Investigation Of Exothermic Reaction Dynamics Via Computational Fluid Dynamics Coupled With A Feedback Controller, Siusan Choi

Mechanical and Aerospace Engineering Dissertations - Archive

The control of reaction temperature under continuous flow conditions is important in a variety of chemical manufacturing industries. For many reactions, operating at off-design temperatures can result in the production of undesired products, reduced feedstock conversion and, in some cases, reduced catalyst lifetime. In many exothermic reactions, maintaining a desired set point temperature at high reactant flow rates becomes challenging if the chemical kinetics exhibit highly non-linear behavior. In these situations, the interaction between commonly used linear controllers and the physical system can lead to unexpected dynamic response and undesired swings in reaction temperature. In this research, a computational model …

Advanced Technologies For Sustainable Systems, Hesham Safwat

Mechanical Engineering

No abstract provided.

Heat Pipe Design For Absorption Chiller Refrigerators Powered By Cookstoves, Paola Flores, Eduardo Melendez

Mechanical Engineering Senior Theses

We developed an inexpensive refrigeration system that will operate off-grid through the use of reclaimed heat from cookstoves. The refrigerator will serve as a reliable storage unit that will maintain vaccines at a proper temperature range. This report focuses on the various components that make up our Cool Stove project. The overall system and subsystems are laid out and explained. We also address the reason why we believe this project will be beneficial to individuals in developing countries. In addition, we provide detail on the work that we have accomplished and on the results that we have achieved. We created …

Microfluidic E. Coli Detection, Kyle Pietrzyk, Scott Fukuoka, Andres Maldonado-Liu, Andy Ly

Interdisciplinary Design Senior Theses

In both developed and developing countries, there is a need for a fast diagnostic system to detect pathogens within a fluid sample. In developing a microfluidic platform, which utilizes a microfluidic chip and an optical detection method, doors may be opened for new methods of determining pathogen concentration in fluid. Most biological reactions are not instantaneous. A flow-controlling mechanism with no power requirement may be implemented in the microfluidic platform. As a proof-of-concept, our device uses a microfluidic chip, smartphone, and microlens to detect E. coli concentrations in water. The detection method is based on the latex agglutination assay which …

Harvesting Of Water From Fog Using Sponges, Jae Jun Lee

Mechanical and Aerospace Engineering Theses - Archive

Supervising Professor: Cheng Luo A sponge has porous structures. It is capable of both storing and transmitting water. In this work, we explored the possibility of applying three different types of sponges to collect fog. We also compared their fog-collection efficiencies with that of a typical Raschel mesh that is widely used in the field to collect fog. We found that, for three different fog speeds, the fog-collection efficiencies of three tested sponges were 39% to 93% those of the typical Raschel mesh, indicating that the sponges could serve as alternative fog collectors when well-developed collectors were not available. Sponge …

Transportation And Power Solutions For Africa: The Assessment And Optimization Of The Purdue Utility Platform, Jeremy Patrick Robison

Open Access Theses

The Purdue Utility Platform (PUP) is an off-road utility vehicle that was created to improve agricultural productivity in sub-Saharan Africa by providing appropriate transportation and mobile power solutions. The vehicle design has matured to a level where it now requires more robust engineering tools to perform a rigorous assessment of its function. The assessment will be pursued in two areas: durability of the frame and the roll stability of the vehicle. To assess the durability of the frame, a data acquisition system was installed to collect strain gauge information during the vehicle’s operation. This data was then related to an …

Development Of Distributed Off-Grid Renewable Energy System For Rural African Communities, Mateo Sebastian Guerrero, Menghong Feng

Engagement & Service-Learning Summit

Our Hybrid Energy System team is committed to develop low-cost renewable energy solutions to rural African communities where access to electricity from government grid is not available. According to a World Bank’s report, only 24% of sub-Saharan countries have access to electricity. Our team has been working with local partners to build renewable energy systems since 2008. From 2015 the team has been working on micro hydropower turbine and vertical-axis wind turbine with solar energy system combined. Our current efforts include a prototype design of a wind-solar system, using a new concept of vertical axis wind turbine to harvest wind …

A Techno-Economic Analysis Of Wind Generation In Conjunction With Compressed Air Energy In The Integrated Single Electricity Market., Brendan Cleary

Doctoral

The Integrated Single Electricity Market (I-SEM) is the proposed wholesale electricity market for Ireland and it is intended to replace the current Single Electricity Market (SEM) by 2018. Subsequently, substantial modifications will be required to the SEM and this has led to significant uncertainty for stakeholders. The SEM currently features no forecast risk for renewables such as wind and there is no concept of balance responsibility. Under the I-SEM, wind generation will be exposed to forecast risk and the requirement to be balance responsible. The use of Compressed Air Energy Storage (CAES) could represent a better system configuration which would …

Design And Optimization Of Lithium Ion Battery For High Temperature Applications, Khalid Abdullitife Ababtain

Wayne State University Dissertations

With massive commercial success of lithium ion batteries, the ability to operate at

and above 70 °C still a crucial issue and a safety concern to combat ever-increasing

global warming and to extend applications beyond portable electronics. Among various

components of battery, anode and electrolyte and the passivation layer formed between

them is crucial towards the development of Li-ion batteries for extendable temperature

range. In this regard, room temperature ionic liquids (RTILs) have the capability to

tackle thermal stability issues of lithium ion batteries but their poor compatibility with

traditional graphite anodes limits their practical application. Towards addressing this

issue, …

Comparison Of Ignition Delays And Liquid Penetrations Of Jp-8, Synthetic Jp-8, And A Jp-8 Surrogate Under Diesel Engine Conditions, Kyle Yeakle

Dissertations, Master's Theses and Master's Reports

The U.S. Army and many NATO affiliates have adopted a ‘one fuel forward fuel policy’ (OFF). The goal of the OFF policy is reducing the logistics and cost involved with providing fuel for military vehicles. With this policy, the logical choice fuel is military grade jet petroleum, JP-8, because of the fuel constraints of turbo-jet engines. This requirement has made it necessary to run military compression ignited engines on JP-8. To reduce the Army’s reliance on petroleum based fuels an alternative fuel, synthetic JP-8, derived from coal and made in the Fischer-Tropsch production method is allowed to be blended up …

Economical Retrofit System To Reduce Cooking Emissions In Third World Dwellings, Jonathan Vanzummeren, Tyler Sturgeon, Ben Dalessandro

Williams Honors College, Honors Research Projects

Abstract:

The purpose of this document is to propose and demonstrate the feasibility and effectiveness of substituting an open flame biomass cooking process with a closed system with the capabilities of sustaining an adequate fire. Clay ovens or “chulhas” are the traditional piece of cooking equipment used in poorer areas of the world. They are often built inside cramped one-room housing units with little or no ventilation. The emissions released from burning fuel sources such as wood, coal, or animal waste bring with them detrimental and often fatal health problems and results in approximately 1.3 million deaths per year.

The …

A Biomimetic, Energy-Harvesting, Obstacle-Avoiding, Path-Planning Algorithm For Uavs, Snorri Gudmundsson

Doctoral Dissertations and Master's Theses

This dissertation presents two new approaches to energy harvesting for Unmanned Aerial Vehicles (UAV). One method is based on the Potential Flow Method (PFM); the other method seeds a wind-field map based on updraft peak analysis and then applies a variant of the Bellman-Ford algorithm to find the minimum-cost path. Both methods are enhanced by taking into account the performance characteristics of the aircraft using advanced performance theory. The combined approach yields five possible trajectories from which the one with the minimum energy cost is selected. The dissertation concludes by using the developed theory and modeling tools to simulate the …

Comparative Analysis Of Locally Available Materials For Treadle Pump Seals In Senegal, West Africa, Brennan Tymrak

Dissertations, Master's Theses and Master's Reports

For rural farmers in Senegal, West Africa, pulling water for irrigation can be a laborious but necessary task during the dry season to earn income from vegetable gardening. Traditional water pulling methods are inexpensive but require great physical effort, while modern machines decrease the labor burden but at a high financial cost. This study looked at an intermediate water pulling technology, the treadle pump, and how it could be improved to become more desirable for use in agricultural irrigation. A treadle pump was built and tested during field work in a rural Senegalese village. Observations from field testing prompted a …

Electromechanics Of An Ocean Current Turbine, Vasileios Tzelepis

LSU New Orleans Theses and Dissertations

The development of a numeric simulation for predicting the performance of an Ocean Current Energy Conversion System is presented in this thesis along with a control system development using a PID controller for the achievement of specified rotational velocity set-points. In the beginning, this numeric model is implemented in MATLAB/Simulink® and it is used to predict the performance of a three phase squirrel single-cage type induction motor/generator in two different cases. The first case is a small 3 meter rotor diameter, 20 kW ocean current turbine with fixed pitch blades, and the second case a 20 …

A Multiphysics Modeling Of Solid Oxide Metal-Air Redox Battery, Md Ahsan Uddin

Theses and Dissertations

Cost-effective and large scale energy storage is essential for the growth of the future’s ‘‘green energy’’ infrastructure. Among the energy storage technologies currently being used, rechargeable batteries represent a class of advanced electrical energy storage (EES) mechanisms that can be valuable for the future renewable integration and smart grid. Rechargeable batteries have innumerous advantages over the conventional pumped hydro and compressed-air energy storage system. Now days, There are various types of rechargeable batteries available to work as an energy storage device in a smart grid but it still needs many breakthroughs to become commercially viable for stationary energy storage. First …

College Of Engineering Senior Design Competition Fall 2015, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …

Ole Miss Engineer 2015-2016

Ole Miss Engineer

No abstract provided.

Designing, Building And Testing A Solar Thermoelectric Generation, Steg, For Energy Delivery To Remote Residential Areas In Developing Regions, Yacouba Moumouni

UNLV Theses, Dissertations, Professional Papers, and Capstones

New alternatives and inventive renewable energy techniques which encompass both generation and power management solutions are fundamental for meeting remote residential energy supply and demand today, especially if the grid is quasi-inexistent. Solar thermoelectric generators can be a cost-effective alternative to photovoltaics for a remote residential household power supply. A complete solar thermoelectric energy harvesting system is presented for energy delivery to remote residential areas in developing regions. To this end, the entire system was built, modeled, and then validated with LTspice simulator software via thermal-to-electrical analogy schemes. Valuable data in conjunction with two novel LTspice circuits were obtained, showing …

Design, Fabrication And Analysis Of A Paver Machine Push Bar Mechanism, Mahendra Palnati

USF Tampa Graduate Theses and Dissertations

Now-a-days, the major challenge that’s being faced by the concrete industry is the cleaning of concrete handling equipment. Concrete consists of aggregates, which harden with time, and the transportation of concrete mixture within the plant is a significant problem. This will not only increase the overall maintenance cost, but will lead to loss of raw materials, affect the rate of production, and reduce the lifetime of concrete handling equipment.

The present study focuses on the design and implementation of an adaptive cleaning mechanism in the concrete industry and its importance in achieving efficient cleaning, which is tested to verify its …

Metal Hydride Component Design (Mhy-Code) Tool For The Selection Of Hydrides In Thermal Systems, Essene L. Waters, Timothée L. Pourpoint, Tyler G. Voskuilen

International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES)

A system has been developed to enable the targeted down-selection of an extensive database of metal hydrides to identify the most promising materials for use in thermal systems. The materials’ database contains over 300 metal hydrides with various physical and thermodynamic properties included for each material. Submodels for equilibrium pressure, thermophysical data, and default properties are used to predict the behavior of each material within the given system. The application used at this time is a stationary combined heat and power system containing a hightemperature proton exchange membrane (PEM) fuel cell, a hot water tank, and two metal hydride beds …

Sae Baja Dynamic Loading, Ryan Flatland, Christian George, Nick Bonafede

Mechanical Engineering

Cal Poly’s SAE Baja team undertook a project to measure the loads applied to an offroad buggy via the ground, including any obstacles. Originally, the ground loads pertaining to suspension, drivetrain, and chassis were based on rough estimates and historical part failures. This led to large safety factors, overbuilt parts, unknown part life, and improperly designed points of failure. In order for the team’s designs to advance to the next level of competition, an accurate set of loading cases were required. The main focus of the project was the suspension loads measured with strain gauges and a shock potentiometer, however …

Transmission Electron Microscopy Characterization Of High-Temperatur Oxidation Of Fe-20cr-5al Alloy Prepared By Focused Ion Beam Technique, Mohammad Dani, Pudji Untoro, Teguh Yulius Surya Panca Putra, Parikin Parikin, Joachim Mayer, Arbi Dimyati

Makara Journal of Technology

The Focused Ion Beam (FIB) technique was applied for cross section preparation of the oxidized alloy for Transmission Electron Microscopy (TEM) study. Prior to preparation, the specimens of Fe-20Cr-5Al alloy sheet were oxidized in air at 1200 oC for 2 minutes, 10 minutes, 2 hours, and 100 hours. The microstructure and elemental composition of the samples were characterized using TEM equipped with an Energy Dispersive X-Ray Spectroscopy (EDX). The Electron Energy Loss Spectroscopy (EELS) was used to determine of the light elements. The TEM investigation reveals remarkable microstructure evolution of the specimens during oxidation which generally exhibit a typical multi-layer …

Modeling Radiation Heat Transfer For Building’S Cooling And Heating Loads: Considering The Role Of Clear, Cloudy, And Dusty Conditions In Hot And Dry Climates, Salem Ahmed Algarni

Graduate Theses and Dissertations

The influence of transient factors such as sky long wave radiation exchange and atmospheric aerosols (i.e., smog, and dust – made up of sand, clay, and silt) are not carefully considered in current building design and simulation models. Therefore, the research objective was to better understand and account for such variables, resulting in improved radiative predictive capabilities, especially important for hot and dry climates under different sky conditions including clean, cloudy, and dusty. Overall, results of this dissertation provided a better prediction method for sky long wave radiation exchange with a building’s roof and the impact of dust accumulation on …

Skyport: Payload: Medical Cooler For The Skyport Uav, Madison Gee, Hector Lopez, Victor Magaña

Mechanical Engineering Senior Theses

Access to basic healthcare is a major persisting problem around the globe, especially in rural parts of the world. One of the many facets of this problem is access to vaccine treatment. The transportation and storage of vaccines at the proper temperature is an issue that is still being solved and improved upon today. One of the common solutions to this problem is the use of passive coolers such as ice packs and other refrigerants. The potential issue with passive cooling is that the temperature cannot be actively controlled. This is evident, as many vaccines are wasted due to incorrect …

Skyport Airframe: Design And Manufacturing, Thomas Clark, Michael Dewane, Siosiua Faleta, Robert Llanos-Hinson

Mechanical Engineering Senior Theses

Many rural areas of developing countries lack the necessary transportation infrastructure to have reliable access to basic needs. This is particularly true for medical supplies. To combat the issue of insufficient access to vaccines in developing areas, the SkyPort project has developed the SkyPort UAV (Unmanned Aerial Vehicle). The SkyPort UAV has the vertical takeoff and landing (VTOL) capabilities of a quadcopter, as well as the efficient, sustained flight of a fixed-wing aircraft. It provides a cheaper, quicker, and safer delivery method than existing alternatives for vaccines in areas that lack a reliable transportation infrastructure. The role of the SkyPort …

Uavino, Matthew Belesiu, Aaron Chung, Kirby Linvill, Nathan Carlson, Phillip Coyle, Megan Peekema

Interdisciplinary Design Senior Theses

UAVino is a drone solution that uses aerial imagery to determine the overall plant health and water content of vineyards. In general, the system focuses on automating crop inspection by taking aerial imagery of a vineyard, conducting post-processing, and outputting an easily interpreted map of the vineyard's overall health. The project's key innovation is an auto-docking system that allows the drone to automatically return to its launch point and recharge in order to extend mission duration. Long term, UAVino is envisioned as a multi-year, interdisciplinary project involving both the Santa Clara University Robotics Systems Laboratory and local wineries in order …

Database Design For The Collection And Visualization Of Sustainabilty Data, Henry A. Kozlowski, Nikhila Perugupalli

Industrial and Manufacturing Engineering

The goal of the project was to create a database that would be a repository for the high volume of sustainability data Illumina would like to collect. To couple with the database the project team’s goal was to design a system for visualizing the data graphically. Illumina required a database system that would be user-friendly, easy to add, delete, and edit data inputs, as well as a program that would allow the user to easily sort and graph data. The intent of the graphical representation of the data is to publish the graphs in a monthly report that would be …

Designing A Supply Chain For Wine Imports, Italy To California, Neil Magnuson, Sam Bucher

Industrial and Manufacturing Engineering

Executive Summary

In this report a framework for a hypothetical business will be covered. Bucher & Magnuson Wine Import Inc. has provided a business plan as well as a detailed supply chain design for operations. In addition, a model for scaling and a redesign of a possible storage facility will be found. This comprehensive document outlines end to end the supply chain model of the hypothetical business and moreover a framework for starting a wine import business in San Luis Obispo.

The conclusions of the results from this model are the following:

• Unconcerned with time, the cheapest route for 1 …

  ---

  Go to article

Veloelectric: Creating A Device That Harvests Energy From Bicycles, Austin Hall, Daniel Stohr, Tj Fox

Mechanical Engineering

Long distance mountain bikers, bike-packers, and many bikers in developing countries rely on electrical devices for safety and communication. These specific groups of people operate in areas with little to no electricity, and often times have no power to sustain their devices. The purpose of this Cal Poly senior project, VeloElectric, was to design, build, and test a kinetic energy harvester for bicycles that can be used to charge common mobile devices via USB. This senior project team created a device that attaches directly to a bicycle and uses vibrations to generate energy, which in turn powers a variety of …

Methods Of Processing Kenaf Chopped Strand Mats For Manufacturing Test Specimens And Composite Structures, Joshua W. Heil

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Every year in the United States, 10 to 11 million vehicles reach the end of their life cycle. Nearly all of these go to a recycling facility. After the recycling process is complete an average of 25% of each vehicle, by weight, goes to waste. This demonstrates the need to use natural fibers in parts that could be recycled, like parts that can be made from kenaf. There are many reasons to consider using natural/bio-fiber composites (bio-composites). These reasons include human health and environmental factors as well as advantages that natural fibers have over fiberglass, such as: lower costs and …