Engineering Commons^™

Educational Programmes For Spatial Information Sciences In The Technological University Of Dublin, William Prendergast, Eamonn Murphy, Audrey Martin, Avril Behan

Conference papers

The ever increasing spatial information needs of society, the rapid development of new surveying technologies, and the global demand for appropriately qualified surveyors, have triggered a radical re-evaluation of geomatics education worldwide. Significant enhancements have been made to the educational programmes in the spatial information science discipline in the Technological University of Dublin’s (DIT) during the last decade including the provision of a BSc in Geomatics and various masters’ programmes to cater for the increasingly specialised needs of the Geographic Information sector in Ireland.

Development Of A Variable Stiffness Locally Adjustable And Repairable Low-Cost Energy Storage And Return Carbon Fiber Prosthetic Foot: A Feasibility Study, Joshua Scott Bowen

Open Access Theses & Dissertations

Background: Energy storage and return (ESAR) prosthetic feet were developed to improve the mobility and function of lower-limb amputees. Amputees in the Developing World amputees lack this technology. Most current Developing World prosthetic solutions do not adequately address the needs of active amputees and were not designed to pass international standard tests. Developing a low-cost, repairable, adjustable, energy storage and return prosthetic foot would close this technological gap and improve the mobility and function of active amputees. The goal of this research is to determine the feasibility of fabricating a low-cost, adjustable, ESAR, repairable prosthetic foot manufactured from carbon fiber …

Ole Miss Engineer 2013-2014

Ole Miss Engineer

No abstract provided.

Sodhana Environmental - Final Design Report, Eric Taylor, Corissa Bellis, Cody Perez, Cameron Zeller

Mechanical Engineering

A fully designed cost-effective, sustainable, toilet for the developing world.

Nineteenth Century North American And Pacific Tidal Data: Lost Or Just Forgotten?, Stefan A. Talke, David A. Jay

Civil and Environmental Engineering Faculty Publications and Presentations

Tide data are the oldest and longest oceanographic records and comprise one of the few tools for understanding, quantifying, and separating century-scale human and climate impacts on the coastal zone. Our archival research indicates that continuous measurements of tides began in 1844 in the western Atlantic, 1853 in the Eastern Pacific, and 1858 in the Western Pacific. At least 50 multiyear tide series existed by the year 1900. With few exceptions, however, these 19th and early 20th century measurements have not been analyzed in more than a century and have been forgotten and neglected by the scientific community. This article …

Multiscale Simulation Of Thermocline Energy Storage For Concentrating Solar Power, Scott Michael Flueckiger

Open Access Dissertations

Concentrating solar power (CSP) is a renewable and demonstrated technology for large-scale power generation but requires multiple engineering advancements to achieve grid parity with conventional fossil fuels. Part of this advancement includes novel and inexpensive thermal energy systems to decouple daily power production from intermittent solar collection. Dual-media thermocline tanks, composed of molten salt and solid rock filler, offer low-cost storage capability but the concept has experienced limited deployment in CSP plants due to unresolved concerns about long-term thermal and structural stability. The main objective of the present work is to advance the understanding of thermocline storage design and operation …

Development Of A Simple Manufacturing Process For A Prosthetic Leg, Kyle Smith, Dr. Mark Colton

Journal of Undergraduate Research

The purpose of this project was to develop a simple process to manufacture a useful and affordable prosthetic leg to be made available to below-the-knee amputees in a sub-Saharan African country. This project was motivated by a desire for learning and experience and also by humanitarian and social entrepreneurship ideals. The project was carried out as a joint effort by a larger research team composed of members of the BYU Biomedical Engineering Club. As this was a joint team effort, many of the tasks detailed in this report were shared between several team members. Currently, the team has identified partners …

Development Of A Simple Manufacturing Process For A Prosthetic Leg, John Christiansen, Dr. Mark Colton

Journal of Undergraduate Research

The purpose of this project was to develop a simple process to manufacture a useful and affordable prosthetic leg to be made available to below-­‐the-­‐knee amputees in a sub-­‐ Saharan African country. This project was motivated by a desire for learning and experience and also by humanitarian and social entrepreneurship ideals. The project was carried out as a joint effort by a larger research team composed of members of the BYU Biomedical Engineering Club. As this was a joint team effort, many of the tasks detailed in this report were shared between several team members. Currently, the team has identified …

Thermoelectric Cookstove, Christine Horman, Matthew Lee, Mark Wagner

Mechanical Engineering Senior Theses

A fuel efficient cookstove tailored to the needs of Nicaraguan small business owners that incorporated insulation and thermoelectric power generation was built and validated. There is a 4 inch layer of pumice rock insulation around the combustion chamber, which significantly reduces convective heat losses to the environment. The stove's ventilation system is powered by the electricity generated by thermoelectric generators. Preheated air is forced into the combustion chamber, which increases the combustion efficiency, reducing the fuel consumption and the harmful smoke produced. Through various testing methods, we found that the controlled airflow to the charcoal fuel allows the stove to …

Phase Change Material In Automated Window Shades, Quinlan Adler, Jake Gallau, Alexander Zatopa, Ali Nash

Mechanical Engineering Senior Theses

The purpose of this report is to detail the development process for a phase change material window shading system, which stores solar thermal energy and later releases it indoors to provide nighttime space heating. To do this, wax-filled louvers with thermally absorptive front faces were developed and outfitted with a control system, which utilized historical weather data to orient the louvers to specific solar azimuthal angles, thus maximizing the thermal absorption. The system was tested against other common window treatments in a pair of thermally comparable testing structures, and was found to provide energy savings as high as 50%.

Lunalight - Bringing Light To The Expanding World, Gabriela M. Igel, Daniel J. Patrick, Kimberley M. Smith

Materials Engineering

The LunaLight, a solar rechargeable light and cell phone charger, addresses the lack of access to electricity faced by 1.4 billion of the world’s population (International Finance Corporation). The LunaTech team has developed a product that is bright, simple, compact, versatile and competitive with existing products. Through a partnership with the non-profit organization One Million Lights, LunaTech has improved a previous team’s design to address user feedback, concerns of durability, and manufacturability.

The LunaLight design includes a 5 component plastic housing held together by 4 screws, a surface mounted PCB, a lithium-ion (Li-Ion) battery, one high-brightness LED, a solar panel, …

Me-Em Enewsbrief, June 2013, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Design Of Experimental Methods To Test The Performance Of Pads And Helmets Under Blast Loading Conditions, Kurtis Palu

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Improvised explosive devices (IEDs) have become a primary weapon in conflicts against US and allied forces. Improvements in body armor and medicine have increased the survivability of such events. These factors have caused an increase in traumatic brain injury (TBI) and mild traumatic brain injury (mTBI) induced by primary blast waves. Injury mechanisms caused from primary blast waves are not clearly understood or defined. How primary blast waves interact with materials or between narrow gaps found between helmet pads is not known. Two novel test fixtures were developed to provide a basic understanding of these two issues.

The first fixture …

A Methodology For The Extraction Of Design Principles For Unfamiliar Markets, Robert D. Campbell

Theses and Dissertations

Successful product design focuses on design principles that are relevant to a target market. Consequently, the better these principles are understood and used, the higher the likelihood that resulting products will be well-received in that market. This thesis presents a method for extracting market-specific design principles for any market. The method employs user/designer-described characteristics of products within a market to extract the design principles specific to that market. The method generalizes the product characteristics, seeks to discover design decisions that could have resulted in those characteristics, and then extracts the underlying design principles. To demonstrate the ability of the method …

Ocean Current Measurements: Challenges And Opportunities In The Florida Current, William E. Baxley

HCNSO Student Capstones

The water velocities offshore south Florida are dominated by the Florida Current, and these effects result not only from the tremendous flow of water between Florida and the Bahamas, but also from the eddies and other rotational components imparted by the change in flow direction from eastward to northward along the Florida Keys and the end of the peninsula. These currents have been measured for decades, with methods ranging from subsurface floats to acoustic Doppler current profilers (ADCPs) and surface current measuring radars. Data suggests that there is a large degree of variability in the mean flow, including significant vorticity …

2013 (Spring) Ensi Informer Magazine, Morehead State University. Engineering Sciences Department

ENSI Informer Magazine Archive

The ENSI Informer Magazine published in the spring of 2013.

Investigations Of Attitudes Towards Offshore Wind Farm Development In Ireland: Their Implication Towards Future Development Of The Industry., Aidan Melia

Purdue Polytechnic Masters Theses

This current research investigates what the attitudes of Irish people are towards the development of offshore wind farms in Ireland. Using a qualitative approach, a questionnaire is carefully designed and distributed among a sample population from three coastal communities. One is located on the west coast and two on the east coast. The two locations on the east coast have an involvement in offshore wind farms. One of the locations plays host to Ireland’s only offshore wind farm, while there are plans in place for an offshore wind farm at the other location. The results from the questionnaires are analyzed …

A New Class Of Solid Oxide Metal-Air Redox Batteries For Advanced Stationary Energy Storage, Xuan Zhao

Theses and Dissertations

Cost-effective and large-scale energy storage technologies are a key enabler of grid modernization. Among energy storage technologies currently being researched, developed and deployed, rechargeable batteries are unique and important that can offer a myriad of advantages over the conventional large scale siting- and geography- constrained pumped-hydro and compressed-air energy storage systems. However, current rechargeable batteries still need many breakthroughs in material optimization and system design to become commercially viable for stationary energy storage.

This PhD research project investigates the energy storage characteristics of a new class of rechargeable solid oxide metal-air redox batteries (SOMARBs) that combines a regenerative solid oxide …

Ole Miss Engineer 2012-2013

Ole Miss Engineer

No abstract provided.

Knowledge Dictionary For Information Extraction On The Arabic Text Data, Wahyu Syaifullah Jauharis Saputra, Agus Zainal Arifin, Anny Yuniarti

Makara Journal of Technology

Information extraction is an early stage of a process of textual data analysis. Information extraction is required to get information from textual data that can be used for process analysis, such as classification and categorization. A textual data is strongly influenced by the language. Arabic is gaining a significant attention in many studies because Arabic language is very different from others, and in contrast to other languages, tools and research on the Arabic language is still lacking. The information extracted using the knowledge dictionary is a concept of expression. A knowledge dictionary is usually constructed manually by an expert and …

Development Of A Supervisory Control Unit For A Series Plug-In Hybrid Electric Vehicle, Brian Neal Harries

Doctoral Dissertations and Master's Theses

A Series PHEV was chosen, as ERAU's entry into EcoCAR2 through a multidisciplinary architecture selection process. The series architecture was chosen for its mechanical feasibility, consumer acceptability and its performance on energy consumption simulations. The Series PHEV architecture was modeled using Matlab, Simulink, and dSPACE ASM tools, to create a plant model for controller development. A supervisory controller was developed to safely control the interactions between powertrain components. The supervisory control unit was tested using SIL and HIL methodologies. The supervisory controller was developed with an emphasis on fault detection and mitigation for safety critical systems. A power management control …

Absorber Geometry Optimization For A New Wave Energy Converter, Rachel A. Durren

Masters Theses

Alternative energy technologies are on the forefront of research due to the rising costs of oil and natural gas. One relatively under development source of energy is ocean waves. In order to make the use of ocean waves economically viable, the amount of energy absorbed by wave energy converters (WEC) must be optimized. The research within presents a new conceptual design, "Aqua Fly", for a WEC with emphasis on maximizing the amount of energy absorbed. The energy absorption component of the "Aqua Fly" was isolated and a small scale 2-D study of energy absorption. First, the amount of energy in …

A Method For Assessing The Sustainability Of Design In Developing World Projects, Adam Andersen

Master’s Theses

Projects for the developing world usually find themselves at the bottom of an engineer’s priority list. There is often very little engineering effort placed on creating new products for the poorest people in the world. This trend is beginning to change now as people begin to recognize the potential for these projects. Engineers are beginning to try and solve some of the direst issues in the developing world and many are having positive impacts. However, the conditions needed to support these projects can only be maintained in the short term. There is now a need for greater sustainability.

Sustainability has …

Lunalight Project: Solar-Rechargeable Led Lantern And Cell Phone Charger, Sean C. Dawson, Michael E. Deagen, Francisco N. Dye, Brian S. Mircheff, Ryan O. Ramelb

Materials Engineering

Today, 1.6 billion people in the world do not have access to grid electricity. Villagers living off the grid in developing nations resort to kerosene lanterns to light their homes. The fumes from burning kerosene are toxic and lead to respiratory illnesses over time. Our sponsor, OneMillionLights, plans to help people to escape poverty by providing them with a clean source of light at night. Children that must work in the fields during the day can use a solar-rechargeable lantern at night to read or study, and street vendors can use the lanterns at night to improve their businesses.

The …

Network-Based Data Collection For A Project-Based Freshman Class, Samuel Bogan Daniels, Cheryl Q. Li, David Harding

Mechanical and Industrial Engineering Faculty Publications

The hands-on experience for engineering students is often lacking with class sizes increasing and classroom resources under constant pressure. Even with smaller class sizes and studio classrooms there is only so much equipment and technical support to run experiments and allow for student interaction. Network-based data collection and control may alleviate some of these issues and allow for more hands-on experiences, although remote, in the classroom. This paper discusses the interesting problems and not so obvious pitfalls of setting up some simple network-based data acquisition systems for a multidisciplinary freshman level engineering course. The course as currently taught includes some …

Solar Powered Water Purification System, Alina Carlson, Reece Kiriu, Andrew Nosé, Christopher Sugii, Erin Taketa, Alex Tamai

Mechanical Engineering Senior Theses

Santa Clara University's 2011-2012 Solar-Powered Water Purification System team is developing a solution to create a water distillation system, heated by solar troughs and solely powered by photovoltaic (PV) panels that can produce clean, drinkable water. This device would balance cost and efficiency to be marketable to lower-income locations, such as developing countries that suffer from shortages of clean water. In accomplishing this, the team will ensure that the system is sustainable and requires minimal maintenance.

Section 4: Energy Generation & Conversion, Asme Ectc Coordinating Committee

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 137-194

Comparison Of Rechargeable Battery Technologies, Melissa Morris, Sabri Tonsunoglu

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

Section 4: Energy Generation & Conversion; pp. 148-155

Dolphin Sound Production And Distribution On The West Florida Shelf, Peter Simard

USF Tampa Graduate Theses and Dissertations

This dissertation is an investigation of dolphin sound production and distribution off west central Florida. Although a wealth of information exists on the production of common sounds (whistles, echolocation) made by captive, trained dolphins, far less is known about free-ranging dolphin sound production and of unusual sounds. In addition, while inshore dolphin populations or communities are the subjects of research projects in many locations, dolphins in offshore waters are less commonly studied. The objectives of this dissertation were to contribute information on free-ranging dolphin sounds and continental shelf dolphin distribution.

While echolocation has been rigorously studied in captive, trained dolphins, …

Investigation On A Gas-Solid Fluidized Bed Hydrodynamics Using A Non-Intrusive Technology To Visualize Flow Field, Md Rashedul Hasan Sarker

Open Access Theses & Dissertations

The biggest challenge for 21st century is to fulfill global energy demand and at the same time reduce detrimental impact on environment. Gasification technology can meet the requirement and also reduce emission without compromising its performance. In coal gasification, instead of burning coal completely a partial combustion takes place with presence of steam and limited amount of oxygen. In this controlled environment a chemical reaction takes place and produces a mixture of clean synthetic gas. Gas-solid fluidized bed is one type of gasification technology. During gasification mixing behavior of solid (coal) and gas and their flow pattern very complicated to …