Engineering Commons^™

Signal Mast Arm Fatigue Failure Investigation, Genda Chen, Michael G. Barker, Lokeswarappa R. Dharani, Christopher W. Ramsay

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Missouri Department of Transportation (MoDOT) has discovered and documented failures in several cantilever mast arms in the recent years. The failures were primarily by fatigue at the weld of the arm to the base plate attached to the mast. With over 6000 mast arms in service in Missouri, the failures raised concerns with the existing mast arm inventory and future mast arm design. This report presents findings from an effort to determine the cause of unexpected cracking in Missouri mast arms. Three causes of premature failure were investigated: the stress ranges experienced at the weld detail were higher than …

Developing A Sensing System For The Measurement Of Oxygen Concentration In Liquid Pb-Bi Eutectic: Quarterly Progress Report (Feb. 01 – Apr. 30, 2003), Yingtao Jiang, Bingmei Fu, Woosoon Yim

Transmutation Sciences Materials (TRP)

We received most of the components, everything except the customized and outsourced stirrer, for the new apparatus for oxygen measurement/calibration. Thus far, most of the machining work has been completed. The LaveView module used for the data collection and the control of the apparatus has been tested. 2-D simulation work has been performed using FEMLAB.

The Pseudo-Rigid-Body Model For Dynamic Predictions Of Macro And Micro Compliant Mechanisms, Scott Marvin Lyon

Theses and Dissertations

This work discusses the dynamic predictions of compliant mechanisms using the Pseudo-Rigid-Body model (PRBM). In order to improve the number of mechanisms that can be modeled, this research develops and identifies several key concepts in the behavior of beam segments where both ends are fixed to a rigid body (fixed-fixed flexible segments). A model is presented, and several examples are discussed. The dynamic behavior of several compliant segments is predicted using the PRBM and the results are compared to finite element analysis and experimental results. Details are presented as to the transient behavior of a typical uniform rectangular cross section …

Solvent And Method For Extraction Of Triglyceride Rich Oil, Shubhender Kapila, Paul Ki-Souk Nam, V. J. Flanigan

Chemistry Faculty Research & Creative Works

The present invention relates to a solvent for use in extracting oil from an oil bearing material, such as soybeans, with the solvent resulting in the selective extraction of a triglyceride rich oil, which contains 95% or greater triglycerides and non-polar constituents, with the solvent comprised of a hydrocarbon, preferably hexane, and a fluorocarbon, so that the solvent has a viscosity less than 2.6 centipoise and a polarity of less than 0.1. The present invention also relates to a method of using the solvent to extract the triglyceride rich oil, with the method including preferably extracting the oil at a …

Reconstruction Of The Temperature Profile Along A Blackbody Optical Fiber Thermometer, David Gary Barker

Theses and Dissertations

A blackbody optical fiber thermometer consists of an optical fiber whose sensing tip is given a metallic coating. The sensing tip of the fiber forms an isothermal cavity, and the emission from this cavity is approximately equal to the emission from a blackbody. Standard two-color optical fiber thermometry involves measuring the spectral intensity at the end of the fiber at two wavelengths. The temperature at the sensing tip of the fiber can then be inferred using Planck's law and the ratio of the spectral intensities. If, however, the length of the optical fiber is exposed to elevated temperatures, erroneous temperature …

Design And Fabrication Of A Microscale Joule -Thomson Refrigerator, Lionel Gamini Hewavitharana

Doctoral Dissertations

A simple thermodynamic, heat transfer, and fluid flow model was developed for microscale Joule-Thomson refrigerators (JT devices). For a given geometry, the model predicted that the cooling capacity of the refrigerator increased with the inlet refrigerant pressure. The effectiveness of the JT device also increased with the inlet pressure, and the heat exchanger channel length. At a constant inlet pressure, the effectiveness, and the refrigeration capacity of a given JT device increased as the aspect ratio of heat exchanger channels was increased. For nitrogen refrigerant, the model predicted that it was possible to obtain approximately 250 mW of refrigeration capacity …

2003 (Spring) Ensi Informer Magazine, Morehead State University. Engineering Sciences Department

ENSI Informer Magazine Archive

The ENSI Informer Magazine published in the spring of 2003.

Screw Dislocation Interacting With Interface And Interfacial Cracks In Piezoelectric Bimaterials, Xiangfa Wu, Steve Cohn, Yuris A. Dzenis

Department of Engineering Mechanics: Faculty Publications

Interface and interfacial cracks interacting with screw dislocations in piezoelectric bimaterials subjected to antiplane mechanical and in-plane electrical loadings are studied within the framework of linear piezoelectricity theory. Straight dislocations with the Burgers vector normal to the isotropic basal plane near the interface or interfacial crack are considered. The dislocations are characterized by a discontinuous electric potential across the slip plane and are subjected to a line-force and a line-charge at the core. An explicit solution for the screw dislocation in piezoelectric bimaterial with straight interface is found based on the solution of a similar problem for infinite homogenous medium. …

Study About High Influence Doping To Base Resistance And Bandgap Narrowing At Si/Si1-Xgex/Si Heterojunction Bipolar Transistor, Achmad Fadhol

Makara Journal of Technology

Study About High Influence Doping to Base Resistance and Bandgap Narrowing at Si/Si1-xGex/Si Heterojunction Bipolar Transistor. Heterojunction is a link formed bedween two semiconductor materials and differend bandgap which has thinness under 50nm and grow the mixture of plate SiGe as bases. The link is an abrupt link or graded one. In this research learnt formulation of doping concentration influence to basis resistance and bandgap narrowing through Si/Si1-xGex/Si Heterojunction Bipolar Transistor with abrupt emitter-basis link, besides taking care to mobility and basis wide to basis resistance, it is also influence of mole fraction to bandgap power. From the result shows …

Photocatalytic Treatment Of Heavy Metal Waste Cr(Vi) Withtio2 Photocatalyst, Slamet Slamet, Riyadi Syakur, Wahyu Danumulyo

Makara Journal of Technology

Photocatalytic Treatment of Heavy Metal Waste Cr(VI) with TiO2 Photocatalyst. The photocatalytic reduction of hexavalent chromium/Cr(VI) using TiO2 and copper-doped TiO2 as photocatalysts have been studied in stirred tank and circulating photoreactors. All photocatalysts were characterized with FTIR (Fourier Transform Infra Red), BET (Brunauer-Emmett-Teller), XRD (X-Ray Diffraction) and SEM (Scanning Electron Microscope). TiO2 Merck and Degussa P-25 are the commercial photocatalysts used to compare the photocatalytic activity of all the prepared catalysts. Blank test experiments as well as the effect of dopants, EDTA (ethylenediaminetetraacetic acid) and activated carbon addition were studied. Cr(VI) reduction on various pH and initial Cr(VI) concentration …

Development And Analysis Of Geographic Information System For Electricity Network (Case Study: Surabaya Industrial Estate Rungkut In Surabaya)., Lilik Jamilatul Awalin, Bangun Muljo Sukojo

Makara Journal of Technology

Development and Analysis of Geographic Information System for Electricity Network (Case Study: Surabaya Industrial Estate Rungkut in Surabaya). Geographic Information System (GIS) is a system of data which has spatial base. This may be cause has ability to process and analysis data quickly. The ability of GIS will be able to process the alternative in decision making. The need of electric power grows until recent time along with the existence of industrial sector expansion and land use expansion claim better service, large and balance stock of electric power. GIS is a solution for planning and managing data base system, for …

Application Of Remote Sensing And Geographic Information System Methods For Land Using Difference, Bangun Muljo Sukojo, Diah Susilowati

Makara Journal of Technology

Application of Remote Sensing and Geographic Information System Methods for Land Using Difference. Land using difference analysis has been done using remote sensing and Geographic Information System (GIS) methods. Identification of land using difference was conducted using map overlaying process of 1990s (digitized scalling 1:50.000) and 1997s land using map (interpreted from Landsat TM (Thematic Mapper) Image 1997) with UTM (Universal Transverse Mercator) coordinate. Image enhancement was done through histogram equalization with supervised classification devided into 7 classes: rice field, settlement, dry field, industry, pond, sport field and bush. Land using difference and river pollution BOD (Biological Oxygen Demand), COD …

Phase Composition Analysis Using Rietveld Methode And It's Influence To The Hardness Of Ti-Si-N Nanocomposites, Keba Moto, Lia Setiarini, Zufar Abubakar

Makara Journal of Technology

Phase composition analysis using rietveld methode and it’s influence to the hardness of Ti-Si-N nanocomposites. XRD data of nanocomposites Ti-Si-N have been analysed using GSAS based on Rietveld Method in order to identify phases and their composition as well as its influence on the hardness of these nanocomposites. Several new phases have been found in the sample beside the nc-TiN/a-Si3N4& a-/nc-TiSi2 that have been known widely. From the obtained crystalline phase, after the calculation of amorf Si3N4 and TiSi2 phase fraction, it is found that the optimum hardness can be reached when the fraction of a-Si3N4 phase around 8 wt.%

Influence Of Strain Rate And Temperature Of Hot Tension Testing On Mechanical Properties Of Medium Carbon Steel S48c, Dedi Priadi, Iwan Setyadi, Eddy S. Siradj

Makara Journal of Technology

Influence of Strain Rate and Temperature of Hot Tension Testing on Mechanical Properties of Medium Carbon Steel S48C. The characterization of S48C by hot tension testing was done to understanding the influence of temperature and strain rate for S48C flow stress, that close relationship with its forge ability. The hot tension testing was performed on temperatures and strain rates variation (T 850, 900, 950 0C and έ 0,01;1 s-1). The result of hot tension testing showed that increasing temperature decreases ultimate tensile strength (UTS) and flow stress of S48C. The higher decreasing of UTS is on 950 0C about 85% …

A Growth Mixture Theory For Cartilage With Application To Growth-Related Experiments On Cartilage Explants, Stephen M. Klisch, Silvia S. Chen, Robert L. Sah, Anne Hoger

Mechanical Engineering

In this paper, we present a growth mixture model for cartilage. The main features of this model are illustrated in a simple equilibrium boundary-value problem that is chosen to illustrate how a mechanical theory of cartilage growth may be applied to growth-related experiments on cartilage explants. The cartilage growth mixture model describes the independent growth of the proteoglycan and collagen constituents due to volumetric mass deposition, which leads to the remodeling of the composition and the mechanical properties of the solid matrix. The model developed here also describes how the material constants of the collagen constituent depend on a scalar …

Two Dimensional Numerical Simulation Of Highly-Strained Hydrogen-Air Opposed Jet Laminar Diffusion Flames, Kyu C. Hwang

Mechanical & Aerospace Engineering Theses & Dissertations

In this study, a detailed 2-D numerical technique is utilized to investigate the structure, and flame extinction and restoration characteristics of laminar hydrogen-air opposed jet diffusion flames, using both plug (uniform) and parabolic inflow boundary conditions for 3 millimeter jet tubes, spaced 6 millimeters apart and imbedded in low velocity coflows.

First, by using the most recent of two chemical kinetic models, excellent agreement was obtained between calculated distributions of temperature and major species, and published UV laser Raman scattering measurements, for 50% and 100% hydrogen-air flames over a range of input strain rates. Agreement with measured OH profiles was …

Numerical Studies On Supersonic Mixing And Combustion Phenomena, Tarek M. Abdel-Salam

Mechanical & Aerospace Engineering Theses & Dissertations

A numerical study is conducted to investigate the mixing, combustion, and flow characteristics of different scramjet-combustor configurations. Three-dimensional models for the combustors have been used. Numerical results are obtained using a finite volume computational fluid dynamics (CFD) code with unstructured grids with sizes between 200,000 and 400,000 cells.

In the first part of the current study, the effects of the side angle of the fuel injectors in both mixing and combustion processes are investigated. Raised (compression) and relieved (expansion) wall-mounted ramps are used with side angles of 0 (unswept), 5, and 10 degrees. Results are obtained for nonreacting flows as …

Mar 2003, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Foundations Liason Report Development Projects Report Report to the Director

An Approach To Concept Development For Compliant Mechanisms Possessing High Coefficients Of Restitution, Brandon H. Woolley

Theses and Dissertations

The design of structures and mechanisms subject to impact loading has historically involved designing in such a way as to minimize damage induced by the impact. This has historically been accomplished by absorbing and dissipating the energy of the impact. However, in some applications it is desirable to harness the energy and return it to the impacting object to maximize the coefficient of restitution (COR), resulting in large rebound velocities. The use of traditional rigid-body mechanisms to achieve high-COR mechanisms is limited by issues of friction, durability, poor strain-energy distribution and others. Compliant mechanisms do not possess the same limitations …

Modeling, Fabrication, And Optimization Of Niobium Cavities Phase Ii: Third Quarterly Report, Robert A. Schill Jr., Mohamed Trabia

Transmutation Sciences Materials (TRP)

Niobium cavities are important parts of the integrated NC/SC high-power linacs. Over the years, researchers in several countries have tested various cavity shapes. They concluded that elliptically shaped cells are the most appropriate shape for superconducting cavities. The need for very clean surfaces lead to the use of a buffered chemical polishing produce for surface cleaning to get good performance of the cavities. The second phase has resulted in an experimental setup of a fluid flow experiment with experimentation to be completed in the third year. Other experimental activities include the evaluation of a vacuum system and various vacuum equipment …

Dynamics Of Asymmetric Nonlinear Vibration Absorber, Chiou-Fong Chung, Chiang-Nan Chang

Journal of Marine Science and Technology–Taiwan

A dynamics of stability and bifurcation analysis of an asymmetrically nonlinear absorber system that contains a main part and a nonlinear spring is proposed. For this study, the analytical works on this nonlinear vibration absorber were performed by the harmonic balance method and the Floquet theory. Dynamic phenomena due to changing of periodic excitation are analyzed. The investigation fulfils that the bifurcation sequences illustrate completely the complex phenomena of system dynamics. Furthermore, this study show that the primary bifurcation orbit coexist with orbit of the secondary responses via a saddle-node bifurcation in a specific period excitation range. The results demonstrate …

On-Chip Actuation Of Compliant Bistable Micro-Mechanisms, Michael S. Baker

Theses and Dissertations

Two compliant bistable micro-mechanisms have been developed which can be switched in either direction using on-chip thermal actuation. The energy storage and bistable behavior of the mechanisms are achieved through the elastic deflection of compliant segments. The pseudo-rigid-body model was used for the compliant mechanism design, and for analysis of the large-deflection flexible segments. To achieve on-chip actuation, the mechanism designs were optimized to reduce their required rotation, allow them to be switched using linear-motion thermal actuators. The modeling theory and analysis are presented for several design iterations. Each iteration was successfully fabricated and tested using either the MUMPs or …

Thermal Microactuators For Microelectromechanical Systems (Mems), Rebecca Cragun

Theses and Dissertations

Microactuators are needed to convert energy into mechanical work at the microscale. Thermal microactuators can be used to produce this needed mechanical work. The purpose of this research was to design, fabricate, and test thermal microactuators for use at the microscale in microelectromechanical systems (MEMS). The microactuators developed were tested to determine the magnitude of their deflection and estimate their force. Five groups of thermal microactuators were designed and tested. All of the groups used the geometrically constrained expansion of various segments to produce their deflection. The first group, Thermal Expansion Devices (TEDs), produced a rotational displacement and had deflections …

An Investigation Of Compliant Over-Running Ratchet And Pawl Clutches, Gregory Mark Roach

Theses and Dissertations

This thesis proposes that compliant mechanism theory can be used to design over-running ratchet and pawl clutches with reduced part count, lower assembly and manufacturing time while maintaining functionality. An extension of the theory to the micro regime is also briefly addressed. The results of the research show that the ratchet and pawl type of over-running clutch is a good choice for the use of compliance, and the clutch pawls should be loaded in compression to get the largest amount of output torque. It was found that com-pliant mechanism theory can be used to design ratchet and pawl clutches with …

Optomechanical Properties Of Stretched Polymer Dispersed Liquid Crystal Films For Scattering Polarizer Applications, Iciro Amimori, Nikolai V. Priezjev, Robert A. Pelcovits, Gregory P. Crawford

Mechanical and Materials Engineering Faculty Publications

A scattering polarizer is created by subjecting a polymer dispersed liquid crystal (PDLC) film to tensile strain. The optomechanical properties of the film are investigated by simultaneously measuring the stress-strain and polarization dependent optical transmission characteristics. The correlation between transmittances of two orthogonal polarizations and the stress-strain curve reveals that the polymer orientation as well as the droplet shape anisotropy influences the liquid crystal alignment within the droplets. A Monte-Carlo simulation based on the Lebwohl-Lasher model is used to explain the subtle influence of polymer orientation on liquid crystal alignment.

Advances In Experimental Method And Analysis For Estimation Of Geometrically-Necessary Dislocations, Brent L. Adams, Bassem S. El-Dasher, Anthony D. Rollett

Faculty Publications

The authors wish to thank The Alcoa Technical Research Center for supplying the specimens and performing the compression tests. This work was supported by the MRSEC program of the National Science Foundation under DMR-0079996 as well as Lawrence Livermore Laboratory DOE/DoD Joint Program. An behavior of grain boundaries of the polycrystalline materials over a wide range of length scales during plastic deformation is considered. Electron backscattering diffraction and orientation imaging microscopy provide automated scanning measurements of the lattice orientation near grain boundaries. These methods are useful to set the necessary length scales. The data are presented for directionally-solidified pure Al …

A Joint Trajectory Generator For Motion Recovery, Edward Red, Wei Li

Faculty Publications

This paper describes an adaptive S-curve used to recover a tool path upon a system crash in the Windows operating system (OS). For a mechanism such as a robot or machine tool, the joint values, being delivered as setpoints to the servo-controller, are dynamically recorded by the real-time operating system also residing on the computer. The real-time OS can control the abort and record pertinent motion data after Windows OS crash.

Mechanical Computing In Microelectromechanical Systems (Mems), Kenneth C. Bradley

Theses and Dissertations

Mechanical computing devices in polysilicon-based microelectromechanical systems (MEMS) were designed with the goal of developing computing devices for harsh environments, such as those with high dose radiation and high temperatures, as well as devices that may be able to interface with molecular or biological computer systems. The devices that were designed include both analog and digital computing devices. The analog devices include integrators, differentials (summers), multipliers, and those that perform trigonometric functions. The digital devices that were designed are inverters, NAND, NOR, and XOR logic gates. Analog-to-digital (A-to-D) and digital-to-analog (D-to-A) converters were also designed. The designs were submitted to …

The Effects Of Ionizing Radiation On Microelectromechanical Systems (Mems) Actuators: Electrostatic, Electrothermal, And Residual Stress, Jared R. Caffey

Theses and Dissertations

The effects of ionizing radiation on the operation of polysilicon mmicroelectromechanical system (MEMS) electrostatic actuators, electrothermal actuators, and residual stress cantilevers were examined. Pre-irradiation, in-situ, and post-irradiation measurements were taken for the electrosatic and electrothermal actuators. The residual stress cantilevers were characterized before and after irradiation. All devices were irradiated to a total ionizing does of 1 megarad(Si) using both the Air Force Research Laboratory's low energy X-ray source and Co-60 gamma source.

Microstructural Study Of Nanoprecipitates In Rra Treated Al-7075 T6 Using Afm/Ufm/Stem, Samuel J.M. Kuhr, Margaret Pinnell, Daniel Eylon

Mechanical and Aerospace Engineering Faculty Publications

7075 T651 aluminum alloy is frequently used in aircraft applications for its high strength to weight ratio. However, aircraft parts made of this alloy have been plagued by stress corrosion cracking (SCC). Retrogression and re-aging (RRA) is a post T651 two-stage heat treatment that provides improved SCC resistance with minimal loss in tensile strength. In this study, various forms of microscopy and mechanical testing are used to investigate how the RRA process affects the microstructure.

The microscopic observations in this paper show that the precipitates in the aluminum alloy coarsen and that the grain boundary regions are depleted of copper …