Engineering Commons^™

Decarbonization Of The Fishing Fleet In The Galapagos Islands : Governance Challenges And Opportunities For Implementing Renewable Energy Sources, Byron Eduardo Robles Romero

World Maritime University Dissertations

No abstract provided.

The Problem Of Noise Pollution In Chinese Waters : Can The Current National Legal Framework Tackle The Problem?, Zhou Wang

World Maritime University Dissertations

No abstract provided.

Preparedness And Response To Oil And Biofuel Spills : A Case Study Of The Western Indian Ocean, Soifoine Abdillah

World Maritime University Dissertations

No abstract provided.

Towards Zero Emissions Ports In Saudi Arabia : Drivers, Barriers, And Opportunities, Saad Hulil S Alshahrani

World Maritime University Dissertations

No abstract provided.

Oil Spill Pollution In The Caspian Sea In Case Of Azerbaijan : Evaluating Spill Patterns And Governance Gaps In Azerbaijan’S Marine Oil Pollution Response, Ulviyya Hasanova

World Maritime University Dissertations

No abstract provided.

Assessment Of Recreational Safety Protocols In Philippine Beaches And Resorts : A Coast Guard Perspective, Jazzyneth Cacnio

World Maritime University Dissertations

No abstract provided.

Port State Control In The Philippines : Addressing Challenges And Recommending Pathways For Enhancing Qualification And Operational Effectiveness, Kethlynn Mae Nadal

World Maritime University Dissertations

No abstract provided.

Maritime Risk Management Of Methanol Bunkering : Study On Key Points Of Ship Supervision And Inspection, Baozhong Li

World Maritime University Dissertations

No abstract provided.

Integrating Environmental Impact Assessment Into International Shipping Governance : A Bbnj-Pssa Synergy Framework, Thi Thuy Linh Pham

World Maritime University Dissertations

No abstract provided.

A Study On The Influence Of Ship Type And Size On Co2 Emissions Based On The Eu Mrv Data, Sangdae Seo

World Maritime University Dissertations

No abstract provided.

Occupational Safety In Fishing Vessels : A Comparative Analysis Of Namibia, South Africa And Mozambique In The Sadc Region, Fiina Ndakulilwa Twiihaleni Shaanika

World Maritime University Dissertations

No abstract provided.

Optimization Of Aids To Navigation System In Papua New Guinea, Justus Wayne

World Maritime University Dissertations

No abstract provided.

Assessing Spatial And Temporal Patterns Of Industrial Bottom Trawlers Using Vessel Monitoring System Data : A Case Study Of Ghana, Emmanuel Agbeko

World Maritime University Dissertations

No abstract provided.

Evaluating The Implementation Of The Ballast Water Management Convention In Nigeria : The Possible Contribution Of The Experimentalist Governance Approach, Muhammad Ahmad

World Maritime University Dissertations

No abstract provided.

Assessing Marpol Annex V Port Reception Facilities Of The National Port Of Liberia (Freeport Of Monrovia), Barbara Wade Cummings

World Maritime University Dissertations

No abstract provided.

Legal Analysis On The Use Of Maritime Drones In Law Enforcement Operations, Da Ye Kim

World Maritime University Dissertations

No abstract provided.

An Assessment Of The Impact Of Illegal Sand Mining On The Coastline Of Liberia, Alphena J. Logan

World Maritime University Dissertations

No abstract provided.

Strengthening Thailand’S Ship-Sourced Oil Spill Management : A Comparative Analysis Of Legal And Response Frameworks In Thailand, The United States, And Singapore, Supranee Wattanapongsakul

World Maritime University Dissertations

No abstract provided.

Development And Characterization Of Sustainable Aluminum Metal Matrix Composites With Date Palm Agro-Residues As Reinforcement, Ansar Kareem

Dissertations

Aluminum Matrix Composites (AMCs) are extensively used in various industrial applications owing to their exceptional mechanical, material, and tribological properties. This led to the development of AMCs with every possible aluminum alloy as matrix, incorporated with various reinforcement materials to achieve desired material properties. There has been an increasing trend in the utilization of agricultural and industrial waste products as reinforcement material in AMCs. Date palm trees produce huge quantity of agricultural waste in different forms. Usually, these wastes are burned or disposed of in landfills which cause environmental pollution. Date palm agro-wastes can be incinerated to produce date palm …

A Gas-Tight Bonding/Sealing Of Different Bulk Ceramics For Robust Oxygen Separation At Ultra-High Temperatures, Guoan Wang, Xingjian Xue

Faculty Publications

Oxygen transport membrane (OTM) is an economic technology for oxygen separation and high-purity oxygen production. To mitigate various issues induced by high temperatures, intermediate temperature OTM technology has been pursued in recent years. However, in certain circumstances, high operating temperatures are unavoidable, such as in situ oxygen production using OTMs for direct oxy-combustion. Nevertheless, the lack of reliable high temperature gas-tight sealing imposes great challenges on OTM technology for such applications. Herein, a novel sealing strategy is developed to obtain a gas-tight bonding/sealing of two different bulk ceramics using ceramic slurry in combination with phase inversion process. The sealing strategy …

Jet Impingement And Vortex/Swirl Cooling Of Different Inlet And Outlet Geometrical Configurations For Turbine Blade Leading Edge Cooling, Irfan Ahmad Sheikh

Thesis/ Dissertation Defenses

Gas turbine blades operate in extreme environments, exposed directly to high-temperature combustion gases that cause severe thermal stresses, weaken material integrity, and may lead to structural failure. Proper cooling is crucial to lower blade temperatures, reduce thermal stresses, prevent failure, and improve overall engine efficiency. This work presents a detailed numerical study of various cooling configurations by applying two advanced leading-edge cooling methods, jet impingement and swirl cooling, across different inlet mass flow rates and jet Reynolds numbers (Rej) ranging from 1,000 to 20,000 to evaluate their cooling performance.

Several advanced leading-edge cooling configurations are proposed and …

Hybrid Multi-Layer Sandwich Beams Using 3d Printing Technology With Energy Absorption Features, Hour Ali Alhefeiti

Thesis/ Dissertation Defenses

This study explores the use of additive manufacturing (AM) technology to create sandwich composite structures, focusing on the manufacturing process, testing, and anticipated impact. The rising cost of manufacturing prototypes using conventional methods has led to the exploration of 3D printing as a viable alternative. The research problem addresses the challenges in manufacturing sandwich composites and the need for automation across the civil, mechanical, aerospace, and aviation industries. The study aims to investigate 3D-printed sandwich composite structures and compare experimental, finite-element analysis, and theoretical results. The proposed methodology includes preparing a CAD model with five different core infill patterns (Cross …

Process-Driven Manufacturability Constraints In Design For Wire Arc Additive Manufacturing, Monsuru Ramoni, Sampson Gholston, Albert E. Patterson

Manufacturing & Industrial Engineering Faculty Publications

Wire arc additive manufacturing (WAAM) has emerged as a useful option for large-scale metal additive manufacturing. It has gained widespread use in the aerospace industry and other applications that require large and complex custom parts. The process is a combination of a precise control system and a welding process, typically GTAW or MIG welding. It is a member of the directed energy deposition (DED) family of AM processes. Compared with many metal AM processes, it is relatively simple and cost-effective but almost always requires a significant amount of postprocessing before parts can be used. The AM-based nature of the process …

Online Cyber-Physical Neural Network Model For Real-Time Hybrid Simulation, Faisal Nissar Malik, Liang Cao, James Ricles, Austin Downey

Faculty Publications

Real-time hybrid simulation (RTHS) is an experimental testing methodology that divides a structural system into an analyticaland an experimental substructure. The analytical substructure is modeled numerically, and the experimental substructure ismodeled physically in the laboratory. The two substructures are kinematically linked together at their interface degrees of freedom,and the coupled equations of motion are solved in real-time to obtain the response of the complete system. A key challenge inapplying RTHS to large or complex structures is the limited availability of physical devices, which makes it difficult to representall required experimental components simultaneously. The present study addresses this challenge by introducing …

Melamine-Based Polymer Nanofibers For Supercapacitors, Samar A. Salim, Hani Nasser Abdelhamid

Nanotechnology Research Centre

This investigation describes the synthesis, electrospinning, and characterization of melamine-glutaraldehyde (MAGA) polymer composites with polymethyl methacrylate (PMMA) for supercapacitors applications. Electrospun fibers are generated by combining the MAGA polymer with PMMA at varying concentrations (2.5 %, 5 %, and 10 wt%). The synthesis of the polymer, its morphological attributes, and structural features are validated by characterization methods e.g., XRD, TEM, SEM, and FT-IR. In a three-electrode configuration, the electrochemical performances of the prepared electrodes are assessed using cyclic voltammetry (CV), galvanostatic charge-discharge (GCDC), and linear sweep voltammetry (LSV). The results suggest that the 5 % MAGA-PMMA composite has a specific …

A New Low-Rate Stable Hydrogel Cathode For Aqueous Zn-Ion Batteries, Roya Rajabi, Shichen Sun, Jamil A. Khan, Morgan Stefik, Kevin Huang

Faculty Publications

Aqueous Zn-ion batteries (ZIBs) are attractive candidates for large-scale energy storage owing to the abundance, low cost, and intrinsic safety of Zn metal. However, their practical application is hindered by poor cycle stability, especially at low current densities, due to cathode dissolution and limited electrochemically active sites (EAS). Herein, a hydrogel-based cathode comprising ammonium vanadate, carbon black, and a Zn-ion-conducting carboxymethyl chitosan–acrylamide hydrogel matrix doped with Zn(ClO4)2 is reported. This design establishes a continuous Zn-ion-conducting network, thereby maximizing EAS density throughout the electrode volume. The ZIB with the hydrogel cathode exhibits outstanding cycling stability, with 77% capacity retention after 2000 …

Graphene Screen-Printed Electrode For Wound-Related Biosensing, Chanyapat Sriviroch

USF Tampa Graduate Theses and Dissertations

Monitoring wound healing is critical for improving patient outcomes, especially for chronic wounds, which often have complications like delayed healing and infections. Current methods for monitoring wound healing are invasive and costly. Also, these methods have a limited ability to provide real-time, continuous data. This study seeks to explore a graphene screen-printed electrode (SPE) electrochemical biosensor that is non-invasive and efficient to constantly monitor wound healing in real time. This research study focuses specifically on the electrochemical detection of the Human Neutrophil Elastase (HNE) and Secretory Leukocyte Protease Inhibitor (SLPI), which is one of the most abundant neutral proteinases in …

Al-Driven Interfacial Gap Prediction In Overlapped Al/Cu Laser Weld Joint For Battery Applications, Hyeonhee Kim, Sanghoon Kang, Cheolhee Kim, Yong Hoon Jang, Minjung Kang

Mechanical and Materials Engineering Faculty Publications and Presentations

The battery tab-to-busbar welding process forms the primary electrical path in battery packs and is directly linked to both performance and safety. Variations in jig alignment, material tolerance, and forming quality can cause small interfacial gaps that lead to weak welds. An artificial intelligence (AI)-driven method was proposed in this study for predicting interfacial gaps in aluminum-copper overlap joints by integrating deep learning with multi-sensor data. A charge-coupled device (CCD) camera, spectrometer, and optical coherence tomography (OCT) sensors were employed to develop and validate deep learning models under varying gap conditions. The results revealed that the variation in melt-pool dimensions, …

Characterizing Surface Waviness Of Aluminum Alloy: An Approach To Minimize Post-Processing In Wire Arc Additive Manufacturing (Waam) Production, Shammas Mahmood Shafi, Anis Fatima, Nicholas V. Hendrickson

Michigan Tech Publications

Wire Arc Additive Manufacturing (WAAM) offers high deposition rates and cost-effective production of large metal components but suffers from poor surface quality, particularly surface waviness, which increases post-processing requirements and limits industrial adoption. Since waviness directly impacts structural integrity, resource efficiency, and industrial applicability, understanding how process parameters govern this feature is critical for reducing post-processing requirement. This study systematically investigated the influence of voltage, travel speed, and wire feed speed on surface waviness in aluminum alloy walls fabricated by WAAM. A two-level factorial design with 16 experiments was conducted, and surface waviness was quantified using height gauge measurements relative …

Experimental Investigation Of 3d Printed Tpu Triboelectric Composites For Biomechanical Energy Conversion In Knee Implants, Osama Abdalla, Milad Azami, Amir Ameli, Emre Salman, Milutin Stanacevic, Ryan Willing, Shahrzad Towfighian

Mechanical Engineering Faculty Scholarship

Although total knee replacements have an insignificant impact on patients’ mobility and quality of life, real-time performance monitoring remains a challenge. Monitoring the load over time can improve surgery outcomes and early detection of mechanical imbalances. Triboelectric nanogenerators (TENGs) present a promising approach as a self-powered sensor for load monitoring in TKR. A TENG was fabricated with dielectric layers consisting of Kapton tape and 3D-printed thermoplastic polyurethane (TPU) matrix incorporating CNT and BTO fillers, separated by an air gap and sandwiched between two copper electrodes. The sensor performance was optimized by varying the concentrations of BTO and CNT to study …