Engineering Commons^™

Thermal Control Of An Occupied Room: Investigating The Use Of Carbon Dioxide Concentration As An Auxiliary Control Variable, Kevin O'Connell, Aidan O'Dwyer

Conference papers

This paper details the theoretical and experimental work done in the examination of the relationship between human generated carbon dioxide concentration and temperature rise in an occupied room. Generation of carbon dioxide by humans is linked to metabolic rate and heat generation. Therefore, carbon dioxide concentration may be used as an indicator of occupancy in a room. Typically, a heating control system will react slowly to changes in room occupancy if temperature is used as the process variable. The aim of the work was to establish if carbon dioxide concentration in the space could be used as an auxiliary control …

Optimal Neuro-Controller Synthesis For Impulse-Driven System, Xiaohua Wang, S. N. Balakrishnan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper presents a new controller design technique for systems driven with impulse inputs. Necessary conditions for optimal impulse control are derived. A neural network structure to solve the resulting equations is presented. The solution concepts are illustrated with a few example problems that exhibit increasing levels of difficulty. Two linear problems-one scalar and one vector-and a benchmark nonlinear problem-Van Der Pol oscillator-are used as case studies. Numerical results show the efficacy of the new solution process for impulse driven systems. Since the theoretical development and the design technique are free from restrictive assumptions, this technique is applicable to many …

Determination Of Laser Absorption Coefficients Of Gas Mixtures Using An Ab Initio Md Model, Zhi Liang, Hai-Lung Tsai, Lan Jiang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In an Effort to Study the Laser Induced Dissociation of Gas Mixtures for an Ongoing Research Project on Diamond Thin Film Coating using Multiple Lasers, It is Necessary to Determine the Absorption Coefficient of Laser Energy by CO2 Gas. an Ab Initio Molecular Dynamics (AIMD) Model is Used to Determine the Laser Absorption Coefficient of CO2 Gas as a Function of Laser Wavelength and Gas Temperature. the Translational, Rotational, and Vibration Motions of Molecules Are All Taken into Account in Our Model. the Intra-Molecular Potential Energy is Obtained by Solving the Kohn-Sham Equation. the Projector-Augmented Wave (PAW) Exchange-Correlation Potential Function …

Granular Contact Lubrication: Theory And Experiment, Karim El Kholy

LSU Doctoral Dissertations

This dissertation is devoted to a theoretical and experimental study of the granular contact lubrication, both. The theory is based on the kinetic of the granular material where the granules interact with each other and with the boundary surfaces through instantaneous, binary collisions, characterized by a constant coefficient of restitution. Specifically this study focuses on granular lubrication in Couette flows. A series of simulations is reported and the results show good agreement with several published papers. Also, a theory that ties the true temperature to the grain mobility is developed. The true temperature of a granular material depends on the …

Development Of Micropump For Microfluidic Applications, Dong Eun Lee

LSU Doctoral Dissertations

This dissertation covers the research work on two types of micropumps, one is based on magnetohydrodynamic (MHD) principle that utilizes Lorentz force for actuation, and the other is based on electrochemical actuation. The AC-type MHD micropump was designed and analyzed as a solution to the bubble formation problem encountered in DC-type MHD micropump. A UV-LIGA process using thick layer of SU-8 negative photoresist was successfully developed to microfabricate the AC MHD micropump. Preliminary studies and tests of the AC MHD micropumps demonstrate that bubble formation was significantly reduced to permit the proper function of the micropump. A continuous flow was …

Characterization Of Advanced Composites- A Nondestructive Approach, Phani Surya Kiran Mylavarapu

LSU Doctoral Dissertations

Adhesively bonded sandwich structures comprising of particulate composites as core and graphite epoxy skins as stiffeners are widely used for various applications in the marine and aerospace industry. The core material and the stiffener are held together by an adhesive bond. Particulate composites are made from a mixture of a polymer resin and hollow or solid particles. Hollow particulate composites are known as syntactic foams. Particulate composites possess attractive mechanical and physical properties such as high compressive strength etc, making them attractive materials for use in structural applications. Characterization of the adhesive bondline and core material in sandwich structures is …

Turbulence Modeling For Film Cooling Flows, Asif Hoda

LSU Doctoral Dissertations

An improved two equation turbulence model has been developed in this dissertation to better predict the complex film cooling flow field that is formed from the interaction of a coolant jet and a crossflow over a modeled turbine blade surface. Film cooling of turbine blades is commonly employed to effectively protect turbine blades from thermal failure and thereby to allow higher inlet temperatures in order to increase the efficiency of gas turbine engines. Film cooling involves the injection of rows of coolant jets from slots on the surface of a turbine blade which is then bent over by the crossflow …

Eigenvalue Optimization And Its Applications In Buckling And Vibration, Srinivas Gopal Krishna

LSU Doctoral Dissertations

Eigenvalue problems are of immense interest and play a pivotal role not only in many fields of engineering but also in pure and applied mathematics. An in-depth understanding of this class of problems is a pre-requisite for vibration and buckling analyses of structures. Design optimization of structures to prevent failure due to instability (bucking) and vibration introduces the problem of determining optimal physical parameters such that load carrying capacity or the fundamental natural frequency is maximized. A classical example of such problems is the Lagrange problem of determining the shape of the strongest column against buckling. The primary objective of …

An Investigation Of The Frictional And Thermal Behavior Of Oscillatory Sliding Line Contacts, Mongi Mansouri

LSU Doctoral Dissertations

This research deals with an experimental and numerical investigation of the frictional and thermal behavior of pin-bushing pairs, operating at reciprocating sliding motion or under heavy loads. Large interfacial temperatures developed due to frictional heating can cause failure. Therefore, numerical prediction and analysis of the surface temperature under various operating conditions are important. Laboratory tests using a pin-bushing tester provided measurements of the friction coefficient and temperature. Hard coated and plain (uncoated) bushings, both made of induction hardened stainless steel, were tested. Lower coefficient of friction and surface temperature were observed in the case of the coated bushing. In the …

Measurements And Computations Of The Flow In Full-Scale Sugar Evaporative-Crystallizers And In Lab-Scale Models, Luis Fernando Echeverri

LSU Doctoral Dissertations

The circulation of massecuite is a key factor in achieving efficient heat transfer and crystallization in sugar evaporative crystallizers, and should be as high as practically possible for recovery, quality, and capacity reasons. This research report presents results on the circulation obtained applying modern experimental and numerical techniques. The main goals are contributing to expand the understanding of the process in sugar crystallizers; developing realistic models for the simulation of the circulation; and studying the effect of different design parameters. The circulation of massecuite is driven by buoyancy force due to density difference between the vapor generated and the surrounding …

Flow Field And Heat Transfer Analyses Of Mechanical Seals, Zhaogao Luan

LSU Doctoral Dissertations

Mechanical seals are widely used in rotating equipment such as pumps, turbines and agitators to prevent leakage. One crucial factor for keeping seals reliable is the thermal behavior of the seal rings. The existing literature on thermal effects in seals primarily concentrates on the conduction of heat into the rings. Yet, a more complete analysis requires understanding of the flow field around the rings. In this dissertation, both the laminar and turbulent flows within the seal chamber are studied and their effects on the heat transfer in the seal rings are evaluated. Based on extensive sets of numerical simulations, heat …

In-Situ Optimized Pwas Phased Arrays For Lamb Wave Structural Health Monitoring, Lingyu Yu, Victor Giurgiutiu

Faculty Publications

No abstract provided.

Using Building Energy Simulation And Geospatial Modeling Techniques In Determine High Resolution Building Sector Energy Consumption Profiles, Shem C. Heiple

Dissertations and Theses

A technique is presented for estimating hourly and seasonal energy consumption profiles in the building sector at spatial scales down to the individual taxlot or parcel. The method combines annual building energy simulations for cityspecific prototypical buildings and commonly available geospatial data in a Geographical Information System (GIS) framework. Hourly results can be extracted for any day and exported as a raster output at spatial scales as fine as an individual parcel (

Transient Performance Of Closed Loop Thermosyphons Incorporating Thermal Storage, Kyle S. Benne

Masters Theses

This thesis considers a unique application of a thermosyphon to a conventional thermal storage deice. In such an application, the dynamics of the thermosyphon are coupled with the condition of the storage volume. This thesis specifically focuses on the transient energy addition or charge process, where heat accumulated within the storage volume continuously decreases the driving buoyant force and volumetric flow rate"--Abstract, page iv.

Development, Modeling, And Simulation Of A Nano Aerial Vehicle Using Empirical Data, Wyatt Emery Davenport

Masters Theses

"The ultimate goals of this study were to use experimental data to estimate the flight capabilities of a flapping wing nano aerial vehicle (NAV), estimate the power required to provide such flight, and develop a controller approach for future use in the design of this aircraft. The experimental data is a collection of measurements of the normal force on a flapping wing taken in stationary water, and was used to develop empirical coefficient derivatives for use in the dynamic modeling of the NAV"--Abstract, page iii.

Dynamics Of Wave-Current Boundary Layers Over Very Rough Boundaries, Marion Bandet-Chavanne

Link Foundation Ocean Engineering and Instrumentation Fellowship Reports

In this study, acoustic profiling techniques are used to resolve the two-dimensional spatial structures of the oscillating boundary layer in a phase-averaged sense over a wave orbital amplitude. The principal objective of this work is to examine the spatial variability of turbulent properties over irregular roughness. Field observations are used to investigate the interaction between bottom roughness, flow structure and turbulent properties within the near-bed flow. The overall focus of the research is to relate wave energy dissipation or friction factor estimates to physical roughness elements and understand the dynamics of such processes in the near-bed flow.

Semi-Autonomous Control Of Autonomous Underwater Vehicles, Stephen C. Martin

Link Foundation Ocean Engineering and Instrumentation Fellowship Reports

The goal of my graduate research is to address two engineering science problems whose solution will enable Autonomous Underwater Vehicles (AUVs) to routinely perform semi-autonomous missions presently considered impractical or infeasible. I am pursuing this research under the direction of Professor Whitcomb in the Dynamical Systems and Controls Laboratory at Johns Hopkins University, and in collaboration with the faculty of the Deep Submergence Laboratory of the Woods Hole Oceanographic Institution (WHOI).

In the last decade AUVs have begun to complement Human Occupied Vehicles (HOVs) and Remotely Operated Vehicles (ROVs) as effective platforms for oceanographic exploration. HOVs and ROVs are highly …

Regional Mechanical Properties And Stress Analysis Of The Human Anterior Lens Capsule, Ryan M. Pedrigi, G. David, J. Dziezyc, J. D. Humphrey

Department of Mechanical and Materials Engineering: Faculty Publications

The lens capsule of the eye functions, in part, as a deformable support through which the ciliary body applies tractions that can alter lens curvature and corresponding refractive power during the process of accommodation. Although it has long been recognized that characterization of the mechanical properties of the lens capsule is fundamental to understanding this physiologic process as well as clinical interventions, prior data have been limited by one-dimensional testing of excised specimens despite the existence of multiaxial loading in vivo. In this paper, we employ a novel experimental approach to study in situ the regional, multiaxial mechanical behavior of …

A Scientific Foundation Of Collaborative Engineering, S. C.-Y. Lu, W. Elmaraghy, G. Schuh, R. Wilhelm

Department of Mechanical and Materials Engineering: Faculty Publications

Collaborative engineering is the practical application of collaboration sciences to the engineering domain. In today’s highly connected technology-driven economy, the production industry must rely on the best practices of collaborative engineering to stay competitive when designing, manufacturing, and operating complex machines, processes, and systems on a global scale. Despite its importance, collaborative engineering is currently more of a practiced art than a scientific discipline. A better understanding of how engineers should collaborate with all stakeholders to accomplish complex tasks that fulfill our increasing social responsibilities is a grand challenge. However, because we currently lack well-defined sciences of human collaboration, we …

Origin Of Photomultiplication In C60 Based Devices, Jinsong Huang, Yang Yang

Department of Mechanical and Materials Engineering: Faculty Publications

In this manuscript, the origin of the photomultiplication effect was studied in C₆₀ based devices by evaluating the wavelength dependent external and internal quantum efficiencies under various biases. The effect of materials with disordered structures on the photomultiplication effect was determined by intentionally integrating both ordered and disordered material structures into one organic solar cell device with a configuration of indium tin oxide/poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS)/pentacene/C₆₀ fullerene/bathocuproine (BCP)/Al. Our results show that both the disordered structure of C₆₀ and the charge trapping effect at the C₆₀ /PEDOT:PSS interface contribute to the photomultiplication effect. By studying the C60-only …

Low Voltage And Fast Speed All-Polymeric Optocouplers, Yan Yao, Hsiang-Yu Chen, Jinsong Huang, Yang Yang

Department of Mechanical and Materials Engineering: Faculty Publications

An all-polymeric optocoupler has been demonstrated with a polymer light-emitting diode (PLED) as the light source (input unit) and a polymer/fullerene photodiode (PD) as the detector (output unit). The electroluminescence (EL) peak of the PLED is 560 nm, and the entire EL spectrum is within the response range of the PD. The optocoupler can work at low driving voltages, 5 V on the PLED and 0 V on the PD. The output photocurrent increases linearly with input current, and the current density transfer ratio reaches 1.5%. The frequency response of the optocoupler is at 500 kHz. With comparable performance to …

Capacitance Metrology Of Curved Surfaces: Study And Characterization Of A Novel Probe Design, Philip T. Smith Jr.

University of Kentucky Doctoral Dissertations

Capacitive sensors are frequently applied to curved target surfaces for precision displacement measurements. In most cases, these sensors have not been recalibrated to take the curvature of the target into consideration. This recalibration becomes more critical as the target surface becomes smaller in comparison to the sensor. Calibration data are presented for a variety of capacitance probe sizes with widely varying geometries. One target surface particularly difficult to characterize is the inner surface of small holes, less than one millimeter in diameter. Although contact probes can successfully measure the inner surface of a hole, these probes are often fragile and …

Neural Network Controller Development And Implementation For Spark Ignition Engines With High Egr Levels, Jonathan B. Vance, Atmika Singh, Brian C. Kaul, Jagannathan Sarangapani, J. A. Drallmeier

Electrical and Computer Engineering Faculty Research & Creative Works

Past research has shown substantial reductions in the oxides of nitrogen (NOx) concentrations by using 10% -25% exhaust gas recirculation (EGR) in spark ignition (SI) engines (see Dudek and Sain, 1989). However, under high EGR levels, the engine exhibits strong cyclic dispersion in heat release which may lead to instability and unsatisfactory performance preventing commercial engines to operate with high EGR levels. A neural network (NN)-based output feedback controller is developed to reduce cyclic variation in the heat release under high levels of EGR even when the engine dynamics are unknown by using fuel as the control input. A separate …

Near Optimal Output-Feedback Control Of Nonlinear Discrete-Time Systems In Nonstrict Feedback Form With Application To Engines, Peter Shih, Brian C. Kaul, Jagannathan Sarangapani, J. A. Drallmeier

Electrical and Computer Engineering Faculty Research & Creative Works

A novel reinforcement-learning based output-adaptive neural network (NN) controller, also referred as the adaptive-critic NN controller, is developed to track a desired trajectory for a class of complex nonlinear discrete-time systems in the presence of bounded and unknown disturbances. The controller includes an observer for estimating states and the outputs, critic, and two action NNs for generating virtual, and actual control inputs. The critic approximates certain strategic utility function and the action NNs are used to minimize both the strategic utility function and their outputs. All NN weights adapt online towards minimization of a performance index, utilizing gradient-descent based rule. …

Incorporating The Effects Of Magnetic Saturation In A Coupled-Circuit Model Of A Claw-Pole Alternator, Hua Bai, Steven Pekarek, Jerry L. Tichenor, Walter Eversman, Duane J. Buening, Gregory R. Holbrook, Ronald J. Krefta

Electrical and Computer Engineering Faculty Research & Creative Works

A method of representing the effects of magnetic saturation in a coupled-circuit model of a claw-pole alternator is presented. In the approach considered, the airgap flux density produced by each winding is expressed as a function of magnetic operating point. A challenge in the implementation is that the airgap flux densities consist of several significant harmonics, each of which changes at a distinct rate as iron saturates. Despite this complication, it is shown that relatively simple measurements can be used to determine model parameters. The model is implemented in the analysis of several alternator/rectifier systems using a commercial state-model-based circuit …

A Computational Theory For The Generation Of Solutions During Early Conceptual Design, Cari R. Bryant

Doctoral Dissertations

"Advancement in technology is usually made by building on previous experiences and learning from past successes and failures. However, knowledge transfer in the broad field of product design is often difficult to accomplish. Research has shown that successful component configurations, observed from existing products, can be dissected and stored for reuse; but few computational tools exist to assist designers during the conceptual phase of design. Many well-known manual methods (e.g. brainstorming, intrinsic and extrinsic searches, and morphological analysis) rely heavily on individual bias and experience and are often time intensive, laborious tasks that may not catch solutions that are functionally …

Obstacle And Terrain Avoidance For Miniature Aerial Vehicles, Timothy Mclain, Jeff Saunders, Blake Barber, Randall W. Beard, Stephen R. Griffiths

Faculty Publications

Unmanned aerial vehicles (UAVs) are playing increasingly prominent roles in defense programs and strategy around the world. Technology advancements have enabled the development of large UAVs (e.g., Global Hawk, Predator) and the creation of smaller, increasingly capable UAVs. The focus of this Chapter is on smaller fixed-wing miniature aerial vehicles (MAVs), which range in size from % to 2 m in wingspan. As recent conflicts have demonstrated, there are numerous military applications for MAVs including reconnaissance, surveillance, battle damage assessment, and communications relays.

Compliant High-Precision E-Quintet Ratcheting (Cheqr) Mechanism For Safety And Arming Devices, John A. Kennedy, Larry L. Howell, William Greenwood

Faculty Publications

Ratchet and pawl mechanisms are used in safety applications to provide mechanical isolation between inputs and an output to insure that extreme environmental conditions do not inadvertently allow an unexpected output. These devices have become smaller and are approaching a size regime where traditional precision components, such as precision bearings and springs, are not available. This paper introduces the Compliant High-precision E-Quintet Ratcheting (CHEQR) mechanism as a means of exploiting the advantages of compliant mechanisms to create safety devices that eliminate the need for bearings and springs. The pseudo-rigid-body model was used to design a mechanism with the desired force-deflection …

An Analysis Of The Study Of Mechanical Properties And Microstructural Relationship Of Hsla Steels Used In Ship Hulls, Htay Aung

World Maritime University Dissertations

No abstract provided.

Functional Disaster Resistant Buildings, Florida Solar Energy Center, William Young

FSEC Energy Research Center®

Natural disasters, such as hurricanes, floods, tornados, tsunami and earthquakes, are becoming a greater problem as they destroy lives, homes, businesses and the natural environment. Such disasters can happen with little or no warning, leaving hundreds or even thousands of people without medical services, potable water, sanitation, communications and electrical services for up to several weeks. One proactive strategy to minimize this type of destruction and disruption to lives is the implementation of disaster-resistant buildings that are energy efficient, fortified to the latest codes, and incorporate renewable energy systems. This approach uses the best energy-efficient buildings, fortified to the latest …