Engineering Commons^™

Ballistic Projectile Metallurgical Issues And Fundamentals: Aerosol Production In Rod Penetration Erosion And Erosion Phenomena Associated With Railgun Development, Brenda Ivette Machado

Open Access Theses & Dissertations

The issue is derived from ballistic erosion as it relates to nanoparticle production and respiration of these particles as a health concern ballistic erosion and ballistic erosion as it relates to railgun performance. A common thread between these two issues is dynamic recrystallization (DRX). DRX has been demonstrated to be the dominant mechanism for solid-state flow associated with ballistic projectile/target penetration and interaction, friction-stir welding phenomena, and other high-strain rate deformation phenomena.

Aerosol particulates collected on filters from ballistic penetration and erosion events for W-Ni-Co and W-Ni-Fe kinetic energy rod projectiles penetrating steel target plates were observed to be highly …

Microstructural Architecture Developed In The Fabrication Of Solid And Open-Cellular Copper Components By Additive Manufacturing Using Electron Beam Melting, Diana Alejandra Ramirez

Open Access Theses & Dissertations

The fabrication of Cu components were first built by additive manufacturing using electron beam melting (EBM) from low-purity, atomized Cu powder containing a high density of Cu2O precipitates leading to a novel example of precipitate-dislocation architecture. These microstructures exhibit cell-like arrays (1-3µm) in the horizontal reference plane perpendicular to the build direction with columnar-like arrays extending from ~12 to >60 µm in length and corresponding spatial dimensions of 1-3 µm. These observations were observed by the use of optical metallography, and scanning and transmission electron microscopy. The hardness measurements were taken both on the atomized powder and the Cu components. …

Effect Of Process Parameter On Temperature Distribution, Microstructure, And Mechanical Properties Of Self-Reacting Friction Stir Welded Aluminum Alloy 6061-T651, Monica Adriana Torres

Open Access Theses & Dissertations

Self-reacting friction stir welding is the latest FSW tool configuration developed, it employs two shoulders--one on top and one on the bottom of the workpiece-- this tool configuration offers many advantages over conventional welding techniques. However, the current lack of information and specifications limits its understanding and application. This investigation analyzed the effect of process parameters on temperature distribution, microstructure evolution, and final mechanical properties of 6061-T651 SR-FS welds. A factorial experiment was carried out, in which three-process parameters were analyzed--rotational speed, travel speed, and tool plunge force-- three levels were analyzed for each parameter, except for a tool plunge …

Fabrication And Characterization Of Nanocrystalline Yttrium Oxide Thin Films For Electronic Device Applications, Mudavakkat Vikas Haridas

Open Access Theses & Dissertations

This thesis presents the optimization of growth conditions for fabricating nanocrystalline Yttrium Oxide (Y2O3) thin films on silicon and optical grade, high quality quartz substrates in order to study its structural, optical and electrical properties for electronic device applications.

Commercially Y2O3 has proven to be difficult to fabricate at high quality due to its high temperature growth requirements and the need to alter established fabrication methods for electronic devices. A high temperature requirement for high quality poses a problem for research and analysis. This calls upon for an optimization of the growth conditions to facilitate fabrication of thin films for …

The Effect Of Cr, Si And B On The Oxidation Behavior On Three Nb-Based Alloys, David Alvarez

Open Access Theses & Dissertations

Nb-based alloys are of particular interest to replace the current Ni-based superalloys for high-temperature structural applications. One important limitation to improve the efficiency of gas-turbine engines is the temperature limit of current materials being used. By allowing the temperature to increase, the efficiency will increase. Nb-based alloys have high melting points and adequate mechanical properties but the oxidation resistance is still inadequate.

This research focuses on the oxidation behavior of three Nb-based alloys to study the effect of Cr and Si variation and look at the effect of Boron. Boron can form a glassy borosilicate which is viscous at high …

Effects Of Thermo-Mechanical Loading From In-Situ Studies Of Eb-Pvd Thermal Barrier Coatings, Melan N. Jansz

Electronic Theses and Dissertations

The thermo-mechanical effects on the strain evolution within an EB-PVD thermal barrier coating (TBC) is presented in this work using in-situ characterization. Synchrotron X-ray diffraction at sector 1-ID at the Argonne National Laboratory provided both qualitative and quantitative in-situ data on the strain evolution under a thermal cycle with mechanical loading. The results show that at a critical combination of temperature and load, the stress in the thermally grown oxide (TGO) layer in the TBC reaches a tensile region. These significant findings enhance existing literature showing purely compressive strains within the TGO where mechanical loads have been neglected. The results …

Development And Characterization Of The Oxidation Behavior Of Various High Temperature Niobium Based Alloys, Benedict Isabel Portillo

Open Access Theses & Dissertations

The oxidation response of various niobium based refractory alloys from the Nb-Mo-Si-B-X alloy system has been examined at temperatures between 700 and 1400°C in air. The development of these alloys was part of an ongoing effort to develop and discover a new materials system capable of replacing nickel based super alloys. Additions of titanium were found to provide limited oxidation resistance. A discontinuous layer of TiO2 was observed to from at temperatures above 1100°C. Alloys containing titanium additions were observed to suffer from pest oxidation at low and intermediate temperatures due to the development of Nb2O5. Poor oxidation resistance at …

Graphene Based Anode Materials For Lithium-Ion Batteries, Sree Lakshmi Cheekati

Browse all Theses and Dissertations

Improvements of the anode performances in Li-ions batteries are in demand to satisfy applications in transportation. In comparison with graphitic carbons, transition metal oxides as well as graphene can store over twice amount of lithium per gram. Recently, graphene-based anodes for Li-ion batteries are under extensive development. In this research, lithium storage characteristics in graphene oxide (GO), GO/Manganese acetate (GO/MnAc), GO/manganese oxide (GO/MnOx) composites and Nano Graphene Platelets (NGP) were studied. The prepared GO delivered reversible capacities of 706mAh/g with an average columbic efficiency of 87%. Reversible capacities of 533 mAh/g were observed for GO/MnAc composite. GO/MnOx nanocomposite thermal annealed …

Highly Active Porous Catalysts Fabricated By Attachment Of Palladium Nanoparticles On Hierarchical Carbon Structures, Hema Vijwani

Browse all Theses and Dissertations

The effectiveness of metal-based catalysts can be significantly enhanced by increasing the available surface area relative to the volume through the creation of hierarchical nanostructures. The catalyst demonstrated here is palladium, which is a widely recognized heterogeneous catalyst suitable for a variety of industrial applications such as water purification, hydrogen storage, and electrochemical devices. In this study, a novel multi-scale supporting material developed in this group, has been used as support. It consists of micro-porous graphitic carbon with strongly attached carbon nanotubes. This can increase the surface area by orders of magnitude without increasing the size or weight while still …

The Functionalization And Characterization Of Adherent Carbon Nanotubes With Silver Nanoparticles For Biological Applications, Adam A. Maleszewski

Browse all Theses and Dissertations

The purpose of this project is to form silver nanoparticles (Ag-NP) attached to a hierarchical substrate for possible use in biological applications. The effectiveness of these Ag-NP-containing devices, including biofilters and biosensors, may be dramatically enhanced by the use of hierarchical structures such as carbon nanotubes (CNT), as they offer a high surface area surface suitable for cell-device interactions, while Ag-NP would be a suitable component in many such devices due to its plasmonic surface properties (e.g. in sensor and directed energy applications) and its anti-microbial properties (desirable for fluid filtration due to its low weight. Meaningful control over the …

Achieving High Efficiency Laminated Polymer Solar Cell With Interfacial Modified Metallic Electrode And Pressure Induced Crystallization, Yongbo Yuan, Yu Bi, Jinsong Huang

Department of Mechanical and Materials Engineering: Faculty Publications

We report efficient laminated organic photovoltaic device with efficiency approach the optimized device by regular method based on Poly(3-hexylthiophene-2,5-diyl) and [6,6]-phenyl-C₆₁-butyric acid methyl ester (PCBM). The high efficiency is mainly attributed to the formation of a concrete polymer/metal interface mechanically and electrically by the use of electronic-glue, and using the highly conductive and flexible silver film as anode to reduce photovoltage loss and modifying its work function for efficiency hole extraction by ultraviolet/ozone treatment, and the pressure induced crystallization of PCBM.

In Vitro Models For Glaucoma Research: Effects Of Hydrostatic Pressure, Yuan Lei, Shadi Rajabi, Ryan M. Pedrigi, Darryl R. Overby, A. Thomas Read, C. Ross Ethier

Department of Mechanical and Materials Engineering: Faculty Publications

PURPOSE. The response of cells (e.g., optic nerve head [ONH] cells) to mechanical stress is important in glaucoma. Studies have reported the biological effects of hydrostatic pressure on ONH cells cultured on a rigid substrate. An apparatus, designed to independently vary hydrostatic pressure and gas tension (including oxygen tension) in culture medium, was used to evaluate the effects of pressure and tension on cell migration, shape, and α-tubulin architecture in a transformed cell line (DITNC1 rat cortical astrocytes).

METHODS. During the assay period, cells were exposed to one of four experimental configurations: (1) control pressure and control gas tension; (2) …

Impact Of Elliptical Trainer Ergonomic Modifications On Perceptions Of Safety, Comfort, Workout, And Usability For People With Physical Disabilities And Chronic Conditions, Judith M. Burnfield, Yu Shu, Thad W. Buster, Adam P. Taylor, Carl A. Nelson

Department of Mechanical and Materials Engineering: Faculty Publications

Background The popularity of elliptical training has grown in rehabilitation, fitness, and home settings as a means for improving fitness and walking, yet many people with physical disabilities and chronic conditions experience difficulties when trying to use elliptical trainers.

Objective The purpose of this study was to compare, for people with disabilities and chronic conditions, perceptions of safety, comfort, workout, and usability of 4 elliptical trainers before and after the development of a set of low-cost adaptations.

Design This study was a quasi-experimental repeated-measures investigation.

Methods Twenty adults with diverse medical conditions and functional abilities evaluated 4 elliptical trainers for …

Use Of Environmental Scanning Electron Microscopy For In Situ Observation Of Interaction Of Cells With Micro- And Nanoprobes, Alexander Goponenko, B. J. Boyle, K. I. Jahan, Maxim V. Gerashchenko, Dmitri E. Fomenko, Vadim N. Gladyshev, Yuris A. Dzenis

Department of Mechanical and Materials Engineering: Faculty Publications

Precision intracellular sensing, probing and manipulation offer unprecedented opportunities for advances in biological sciences. Next-generation ultra-fine probes will be capable of targeting individual cell organelles. Development of such probes as well as probes capable of penetrating through tough cell walls requires detailed knowledge of cell-probe interaction. This Letter evaluated the applicability of environmental scanning electron microscopy (ESEM) for cell and cell-probe interaction imaging. Several types of cells (plant and yeast cells as well as mouse spermatozoa) were successfully imaged in their natural state, with mouse spermatozoa observed by ESEM for the first time. Computerized stage applied to image was tough …

Nanomechanical Analysis Of Insulinoma Cells After Glucose And Capsaicin Stimulation Using Atomic Force Microscopy, Ruiguo Yang, Ning Xi, King Wai-Chu Lai, Bei-Hua Zhong, Carmen Kar-Man Fung, Chen-Geng Qu, Donna H. Wang

Department of Mechanical and Materials Engineering: Faculty Publications

Aim: Glucose stimulates insulin secretion from pancreatic islet β cells by altering ion channel activity and membrane potential in the β cells. TRPV1 channel is expressed in the β cells and capsaicin induces insulin secretion similarly to glucose. This study aims to investigate the biophysical properties of the β cells upon stimulation of membrane channels using an atomic force microscopic (AFM) nanoindentation system.

Methods: ATCC insulinoma cell line was used. Cell stiffness, a marker of reorganization of cell membrane and cytoskeleton due to ion channel activation, was measured in real time using an integrated AFM nanoindentation system. Cell height that …

Nanostructured Arrays For Sensing And Energy Storage Applications, Raghu Mangu

University of Kentucky Doctoral Dissertations

Vertically aligned multi walled carbon nanotube (MWCNT) arrays fabricated by xylene pyrolysis in anodized aluminum oxide (AAO) templates without the use of a catalyst, were integrated into a resistive sensor design. The steady state sensitivities as high as 5% and 10% for 100 ppm of NH₃ and NO₂ respectively at a flow rate of 750 sccm were observed. A study was undertaken to elucidate (i) the dependence of sensitivity on the thickness of amorphous carbon layers, (ii) the effect of UV light on gas desorption characteristics and (iii) the dependence of room temperature sensitivity on different NH_{3 …}

Comparison Of Different Integral Histogram Based Tracking Algorithms, Sriharsha Atluri

LSU Master's Theses

Object tracking is an important subject in computer vision with a wide range of applications – security and surveillance, motion-based recognition, driver assistance systems, and human-computer interaction. The proliferation of high-powered computers, the availability of high quality and inexpensive video cameras, and the increasing need for automated video analysis have generated a great deal of interest in object tracking algorithms. Tracking is usually performed in the context of high-level applications that require the location and/or shape of the object in every frame. Research is being conducted in the development of object tracking algorithms over decades and a number of approaches …

Characterization Of Novel Akermanite:Poly-E-Caprolactone Scaffolds For Bone Tissue Engineering Aapplications Combined With Human Adipose-Derived Stem Cells, Andre S. Zanetti

LSU Doctoral Dissertations

The development of porous materials useful as scaffolds for the sustained three-dimensional (3D) growth of human adipose-derived stem cells (hASC) is of particular interest to facilitate healing after musculoskeletal injuries. In this study, a composite porous material obtained by blending akermanite with poly-e-caprolactone (PCL) is proposed as novel alternative to bone tissue regeneration. The objectives of this study are (1) to characterize the akermanite:PCL scaffold properties; (2) to investigate the in vitro osteogenic potential of hASC loaded to optimal akermanite:PCL scaffolds; (3) to assess the metabolic activity and osteogenesis of hASC loaded to optimal akermanite:PCL scaffolds post-thawing using optimal cryopreservation …

Droplet Motion On Miniaturized Ratchets, Jeong Tae Ok

LSU Doctoral Dissertations

The main objective of this study is to evaluate the feasibility of using miniaturized asymmetric structures to move liquid droplets and understand the driving mechanism. We developed the fabrication process for large area topological ratchets with the period ranging from millimeter down to sub-micrometer using micromachining techniques. Non-wetting superhydrophobic surfaces were successfully fabricated using soft UV or thermal nanoimprint lithography, reactive ion etching by oxygen plasma, and chemical surface modification by fluorinated silane vapor deposition. An accurate and reproducible experimental setup equipped with high speed camera and automatic injection system was established. Image processing tools allowed us to obtain various …

Automated Semantic Understanding Of Human Emotions In Writing And Speech, Ricardo A. Calix

LSU Doctoral Dissertations

Affective Human Computer Interaction (A-HCI) will be critical for the success of new technologies that will prevalent in the 21st century. If cell phones and the internet are any indication, there will be continued rapid development of automated assistive systems that help humans to live better, more productive lives. These will not be just passive systems such as cell phones, but active assistive systems like robot aides in use in hospitals, homes, entertainment room, office, and other work environments. Such systems will need to be able to properly deduce human emotional state before they determine how to best interact with …

Dispersive Wave Equations For Solids With Microstructure, A. Berezovski, Juri Engelbrecht, Mihhail Berezovski

Publications

The dispersive wave motion in solids with microstructure is considered in the one-dimensional setting in order to understand better the mechanism of dispersion. It is shown that the variety of dispersive wave propagation models derived by homogenization, continualisation, and generalization of continuum mechanics can be unified in the framework of dual internal variables theory.

New Media Icc Profiles Construction And Concerns, Reem El Asaleh

Dissertations

With the advent of the modern digital technology, users can now capture an image and reproduce it between different media, such as display it on LCD monitor or tablet computer, print it on desktop printer or send it to a printing press. The challenge has been then to maintain the accuracy of image colors during this reproduction, which has led to the development of Color Management Systems. Using these systems, the color reproduction across-media will be accomplished using device ICC profiles that describe each device’s color characterization data in a standardized format based on International Color Consortium (ICC) specifications.

ICC …

Polymer Based Microfabrication And Its Applications In Optical Mems And Biomems, Guocheng Shao

LSU Doctoral Dissertations

Due to its ease of fabrication, low cost and great variety of functionalities, polymer has become an important material in microfabrication. MEMS devices with polymer as the structure material have found applications in various fields, especially in BioMEMS and optical MEMS. In this dissertation, three polymer based microfabricated devices/components have been developed and tested. Various polymer based fabrication techniques, such as high aspect ratio SU-8 photolithography, three dimensional polydimethylsiloxane (PDMS) soft lithography, multi-layer soft lithography and PDMS double casting technique have been developed/studied and employed in the device fabrication process. The main contribution of this dissertation includes: (1) Developed two …

Design Decisions Under Risk And Uncertainty, Sravya Thoomu

All Theses

In the contemporary world of engineering, engineers strive towards designing reliable and robust artifacts while considering and attempting to control manufacturing costs. In due course they have to deal with some sort of uncertainty. Many aspects of the design are the result of properties that are defined within some tolerances, of measurements that are appropriate, and of circumstances and environmental conditions that are out of their control. This uncertainty was typically handled by using factors of safety, and resulted in designs that may have been overly conservative. Therefore, understanding and handling the uncertainties is critical in improving the design, controlling …

Anomalous Loss Of Toughness Of Work Toughened Polycarbonate, Shawn E. Meagher

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

Glassy polymers such as polycarbonate (PC) can be toughened through compressive plastic deformation. The increase in toughness is substantial, showing as much as a fifteen fold increase in the amount of dissipated energy during failure for samples compressed to 50% plastic strain. This toughness increase can be reversed through thermal aging at temperatures below the glass transition temperature (T_g = 147°C).

The combined effect of plastic compression and thermal aging has been studied using Charpy, Single Edge Notch Bending (SENB), and Compact Tension (CT) tests. The tests mapped the response of samples cut along different orientations relative to the …

Hybrid Nanomanufacturing Process For High-Rate Polymer Nanofiber Production, Chad T. Peterson

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

Nanotechnology and nanomaterials have the potential to revolutionize existing and create entirely new industries. Unique physical, mechanical, chemical, and biological properties of nanomaterials have been extensively documented in the last two decades. However, most nanomaterials are discontinuous in nature, creating problems with their processing and manipulation into devices and raising health concerns. Continuous nanofibers represent an emerging class of nanomaterials with critical advantages to applications. Continuous nanofibers are readily produced by electrospinning process comprising spinning polymer solutions in high electric fields. Electrospinning is a very economic top-down nanomanufacturing process that has been used to produce ultrafine continuous nanofibers from several …

Me-Em Enewsbrief, December 2010, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Processing And Composition Effects On The Fracture Behavior Of Spray-Formed 7xxx Series Al Alloys, Mala M. Sharma, Constance W. Ziemian, Timothy J. Eden

Faculty Journal Articles

The fracture properties of high-strength spray-formed Al alloys were investigated, with consideration of the effects of elemental additions such as zinc,manganese, and chromium and the influence of the addition of SiC particulate. Fracture resistance values between 13.6 and 25.6 MPa (m)^1/2 were obtained for the monolithic alloys in the T6 and T7 conditions, respectively. The alloys with SiC particulate compared well and achieved fracture resistance values between 18.7 and 25.6 MPa (m)^1/2. The spray-formed materials exhibited a loss in fracture resistance (KI) compared to ingot metallurgy 7075 alloys but had an improved
performance compared to high-solute powder …

Electrochemical Detection For The Corrosion Of Reinforcing Steel In Concrete During Immersion And Drying Cycles, Bing-Li Jia, Fa-He Cao, An-Na Chen, Jian-Qing Zhang

Journal of Electrochemistry

The corrosion behavior of reinforcing steel in concrete under dry-wet cycle condition has been studied by electrochemical noise(EN) compared with the electrochemical impedance spectroscopy(EIS),SEM micrographs and EDS.The statistical method has been employed to analyze the EN data of reinforcing steel in concrete,which revealed three different corrosion stages of reinforcing steel in concrete,including the dissolution of the passive film,the active corrosion and the cumulation of corrosion product.The wavelet transform has also been employed,which indicated that steel in concrete with pH 1 is associated with uniform corrosion,while steel in concrete with pH 3 and pH 7 are associated with localized corrosion,such as …

Study On Preparing Technology And Corrosion Resistance Of Ti/Zr Based Chromium-Free Chemical Conversion Coating On Zinc Electroplating Layer, Yong Guan, Jian-Guo Liu, Chuan-Wei Yan

Journal of Electrochemistry

In this paper,we obtained environmental-friendly chromium-free chemical conversion coating on the non-cyanide alkaline zinc electroplating layer by employing the optimized Ti/Zr based conversion technique.At the same time,the performances of the Ti/Zr based conversion coating were compared with chromate colour passivation coating.The corrosion resistances of the conversion coatings were investigated by using neutral salt spray(NSS) test,potentiodynamic polarization and electrochemical impedance spectroscopy(EIS).The results showed that the white rust appeared after 96 hours when the NSS test was performed on the Ti/Zr based conversion coating,which was close to the corrosion resistance rating of chromate colour passivation coating.Compared with the chromate passivation coating,the Ti/Zr …