Engineering Commons^™

Solid State Aircraft Concept Overview, M. Shahinpoor, P. Jenkins, C. Smith, Kakkattukuzhy M. Isaac, T. Dalbello, Anthony Colozza

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Due to recent advances in polymers, photovoltaics, and batteries a unique type of aircraft may be feasible. This is a "solid-state" aircraft, with no conventional mechanical moving parts. Airfoil, propulsion, energy production, energy storage and control are combined in an integrated structure. The key material of this concept is an ionic polymeric-metal composite (IPMC) that provides source of control and propulsion. This material has the unique capability of deforming in an electric field and returning to its original shape when the field is removed. Combining the IPMC with thin-film batteries and thin-film photovoltaics provides both energy source and storage in …

A Theoretical And Numerical Study Of Thin Film Delamination Using The Pull-Off Test, Zuo Sun, Kai-Tak Wan, David A. Dillard

Mechanical and Aerospace Engineering Faculty Research & Creative Works

An accurate closed-form analytical solution for the strain energy release rate for a thin rectangular film loaded by a central line force using the pull-off test is derived in the presence of a tensile residual stress. the theoretical constitutive relation and the strain energy release rate agree very well with two-dimensional nonlinear finite element analysis for the entire deformation regime ranging from bending plate to stretching membrane. Fracture modes for this pull-off test are also investigated based upon the finite element analysis, offering additional insights to the interfacial delamination. © 2003 Elsevier Ltd. All rights reserved.

Laser Welding Control, Y.-S. Huang, Hai-Lung Tsai, P. Turner, P.-C. Wang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In laser welding of metallic workpieces, the energetic beam is moved over the workpiece surface to form a pool of molten weld metal that quickly solidifies behind the advance of the laser into a weld nugget. The laser beam produces a keyhole of plasma-containing vapor within the molten pool. Weld nugget porosity, due to entrapment of the vapor, is minimized by continually sensing radiation from the molten metal pool to determine pool depth and width and then controlling laser power and speed to continually produce a weld metal pool wide enough for the liquid to fully expel the vapor and …

Building A Comprehensive Energy Model For Off-Highway Vehicles With Emphasis On Vehicle Thermal Control Systems, Ayhan Zora

Dissertations and Theses @ UNI

Utilizing machine and thermal system simulations (vehicle energy models) can be very helpful for vehicle manufacturing companies to develop a machine with acceptable component temperatures, less heat loads to the vehicle cooling systems, and reduced emissions that will also reduce overall product development cycle.

Energy models of vehicles were developed mostly in the automotive industry, and most of these studies were based on partial energy models.

The aim of this research study was to create a comprehensive energy model for agricultural machinery, which will be a basis for future work on similar products. A tractor model from a Midwest off-road …

Towards Automation Of Forensic Facial Reconstruction, Hemant Narendra Khatod

LSU Master's Theses

Forensic facial reconstruction is a blend of art and science thus computerizing the process leads to numerous solutions. However, complete automation remains a challenge. This research concentrates on automating the first phase of forensic facial reconstruction which is automatic landmark detection by model fitting and extraction of feature points. Detection of landmarks is a challenging task since the skull orientation in a 3D scanned data cloud is generally arbitrary and unknown. To address the issue, well defined skull and mandible models with known geometric structure, features and orientation are (1) aligned and (2) fit to the scanned data. After model …

Turbine Blade Tip Cooling And Heat Transfer, Hasan Nasir

LSU Doctoral Dissertations

Turbine blade tip leakage flow from blade pressure side to suction side over the tip surface increases the thermal loading to the blade tip, leading to a high local temperature and thus, is considered one of the primary sources of blade failure. Leakage flow can be reduced by using a recessed or squealer tip blade or by cooling the blade tip to incorporate film cooling. The performance of different recessed tip geometries were investigated and compared with plane tip performance. A transient liquid crystal technique was employed to measure detailed heat transfer coefficient distributions. Coolant injection from holes located on …

Innovative Cooling Configurations For Low Emission Gas Turbine Combustors, Ryan Thomas Hebert

LSU Master's Theses

Presently, effective cooling of modern low NOx combustor liners is achieved through combinations of innovative impingement configurations and other heat transfer enhancement methods. An inherent characteristic of conventional impingement configurations is the occurrence of downstream heat transfer degradation due to increased crossflow effects. In the present study, two different impingement configurations are studied. Both impingement configurations examined in this study aim to increase heat transfer effectiveness by reducing the detrimental effects of spent air crossflow. In Part I, a combination technique wherein impingement is combined with ribs placed in between impingement rows is studied. Three configurations with increased rib placements …

Fabrication And Assembly Of An Array Of Micro Fuel Injector Nozzles For A Trapped-Vortex Combustor, Tracy Ettel Morris

LSU Master's Theses

An array of four fuel injector nozzles, each with micrometer-scale swirlers and a microhole, is created on a single coupon. The nozzles are intended to atomize fuel to blend with swirling air before ejecting into a trapped-vortex combustion chamber. A first-generation metal prototype is fabricated in order to form the micro features, supply the fuel and gas to the nozzles, and guide the mixture to the combustion chamber. Microfabrication methods and precision machining are used to create a multiple plate laminate assembly. The central plate contains the four microholes, which atomize the fuel, and facilitate the swirler structures needed to …

Towards Automated Capture Of 3d Foot Geometry For Custom Orthoses, Rajeev Madazhy

LSU Master's Theses

This thesis presents a novel method of capturing 3D foot geometry from images for custom shoe insole manufacture. Orthopedic footwear plays an important role as a treatment and prevention of foot conditions associated with diabetes. Through the use of customized shoe insoles, a podiatrist can provide a means to better distribute the pressure around the foot, and can also correct the biomechanics of the foot. Different foot scanners are used to obtain the geometric plantar surface of foot, but are expensive and more generic in nature. The focus of this thesis is to build 3D foot structure from a pair …

The Spectral Conforming Model And Its Applications, Jaeho Shim

LSU Doctoral Dissertations

It has been observed that finite element or finite difference model of order can approximate with fair accuracy less than one-third of the eigenvalues of the underlying continuous system corresponding to the low spectrum. The new discrete model, namely the spectral conforming model, is developed to predict the eigenvalues of continuous systems in both the low and high spectra. The spectral conforming models are developed using an inverse vibration method. The classical vibration problem is the direct method. In the direct approach, the characteristic behaviors of the system, i.e. frequency response, natural frequency, and steady state response are analyzed and …

Numerical Methods For The Unsteady Incompressible Navier-Stokes Equations And Their Application To The Direct Numerical Simulation Of Turbulent Flows, Frank Herbert Muldoon

LSU Doctoral Dissertations

Two new methods for the efficient parallel computation of the unsteady incompressible Navier-Stokes equations are presented. Such efficient methods are desired for large scale parallel computations of unsteady turbulent flows such as Direct Numerical Simulations (DNS). The performance of the new methods has a distinct advantage over the artificial compressibility method, in that the methods exhibit robust convergence for a variety of flow problems without extensive need for tuning computational parameters. These methods and others have been implemented in a computer program designed for massively parallel computer architectures, written by the author and used to obtain all results in this …

Numerical And Experimental Investigation Of Transport Processes In Biological Systems, Yimeng He

LSU Master's Theses

This thesis focuses on optimization techniques for transport process during the cryopreservation of biological systems. In the first part of this thesis, a well established shape independent Differential Scanning Calorimeter (DSC) technique was used to measure the dehydration response during freezing of Pacific oyster sperm cells. Volumetric shrinkage during freezing of diploid and tetraploid pacific oyster sperm cell suspensions was obtained at cooling rates of 5 and 20 ˚C/min in the presence of extracellular ice and CPAs. By fitting a model of water transport to the experimentally obtained volumetric shrinkage data the best fit membrane permeability parameters (L_pg and …

A Simplified Thermohydrodynamic Stability Analysis Of The Plain Cylindrical Hydrodynamic Journal Bearings, Sumit Singhal

LSU Master's Theses

A journal bearing is used to support radial loads under high speed operating conditions. In a journal bearing, pressure or hydrodynamic lift is generated in the thin lubricant oil film that separates the shaft and the bushing, thus preventing metal-to-metal contact. Some journal-bearing configurations are susceptible to large-amplitude, lateral vibrations due to a “self-excited instability” known as oil whirl. In order to investigate the effects of lubricant viscosity on oil whirl, a simplified Thermohydrodynamic analysis (THD) analysis of a plain cylindrical journal bearing system has been developed. The “classical” form of the Reynolds equation coupled with simplified, first-order energy equations …

Effects Of Corrosion Prevention Compounds And Overload Induced Residual Stress Field On Fatigue Life In Aluminum Alloy, Jin Hee Park

LSU Master's Theses

Corrosion-Prevention Compounds (CPC) are commonly used to prevent corrosion in the aircraft industry. The presence of corrosive environment (salt-fog, water-fog, even dry air) on aircraft structures has detrimental effects on the integrity of aircraft components which reduces the fatigue life and may accelerate the crack growth rate in the structures. This thesis work is aimed at identifying the effect of CPC and corrosion fatigue on the fatigue life of test specimen. This study describes the results of an experimental study on aluminum alloy 2024-T3 with center-crack specimen to investigate the effect of CPC on fatigue life. Generally, these compounds contain …

Heat/Mass Transfer In Smooth And Ribbed Rectangular Serpentine Passages Of Different Aspect Ratio's And Orientation, Peeyush Agarwal

LSU Master's Theses

An experimental study of heat/mass transfer in rectangular smooth and ribbed serpentine passages with and without rotation in two different aspect ratios (1:4 and 4:1) channel is performed for two different orientations of the test section (90-degree and 45-degree). The Reynolds number is varied in the range of 5,000 to 40,000 and rotation numbers in the range of 0-0.12. Such passages are encountered close to the mid-chord sections or towards the trailing edge of the turbine blade. Two different configurations of the Normal ribs (e/D_h=0.3125, P/e=8 and e/D_h=0.156, P/e=11.2) are placed on the leading and the …

A Novel Mechanical Seal Design With Superior Thermal Characteristics, Anoop Kumar Somanchi

LSU Master's Theses

A mechanical face seal is an important component of variety of pumps used in chemical, petrochemical and process industry. The primary function of a mechanical seal is to prevent leakage of the process fluid from the pump housing and shaft to the environment. The factors that affect the performance of a mechanical seal to leak are friction, wear and its thermal characteristics. Improving upon the thermal characteristics of a mating ring in a mechanical seal would enhance its performance. Implanting a heat exchanger in the mating ring hold great promise for improving the performance of mechanical seals from the viewpoint …

Tissue Interactions With Lasers And Liquid Nitrogen: A Novel Cryopreservation Method, Deepak Kandra

LSU Master's Theses

The importance of the imposed cooling rate in cryopreserving native cells and tissues has been long recognized in the field of cryobiology. When biological tissues are subjected to cooling rates in excess of thousands of degree C per minute, the characteristic structural and physical manifestations of the ice formed are such that the traditional damage due to ice formation at lower cooling rates are suppressed. Hence, achieving high cooling rates in tissues and cells of biologically relevant sizes (mm’s and cm’s) has been a long standing research problem. In the present study, we present a novel technique to achieve high …

Synthesis, Characterization And Tribological Behavior Of Nitrogen-Doped Chromium-Diamond-Like Carbon Nanocomposite Thin Films, Sunil Kumar Pal

LSU Master's Theses

Diamond-like carbon (DLC) films have been extensively studied for more than two decades due to their highly attractive properties. These films exhibit unique mechanical, chemical and electronic properties and thus, possess great potential for applications in tribology. However, two drawbacks in the DLC films are high level of internal stress developed during growth preventing deposition of thick films and low thermal stability. Synthesis of Me-DLC (Cr-DLC and N-doped Cr-DLC) presents a way to overcome these drawbacks. In the present study, DLC, Cr-DLC and N-doped Cr-DLC films were deposited on Si substrate using a hybrid Plasma assisted CVD/PVD process. Film characterization …

Ultra Deep Su-8 Manufacturing And Characterization For Mems Applications, Charles Joseph Becnel

LSU Master's Theses

The Micro Systems Engineering Team (mSET) at Louisiana State University (LSU) utilizes microfabrication for a number of heat and mass transfer devices. These include cross flow heat exchangers, mechanical seals with integrated micro heat exchangers, catalytic converters, and micro reactors. In all of these applications, micro honeycomb arrays provide increased surface area per unit volume which significantly enhances heat and mass transfer. In the past, it was only possible to fabricate SU-8 structures approximately 1.5 mm tall. Furthermore, qualitatively, it is much more difficult to fabricate close packed feature arrays than sparse arrays. For many of the previously mentioned applications, …

Evaluation Of The Flail Space Model Utilizing Event Data Recorder Technology, Douglas John Gabauer

Theses and Dissertations

Developed in the early 1980's, the flail space model has become the standard method for estimating occupant risk in full-scale crash tests involving roadside safety features. The widespread availability of airbags and increased seat belt usage rates in today's vehicle fleet, however, raise serious questions regarding the validity of the model. Recent implementation of Event Data Recorder (EDR) technology in a number of late model vehicles presents a different perspective on the assessment of the validity of occupant risk based on the flail space model. EDRs are capable of electronically recording data such as vehicle speed, brake status and throttle …

Simulation Of The Communication Process In A Pin Mill, Ambrose J. M. Itika

Tanzania Journal of Engineering and Technology (TJET)

Prediction of the performance of comminution equipment by mathematical models and simulation poses a great challenge to the chemical engineer. This paper describes the simulation of grinding results obtained using an impact mill. Single particle results have been used to generate breakage and selection coefficients that were used for the evaluation of the model. Results have shown that simulation model is in good agreement with the experimental data obtained at a circumferential speed above 60 m/s. At lower speeds, the models shows only partial agreement in the middle particle size ranges. The application of the model is therefore limited for …

Trailer Mounted Bursting Energy Absorption System, John D. Reid, John R. Rohde, Dean L. Sicking

Department of Mechanical and Materials Engineering: Faculty Publications

A portable crash attenuation System having a trailer frame and an energy absorption mechanism attached thereto. The absorption mechanism has a first Stage pivotably connected to a Second Stage and the Second Stage is pivotably connected to the frame. By pivoting the Stages about hinges the attenuation System may be folded from an extended, deployed position or mode to a shortened transit mode for easy relocation of the entire attenuation System.

Enhanced Practical Photosynthetic Co₂ Mitigation, David J. Bayless, Morgan Lefay Vis-Chiasson, Gregory G. Kremer

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This process is unique in photosynthetic carbon sequestration. An on-site biological sequestration system directly decreases the concentration of carbon-containing compounds in the emissions of fossil generation units. In this process, photosynthetic microbes are attached to a growth surface arranged in a containment chamber that is lit by solar photons. A harvesting system ensures maximum organism growth and rate of CO₂ uptake. Soluble carbon and nitrogen concentrations delivered to the cyanobacteria are enhanced, further increasing growth rate and carbon utilization.

Establishing A Quantitative Foundation For Exactly Constrained Design, Alisha M. Hammond

Theses and Dissertations

Exactly constrained (EC) design is a robust design method which can be used for mechanical assemblies. It entails using the minimum number of constraints to eliminate all desired motion.

While found by some engineers in industry to have many benefits (including robust assembly, no binding or play, ease of assembly, and the ability to tolerate the wear of parts), EC designs remain somewhat unrecognized by academia. One reason for this minimal exposure may be the lack of a quantitative foundation for such designs. This thesis describes the history and current background for EC designs, and it also begins to develop …

Selecting Appropriate Product Concepts For Manufacture In Developing Countries, Danielle Johnson

Theses and Dissertations

There is a noticeable lack of production of indigenously engineered and manufactured products in Less Developed Countries (LDC's). Few products developed in these LDC's could be viable in competitive markets or even sold as components and supplies to other manufacturers of competitive goods. Assumintg that these less developed countries do not innovate and manufacture because they cannot, the next logical question to ask is why can they not?

This thesis looks at the problems of manufacture and design in LDC's from the standpoint of Product Development. It begins by looking at development theories, namely top down and bottom up and …

Dec 2003, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Introductions Curator's Report Treasurer's Report

Computer-Aided Optimal Design Of A Single-Chamber Muffler With Side Inlet/Outlet Under Space Constraints, Long-Jyi Yeh, Ying-Chun Chang, Min-Chie Chiu, Gaung-Jer Lay

Journal of Marine Science and Technology–Taiwan

Whilst the muffler dimension is often limited inside a building or machine room, the consideration of maximal sound transmission loss (STL) under space constraints becomes important and essential to the field of acoustics. In this paper, the optimal design of a singlechamber muffler with side inlet/outlet is comprehensively presented. Both the graphic analysis and the computer-aided numerical assessments are also fully described in this study. With the computer graphic analysis on sensitivity, one set of design data is derived primarily, and the numerical searching algorithm of iteration technique and the initial design data are then carried out. These results are …

Processes For Nanomachining Using Carbon Nanotubes, Robert Ryan Vallance, Apparao M. Rao, M. Pinar Mengüç

Mechanical Engineering Faculty Patents

Novel methods and devices for nanomachining a desired pattern on a surface of a conductive workpiece are disclosed. In one aspect, the method comprises using an electron beam emitted from one or more nanotubes to evaporate nanoscale quantities of material from the workpiece surface. The surface of the workpiece to be machined may be excited to a threshold energy to reduce the amount of power required to be emitted by the nanotube. In another aspect, a device is described for nanomachining a desired pattern on a surface of a conductive workpiece, comprising a vessel capable of sustaining a vacuum, a …

Adoption Of Variable Rate Technology, Isti Surjandari, Marvin T. Batte

Makara Journal of Technology

Site Specific Management (SSM), which also variously referred to as Variable Rate Technology (VRT), is an emerging technology that enables producers to make more precise input application decisions based on soil and field characteristics. This study analyzes factors influencing the adoption of VRT for fertilizer application for cash grain production in Ohio. Results show that producer and field characteristics might influence the adoption decision on various SSM components differently. It also provides insight as to the sequence of adoption of SSM component technologies and how this sequence might differ for producers of differing characteristics.

Study On Electrochromic Effect Of Polyaniline Film, Lienda Handojo, Junus Simangunsong

Makara Journal of Technology

Study on Electrochromic Effect of Polyaniline Film. The light transmission factor of an electrochromic film changes reversibly with the application of an electrical voltage. Thereby the transparent film becomes reversibly opaque so that it may be used to control light transmission. In this paper the results of a study on polyaniline film as an electrochromic active material is reported. Polyaniline looks yellow transparent in the reduced state and turns to green-blue at its oxidized state. The electrochromic device considered in this paper was fabricated in planar configuration of ITO glass − polyaniline film − electrolyte − ITO glass which involved …