Engineering Commons^™

A Proof-Of-Concept Study For An Elastohydrodynamic Seal Design, Cameron M. Stuart

Honors College Theses

Supercritical CO₂ (sCO₂) power cycles are superior to traditional water based, air-breathing, direct-fired, open Brayton cycles or indirect-fired, closed Rankine cycles in terms of efficiency and equipment size. They hold great potential in fossil fuel power plants, nuclear power production, solar power, geothermal power, and ship propulsion. To unlock the potential of sCO₂ power cycles, utilized technology must withstand 10–600 MWe and at sCO₂ temperatures and pressures of 350–700℃ and 20–35 MPa for nuclear industries. Amongst many challenges at the component level, the lack of suitable shaft seals for sCO₂ operating conditions needs to …

How Automation Is Making A Positive Impact On The Fast Food Industry, Noah Bullock

Graduate Dissertations and Theses

As the fast food industry has rapidly evolved, so has the use of technology within these businesses. Artificial intelligence is something that is being used in these fast-food restaurants to drive change. With restaurants adding artificial intelligence into their business model, many of their goals have changed. Restaurants are now having the goal of improving their speed and accuracy when it comes to order taking, enhancing the customer experience, and reducing their costs. All of which are attainable through the use of artificial intelligence. Though businesses are now using artificial intelligence; there are many concerns about the downsides that come …

Understanding The Effect Of Nanointerfaces On Nanostructure And Mechanical Properties Of Semicrystalline Polymers Using Coarse-Grained Molecular Dynamic Simulations, Nayoung Kim

Honors College Theses

Polymer crystallization is a classical problem of polymer research. Many synthetic and natural polymers take the semi-crystalline form. Crystallization of polymers is a complex process associated with the partial alignment of their molecular chains. The final physical properties of semicrystalline polymers are determined by the degree of crystallinity and the size and orientation of the crystallites (nano- to micro-sized crystalline regions). Although it has been studied for many years, we still lack a fundamental understanding of the types of factors that influence the semicrystalline structure and how the structure affects the final properties. It is difficult because crystalline polymers are …

A Deep-Learning Framework For Spray Pattern Segmentation And Estimation In Agricultural Spraying Systems, Praneel Acharya, Travis Burgers, Kim-Doang Nguyen

Mechanical Engineering Faculty Publications

This work focuses on leveraging deep learning for agricultural applications, especially for spray pattern segmentation and spray cone angle estimation. These two characteristics are important to understanding the sprayer system such as nozzles used in agriculture. The core of this work includes three deep-learning convolution-based models. These models are trained and their performances are compared. After the best model is selected based on its performance, it is used for spray region segmentation and spray cone angle estimation. The output from the selected model provides a binary image representing the spray region. This binary image is further processed using image processing …

Structure And Movement Design To Build A Functional Prosthetic Hand, John Campbell

Honors College Theses

This project aims to create a functional prosthetic hand that will improve upon the previous design for this project. The previous design included four fingers which were moved using a four-bar linkage and slider crank mechanism in combination with a linear actuator to move all four fingers in unison. Two servo motors were used to create an opposable thumb that could be used to grasp objects. Movement of the prosthetic hand was activated using a signal received from a myoelectric sensor. The goal of this project is to study this design and attempt to upgrade the prosthetic hand utilizing a …

Compounding And Melt Blending/Extrusion Of Polyether Ether Ketone (Peek) And Amorphous Magnesium Phosphate (Amp) For Fused Deposition Modelling (Fdm) Based 3d Printing, Vijay Kumar Bokam

ETD Archive

Polyether ether ketone (PEEK) is a high-performance polymer material for developing implants for orthopedic, spinal, cranial, maxillofacial, and dentistry applications. However, the major limitation of PEEK implants is their bio-inertness, i.e., their incapability to integrate with tissues. Therefore, prior efforts have always focused on developing Hydroxyapatite (HA) coatings on PEEK or PEEK-HA composites or sulfonation of PEEK surface or plasma treatment. As opposed, in this study, we engineered a highly novel bio-ceramic known as amorphous magnesium phosphate (AMP), which surpasses the bioactivity and biodegradation kinetics of HA. In this study, we employed High energy planetary ball milling, a mechanical alloying …

Evaporation And Condensation From Epiphytes During Saturated Conditions In A Maritime Live-Oak Forest (Georgia, Usa)., Akosh Raffai

ETD Archive

Most of the rain that falls over land, falls over forests, which cover approximately one-third of global land surface. Significant immediate and wide-ranging impacts are exerted on hydrological, ecological, and societal systems due to canopyrainfall interactions, altering rainwater supply to the surface. All storm-related hydrological processes are impacted by the relative rates that canopy surfaces retain, evaporate, and redistribute rain. Many forest canopies host a community of plants called epiphytes that are generally capable of storing and evaporating substantial water. Epiphytes are comparatively under-researched regarding their role in rainfall partitioning compared to bark and leaves. Skidaway Island in Savannah, Georgia, …

Exploration Of Collaborative Design Spaces: Engineering Interactions And Workflows In Product Development, Frederick Rowell

Honors College Theses

Product Lifecycle Management (PLM) initiatives can improve an enterprise’s efficiency by increasing collaborative design opportunities within its business structure. PLM solutions provide digital mediums to collaborate on all aspects of a company’s workflow, including engineering, testing, manufacturing, marketing, business, and field support services. This paper examines the major PLM tools and software used to establish a collaborative engineering design space; computer-aided design (CAD), computer-aided engineering (CAE), computer-aided manufacturing (CAM), and product data management (PDM). The interactions between these PLM tools and a design team’s organizational structure are analyzed to determine some of the most effective PLM integration strategies to improve …

In-House Processing Of Carbon Fiber Reinforced Polyetheretherketone (Cfr-Peek) 3d Printable Filaments And Fused Filament Fabrication Of Cfr-Peek Parts, Harsha Phanindra Sai Naganboyina

ETD Archive

PEEK is a high-performance polymer known for its exceptional mechanical properties, making it suitable for various applications; however, for certain demanding applications such as automotive, PEEK does not exhibit the required strength. Moreover, if the PEEK parts are developed by Fused Filament Fabrication (FFF)-based 3D Printing, there is a high chance of having PEEK parts with decreased mechanical properties. Carbon Fiber (CF) reinforcement is a well-known method of mitigating the low mechanical properties of PEEK. Hence, in the present study, we attempted to develop CF-reinforced PEEK (CFR-PEEK) parts via FFF. First, we developed homogeneous CFR-PEEK mixtures via ball milling and …

Improving Tribological Properties Of Polydopamine/Polytetrafluoroethylene Coatings Through Incorporating Core-Shell Nanoparticles And Laser Surface Texturing, Firuze Soltani-Kordshuli

Graduate Theses and Dissertations

Polytetrafluoroethylene (PTFE) is a widely used polymer that has unique properties such as chemical and temperature resistance, corrosion resistance, low maintenance cost, and a very low coefficient of friction (COF). These distinctive properties have made PTFE a promising candidate for industrial applications where surfaces are in relative motion. PTFE can be utilized as a thin film solid lubricant to significantly reduce the friction between moving surfaces. However, PTFE coatings have low cohesion and poor adhesion to the substrate resulting in its low wear resistance. This fact limits the application of PTFE coatings in load-bearing situations. To address these limitations, an …

Pda/Ptfe Solid Lubricant Coating For 60niti Applications, Charles Richey Miller

Graduate Theses and Dissertations

The intermetallic alloy 60NiTi has a unique combination of high hardness and low elastic modulus, which makes it highly resistant to dents. Additionally, 60NiTi is extremely corrosion resistant and chemically inert. These properties make 60NiTi a desirable material for challenging mechanical component applications with high contact stresses and in harsh environments. However, lubrication issues have hindered the use of 60NiTi because it has poor tribological performance if it is not properly lubricated. The mechanical properties of hardened 60NiTi and its microconstituents were studied by nanoindentation. This study showed that the bulk properties of 60NiTi are driven by the properties of …

Design And Data-Driven Identification Of A Quadruped Robot, Dakota Rufino

All Theses

The existence of nonlinearities and the lack of sufficient equations are fundamental challenges in modeling, analyzing, and controlling complex systems. However, recent developments revolutionizing the study of dynamical systems. An emerging method in nonlinear dynamical systems is the Koopman operator theory, which provides us with key advantages in performing the modeling, prediction, and control of nonlinear systems. The linear system representation allows us to leverage linear stability analysis. The first section of this thesis briefly covers the construction of a quadrupedal robot, a sufficiently complex nonlinear dynamical system, for the use of analyzing data-driven modeling techniques. The second section details …

Enhancing Microstructure, Composition Homogeneity, And Mechanical Properties In Laser Powder Bed Fused Metallic Alloys: Design, Fabrication, And Evaluation, Bahzad Farhang

Mechanical and Aerospace Engineering Dissertations - Archive

ABSTRACT: Over the past five decades, Nickel-based and Titanium-based alloys have become increasingly popular materials. As the manufacturing industry for these alloys has advanced, the demand for fabricating complex parts with enhanced mechanical properties at elevated temperatures has grown. Laser Powder Bed Fusion (LPBF), one of the most prevalent additive manufacturing techniques, has been employed successfully to produce these alloys. Nonetheless, there is still considerable effort being made to improve the microstructural, compositional, and mechanical properties of LPBF-processed components. In this study, we focused on adjusting the multi-scale microstructure and composition of LPBF-fabricated Nickel-based and Titanium-based alloys. The first objective …

Theoretical And Numerical Analysis Of Thermal Runaway Propagation In Li-Ion Battery Packs, Dhananjay Mishra

Mechanical and Aerospace Engineering Dissertations - Archive

Strategies to prevent or minimize propagation of thermal runaway in a pack of Li-ion cells are critically needed to ensure safe operation, storage and transportation. While significant literature already exists on thermal runaway simulations, several key questions of practical relevance have remained unaddressed. This work presents multi-mode heat transfer simulations to predict the onset and propagation of thermal runaway in a pack of cylindrical Li-ion cells. The impact of inter-cell gap and thermal properties of the interstitial material on onset and propagation of thermal runaway is studied. It is shown that high interstitial thermal conductivity promotes thermal runaway propagation. However, …

Steady State And Transient Analysis Of Heat Transfer In A Porous Fin With Radially Outwards Pressure-Driven Flow, Muhammad Mehdi Abbas

Mechanical and Aerospace Engineering Theses - Archive

Thermal management and energy storage problems often utilize extended surfaces, also known as fins for enhanced heat transfer. Today fins are used in a wide range of devices including but not limited to microelectronic components and large heat exchanger. Traditional fins as well as porous fins with flow orthogonal to fin direction have been subject of past research. There is very few academic literature available on porous fins with pressure driven flow along fin direction. While thermal conduction is usually the dominant mode of heat transfer in a solid fin, the use of porous fins that include advective thermal transport …

Development Of Vortex Box (Vbox) And Vortex Tip (Vtip) Filament Free-Wake Rotor Models, Casey Will Matsler

Mechanical and Aerospace Engineering Theses - Archive

Rotor models span from simple static and first order expressions to high fidelity, numerical computations and across the spectrum each model is good for different purposes. The use of models has improved with time and technological capability but choosing the right model for the task is important. A survey of rotor models is performed to identify a rotor model flexible enough for providing high to moderately high-fidelity results without significantly sacrificing computational time. The model chosen is intended to be for general purposes and applicable across a wide range of operating conditions. From the survey, a blade element rotor model …

Evaluation Of Solder Alloys For Bga Package: A Comparative Reliability Study Using Ansys Computational Analysis, Yashvanth Muthegowda

Mechanical and Aerospace Engineering Theses - Archive

Temperature cycling failure of solder joints in Ball Grid Array (BGA) packages has become a critical issue in electronic manufacturing. This thesis specifically characterizes three different lead-free solder alloys (Pure Indium, SAC-387, and SAC-Q) in BGA solder joints using two different printed circuit board (PCB) thicknesses (1mm and 0.7 mm). The analysis considers the non-uniform temperature distribution caused by the main heat source, the die, and the resulting deformation of the package due to the mismatch in the coefficient of thermal expansion (CTE) between components used in BGA. Finite element (FE) models are created in ANSYS mechanical package environment to …

Advancement Of An Inhouse Aerospace Vehicle Design Synthesis System Through The Introduction Of A Novel Database-Knowledgebase System And By Improving The Geometry And Aerothermodynamic Disciplinary Processes, Samuel Atchison

Mechanical and Aerospace Engineering Theses - Archive

Throughout the years of aerospace vehicle design, the process in which a vehicle is designed has drastically improved from being primarily developed through trial and error, to using sophisticated synthesis systems. While the trial-and-error process had its uses with providing the fundamental knowledge of how aircraft behave and can be designed, the increase in knowledge and technology allowed the possibility of more vehicle configurations to be explored without the need to build each one. This increase should have led to a revolution of vehicle designs, and while there have been some novel ones, it seems that the general design of …

Numerical Modeling Of Damper Configuration And Arrangements For Analysing Thermal Stratification In Modular Air Handling Units, Rohit Antony Raymonds

Mechanical and Aerospace Engineering Theses - Archive

Although air handling units are well established and maturated there are opportunities to optimize and improve the overall thermal and flow performance to reduce the carbon footprint of an air-cooled data center. Airside economization (ASE) arrangement to use cold outdoor air to minimize mechanical cooling energy was substantial progress in minimizing the power usage effectiveness (PUE) for data centers. ASE is an arrangement of ducts and dampers with the necessary controls to meet the cooling requirements. Dampers play a significant role in regulating the mass flow rate of the air and in mixing the two air streams: cold outdoor air, …

Effects Of Metal Organic Frameworks In Polyether Block Amide Elastomer, Joe Alex

Mechanical and Aerospace Engineering Theses - Archive

Metal-organic frameworks (MOFs) are highly porous materials that find extensive applications in gas absorption and separation in recent years. These hybrid materials can be designed with specific pore sizes and voids to selectively filter gases. PEBAX (MV 1074) is a commercially available polyether block amide copolymer generally used in gas separation applications. In this study, we characterize two different MOFs by means of a dispersion study and create a medium for them to be evenly dispersed into the aforementioned copolymer matrix. Polymer composite fibers are extruded using a twin-screw extruder and a winding unit at pre-determined parameters for winding speed …

Impact Of Immersion Cooling On Thermo-Mechanical Properties Of Non-Halogenated Core, Mohan Sai Ramalingam

Mechanical and Aerospace Engineering Theses - Archive

The rise in demand for modern high-power systems, which require fast processing and frequent data storage, has resulted in an exceptional and unprecedented increase in power density and heat generation within data centers. This eventually led to the need for advanced cooling techniques that can address the challenges of managing the heat produced by the data centers. As per Moore's law and Dennard's scaling, the power densities of chips and the heat flux generated by servers are continuously increasing. [1] As a result, the dissipation of heat at the chip level has also increased, posing a significant challenge for thermal …

Laser Stabilization Through Optical Turbulence, Liam Vanderschaaf

All Theses

Laser jitter presents a significant issue in the fields of laser communication and sensing. There are two main categories of positional noise in regards to the instantaneous centroid of a laser propagating over long distances: jitter resulting from optical turbulence and jitter resulting from mechanical vibrations. Optical turbulence was generated using Clemson University’s Variable Turbulence Generator (VTG). The VTG is capable of creating a desired level of optical turbulence that is comparable to atmospheric conditions with fried parameters greater than 0.3 cm. A gaussian laser was transmitted through the VTG and a system of Fast Steering Mirrors and Position Sensing …

Compliant Robot Manipulator For Transurethral Diagnosis, Samson A. Adejokun

Mechanical and Aerospace Engineering Dissertations - Archive

ABSTRACT: Minimally invasive procedures employ continuum manipulators, however, the internal human anatomy presents challenges relating to size, dexterity, and workspace for these manipulators. This research presents modeling, kinematic analysis, limited prototyping, and characterization of a micro-robotic manipulator to assess viscoelastic tissue properties of the bladder through transurethral palpation towards the diagnosis of bladder dysfunction, urinary incontinence, and early-stage bladder cancer. The proposed micro-robot consists of two subsystems; a unique 4mm outer diameter tendon-driven continuum segment from assembled “vertebrae” components with male and female snap-in features for joint assembly, an elastic tube encompassing each joint for controlled compliance and structural integrity …

Development Of Femtosecond Laser Electronic Excitation Tagging (Fleet) And Femtosecond Two-Photon Absorption Laser Induced Fluorescence (Fs-Talif) Diagnostics For Species Number Density And Velocity Measurements In Arc-Jet Flows, Daniel William Palmquist

Mechanical and Aerospace Engineering Dissertations - Archive

ABSTRACT: Arc-jet flows are the only ground-test facilities that can recreate hypersonic high-enthalpy flight conditions for long durations. Characterizing these complex flow regimes, generally under thermo-chemical non-equilibrium, is crucial to establishing a relationship between the ground-test environment and flight conditions. This work presents the development of two innovative and world’s first successful application of advanced non-intrusive laser-based diagnostic techniques for characterizing the 1.6 MW ONR-UTA Arc-Heated Wind Tunnel, Leste’s plasma flow. The arc-jet flow represents a unique challenge for the application of laser-based diagnostics due to the highly emitting background across a wide spectral range. Femtosecond Laser Electronic Excitation Tagging …

Fatigue Performance Modeling In Advanced Out-Of-Autoclave Composites For Aerospace Applications, Grayson Reid Curry

Mechanical and Aerospace Engineering Theses - Archive

Increased application of composite materials in the military and civil applications renewed the interest to development of high-fidelity methodologies for predicting their performance characteristics. Besides the traditional autoclave processed structural composites such as IM7/8552 and IM7/977-3 widely used on various platforms, novel materials such IM7/5320-1 suitable for Out-of-Autoclave (OoA) cure became of interest. Static and fatigue performance prediction of Open-Hole quasi-isotropic laminates made from IM7/5320-1 was performed in this work by using the Finite Element Analysis software BSAM. Progressive failure simulation including delaminations, matrix cracks and fiber failure was performed. Regularized eXtended Finite Element Methods (RXFEM) was used for mesh …

Engineering 3d Architected Metamaterials For Enhanced Mechanical Properties And Functionalities., Huan Jiang

Electronic Theses and Dissertations

Compared with conventional materials, architected metamaterials have shown unprecedented mechanical properties and functionalities applications. Featured with controlled introduction of porosity and different composition, architected metamaterials have demonstrated unprecedent properties not found in natural materials. Such design strategies enable researchers to tailor materials and structures with multifunctionalies and satisfy conflicting design requirements, such as high stiffness and toughness; high strength with vibration mitigation properties, etc. Furthermore, with the booming advancement of 3D printing technologies, architected materials with precisely defined complex topologies can be fabricated effortlessly, which in turn promotes the research significantly. The research objectives of this dissertation are to achieve …

Super P-Sulfur Cathodes For Quasi-Solid-State Lithium-Sulfur-Batteries., Milinda Bharatha Kalutara Koralalage

Electronic Theses and Dissertations

Lithium-Sulfur (Li-S) batteries have become a promising candidate to meet the current energy storage demand, with its natural abundance of materials, high theoretical capacity of 1672 mAhg-1, high energy density of 2600 Whkg-1, low cost and lower environmental impact. Sulfide based solid state electrolytes (SSEs) have received greater attention due to their higher ionic conductivity, compatible interface with sulfur-based cathodes, and lower grain boundary resistance. However, the interface between SSEs and cathodes has become a challenge in all solid-state Li-S batteries due to the rigidity of the participating surfaces. A hybrid electrolyte containing SSE coupled with a small amount of …

Modeling, Simulation And Control Of Microrobots For The Microfactory., Zhong Yang

Electronic Theses and Dissertations

Future assembly technologies will involve higher levels of automation in order to satisfy increased microscale or nanoscale precision requirements. Traditionally, assembly using a top-down robotic approach has been well-studied and applied to the microelectronics and MEMS industries, but less so in nanotechnology. With the boom of nanotechnology since the 1990s, newly designed products with new materials, coatings, and nanoparticles are gradually entering everyone’s lives, while the industry has grown into a billion-dollar volume worldwide. Traditionally, nanotechnology products are assembled using bottom-up methods, such as self-assembly, rather than top-down robotic assembly. This is due to considerations of volume handling of large …

Mesoscale Modeling And Machine Learning Studies Of Grain Boundary Segregation In Metallic Alloys, Malek Alkayyali

All Dissertations

Nearly all structural and functional materials are polycrystalline alloys; they are composed of differently oriented crystalline grains that are joined at internal interfaces termed grain boundaries (GBs). It is well accepted that GB dynamics play a critical role in many phenomena during materials processing or under operating environments. Of particular interest are GB migration and grain growth processes, as they influence many crystal-size dependent properties, such as mechanical strength and electrical conductivity.

In metallic alloys, GBs offer a plethora of preferential atomic sites for alloying elements to occupy. Indeed, recent experimental studies employing in-situ microscopy revealed strong GB solute segregation …

Using Immersive Technology To Improve Mechanical Design: Use Cases, A Review Of Current Technology, And An Experiment In Requirement Elicitation In Virtual Reality, William Hawthorne

All Theses

There has been a growing trend in the use of immersive technologies within engineering design. This research is focused on understanding how Virtual Reality (VR) technologies support design reviews. Modern tools including virtual reality hardware and software were tested for current capabilities and challenges. In a review of literature, two key gaps are identified: the rapid advancements of VR and AR technology and limited formal studies to determine the costs and benefits of immersive technology within engineering design reviews. This research has resulted in three key outcomes. First, use cases of immersive reality technologies are identified, through the lens of …