Engineering Commons^™

Lightweight Objective Quality Of Voice Estimation Through Machine Learning, Daniel Riordan

Theses

Communication systems are undergoing constant and rapid innovation, both at the design stage and in the field. This in turn has led to an inereasing need for fast, efficient, portable and economic methods for the testing of these systems. For voice carrying communication systems the quality of the transmitted voice that the system produces is a large factor in the overall performance rating of the system. This measure is known as the ‘Quality of Voice’ (QoV) and can be evaluated either subjectively or objectively.

Speech quality is a complex subjective phenomenon that can be best quantified by subjective testing. A …

Analysis Of Information Remaining On Hand Held Devices Offered For Sale On The Second Hand, Andy Jones, Craig Valli, Iain Sutherland

Journal of Digital Forensics, Security and Law

The ownership and use of mobile phones, Personal Digital Assistants and other hand held devices is now ubiquitous both for home and business use. The majority of these devices have a high initial cost, a relatively short period before they become obsolescent and a relatively low second hand value. As a result of this, when the devices are replaced, there are indications that they tend to be discarded. As technology has continued to develop, it has led to an increasing diversity in the number and type of devices that are available, and the processing power and the storage capacity of …

Kentucky Water Resources Research Institute Annual Technical Report Fy 2007, Kentucky Water Resources Research Institute, University Of Kentucky

KWRRI Annual Technical Reports (USGS’s 104b Grant Program)

The 2007 Annual Technical Report for Kentucky consolidates reporting requirements of the Section 104(b) base grant award into a single document that includes: 1) a synopsis of each student research enhancement project conducted during the period, 2) citations for related publications, reports, and presentations, 3) a description of information transfer activities, 4) a summary of student support during the reporting period, and 5) notable awards and achievements during the year.

How Do You Interpret A Confidence Interval?, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

A confidence interval (CI) is an interval estimate of a population parameter. Instead of estimating the parameter by a single value, a point estimate, an interval likely to cover the parameter is developed. Many student incorrectly interpret the meaning of a confidence interval. This paper offers a quick overview of how to correctly interpret a confidence interval.

A Framework For Efficient Data Distribution In Peer-To-Peer Networks., Darshan Purandare

Electronic Theses and Dissertations

Peer to Peer (P2P) models are based on user altruism, wherein a user shares its content with other users in the pool and it also has an interest in the content of the other nodes. Most P2P systems in their current form are not fair in terms of the content served by a peer and the service obtained from swarm. Most systems suffer from free rider's problem where many high uplink capacity peers contribute much more than they should while many others get a free ride for downloading the content. This leaves high capacity nodes with very little or no …

Real-Time Realistic Rendering Of Nature Scenes With Dynamic Lighting, Kevin Boulanger

Electronic Theses and Dissertations

Rendering of natural scenes has interested the scientific community for a long time due to its numerous applications. The targeted goal is to create images that are similar to what a viewer can see in real life with his/her eyes. The main obstacle is complexity: nature scenes from real life contain a huge number of small details that are hard to model, take a lot of time to render and require a huge amount of memory unavailable in current computers. This complexity mainly comes from geometry and lighting. The goal of our research is to overcome this complexity and to …

Taming Crowded Visual Scenes, Saad Ali

Electronic Theses and Dissertations

Computer vision algorithms have played a pivotal role in commercial video surveillance systems for a number of years. However, a common weakness among these systems is their inability to handle crowded scenes. In this thesis, we have developed algorithms that overcome some of the challenges encountered in videos of crowded environments such as sporting events, religious festivals, parades, concerts, train stations, airports, and malls. We adopt a top-down approach by first performing a global-level analysis that locates dynamically distinct crowd regions within the video. This knowledge is then employed in the detection of abnormal behaviors and tracking of individual targets …

Stable Optical Frequency Comb Generation And Applications In Arbitrary Waveform Generation, Signal Processing And Optical Data M, Sarper Ozharar

Electronic Theses and Dissertations

This thesis focuses on the generation and applications of stable optical frequency combs. Optical frequency combs are defined as equally spaced optical frequencies with a fixed phase relation among themselves. The conventional source of optical frequency combs is the optical spectrum of the modelocked lasers. In this work, we investigated alternative methods for optical comb generation, such as dual sine wave phase modulation, which is more practical and cost effective compared to modelocked lasers stabilized to a reference. Incorporating these comblines, we have generated tunable RF tones using the serrodyne technique. The tuning range was ±1 MHz, limited by the …

Digital Signal Processing Techniques For Coherent Optical Communication, Gilad Goldfarb

Electronic Theses and Dissertations

Coherent detection with subsequent digital signal processing (DSP) is developed, analyzed theoretically and numerically and experimentally demonstrated in various fiber-optic transmission scenarios. The use of DSP in conjunction with coherent detection unleashes the benefits of coherent detection which rely on the preservation of full information of the incoming field. These benefits include high receiver sensitivity, the ability to achieve high spectral-efficiency and the use of advanced modulation formats. With the immense advancements in DSP speeds, many of the problems hindering the use of coherent detection in optical transmission systems have been eliminated. Most notably, DSP alleviates the need for hardware …

Meshfree Approximation Methods For Free-Form Optical Surfaces With Applications To Head-Worn Displays, Ozan Cakmakci

Electronic Theses and Dissertations

Compact and lightweight optical designs achieving acceptable image quality, field of view, eye clearance, eyebox size, operating across the visible spectrum, are the key to the success of next generation head-worn displays. The first part of this thesis reports on the design, fabrication, and analysis of off-axis magnifier designs. The first design is catadioptric and consists of two elements. The lens utilizes a diffractive optical element and the mirror has a free-form surface described with an x-y polynomial. A comparison of color correction between doublets and single layer diffractive optical elements in an eyepiece as a function of eye clearance …

Management Framework For Hybrid Wireless Networks, Chong Shen

Theses

The objective of the Hybrid Wireless Network with dedicated Relay Nodes (HWN*) architecture is to interface the Base Station (BS) Oriented Mobile Network (BSON) and the 802.fix based Mobile Ad hoc Wireless Network (MANET) so that one system can be utilised as an alternative radio access network for data transmissions, while the incorporation of Relay Nodes (RN) is to extend the communication coverage, optimise medium resource sharing, increase spatial reuse opportunity, stabilise MANET link and create more micro-cells. The HWN* keeps the existing cellular infrastructure and a Mobile Terminal (MT) can borrow radio resources from other cells via secure multi-hop …

Polyaniline Nanofiber-Based Gas Sensors, Zhe-Fei Li, Frank D. Blum, Massimo F. Bertino, Chang-Soo Kim

Chemistry Faculty Research & Creative Works

There has been recent interest in conducting polymers that have very promising chemical and electrical applications. Some of these polymers have shown great potential for use in sensors.1 Polyaniline is one particular example of a prospective material. In our laboratory, we have studied the synthesis of polyaniline nanofibers. We have carried out one-pot syntheses to obtain polyaniline nanofibers in aqueous solutions where the polymerization was influenced by γ-radiation2 or UV-radiation.3 This polymer can also be patterned with an appropriate photo mask. In our present report, polyaniline nanofiber thin film sensors have been fabricated in one step by employing UV-irradiation and …

Spatio-Spectral Sampling And Color Filter Array Design, Keigo Hirakawa, Patrick J. Wolfe

Electrical and Computer Engineering Faculty Publications

Owing to the growing ubiquity of digital image acquisition and display, several factors must be considered when developing systems to meet future color image processing needs, including improved quality, increased throughput, and greater cost-effectiveness. In consumer still-camera and video applications, color images are typically obtained via a spatial subsampling procedure implemented as a color filter array (CFA), a physical construction whereby only a single component of the color space is measured at each pixel location. Substantial work in both industry and academia has been dedicated to post-processing this acquired raw image data as part of the so-called image processing pipeline, …

The Journal Of Undergraduate Research: Volume 06

The Journal of Undergraduate Research

This is the complete issue of the South Dakota State University Journal of Undergraduate Research, Volume 6.

A New Method Of Synthesizing Black Birnessite Nanoparticles: From Brown To Black Birnessite With Nanostructures, Shizhi Qian, Marcos A. Cheney, Pradip K. Bhowmik, Sang W. Joo, Wensheng Hou, Joseph M. Okoh

Mechanical Engineering Faculty Research

A new method for preparing black birnessite nanoparticles is introduced. The initial synthesis process resembles the classical McKenzie method of preparing brown birnessite except for slower cooling and closing the system from the ambient air. Subsequent process, including wet-aging at 7◦C for 48 hours, overnight freezing, and lyophilization, is shown to convert the brown birnessite into black birnessite with complex nanomorphology with folded sheets and spirals. Characterization of the product is performed by X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), thermogravimetric analysis (TGA), and N2 adsorption (BET) techniques. Wet-aging and lyophilization times are shown to …

Decoupling And Disturbance Rejection Control For Target Circulation, Jian Ma, Joon S. Lee, Woosoon Yim

Reactor Campaign (TRP)

The Target Complex loop TC-1 was originally conceived as part of an accelerator-driven system (ADS) pilot plant that was designed and developed by the Institute of Physics and Power Engineering (IPPE) and Experimental and Development Organization (EDO) “Gidropress” in Obninsk, Russia, under the International Science and Technology Center Project #559 in 1998. It was to be used as the target in a 1 MWth ADS experiment run off of the LANSCE proton accelerator at Los Alamos National Laboratory (LANL). When the U.S. transmutation program changed priorities from accelerator-driven systems towards nuclear fission reactors, the TC-1 loop was brought to UNLV …

Modeling And Design Algorithms For Electromagnetic Pumps, Daniel P. Cook, Yitung Chen, Jian Ma

Reactor Campaign (TRP)

Electromagnetic (EM) induction pumps are used extensively in current and proposed nuclear power systems and industrial molten metal transfer operations. Although the Magnetohydrodynamic (MHD) theory that underlies the operation of these types of pumps has been studied extensively in the past few decades, the design of specific EM pumping systems for specific flow cases requires computational tools and expertise, which is lacking in the U.S. However, for the past two years, researchers at UNLV have been utilizing the TC-1 liquid metal loop system at UNLV and an Annular Linear Induction Pump (ALIP) to drive the liquid metal and to develop …

Thermal Transient Flow Rate Sensor For High Temperature Liquid Metal Cooled Nuclear Reactor, Yingtao Jiang, Jian Ma

Reactor Campaign (TRP)

In nuclear power plants and accelerator driven systems (ADS) for nuclear waste treatment, it is important to monitor the coolant flow rate in the reactor core and pipe-line. In such a strong irradiation, high pressure, and temperature environment, the existing flow measurement techniques (such as Electromagnetic flow meters, Ultrasonic flow meters, Turbine flow meters, etc.) are not accurate and reliable.

The measurement of flow rates (mass flow rates or volume flow rate) plays a notable role in monitoring and controlling the experimental conditions. The bulk flow rates can be obtained through direct methods, which measure the amount of discharged fluids …

Knowledge-Based Information Resource Management System For Materials Of Sodium-Cooled Fast Reactor, Sean Hsieh

Reactor Campaign (TRP)

In the development of advanced fast reactors, materials and coolant/ material interactions pose a critical barrier for higher temperature and longer core life designs. For sodium-cooled fast reactors (SFRs) such as the Experimental Breeder Reactors in Idaho and the Fast Flux Test Facility in Hanford, experience has shown that qualified structural materials and fuel cladding severely limits their economic performance.

Liquid sodium has been selected as the primary coolant candidate for the Advanced Burner Reactor (ABR) of the Global Nuclear Partnership (GNEP). Materials improvement has been identified as a major thrust to improve fast reactor economics. Researchers from universities, national …

Monaco/Mavric Evaluation For Facility Shielding And Dose Rate Analysis, Charlotta Sanders, Denis Beller

Reactor Campaign (TRP)

The dimensions and the large amount of shielding required for Global Nuclear Energy Partnership (GNEP) facilities, advanced radiation shielding, and dose computation techniques are beyond today’s capabilities and will certainly be required. With the Generation IV Nuclear Energy System Initiative, it will become increasingly important to be able to accurately model advanced Boiling Water Reactor and Pressurized Water Reactor facilities, and to calculate dose rates at all locations within a containment (e.g., resulting from radiations from the reactor as well as the from the primary coolant loop) and adjoining structures (e.g., from the spent fuel pool).

The MAVRIC sequence is …

University Of Nevada, Las Vegas Transmutation Research Program Annual Progress Report Academic Year 2007-2008, Anthony Hechanova, Rebecca Paulson

Transmutation Research Program Reports (TRP)

It is my pleasure to present the UNLV Transmutation Research Program’s seventh annual report that highlights the academic year 2007-2008. Supporting this document are the many technical reports and theses that have been generated over the past seven years.

In the seventh year of our program, we continued to see growth in the Radiochemistry Ph.D. program with a total of 20 students in the fourth year of the program (we anticipated twelve in the program proposal). Since our inception, the program has sponsored to their conclusion 48 M.S. and 6 Ph.D. degrees. The program supported 53 graduate students, 11 undergraduates, …

Combined Radiation Detection Methods For Assay Of Higher Actinides In Separation Processes, Denis Beller, Charlotta Sanders, Warnick Kernan

Safeguards Campaign (TRP)

In the MPAC project, faculty and students are investigating the potential to use combined neutron and gamma-ray detector systems to measure quantities and isotopic constituents contained during separations and intermediate storage. This will require knowledge of the nuclear and decay characteristics of materials during processing, the development of conceptual designs of monitoring systems, radiation transport studies to develop an understanding of operational regimes, and experiments to confirm performance. In addition, both passive and active concepts will be investigated, including collaborations with the Idaho Accelerator Center at Idaho State University (ISU) to use electron linear accelerators for producing photoneutrons in situ, …

Fundamental And Applied Experimental Investigations Of Corrosion Of Steel By Lbe Under Controlled Conditions: Kinetics, Chemistry Morphology, And Surface Preparation, John Farley, Allen L. Johnson

Transmutation Sciences Materials (TRP)

Advanced nuclear processes and facilities (e.g., transmutation of nuclear waste, fast reactors, and spallation neutron sources) impose special demands on materials, which must withstand high temperatures, high radiation fields, and chemical corrosion. Proposed schemes for transmuting nuclear waste require a nonmoderating coolant such as lead-bismuth eutectic (LBE) or liquid sodium. While LBE corrodes most steels, small amounts of oxygen in the LBE greatly reduces the corrosion rate, and could ideally re-grow a damaged oxide layer in situ. The protective oxide layer would thus be self-healing. However, a fundamental understanding of the role of oxygen and passivating oxide layers is presently …

Effect Of Silicon Content On The Corrosion Resistance And Radiation-Induced Embrittlement Of Materials For Advanced Heavy Liquid Metal Nuclear Systems, Ajit K. Roy

Transmutation Sciences Materials (TRP)

The beneficial effects of Si on both the metallurgical and corrosion properties of Cr-Mo steels have previously been demonstrated at UNLV. Therefore, additions of Si ranging from 0.5-2.0 weight percent (wt%) was attempted in this investigation to explore Si effect on both the high temperature tensile properties and corrosion behavior of T91 grade steel. Corrosion studies in the presence of molten LBE could not be performed due to a lack of proper experimental facilities at UNLV. Therefore, detailed corrosion studies involving Si-containing T91 grade steels were performed in an aggressive aqueous solution of acidic pH. Further, significant efforts have been …

Theoretical Modeling Of Protective Oxide Layer Growth In Non-Isothermal Lead Alloy Coolant Systems, Yitung Chen, Taide Tan, Jinsuo Zhang, Jichun Li

Transmutation Sciences Materials (TRP)

In advanced nuclear energy systems, lead alloys emerge as strong candidates for transmutation and advanced reactor systems as nuclear coolants and spallation neutron targets. However, it is widely recognized that corrosion of materials caused by lead alloys presents a critical barrier to their industrial use. A few experimental research and development projects have been set up by different groups such as at Los Alamos National Laboratory to study the corrosion phenomena in their test facilities and to develop mitigation techniques and materials. One of the central or main techniques under development is to use active control of oxygen thermodynamic activity …

Development Of Nanostructure Based Corrosion-Barrier Coatings On Steel For Transmutation Applications, Biswajit Das

Transmutation Sciences Materials (TRP)

Advanced transmutation systems require structural materials that are able to withstand high neutron fluxes, high thermal cycling, and high resistance to chemical corrosion. The current candidate materials for such structures are ferritic and ferritic-martensitic steels due to their strong resistance to swelling, good microstructural stability under irradiation, and the retention of adequate ductility at typical reactor operating temperatures.

In parallel, lead-bismuth eutectic (LBE) has emerged as a potential spallation target material for efficient production of neutrons, as well as a coolant in the accelerator system. While LBE has excellent properties as a nuclear coolant, it is also highly corrosive to …

Reactor Physics Studies For The Afci Reactor-Accelerator Coupling Experiments Project, Denis Beller

Transmutation Sciences Physics (TRP)

The specific research objective of this three-year project was to design and conduct accelerator driven experiments, to help demonstrate the ability to design, compute, and conduct ADS experiments and to predict and measure source importance, coupling efficiency, sub-critical reactor kinetics and source-driven transients. In addition, databases were created for both steady state and transient ADS experiments for the nuclear community to develop and test new computational codes and methods. The importance of a driving neutron source in various regions of different subcritical assemblies was mapped. Experiments were conducted and compared to calculations with radiation transport and thermal hydraulics codes such …

Separation Of Technetium From Uranium And Waste Form Synthesis, Kenneth Czerwinski

Waste Forms Campaign (TRP)

In this project, systematic investigations on the Tc-Zr binary metal system will be evaluated for the first time. The synthesis of metallic Tc as well as its alloys with Zr will be evaluated. In order to provide valuable data to AFC R&D, the thermodynamic equilibrium phases, as well as their performance under repository conditions, will be examined.

The research objectives of this project are as follows:

• Evaluate anion exchange methods for achieving the separation of Tc from U.

• Synthesize metallic Tc from the separated product.

• Synthesize and characterize Tc alloys.

• Investigate Tc-corrosion and Tc-leaching of binary …

Evaluation Of Cs/Sr Waste Form For Long Term Storage And Disposal, Gary Cerefice, Longzhou Ma

Waste Forms Campaign (TRP)

To facilitate long-term storage, the disposal containers will need to be able to survive for the entire storage interval. The first aspect of the project will explore the potential interaction of the aluminosilicate waste form with the storage canister materials to determine if there is any corrosion or chemical interaction concerns for the storage of the materials. At the end of the storage interval, most of the cesium (¹³⁷Cs) in the waste form will have decayed to its daughter, barium (¹³⁷Ba). While this decay provides a significant reduction in the decay heat generated by the waste …

Interaction Between Metal Fission Products And Triso Coating Materials, Clemens Heske

Fuels Campaign (TRP)

This project focuses on the chemical bonding and interface formation of metal fission products with the coating materials used in tri-isotropic (TRISO) fuel particles for gas-cooled reactors. By combining surface- and bulk-sensitive spectroscopic and microscopic methods, intermediate chemical phases at the interface, intermixing/diffusion behavior, and the electronic interface structure for different coating materials and metals are examined.

In detail, the project studies the interface formation of Pd, Cs, and Ag with SiC and pyrolytic carbon. Using SiC single crystals and highly-ordered pyrolytic carbon (HOPG) as substrates, interfaces are prepared under controlled conditions in an ultra-high vacuum environment and are studied …