Engineering Commons^™

Use Of Positron Annihilation Spectroscopy For Stress-Strain Measurements, Ajit K. Roy

Transmutation Sciences Materials (TRP)

The purpose of this collaborative research project involving the University of Nevada, Las Vegas (UNLV) and the Idaho State University (ISU) is to evaluate the feasibility of determining residual stresses of welded, bent (three-point-bend), and cold-worked engineering materials using a new nondestructive technique based on positron annihilation spectroscopy. The proposed technique is to use x-rays from a small MeV electron Linac to generate positrons inside the sample via pair production. This method can be used for materials characterization and investigation of defects in thick samples that could not be accomplished by conventional positron technique or other nondestructive methods. The data …

Design And Analysis Of A Process For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides, Yitung Chen, Darrell Pepper, Randy Clarksean

Fuels Campaign (TRP)

UNLV has developed and will continue to develop process models for the analysis of melt casting processes. This work will continue to be performed under the guidance of Argonne National Laboratory (ANL) engineers to insure that their knowledge and experience benefits the project. The research to be conducted during year three will center on performing detailed analyses on a conceptual design of an inductively heated skull-crucible casting furnace. Processing conditions will be analyzed, basic models utilized, and detailed heat and mass transfer models will be developed to analyze the most promising processes. The goal of this third year is to …

Near-Field Calculations For A Rigid Spheroid With An Arbitrary Incident Acoustic Field, John P. Barton, Nicholas L. Wolff, Haifeng Zhang, Constantine Tarawneh

Mechanical Engineering Faculty Publications

A general spheroidal coordinate separation-of-variables solution is developed for the determination of the acoustic pressure distribution near the surface of a rigid spheroid for a monofrequency incident acoustic field of arbitrary character. Calculations are presented, for both the prolate and oblate geometries, demonstrating the effects of incident field orientation and character (plane-wave, spherical wave, cylindrical wave, and focused beam) on the resultant acoustic pressure distribution.

Time Aliasing Methods Of Spectrum Estimation, Jason F. Dahl

Theses and Dissertations

Time aliasing methods of spectrum estimation alter the time representation of a signal for the purpose of improving its frequency domain representation. Time aliasing allows characteristics of longer time window functions to be used with shorter DFT length. Windows designed specifically for use with time aliasing have improved properties compared to conventional windows. Many previous uses of time aliasing, including overlap-and-add methods of digital filtering, have focused on the elimination of time aliasing effects in the frequency domain in order to improve the representation of reconstructed signals in the time domain and have not addressed the issues associated with spectrum …

Sunup To Sundown - Energygauge Usa 2.0, Florida Solar Energy Center, Robin Vieira

FSEC Energy Research Center®

You need special tools to design high-performance homes - residences where energy efficiency creates greater comfort, health, and energy savings. Making decisions about energy efficiency requires the accurate calculation of energy use and demand, and the comprehensive evaluation of proposed improvements.

A new software tool helps meet these requirements. EnergyGauge USA, an hourly simulation tool for the design and analysis of high-performance homes, performs detailed hourly simulation analysis for energy use, ratings and code calculations. Version 2.0 adds many features to the first-generation product, including thermal mass, photovoltaic (PV) system simulation, solar water heating, and detailed hourly outputs.

The software, …

Acoustical Characterization And Parameter Optimization Of Polymeric Noise Control Materials, Emile N. Homsi

Dissertations

The sound transmission loss (STL) characteristics of polymer-based materials are considered. Analytical models that predict, characterize and optimize the STL of polymeric materials, with respect to physical parameters that affect performance, are developed for single layer panel configuration and adapted for layered panel construction with homogenous core. An optimum set of material parameters is selected and translated into practical applications for validation.

Sound attenuating thermoplastic materials designed to be used as barrier systems in the automotive and consumer industries have certain acoustical characteristics that vary in function of the stiffness and density of the selected material. The validity and applicability …

Numerical And Experimental Investigation Of Dry Particle Coating, Ajit Mujumdar

Dissertations

Dry particle coating is an emerging field in the industries that deal with particulate products and powder processing. Compared to the widely reported experimental studies of the dry particle coating, the theoretical modeling of such processes is found to be less comprehensive. The work presented in this thesis is an attempt to fill this gap.

The first part of the dissertation aims at the numerical investigation of the hybridization system (Nara Machinery, Tokyo, Japan). The flow behavior of different materials processed in this device is analyzed using three-dimensional Discrete Element Method (DEM) as well as the computational fluid dynamics (CFD) …

Evaporating Crossflow Sprays In Gas-Solid Flows, Guangliang Liu

Dissertations

Injection of evaporating sprays into gas-solid flows is encountered in many engineering processes such as energy production industry and chemical industry. The phenomenon involves phase change, three-phase interactions, heat and mass transfer. All of these characteristics control the process efficiency, pollutant production and product quality. However, very limited studies are available on the evaporating spray jets in gas-solid flows, especially on the spray evaporation rate within a gas-solid medium. A combined study of experiments and theoretical analysis has been carried out here to investigate the fundamental mechanism of evaporating Crossflow spray jets in gas-solid flows.

In this study, in addition …

Numerical Study Of Pneumatic Conveying Of Powders, Muhammad Mushahid Rafique Quereshi

Theses

The dense phase mode may be advantageous over the dilute phase mode, for some pneumatic conveying problems, because it causes less erosion of the pipeline, less attrition of the material, requires less dust collection and is effective even for smaller pipe diameters. The objective of this study is to numerically determine the parameters that govern the formation slugs in dense phase conveying. The distributed Lagrange multiplier/fictitious domain method (Glowinski et al. 1998 and Singh et al. 2000) is used to perform direct simulations of the motion of solid and gas phases in pipes with rectangular cross-sections. In this approach the …

Electrohydrodynamical Manipulation Of Particles Based On Dielectrophoresis, Oleksii Vasylyschuk

Theses

The movement of matter in a non-uniform electric field, termed dielectrophoresis, is of interest to scientists of various branches: physics, chemistry, engineering, and life science. To chemists and physicists it is a science of many varied phenomena. To engineers it is a source of new and useful techniques for separating materials or improving materials’ behavior. To ecologists it provides a major means of minimizing pollution. To life scientists it offers new ways to study and manipulate cells and their subparticles, and to help unravel the nature of living systems.

The purpose of this thesis is to concentrate on some aspects …

Implementation Of A Two-Dimensional Discrete Element Method To Describe Granular Materials Composed Of Elliptical Cohesionless Particles, Juan Jose Martinez Alvez

Theses

This work is aimed at developing a discrete element simulation that models the contact between elliptical grains or particles in granular materials. The goal is to implement an algorithm to carry out collision detection between ellipses as well as ellipsoidal objects. The practical issue here is that the real shape of macroscopic grains can be approximated better using elliptical curves than using spherical curves. In addition, the simulation model will also be valid for spheres, since these objects are special cases of ellipsoids.

An accurate contact detection algorithm was investigated by means of two different formulations. The first formulation determines …

Computer Simulation Of Automotive Disc Brake Noise, Vadims Milovs

Theses

Disc brake noise continues to be a major concern throughout the automotive industry despite efforts to reduce its occurrence. Many articles are written on this subject, but there still is no agreement on what exactly causes disc brake noise and what part of the braking system is responsible for it.

The goal of current research was to build a simplified but inclusive mathematical model of a disc brake system and investigate it using Matlab software. The twodimensional model including damping, Stribeck effect and stick-slip friction was built.

The model is unique in a way that all the similar models have …

Developing A Sensing System For The Measurement Of Oxygen Concentration In Liquid Pb-Bi Eutectic: Quarterly Progress Report (Nov. 01 – Jan. 31, 2002), Yingtao Jiang, Bingmei Fu, Woosoon Yim

Transmutation Sciences Materials (TRP)

The design of the new apparatus for oxygen measurement/calibration has been completed. This new apparatus shall be of great importance for the UNLV researchers to conduct the research work in the campus.

Jan 2003, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Interim Director Report Open House Suggested to Open Museum on Saturdays

Body Concept Design For Pedestrian Head Impact, S. Iskander Farooq, Peter J. Schuster

Mechanical Engineering

In 1996, the European Enhanced Vehicle Safety Committee, Working Group 17 (EEVC WG17) proposed -a set of impact procedures to evaluate the pedestrian injury risk of vehicle fronts. These procedures address three aspects of pedestrian protection -head impacts, lower limb impacts, and thigh impacts -through vehicle subsystem tests. The criteria assessed during these impact tests are affected by the design of most parts of the vehicle body front-end.

One of the challenges to vehicle design introduced by these tests is the impact of an adult pedestrian headform to the top of the fender. The proposed acceptance level for Head Injury …

Tools And Metrics For Evaluating Modular Product Concepts Based On Strategic Objectives, Matthew Bailey Strong

Theses and Dissertations

The design of modular products has recently become the focus of significant research in the area of design theory and methodology. This focus is the result of increased awareness of the potential power of modularity to achieve certain product objectives. However, there continues to be a gap between the results of academic research and industrial application. The refinement, consolidation, and extension of this academic research would help design teams who are charged with developing modular products to use these academic findings in real world, industrial applications. The research presented in this document focuses on developing design tools, based on past …

Ultrasonic Technique For Investigation Of The Effect Of Grid-Generated Turbulence On Sound Wave Propagation, Tatiana A. Andreeva, William W. Durgin

Office of the Provost Scholarship

This paper concerns an experimental study of the effects of the grid-generated turbulence on the propagation of acoustical waves in a wind tunnel. Turbulence effects are investigated using ultrasound time-of-flight method, employing counter-propagating ultrasonic pulses. Turbulence effects are an important source of error in the active probing of the atmosphere using sound sources. The emphasis is on the propagation time fluctuations and their interpretation using theoretical analysis of Kolmogorov.

Fsec Approved Solar Energy Systems: Domestic Hot Water And Pool Heating, Florida Solar Energy Center, John Harrison

FSEC Energy Research Center®

This listing contains Florida Energy Factors for solar domestic hot water systems that have been approved by the Florida Solar Energy Center (FSEC) for use in the State. These energy factors represent the dimensionless ratio of the hot water energy made available by each approved system divided by the electrical energy used by the system. The Florida Energy Factor (FEF) is used to determine hot water credit multipliers for residential solar water heating systems in the 1993 Florida Energy Efficiency Code for Building Construction. The FEF can also be used to compare the efficiency of solar water heating systems with …

Reynolds-Stress Turbulence Model In The Kiva Code For Engine Simulation, Yeow-Khern Siow

Dissertations, Master's Theses and Master's Reports - Open

A Reynolds-Stress Turbulence Model has been incorporated with success into the KIVA code, a computational fluid dynamics hydrocode for three-dimensional simulation of fluid flow in engines. The newly implemented Reynolds-stress turbulence model greatly improves the robustness of KIVA, which in its original version has only eddy-viscosity turbulence models. Validation of the Reynolds-stress turbulence model is accomplished by conducting pipe-flow and channel-flow simulations, and comparing the computed results with experimental and direct numerical simulation data. Flows in engines of various geometry and operating conditions are calculated using the model, to study the complex flow fields as well as confirm the model’s …

Cool Flames In Propane-Oxygen Premixtures At Low And Intermediate Temperatures At Reduced-Gravity, Howard Pearlman, Michael R. Foster, Devrez Karabacak

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

No abstract provided.

Power Characteristics Of Industrial Air Compressors, Chris Schmidt, J. Kelly Kissock

Mechanical and Aerospace Engineering Faculty Publications

The power draw characteristics of air compressors are primarily determined by the type of compressor control and the relationship between the compressor’s output capacity and the compressed air demand in the plant. In this paper, we review the most common types of compressor control for small reciprocating and rotary air compressors, and derive relations for estimating compressed air output as a function of the type of control and motor loading. Using these relations, we develop a method to estimate the ratio of compressed air output to energy input, which we call the average operating efficiency, based on input power to …

Ole Miss Engineer 2003

Ole Miss Engineer

No abstract provided.

Air Handler Leakage: Field Testing Results In Residences, Florida Solar Energy Center, James Cummings

FSEC Energy Research Center®

Testing was performed to characterize air leakage in 30 air handler cabinets and at connections to supply and return ductwork. Operating pressures were measured in the air handler and plenums. Q 0.1 (Q 25) in the air handler averaged 23.9 cfm (11.3 l/s) in 30 homes. Leakage at the return and supply ductwork connections averaged 3.9 Q 0.1 (1.8 l/s Q 25) and 2.2 Q 0.1 (1.0 l/s Q 25), respectively. Actual return side leakage of 77.5 cfm (36.6 l/s) and supply side leakage of 3.1 cfm (1.5 l/s) are calculated based on Q 0.1 (Q 25) and measured operating …

Acoustic Communication In Two Freshwater Gobies: Ambient Noise And Short-Range Propagation In Shallow Streams, Marco Lugli, Michael L. Fine

Biology Publications

Noise is an important theoretical constraint on the evolution of signal form and sensory performance. In order to determine environmental constraints on the communication of two freshwater gobies Padogobius martensii and Gobius nigricans, numerous noise spectra weremeasured from quiet areas and ones adjacent to waterfalls and rapids in two shallow stony streams. Propagation of goby sounds and waterfall noise was also measured. A quiet window around 100 Hz is present in many noise spectra from noisy locations. The window lies between two noise sources, a low-frequency one attributed to turbulence, and a high-frequency one (200–500 Hz) attributed to bubble …

Experimental Energy Performance Of Open Cooling Towers Used Under Low And Variable Approach Conditions For Indirect Evaporative Cooling Of Buildings, Ben Costelloe, Donal Finn

Articles

The success of chilled ceilings and displacement ventilation systems as a means of sensible cooling in buildings has prompted a review of evaporative cooling technology as an effective means of generating the required cooling water. When such cooling water is generated at low approach conditions (2–5 K), at the higher temperatures required in these systems (14–18°C), very high levels of availability result. In many north western European locations the levels of availability are such that the prospect of supplanting rather than simply supplementing the refrigeration system, for sensible cooling purposes, arises. The viability of the technique, however, largely depends on …

On The Analysis Of Small Displacements Of Truss Joints, Clive L. Dym, Harry E. Williams

All HMC Faculty Publications and Research

By emphasizing the kinematic aspects and implications of strain in truss analysis, it is shown that joint displacements can be computed in a straightforward manner.

Analytical And Fea Analysis Of Silicon Micro-Machined Capacitive Pressure Sensor, Eoghan O'Donoghue

Theses

This thesis is concerned with the electro-mechanical characterisation of MEMS capacitive pressure sensors and the determination of models to describe their behaviour.

The finite element software package ANSYS is validated as a tool for the examination of the electro-mechanical behaviour of capacitive pressure sensors. It is then used to incorporate the effects of applied load, voltage and residual stress into a model of the sensor structure. The capacitive pressure sensor is modelled both in 3D and also in 2D axis-symmetric modes. The error between the 2D and 3D models is quantified.

The behaviour of structures under electrostatic actuation is investigated. …

A Product Architecture-Based Conceptual Dfa Technique, Robert B. Stone, Daniel A. Mcadams, Varghese J. Kayyalethekkel

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A conceptual design for assembly (DFA) method is introduced in this paper. The method incorporates DFA analysis into the conceptual design phase. Current DFA methods, essentially all of which are post-design DFA analyses, are reviewed with emphasis on the popular Boothroyd and Dewhurst method. The product architecture-based conceptual DFA method developed and presented in this article uses two relatively new concepts: the functional basis and the method of module heuristics. The functional basis is used to derive a functional model of a product in a standard language and the module heuristics are applied to the functional model to identify a …

Thermomechanical Behavior Of Rotor With Rubbing, Jerzy T. Sawicki, Alberto Montilla-Bravo, Zdzislaw Gosiewski

Mechanical Engineering Faculty Publications

This article presents an analytical study of the dynamics and stability of rotors subjected to rubbing due to contact with seals, taking account of associated thermal effects. The seal interaction force acting on the shaft gives rise to a friction force, which is a source of heating and can induce so-called spiral vibrations. A mathematical model that has been developed couples the heat-conduction equation with the equations for motion of the rotor. Numerical simulations have been conducted that show the thermomechanical behavior of the rotor at various operating conditions. A procedure for analyzing the stability of multibearing rotors based on …

Nebraska Summary 441: Fendt 714 Vario Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …