Engineering Commons^™

A Field Investigation Of Composite Mud Brick Compressive Strength, Kevin D. Hale

Dissertations, Master's Theses and Master's Reports - Open

It has been highlighted in numerous publications that in the field of earth construction there is a strong disconnect between experimental work in the laboratory and its application in the field. The current study attempts to help bridge this gap with a field test conducted in Nampula, Mozambique. Mud bricks were made with a simple hand mold and reinforced with bamboo and straw fibers. Fibers were cut into lengths of 3 cm and 6 cm while being mixed in fractions of 0.125%, 0.25% and 0.50% by weight and compressive strength was measured using an application of the 3-point bending test. …

Shotcrete Education And Nozzlemen Certification In North America, Marc Jolin, J. Nehasil, C. Hanskat

Shotcrete for Underground Support XII

No abstract provided.

Beautiful Forms And Compositions Are Not Made By Chance: Exploring The Efficacy Of Portable X-Ray Fluorescence To Sort And Source English Lead Glazed Ceramics, Steven J. Sarich

Dissertations, Master's Theses and Master's Reports - Open

Advances in portable X-ray fluorescence (pXRF) technology have made it a viable option for the non-destructive exploration of the underlying chemical composition of ceramic artifacts for the purposes of classification. However, because the literature regarding the use of this instrument on historic artifacts is limited, it is necessary to begin with a broad scale exploratory assessment that might act as a jumping off point for future studies on this topic. Toward that end, this research uses a collection of British and Continental European ceramics ranging from 1650-1920, owned and curated by the Chipstone Foundation in Fox Point, WI, to explore …

Quality Control For Wet-Mix Fiber Reinforced Shotcrete In Ground Support, Lihe (John) Zhang, Dudley R. Morgan

Shotcrete for Underground Support XII

No abstract provided.

Sustainable Disposal Of Coal Processing Waste Streams, Mohammad Rezaee

Theses and Dissertations--Mining Engineering

Modern coal preparation facilities incorporate a wide array of solid-solid and solid-liquid separation processes for rejecting mineral matter to meet market specifications. The coarse mineral matter is typically placed into engineered refuse piles whereas the fine refuse is either stored in impoundments or co-disposed with the coarse refuse. The discharge water from the refuse material represents an environmental concern due to the potential release of trace elements, and the subsequent elevation of total dissolved solids and conductivity. The research findings reported in this dissertation addresses sustainable coal processing waste disposal through using strategies aimed at minimizing the environmental impacts. To …

Influence Of Spatial Variations Of Railroad Track Stiffness And Material Inclusions On Fatigue Life, Celestin Nkundineza

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Railroad transportation is very important for economic growth and effective maintenance is one critical factor for its economic sustainability. The high repetitive forces from a moving railcar induce cyclic stresses that lead to rail bending and potential deterioration due to fatigue crack initiation and propagation. Previous research for prediction of fatigue life has been done under the assumptions of a uniform track bed and a homogeneous rail. However the spatial variation of the track stiffness is expected to increase the maximum stresses in the rail and, therefore, accelerate the fatigue process. The research described in this dissertation is focused on …

Transport Properties Of Wet-Mix Shotcrete, Lihe (John) Zhang, Dudley R. Morgan

Shotcrete for Underground Support XII

No abstract provided.

Preliminary Investigation Into The Cause Of Pinhole Porosity In Aluminum Metal Castings From Serpentine Impurities In Olivine Sand, Brodie J. Biersner

Dissertations and Theses @ UNI

The problem addressed in this study is how contaminates in the foundry molding aggregate olivine, affect aluminum castings during the casting process. This research will concentrate on hydrated contaminates, specifically the mineral serpentine. The purpose of this research is to better understand how hydrated minerals contribute to the generation of pinhole porosity defects during the casting process. Understanding how impurities in foundry aggregates affect the casting process would aid in the reduction of scrap caused by core and molding sands, ultimately providing savings to the casting manufacturer.

A foundry grade olivine was compared to a new source of olivine to …

A Collagen‐Glycosaminoglycan‐Fibrin Scaffold For Heart Valve Tissue Engineering Applications, Claire Brougham, Stefan Jockenhoevel, Thomas Flanagan, Fergal O'Brien

Conference Papers

The field of heart valve biology and tissue engineering a heart valve continue to expand. The presentatio ns at this meeting reflect the advances made in both areas due to the multi-disciplinary approach taken by many laboratories.

In Vitro Assessment Of Laser Sintered Bioactive Glass Scaffolds With Different Pore Geometries, Krishna C. R. Kolan, Albin Thomas, Ming-Chuan Leu, Greg Hilmas

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The pore geometry of bioactive glass scaffolds intended for use in bone repair or replacement is one of the most important parameters that could determine the rate of bone regeneration. The pore geometry would also affect the mechanical properties of the scaffolds and their rate of degradation. Scaffolds with five different architectures, having ~50% porosity, were fabricated with silicate (13–93) and borate (13–93B3) based bioactive glasses using a laser sintering process. An established, late-osteoblasts/early-osteocytes cell line was used to perform cell proliferation tests on the scaffolds. The results indicated that the cells proliferate significantly more on the scaffolds which mimic …

Durability Of Silane Sealer In A Highly Alkaline Environment, Cameron David Murray

Graduate Theses and Dissertations

Alkali-silica reaction (ASR) is a chemical reaction between siliceous minerals present in certain aggregates and alkalis in the concrete pore solution. The reaction can lead to expansion and severe damage in concrete members. One method to mitigate ASR expansion is to use a penetrating sealer such as silane. A set of columns located in a food preparation facility was treated with silane and a complimentary laboratory study was performed. A cleaning regimen involving application of an alkaline cleaner is employed at the facility, followed by rinsing with hot, pressurized water. The purpose of this research is to evaluate the effectiveness …

A Model For Magnetic Drug Targeting In A Permeable Microvessel With Spherical Porous Carrier Particles, Precious Sibanda, Sachin Shaw

5th International Conference on Porous Media and Their Applications in Science, Engineering and Industry

We present a mathematical model for targeting a drug at malignant tissue cells in a permeable microvessel. The drug molecules are transported in carrier particles which are assumed to be porous spheres. This mode of drug delivery is non-invasive and has less toxic effects on healthy cells and tissues. The microvessel tube (see Figure 1) is subdivided into three regions, the outer endothelial glycocalyx layer where the blood has a Newtonian character, and a core and plug regions where the blood flow is described using a non-Newtonian Casson fluid model which is suitable for microvessels of radius 5mμ. Targeting is …

Comparative Analysis Of Geometric Models For Predicting The Dynamic Specific Surface Of Foamlike Media, Sonia Woudberg, Francois Smit

5th International Conference on Porous Media and Their Applications in Science, Engineering and Industry

An adaptable geometric pore-scale model is proposed for predicting the specific surface area of actual foams. The proposed model, based on rectangular geometry, is compared to a cubic unit cell model from the literature based on cylindrical struts, a tetrakaidecahedron model as well as a dodecahedron model (both based on either cylindrical of triangular struts). The predicted specific surface areas of the proposed model are of the same order of magnitude as the other model predictions from the literature. The relative percentage errors in the predicted values are at most equal to the relative percentage errors associated with the measured …

Program, Engineering Conferences International

5th International Conference on Porous Media and Their Applications in Science, Engineering and Industry

No abstract provided.

A Novel Silica-Based Nano Pigment As A Titanium Dioxide Replacement, Ryan Stoneburner

Masters Theses

This research focused on the evaluation of a new Silica-based pigment for the replacement of titanium dioxide (TiO₂) in paperboard coatings. The silica-based pigment has shown the ability to be a replacement in terms of functionality and runnability. TiO₂ is currently the highest opacifying pigment used in paper coatings, but it is also the most costly. Finding a less expensive pigment that doesn't reduce effectiveness is critical to reducing the cost of TiO₂ formulations. To evaluate the new pigment, coatings will be applied using a Cylindrical Laboratory Coater (CLC) with varying amounts of TiO₂ and …

The Effect Of Clay, Cement And Fibers On The Strength And Durability Of Compressed Earth Blocks, Wyatt Adair Banker-Hix

Master's Theses

This Thesis examines the effect of soil characteristics, cement content and fibers on the strength and durability of compressed earth blocks (CEBs). This work expands on the available information regarding the constituent properties which affect the compressive and tensile strengths and durability of CEBs. Additionally, little research on the subject of synthetic fibers and their effect on strength and durability of CEBs is available and this work provides an initial study in this area.

To study the effects of fibers, as well as confirm the trends of previous research regarding the effects of clay and cement, 27 unique batches of …

Addressing Public Health Risks Of Persistent Pollutants Through Nutritional Modulation And Biomimetic Nanocomposite Remediation Platforms, Bradley J. Newsome

Theses and Dissertations--Chemistry

Due to their relative chemical stability and ubiquity in the environment, chlorinated organic contaminants such as polychlorinated biphenyls (PCBs) pose significant health risks and enduring remediation challenges. Engineered nanoparticles (NPs) provide a novel platform for sensing/remediation of these toxicants, in addition to the growing use of NPs in many industrial and biomedical applications, but there remains concern for their potential long-term health effects. Research highlighted herein also represents a transdisciplinary approach to address human health challenges associated with exposure to PCBs and NPs. The objectives of this dissertation research are two-fold, 1) to develop effective methods for capture/sensing and remediation …

Alkali Promoted Molybdenum (Iv) Sulfide Based Catalysts, Development And Characterization For Alcohol Synthesis From Carbon Monoxide And Hydrogen, Belinda Delilah Molina

Open Access Theses & Dissertations

For more than a century transition metal sulfides (TMS) have been the anchor of hydro-processing fuels and upgrading bitumen and coal in refineries worldwide. As oil supplies dwindle and environmental laws become more stringent, there is a greater need for cleaner alternative fuels and/or synthetic fuels. The depletion of oil reserves and a rapidly increasing energy demand worldwide, together with the interest to reduce dependence on foreign oil makes alcohol production for fuels and chemicals via the Fischer Tropsch synthesis (FTS) very attractive. The original Fischer-Tropsch (FT) reaction is the heart of all gas-to-liquid technologies; it creates higher alcohols and …

Improved Deinkability Of Lep (Liquid Electrophotography) Digital Prints, Zheng Wei

Masters Theses

Digital printing plays a very important role in the life of modern society. With the development of digital printing technologies, and the increasing market share of digital printing, the amount of digital prints in waste paper is rapidly increasing. Under “green” manufacturing and environmental sustainability, deinking of digital print inks is an urgent problem that needs to be solved. Indigo is a typical series of HP (Hewlett-Packard) digital presses that use a liquid ink named ElectroInk (Liquid Electrophotography or LEP). The particle size of HP ElectroInk is very small, 1-2 microns, which is smaller than dry toners. But, during flotation, …

New Approaches On Deinking Evaluations, Roland Gong

Dissertations

Paper recycling in the U.S. is the most successful program of environmental sustainability. Approximately two thirds of consumed paper products were recycled, according to the EPA and AF&PA. However, domestic mills only applied one third of recycled fibers into new products, which is much lower than reported in China (67%). The domestic recycle mills claimed that outdated facilities, poor recycled fiber quality and high manufacturing cost are the major issues. They also said that these recycle mills have been put in a “no-win” position, which threatens the whole recycling loop eventually. A case study about Chinese recycle mills has been …

Lunalight - Bringing Light To The Expanding World, Gabriela M. Igel, Daniel J. Patrick, Kimberley M. Smith

Materials Engineering

The LunaLight, a solar rechargeable light and cell phone charger, addresses the lack of access to electricity faced by 1.4 billion of the world’s population (International Finance Corporation). The LunaTech team has developed a product that is bright, simple, compact, versatile and competitive with existing products. Through a partnership with the non-profit organization One Million Lights, LunaTech has improved a previous team’s design to address user feedback, concerns of durability, and manufacturability.

The LunaLight design includes a 5 component plastic housing held together by 4 screws, a surface mounted PCB, a lithium-ion (Li-Ion) battery, one high-brightness LED, a solar panel, …

Full Depth Reclamation: Bringing Developing Countries' Transportation Up To Speed, Sadie Smith

Civil Engineering Undergraduate Honors Theses

Often, a direct correlation is observed between a country’s transportation network and economic development. Evidence of this is observed all over the world. Full Depth Reclamation (FDR) is a roadway recycling technique that mills and mixes the existing roadway with a stabilizing agent and then re-compacts the mixture to create a thicker, stabilized pavement layer. This method is both cost effective and environmentally friendly, making it a very appealing option as the need to rehabilitate or increase the structural capacity of existing roads grows. In this study, the material characterization of FDR was examined as a composite material of both …

Sci-Tech Book News Reviews, Susan Fingerman

Sci-Tech News

No abstract provided.

Photovoltaic Industry & Role Of Glass For Reducing The Cost Of Solar Energy, Sener Oktik

Functional Glasses: Properties And Applications for Energy and Information

No abstract provided.

Alterations Of Glass Surfaces & Functional Coatings For Energy Conversion Systems, Joachim Deubener

Functional Glasses: Properties And Applications for Energy and Information

No abstract provided.

Green Diesel Production Via Catalytic Hydrogenation/Decarboxylation Of Triglycerides And Fatty Acids Of Vegetable Oil And Brown Grease, Elvan Sari

Wayne State University Dissertations

Increase in the petroleum prices, projected increases in the world’s energy demand and environmental awareness have shifted the research interest to the alternative fuel technologies. In particular, green diesel, vegetable oil/animal fat/waste oil and grease derived hydrocarbons in diesel boiling range, has become an attractive alternative to biodiesel— a mixture of fatty acid methyl esters, particularly due to its superior fuel properties that are similar to petroleum diesel. Hence, green diesel can be used as a drop-in fuel in the current diesel engines. The current technology for production of green diesel– hydrodeoxygenation of triglycerides and fatty acids over conventional hydrotreating …

Knowledge Dictionary For Information Extraction On The Arabic Text Data, Wahyu Syaifullah Jauharis Saputra, Agus Zainal Arifin, Anny Yuniarti

Makara Journal of Technology

Information extraction is an early stage of a process of textual data analysis. Information extraction is required to get information from textual data that can be used for process analysis, such as classification and categorization. A textual data is strongly influenced by the language. Arabic is gaining a significant attention in many studies because Arabic language is very different from others, and in contrast to other languages, tools and research on the Arabic language is still lacking. The information extracted using the knowledge dictionary is a concept of expression. A knowledge dictionary is usually constructed manually by an expert and …

Al2O3 Oxide Morphology For Two Fe-Cr-Al Stainless Steel Foils Used In Gasoline Engine Catalytic Converters, Jennifer Suiter

Materials Engineering

Corrugated 0.05 in thick strips of Fe-Cr-Al ferritic stainless steel samples with 4% and 6% aluminum were heat treated, and the resulting Al₂O₃ oxide was analyzed using SEM imaging. Three heat treatment cycles were carried out for each sample. The heat treatments were based on future metal-substrate catalytic converter processing prior to applying the washcoat Each heat treatment started with a 90 minute ramp from room temperature to 538°C and a 32.5 minute ramp from 538°C to 899°C. The three different dwell periods at 899°C were 4 hours, 6 hours, and taking a sample out every hour …

The Case For Open Source Appropriate Technology, Joshua M. Pearce

Michigan Tech Publications, Part 1

Much of the widespread poverty, environmental desecration, and waste of human life seen around the globe could be prevented by known (to humanity as a whole) technologies, many of which are simply not available to those that need it. This lack of access to critical information for sustainable development is directly responsible for a morally and ethically unacceptable level of human suffering and death. A solution to this general problem is the concept of open source appropriate technology or OSAT, which refers to technologies that provide for sustainable development while being designed in the same fashion as free and open …

Lunalight Project: Solar-Rechargeable Led Lantern And Cell Phone Charger, Sean C. Dawson, Michael E. Deagen, Francisco N. Dye, Brian S. Mircheff, Ryan O. Ramelb

Materials Engineering

Today, 1.6 billion people in the world do not have access to grid electricity. Villagers living off the grid in developing nations resort to kerosene lanterns to light their homes. The fumes from burning kerosene are toxic and lead to respiratory illnesses over time. Our sponsor, OneMillionLights, plans to help people to escape poverty by providing them with a clean source of light at night. Children that must work in the fields during the day can use a solar-rechargeable lantern at night to read or study, and street vendors can use the lanterns at night to improve their businesses.

The …