplinary exposure of new generations of computer-weaned students, who will have to deal with these problems, are touched upon as well.

Time-Domain Simulation Of Thin Material Boundaries And Thin Panels Using Digital Filters In Tlm, J. Paul, V. Podlozny, Dave Thomas, C. Christopoulos

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, the design and implementation of digital filters for the time-domain simulation of electromagnetic wave interaction with thin material boundaries and thin panels using the Transmission-Line Modelling (TLM) method are described. The technique is applied to the description of thin ferrite layers placed on the external boundaries of the modelled space and to plastic panels placed inside the modelled space. The approach is validated using one-dimensional examples having analytic solutions. Finally, the results obtained for the Shielding Effectiveness (SE) of a practical equipment enclosure are presented to demonstrate the utility of the method in Electromagnetic Compatibility (EMC) prediction.

Aspects Of Radar Polarimetry, Ernst Luneburg

Turkish Journal of Electrical Engineering and Computer Sciences

This contribution is a tutorial introduction to the phenomenological theory of radar polarimetry for the coherent scatter case emphasizing monostatic backscattering and forward scattering (transmission). Characteristic similarities and differences between radar polarimetry and optical polarimetry and the role of linear and antilinear operators (time-reversal) are pointed out and typical polarimetric invariants are identified.

Two-Dimensional Photonic Crystal L-Shaped Bent Waveguide And Its Application To Wavelength Multi/Demultiplexer, Yoshihiro Naka, Hiroyoshi Ikuno

Turkish Journal of Electrical Engineering and Computer Sciences

The bent waveguide is a key element for integrated optical signal processing waveguide devices. We propose a new type of two-dimensional photonic crystal L-shaped bent waveguides with additional pillars at the corner. Using the FDTD method based on the principle of multidimensional wave digital filters we simulate its transmission characteristics and show an excellent transmission of light in L-shaped bent waveguide. As an application we design compact size multi/demultiplexer composed of the L-shaped bent waveguides and directional couplers and realize multi/demultiplexer with low-insertion loss and high extinction ratio device whose size is of the order of the wavelength of light.

Discrete Array Representation Of Continuous Space-Time Source Distributions, Amir Shlivinski, Ehud Heyman

Turkish Journal of Electrical Engineering and Computer Sciences

We consider the realization of a continuous space-time source distributions using a sparse non-uniform point-source array. The construction determines the largest possible cells corresponding to the local source parameters in order to obtain a sparse array, while meeting an error criterion on the pulsed radiation pattern. The scheme is applied for the realization of collimated short-pulse beam fields. The error criterion is imposed within the main beam direction, while outside this region the relative realization error can be large but it is negligible since the field there is small compared to the main beam field.

Development Of A Cylindrical Waveguide Antenna Array With A High Isolation Between Receive - Transmit Sub Arrays: Theory And Experiment, Vladimir I. Okhmatovsky, Konstantina S. Nikita, Stavros Koulouridis, Nikolaos K. Uzunoglu

Turkish Journal of Electrical Engineering and Computer Sciences

The possibility of developing an antenna system consisting of transmit and receive arrays and being able to work simultaneously in full duplex mode at the same frequency is a very attractive task. This could only be achieved if the isolation between the transmit and receive arrays is sufficiently high not to cause a parasitic oscillation which will ruin the proper operation of a transponder system to which the arrays will be connected. Specifically, in this paper the operation of two peripheral open waveguide arrays placed on a cylindrical surface and being isolated with a radial line operating as a space …

2d Complex Point Source Radiation Problem I. Complex Distances And Complex Angles, E. Gago-Ribas, M. J. Gonzalez Morales

Turkish Journal of Electrical Engineering and Computer Sciences

A methodology based on the complex spaces analysis, which allows to generalize the study of wave radiation and scattering problems is presented in this paper. From the analytic continuation of functions defined in the real domain (real propagation or scattering spaces) into the complex space (space of complex coordinates), general non homogeneous phase field solutions are obtained for a particular wave problem. From these general solutions, other common solutions obtained under different approximations will arise. This procedure allows to obtain a complete classification of the solutions for the wave problem under analysis, and also to study both the ranges of …

2d Complex Point Source Radiation Problem Ii.~Complex Beams, M. J. Gonzalez Morales, E. Gago-Ribas

Turkish Journal of Electrical Engineering and Computer Sciences

The complex point source analytic continuation, and the analysis into the spaces of complex distances, angles, and other related magnitudes, may be applied to describe a wide variety of 2D wave propagation problems. This step will be essential in order to establish a complete complex methodology which may be applied to obtain general descriptions of more practical problems involving the scattering of waves under some kind of field incidence. A particular application of the methodology presented in Part I will be used in Part II. The specific problem under analysis in these papers will be the general complex beam solution …

An Efficient Preconditioner For Iterative Solvers, V. V. S. Prakash, Raj Mittra

Turkish Journal of Electrical Engineering and Computer Sciences

The method of moments solution of the Maxwell's equations leads to a dense system of complex equations. Direct solution of these equations using LU factorization becomes unwieldy as the size of the scatterer increase in terms of wavelength. Iterative solvers, such as those based on Krylov projection methods, offer an alternative approach for solving large system of equations. Most often, the iterative methods are used in combination with some kind of preconditioning to improve the condition number of the system matrix A in order to acheive accelerated convergence [1-2]. This paper discusses the application of Multi-Frontal Preconditioners (MFPs) for the …

A Note On The Poisson Summation Formula And Its Application To Electromagnetic Problems Involving Cylindrical Coordinates, Anastassios H. Panaretos, Hristos T. Anastassiu, Dimitra I. Kaklamani

Turkish Journal of Electrical Engineering and Computer Sciences

A modified version of the Poisson Summation Formula is derived,involving the Fourier-Bessel Transform of the kernel function, as opposed to the conventional Fourier Transform engaged in the standard formula. This novel form can be applied to problems employing cylindrical coordinates, such as the fast evaluation of the dyadic Green's function in a waveguide or cavity of circular cross-section.

A Time Domain Uniform Geometrical Theory Of Slope Diffraction For A Curved Wedge, Prabhakar H. Pathak, Paul R. Rousseau

Turkish Journal of Electrical Engineering and Computer Sciences

A time domain version of the uniform geometrical theory of diffraction (TD-UTD) is developed to describe, in essentially closed form, the field which is produced via slope diffraction at a perfectly conducting, arbitrarily curved wedge excited by a time impulsive wave that exhibits a rapid spatial variation near the edge of the wedge. This TD-UTD slope diffracted field for a curved wedge is obtained by a Fourier inversion of the corresponding frequency domain UTD expression. An analytical signal representation of the transient fields is used since it is convenient, and because it circumvents some of the difficulties, which especially arise …

A Novel Mom Approach For Obtaining Accurate And Efficient Solutions In Optical Rib Waveguide, Namik Yener, Ercan Topuz

Turkish Journal of Electrical Engineering and Computer Sciences

The optical rib waveguide (ORW) plays an important role in the design of several integrated optical devices. Various methods have been proposed for obtaining the modal field solutions in ORW. However, to the best of our knowledge none of them is capable of providing accurate full-wave benchmark solutions. Here we present a novel MoM approach wherein the modes of a loaded rectangular waveguide are utilized as basis functions and demonstrate that this approach is very efficient and yields highly accurate full-wave results which can serve as benchmark solutions in assessing the quality of the data reported in the literature.

Plane Wave Diffraction By A Dielectric Loaded Open Parallel Thick Plate Waveguide, Bahatti̇n Türetken, Ali̇ Alkumru

Turkish Journal of Electrical Engineering and Computer Sciences

A uniform asymptotic high-frequency solution for a two-dimensional diffraction problem of plane electromagnetic waves by a dielectric loaded open parallel thick plate waveguide is investigated rigorously using the Fourier transform technique in conjunction with the mode matching method. This mixed method of formulation gives rise to scalar modified Wiener-Hopf equations of the second kind for which the solution contains a set of infinitely many constants satisfying an infinite system of linear algebraic equations. A numerical solution of this system is obtained for various values of plate thickness, incidence angle and permittivity, and the effect of these parameters on the diffraction …

Array Pattern Nulling By Phase And Position Perturbations With The Use Of A Modified Tabu Search Algorithm, Ali̇ Akdağli, Keri̇m Güney

Turkish Journal of Electrical Engineering and Computer Sciences

A useful and flexible method based on the tabu search algorithm for the pattern synthesis of linear antenna arrays with the prescribed nulls is presented. Nulling of the pattern is achieved by controlling both the phase and the position of each array element. To show the versatility of the present method, some design specifications such as the maximum sidelobe level and the null depth level are considered by introducing a set of weighting factors in the cost function constructed for the tabu search algorithm. Several illustrative examples of a Chebyshev pattern with the imposed single, multiple and broad nulls are …

Scalar Wave Diffraction By Perfectly Soft Thin Circular Cylinder Of Finite Length; Analytical Regularization Method, Eylem Özkan, Fati̇h Di̇kmen, Yury Alexanderovich Tuchkin

Turkish Journal of Electrical Engineering and Computer Sciences

A new mathematically rigorous and numerically effective method for solving the boundary value problem of scalar wave diffraction by an infinitely thin circular cylindrical screen of finite length is proposed. The method is based on the combination of the Orthogonal Polynomials Approach, and on the ideas of the methods of analytical regularization. As a result of the suggested regularization procedure, the initial boundary value problem is equivalently reduced to the infinite system of the linear algebraic equations of the second kind, i.e. to an equation of the type (I + H)x = b in the space \ell _{2} of square …