Engineering Commons^™

Applications Of Spectroscopic Ellipsometry In Corrosion Investigation, Ling-Jie Li, Yu-Ling He, Jing-Lei Lei, Sheng Tao Zhang

Journal of Electrochemistry

As a highly-sensitive and non-destructive in situ technique, spectroscopic ellipsometry has been widely applied in corrosion investigation to acquire the dynamic information of the “electrode-medium” interface during corrosion. This paper lays out some representative demonstrations in several established optical models used to interpret data obtained with spectroscopic ellipsometry in corrosion investigation. In addition, the latest trends in development of this technique are analyzed.

Multifunctional Corrosion Inhibition Behavior Of Zn-Al Calcined Layered Double Hydroxides For Steel Rebar In Nacl Solution, Xiao-Juan Zhang, Jing-Jing Wang, Shi-Gang Dong, Chang-Jian Lin

Journal of Electrochemistry

The Zn-Al layered double hydroxides (Zn-Al LDHs) and calcined products (Zn-Al CLDHs) were synthesized successfully under a routine air atmosphere. The results showed that both Zn-Al LDHs and Zn-Al CLDHs had obvious flake structures. The corrosion inhibition of Zn-Al CLDHs for steel rebar in NaCl solution was studied by electrochemical techniques. It was found that the corrosion rate of steel rebar decreased significantly after the steel rebar was treated by Zn-Al CLDHs in NaCl solution for 3 h. It was indicated that Zn-Al CLDHs could absorb Cl^- and release OH^- during their reconstruction process, which provided dual protection …

System For Detection Of Defects In Cables Of Bridge Structures, Emad Ismail Abdel Salam

Theses and Dissertations

Over the last 75 years, many cable-supported bridges have been built in America, Europe, Asia and other parts of the world. However, over the years these bridges have aged and been exposed to environmental conditions such as rain, snow, de-icing and harmful chemicals. These conditions cause various levels of deterioration in bridges, particularly corrosion. Corrosion causes a loss of cross-section in the steel, adversely affecting the bridge's capacity to carry its service loads, and can possibly cause bridge failures. Although many methods have been attempted to inspect these bridges, most have offered limited success. In the recent years, it has …

Investigation Of The Telluric Effects Arising Along The Cathodically Protected Natural Gas Pipeline Between Karadeniz Ereğli And Düzce, Bi̇lal Demi̇rel, Hayri̇ Yalçin

Turkish Journal of Electrical Engineering and Computer Sciences

Cathodic protection is one of the most widely used applications for protecting underground and submarine metallic structures from corrosion. This method is based on providing the electrons, which metallic structures lose as a result of electrolytic reaction, by the cathodic protection system. However, from time to time, it may be possible that there is some unwanted interference input into the metallic structure in such applications. This study is aimed at ascertaining the existence, arising frequency, and magnitude of an interference called the telluric effect that is going in and out of the natural gas pipeline between Düzce and Karadeniz Ereğli …

In Vitro Studying Corrosion Behaviour Of Biocorrodible Mg Alloys, Sina S. Jamali, Simon Moulton, Maria Forsyth, Gordon G. Wallace

Australian Institute for Innovative Materials - Papers

The idea of bioabsorbable/biocorrodible stents has gained increasing attention in the last decade. Permanent coronary stents, traditionally made from 316L grade stainless steel, are routinely used for the treatment of blocked arteries. However, these stents can cause complications such as restenosis, thrombosis and the need for the patient to undergo prolonged antiplatelet therapy. Biodegradable metal stents provide an opportunity for the stent to remain in place for a period to ensure restoration of function and then degrade through a carefully controlled bio-corrosion process. Among the number of potentially suitable materials, Magnesium alloys have shown great promise as a stent material …

Encapsulation Of High Temperature Phase Change Materials For Thermal Energy Storage, Rupa Nath

USF Tampa Graduate Theses and Dissertations

Thermal energy storage is a major contributor to bridge the gap between energy demand (consumption) and energy production (supply) by concentrating solar power. The utilization of high latent heat storage capability of phase change materials is one of the keys to an efficient way to store thermal energy. However, some of the limitations of the existing technology are the high volumetric expansion and low thermal conductivity of phase change materials (PCMs), low energy density, low operation temperatures and high cost. The present work deals with encapsulated PCM system, which operates at temperatures above 500°C and takes advantage of the heat …

Nondestructive Electrothermal Detection Of Corrosion, Brittany Ambeau, Harris Enniss, Stefan Schnake

Mathematical Sciences Technical Reports (MSTR)

Nondestructive testing and imaging plays an important role in many industries, e.g., the monitoring and maintenance of corrosion in aircraft. The general technique is to input energy in some form into an object, observe the object’s response, and from this input-output information determine the internal structure. New techniques are always being explored, and recently there has been much interest in methods that use multiple forms of energy. In this vein, we examine a new technique for imaging corrosion or material loss in an object by combining electrical and thermal measurements on some accessible portion of the object’s outer boundary. The …

Corrosion Characteristics Of Galvanized Flat Steel For Power Grounding In Nacl Solution Medium, Yong Li, Gao-Lin Wu, Bang-Fei Deng, Ping Yang, Xue-Ming Li, Qing-Bin Zong

Journal of Electrochemistry

The corrosion behavior of power grounding galvanized flat steel was studied by polarization measurement, electrochemical impedance spectroscopy and neutral salt spray test in 5% NaCl solutions. The surface morphologies of galvanized coating and structural properties of corrosion products were observed with scanning electron microscope and X-ray diffraction spectrometer, respectively. Results showed that under the temperatures of 20~60℃, the corrosion currents of galvanized flat steel increased with the temperature rising. The corrosion rate at 60℃ was 0.8408 mA?cm-2, which is 2.9 times larger than that at 20℃. The corrosion rate dropped after reaching the maximal value of 1.95 mg?cm-2?d-1 when the …

Corrosion Electrochemical Behavior Of Am60 Magnesium Alloys In Automobile Engine Coolants, Ling-Jie Li, Sha Wang, Yin Xiao, Jun Lan, Jing-Lei Lei, Sheng-Tao Zhang, Fu-Sheng Pan

Journal of Electrochemistry

The polarization measurements and electrochemical impedance spectroscopy(EIS) were used to study the corrosion electrochemical behavior of AM60 magnesium alloys in three kinds of commercial coolants for automobile engine.Results show that the tested commercial coolants are slightly corrosive to AM60 magnesium alloys and their corrosivity varies from coolant to coolant.The coolant C is the least corrosive among the studied commercial coolants and the coolant A is more corrosive than the coolant B and C.The coolant C appears to be the most promising coolant for automobile engine made by magnesium alloys.The coolant resistivity plays an important role in the corrosion of AM60 …

Effect Of Cldh On Rebar Corrosion Behavior In Chloride Contaminated Neutral Pore Solutions, Yu-Ming Tang, Le Niu, Yu Zuo

Journal of Electrochemistry

The effect of calcined LDH-MgAl-CO3 on rebar corrosion behavior in chloride ion contaminated neutral concrete pore solutions was investigated in this paper.Corrosion potentials of rebars in pore solutions after treatment with CLDH were higher than before treatment.According to polarization tests,passivated region of rebars in pore solutions after treatment with CLDH was found apparently instead of activation.EIS tests showed that CLDH made the impedance of specimens increase.The measurements of pH and chloride ion concentration after treatment indicated that / of pore solutions decreased by 4～5 magnitude orders.

Studied Corrosion Behaviors Of Reinforcing Steel In Concrete By A Single-Dimensional Array Electrode, Lan-Qiang Li, Shi-Gang Dong, Rong-Gui Du, Chang-Jian Lin

Journal of Electrochemistry

A single-dimensional array electrode was developed as a new electrochemical technique to image corrosion potential,galvanic current and polarization curves of reinforcing steel in concrete during corrosion process.Combining with the polarization behavior for each micro-electrode,the interactions between corrosion macrocell and corrosion microcell of the steel in concrete were evaluated.It was noticed that the corrosion macrocell and microcell occurred independently in difference regions at the initial stage of corrosion.The corrosion macrocell current can be in situ followed by corrosion potential imaging.The corrosion propagation of steel in concrete is closely related to the interactions between corrosion macrocell and corrosion microcell.

Electrical Impedance Imaging Of Corrosion On A Partially Accessible 2-Dimensional Region, Court Hoang, Katherine Osenbach

Mathematical Sciences Technical Reports (MSTR)

In this paper we examine the inverse problem of determining the amount of corrosion on an inaccessible surface of a two-dimensional region. Using numerical methods, we develop an algorithm for approximating corrosion profile using measurements of electrical potential along the accessible portion of the region. We also evaluate the effect of error on the problem, address the issue of ill-posedness, and develop a method of regularization to correct for this error. An examination of solution uniqueness is also presented.

Synergism Of Complex Additives Of Dtab+Ktl For Zinc Corrosion Inhibition In Koh Solutions, Sheng-Zhou Lin, Zeng-Xin Cai, Gui-Sheng Wang, He-Bing Zhou, Wei-Shan Li

Journal of Electrochemistry

The electrochemical behaviors of Zn in 3mol/L KOH solution containing several kinds of inhibitors were investigated by weight-loss,electrochemical methods and SEM. The results showed that both the single ad-ditive and the mixed additives can suppress the corrosion of zinc in 3 mol/LKOH solution. And the inhibition ef-feciency of the mixed additives is higher than that of any single additive because of the synergistic effect between KTL and DTAB. The adsorption of DTAB on the surface of zinc has been enhanced in the presence of KTL.

Developments Of Scanning Electrochemical Probes And Their Applications In Studying Of Localized Corrosions, Chang-Jian Lin, Yan Li, Bin Lin, Rong-Gang Hu, Min Zhang, Xiang-Dong Zhuo, Rong-Gui Du

Journal of Electrochemistry

The electrochemical inhomogeneities always exist at the interface of metal/solution,and play an important and often controlling role in localized corrosion of metals in a given environment.It is necessary to develop in situ imaging techniques for further studying the electrochemical and environmental inhomogeneities at the interface of metal/solution for the localized corrosion system.In this paper,various techniques with spatial resolution,such as scanning micro reference electrode(SMET),scanning electrochemical microscope(SECM),atomic force microscope(AFM),and scanning Kelvin probe(SKP),and their applications in corrosion studies were briefly reviewed.The chemical probes and array electrode have been developed.It was concentrated to describe our newly developed techniques of the scanning electrochemical probes,including SMET …

Electrodeposition Of Al On Magnesium Alloy In Ionic Liquid, Tsai Wen-Ta, Shu-You Chen, Mu-Huan Zhuang, Chang Jeng-Kuei, Yi-Wen Sun

Journal of Electrochemistry

Electrodeposition of a metallic aluminum on a magnesium alloy in acidic aluminum chloride-1-ethyl-3-methylimidazolium chloride ionic liquids(AlCl3-EMIC) was investigated.The effects of current density and AlCl3 content in the ionic liquid on the electrodeposition behavior were studied.The results showed that aluminum could be successfully electrodeposited on the AZ91D substrate.At-0.2 V,the ionic liquid containing 60 m/o AlCl3 was optimum for Al electrodeposition.The current efficiency was higher if electrodeposition was performed at a lower applied current density.The existence of Al coating could caused a substantial increase in open circuit potential,reducing the susceptibility of Mg alloy to corrosion.The results of electrochemical impedance spectroscopy showed that …

Influence Of Magnesium Nitrate On The Corrosion Performance Of Sol-Gel Coated Aa2024-T3 Aluminium Alloy, Rajath Varma, Brendan Duffy, John Cassidy

Articles

Traditional anti-corrosion technology has relied heavily on using reducible metal species, predominantly hexavalent chromium (Cr(VI)), for protecting reactive metal alloys such as aluminium which is extensively used in the aerospace sector. However, the impending changes in the use of Cr(VI) in Europe and the United States have forced aerospace manufacturers to examine alternative materials for protecting aluminium. One of the most promising alternatives being investigated are organosilane based sol-gels containing anticorrosion additives. In this work the anti-corrosion properties of magnesium (II) nitrate (Mg(NO3)2) as a inhibitor was investigated at different concentrations (0.1% - 1.0 wt %) in a methyltriethoxysilane (MTEOS) …

Study Of Corrosion Of Materials In The Sulfur-Iodine Hydrogen Production Cycle, Thao Trung Ho

UNLV Theses, Dissertations, Professional Papers, and Capstones

Hydrogen is of great interest since the availability of traditional fossil fuels is in decline. Strictly speaking, hydrogen is not a primary source of energy but is an energy carrier, since energy typically must be used from another source (electricity, natural gas, coal, etc.) to produce it. Of hydrogen production techniques, the Sulfur-Iodine thermochemical water splitting process (S-I cycle), which was proposed by General Atomics (GA), is promising with its simplicity and high efficiency. Most of the chemicals are recycled except water. However, the S-I cycle operates in a harsh, corrosive environment in the presence of a mixture of iodine …

Corrosion Inhibition Of Magnesium Alloy In 3.5% Nacl Medium By Tungstate, Ling-Jie Li, Zhi-Ming Yao, Jing-Lei Lei, Dong-Hai He, Sheng-Tao Zhang, Fu-Sheng Pan

Journal of Electrochemistry

Electrochemical impedance spectroscopy(EIS),Tafel polarization curves and scanning electron microscopy(SEM) were used to study the corrosion inhibition of AZ61 magnesium alloy in 3.5% NaCl medium with tungstate.Results showed that tungstate demonstrates strong inhibition to the corrosion of AZ61 magnesium alloy.At the concentration of 0.01 mol/L,tungstate has a high inhibition efficiency 75.5%.Tungstate is an anodic inhibitor that mainly inhibited the anodic reactions of magnesium alloy through forming a compact protective layer that covered the magnesium alloy surface active sites.

Localised Galvanic Corrosion Processes In Thermal Spray Coated/Cast Aluminium Alloy Systems, David Culliton, Tony Betts, David Kennedy

Conference Papers

Cast Aluminium Alloys, because of the propensity of aluminium to react with impurities and alloying elements, are prone to developing IM impurities during the solidification process. These IM phases can act, in some fluids, as initiation sites for localised corrosion processes, resulting in degradation phenomena, such as pitting. Whilst Thermal Spray coatings can improve the wear resistance of Cast Aluminium Alloys, their corrosion performance may be hampered by the presence of through porosity within the coating.

The present work details some preliminary studies of the localised corrosion processes occurring at the interface area between a Thermal Spray coating and a …

Corrosion Electrochemical Behavior Of Az31 And Az61 Magnesium Alloys In Simulated Sea Water, Ling-Jie Li, Sheng-Hai Yu, Jing-Lei Lei, Chuan-Pu Liu, Sheng-Tao Zhang, Fu-Sheng Pan

Journal of Electrochemistry

Tafel polarization curves and electrochemical impedance spectroscopy(EIS) techniques were employed to investigate the corrosion electrochemical behavior of AZ31 and AZ61 magnesium alloys.Scanning electron microscopy(SEM) was used to observe the alloy microstructure and corrosion morphology.The variation of the bulk corrosive medium pH with immersion time was recorded during the exposure of the alloys to simulated sea water.Results show that AZ61 magnesium alloy exhibits much better anti-corrosion ability than AZ31 magnesium alloy.The different corrosion behavior between the two magnesium alloys is correlated with their different content of Al alloying element.The higher content of Al in AZ61 alloy leads to the homogenerous microstructure …

Study On Electrochemical Impedance Spectroscopy Of Carbon Steel Eroded In Methyldiethanolamine Solution, Dong-Ping Wei, Rong-Zong Hu, Dan-Mei Pan, Wei-Xiong Huang, Rui Dong

Journal of Electrochemistry

Corrosion behavior of carbon steel in methyldiethanolamine(MDEA) solution was investigated by Electrochemical Impedance Spectroscopy(EIS).The results were showed that the corrosion rate of carbon steel in solution containing dissolved oxygen is higher than that in solution removed of dissolved oxygen before cathodic activation.They were reversed after cathodic activation.The corrosion rate is increased at first and then decreased when the concentration of MDEA is increased in the blank solutions.In the simulated solutions containing quantities of!heat-stable salts(HSS),the corrosion rate is decreased monotonously with increase of the MDEA concentration.As anodic polarization potential is increased,the EIS of carbon steel in HSS simulated solution showed characteristics …

Corrosion Electrochemical Behavior Of Aluminum Flake Pigmented Water-Borne Epoxy Coating On Carbon Steel In Nacl Solution, Li-Li Xue, Li-Kun Xu, Qing-Fen Li, Hong-Qing Song, Wen-Juan Zhou, Guang-Zhang Chen

Journal of Electrochemistry

The corrosion electrochemical behavior of a water-borne epoxy coating pigmented with aluminum flake on carbon steel with artificial scratch defect was studied in 3.5% NaCl solution using electrochemical impedance spectroscopy(EIS)and scanning vibrating electrode technique(SVET).The results indicated that the defect presented anodic electroactivity at the initial stage of immersion,which extended gradually with time from the scratch into the neighboring coating,lowering the coating impedance.With further immersion,however,the electroactivity of the coating/steel interface decreased significantly due to the self-repairing of the corrosion products,causing an obvious increase of the coating impedance.In the later period of immersion,more scattered electroactive areas appeared under the coating because of …

Effect Of Cracks On Corrosion Of Rebar In Concrete Studied By Wire Beam Electrode, Guo-Xi Li

Journal of Electrochemistry

The effects of crack and ethanolamine on corrosion of rebar in concrete were studied by measuring the distribution of corrosion potential and polarization resistance of iron wires in 10% NaCl solution.The results showed that the diffusion of water,oxygen and chloric ion toward concrete was accelerated by the crack which intensified the nonuniform corrosion of iron wire with the regions near to crack as anode and the uncracked regions as cathode.Ethanolamine could diffuse into the body of concrete and absorb on the surface of iron wire,which reduced iron corrosion evidently and successfully inhibited the nonuniform corrosion caused by crack without changing …

A Study Of Three Corrosion Inhibitors For Reinforcing Steel In Sps Solution By Electrochemical Methods, Bing Zhao, Rong-Gui Du, Chang-Jian Lin

Journal of Electrochemistry

Some electrochemical techniques such as linear polarization,electrochemical noise and EIShave been employedto study the inhibition behavior of N-lauroyl sarcosinate,β-sodium glycerophosphate and D-sodium gluconate for the reinforcing steel immersed in simulated concrete pore solution(SPS) with NaCl addition.The results show that D-sodium gluconatehas an obvious inhibitive effect for the reinforcing steelin containingCl~(-)SPS solution.It has been proposed that the corrosion inhibition of D-sodium gluconate is due to its competitive adsorption and precipitation on steel surface in the simulated concrete environment.

Corrosion Behavior Of Sml,Erw Pipeline Steels Exposed To Seamud, Wei Hua

Journal of Electrochemistry

The corrosion behavior of API Spec X60 pipeline steels, including electric resistance welding(ERW) and Seamless (SML) types,in sea mud gathered fromYangtse River estuaryof the East China Sea was investigatedthrough linear polarization resistance, potentio-dynamic polarizationand electrochemical impedance measurements.The result indicate the improved corrosion resistance of SML in sea mud. The oxygen diffusion in the cathode zone determines the corrosion behavior of pipeline steel in sea mud.

Study Of Anti-Corrosion Property On Poly(An-Co-Oas)/Epoxy, Qing-Wu Wang, Geng-Chao Wang

Journal of Electrochemistry

polyaniline, polyanisidine and their copolymer poly(An-co-oAs) were synthesized via the solution chemical oxidative polymerization of aniline and anisidine in an acidic aqueous medium, and their properties and structure were characterized. The electrochemical method were applied to evaluate the corrosion behavior of tined iron uncoated or coated by polyaniline, poly(An-o-oAs), polyanisidine and poly(An-co-oAs)/epoxy blend in acid or saline aqueous solution. The result showed that with the increase of anisidine content, the solubility of polymers is improved apparently but their oxidation extent decreases accordingly. It is also founded that polyaniline, poly(An-co-oAs) and polyanisidine all have good anti-corrosion properties, and their anti-corrosion capacity …

Electrodeposition Nanolaminated Growth Of Zinc, Ying Cao, Tian-Hui Shen, Jing-Yuan Yao, Gui-Fu Ding

Journal of Electrochemistry

Nanolaminated growth of the electrodeposition of zinc was studied. The structure and size of crystalline in zinc coatings were investigated by using FEG-TEM and XRD. The corrosion tests of the zinc deposition and the Coatings-Neutral salt spray test were performed, the capability in corrosion resistance of the nanolaminated growth was better than that of others.

Effect Of Dissolved Oxygen On The Corrosion Behavior Of Coalesced Copper And Stainless Steel-206 In Acetic Solutions, Rong-Zong Hu, Xiong-Cao Zhao, Yu-Hua Weng, Chang-Jian Lin

Journal of Electrochemistry

Linear sweeping technique and dissolving oxygen sensor were used to study the effect of dissolved oxygen and relating factors on the corrosion behavior of coalesced copper and stainless steel-206 in acetic solutions. It was found: 1. The existing of dissolved oxygen is one of the important factors, which strongly influenced the corrosion behavior of coalesced copper and stainless steel-206 in acetic solution. 2. The existing of dissolved oxygen is benefitial to the preventing stainless steel-206 from corrosion in acetic solutions, but damage to the preventing coalesced copper from corrosion. 3. At the high temperature since the dissolved oxygen was escaping …

Electrochemical Techniques For Measuring Anti-Corrosion Behavior Of The Thin Corrosion Inhibitor Layer To The 907a Steel, Yong-Tao Zhao, Jian-Hua Wu, Fan-Cai Chen, Zhong-Ping Gao, Jia Wang, Chang-Jiu Zhao

Journal of Electrochemistry

The corrosion inhibiting behavior of 907A steel,which was covered with thin inhibitor layers in moist seawater atmosphere,was studied.The electrochemical measurements,including EIS method and the coulostatic method,were used to atmospheric corrosioed monitor(ACM)under thin inhibitor layers to determine its corrosion rate.The results shown that the application of electrochemical methods such as the coulostatic technique and EIS could readily detect the on going process of film formation. Hence, the rapid evaluation of the thin inhibitor layers for 907A steel might be possible.

Corrosive Electrochemical Behavior Of Carbon Steel In Microbiological Medium, Jing Liu, Hong-Bo Fan, Hai-Ping Xu, Jia-Shen Zheng, Li-Ming Xu, Zong-Qiang Mao

Journal of Electrochemistry

Sulfate_reducing bacteria(SRB)grows and propagates, PH of the solution is dropped from 7.5 to 5.8,and forms the biofilms on carbon steel in culture medium.The micro_environment on the surface of carbon steel is changed under the biofilms,the factors accelerate the formation of the pitting corrosion. When the biofilm on carbon steel is cleaned out,the surface of carbon steel have the non_uniform pitting corrosion. The activity of SRB and the porous structure of biofilms induced the initiation and development of the pitting corrosion of carbon steel.The process of microbiologically induced corrosion(MIC) involves the development of SRB activity,which promotes the permeation of gydrogen into …