Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Engineering Science and Materials

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 3661 - 3690 of 5705

Full-Text Articles in Engineering

Process Study And Control Of Electron Beam Melting Technology Using Infrared Thermography, Jorge Mireles Jan 2013

Process Study And Control Of Electron Beam Melting Technology Using Infrared Thermography, Jorge Mireles

Open Access Theses & Dissertations

An IR camera was installed in an Arcam A2 system (Arcam AB, Mölndal, Sweeden) and layer-by-layer image acquisition was achieved. The camera's capability to detect manufacturing defects was evaluated by implementing computer vision techniques using LabVIEW measurement and programming software (National Instruments, Austin, TX). Thermal maps acquired by the IR camera allowed layer-by-layer part temperature to be recorded. A core objective of this research was to study the impact of processing temperature on EBM-fabricated Ti-6Al-4V parts and achieve controlled mechanical properties. In this research, build variations were achieved by modifying parameters that change processing temperature from the standard processing temperature. …

Go to article

Experimental Study On The Fabrication Of Advanced Materials For Energy Applications Using High Energy Mechanical Milling, Ashvin Kumar Narayana Swamy Jan 2013

Experimental Study On The Fabrication Of Advanced Materials For Energy Applications Using High Energy Mechanical Milling, Ashvin Kumar Narayana Swamy

Open Access Theses & Dissertations

The reaction of aluminum (Al) powder with water has the potential for on demand hydrogen generation. Conventional Al powders, however, react with water slowly due to a highly protective oxide layer on the particle surface. Current methods for Al activation involve harmful and expensive materials. The nano-scale Al powders also remain very expensive and have problems such as a large amount of oxide on the surface. The use of aluminum in an energy generation cycle is also hindered by the fact that, although Al is the most abundant metal in the Earth's crust, its recovery from ore consumes a lot …

Go to article

Effect Of Hafnium-Incorporation On The Microstructure And Dielectric Properties Of Cobalt Ferrite Ceramics, Stephen Josiah Wells Jan 2013

Effect Of Hafnium-Incorporation On The Microstructure And Dielectric Properties Of Cobalt Ferrite Ceramics, Stephen Josiah Wells

Open Access Theses & Dissertations

The effect of hafnium ion (Hf4+) incorporation in cobalt ferrite (CFO) was studied. Samples of Hf substituted CFO ceramic (CoFe2-xHfxO4), were synthesized in the laboratory with hafnium concentrations ranging from x=0.000 to x=0.200. X-ray diffraction scans show that the Hafnium CFO crystalizes in the inverse spinel phase. Inclusion of hafnium causes lattice expansion, increasing the lattice parameter from 8.374 í? for pure CoFe2O4 to 8.391 í? for the highest concentration of hafnium tested (x=0.020). The dielectric properties of CFO are greatly enhanced by inclusion of hafnium. The enhancement is due to the …

Go to article

Thermal Barrier Coatings (Tbc's) For High Heat Flux Thrust Chambers, Christopher Michael Bradley Jan 2013

Thermal Barrier Coatings (Tbc's) For High Heat Flux Thrust Chambers, Christopher Michael Bradley

Open Access Theses & Dissertations

The last 30 years materials engineers have been under continual pressure to develop materials with a greater temperature potential or to produce configurations that can be effectively cooled or otherwise protected at elevated temperature conditions. Turbines and thrust chambers produce some of the harshest service conditions for materials which lead to the challenges engineers face in order to increase the efficiencies of current technologies due to the energy crisis that the world is facing. The key tasks for the future of gas turbines are to increase overall efficiencies to meet energy demands of a growing world population and reduce the …

Go to article

Microstructure And Properties For Titanium Aluminide Superalloy Prototypes Fabricated By Electron Beam Melting And Thermally Processed, Jennifer Hernandez Jan 2013

Microstructure And Properties For Titanium Aluminide Superalloy Prototypes Fabricated By Electron Beam Melting And Thermally Processed, Jennifer Hernandez

Open Access Theses & Dissertations

Gamma TiAl has been considered to be an ideal replacement for Ni-base superalloy aerospace applications, particularly in weight-critical applications. While bulk, fully dense gamma-TiAl is 50% less dense than Ni-base superalloys, it also has excellent mechanical properties at high temperature (up to ~800°C). Pre alloyed (Ti-48Al-2Cr-2Nb) powder was used to fabricate solid, fully dense (3.85 g/cm3) components and foam components with densities ranging from 0.33 g/cm3 to 0.46 g/cm3 by electron beam melting (EBM). A 10:1 blend of 2-phase TiAl (Ti-48Al-2Cr-2Nb in a/o) : Inconel 625 (Ni-22Cr-6Mo-2Nb in a/o) pre-alloyed powders produced …

Go to article

New Topics On Nanoindentation Of Polymers And Composite Materials, Ricardo Martinez-Hernandez Jan 2013

New Topics On Nanoindentation Of Polymers And Composite Materials, Ricardo Martinez-Hernandez

Open Access Theses & Dissertations

In this study, nanoindentation was used to determine Young's modulus of homogeneous plastic materials as well as inhomogeneous epoxy woven fabric composites using various indenters. In the first part, homogeneous PMMA and polycarbonate were characterized using conical and spherical indenters. The conventional approach of the inverse analysis was modified in order to account for effects obtained during spherical nanoindentation. The experimental results were verified using FEA analysis in ABAQUS. It was found that viscous effects were present in conical nanoindentations which led to an overestimation of contact stiffness. The second part, the response of carbon and glass fiber woven fabric …

Go to article

Rbd2po4: Room Temprature Synthesis, Chemical And Structural Stablity Upon Heating, Masoud Mollaee Jan 2013

Rbd2po4: Room Temprature Synthesis, Chemical And Structural Stablity Upon Heating, Masoud Mollaee

Open Access Theses & Dissertations

Monoclinic RbD2PO4 polycrystals were synthesized via the room temperature crystallization of RbH2PO4 dissolved in D2O. Powder x-ray diffraction (XRD) data collected at T=25 ºC indicate that this deuterated compound crystallizes in space group P21/m with unit cell parameters a=7.688í?, b=6.192í?, c=4.781í? and β=109.02°, and is isomorphic with the intermediate-temperature phase of its hydrogenated counterpart rubidium dihydrogen phosphate (RDP). We found no evidence of previously reported [Phase Transitions 80, 17 (2007)] polymorphic phase transition in rubidium dideuterium phosphate (DRDP) upon heating from room temperature to 210 ºC. All lattice parameters vary smoothly within this temperature range, demonstrating that the P21/m phase …

Go to article

Carbon-Based Nanostructured Materials As Electrode In Lithium-Ion Batteries And Supercapacitors, Zhuo Yao Jan 2013

Carbon-Based Nanostructured Materials As Electrode In Lithium-Ion Batteries And Supercapacitors, Zhuo Yao

Browse all Theses and Dissertations

Carbon-based nancomposites attract much attention as electrode materials in electrochemical energy storage systems due to their low-cost, extraordinary high electrical and thermal conductivity, super high surface area etc. In this research, graphene nanosheets (GNS) and their nanocomposites with manganese oxides (GNS/MnOx) or silicon nanowires (GNS/SiNWs/CF) are studied for their applications in Li-ion batteries and supercapacitors. GNS powders are synthesized via a chemical oxidation of nature graphite followed by appropriate reduction process. GNS/MnOx composites are synthesized rendering MnOx nanoparticles embedded on the surfaces of GNS. SiNWs grown in carbon fibers are mechanically mixed with GNS powders. The impacts of the manganese …

Go to article

Active Optimal Control Strategies For Increasing The Efficiency Of Photovoltaic Cells, Sharif Aljoaba Jan 2013

Active Optimal Control Strategies For Increasing The Efficiency Of Photovoltaic Cells, Sharif Aljoaba

Theses and Dissertations--Electrical and Computer Engineering

Energy consumption has increased drastically during the last century. Currently, the worldwide energy consumption is about 17.4 TW and is predicted to reach 25 TW by 2035. Solar energy has emerged as one of the potential renewable energy sources. Since its first physical recognition in 1887 by Adams and Day till nowadays, research in solar energy is continuously developing. This has lead to many achievements and milestones that introduced it as one of the most reliable and sustainable energy sources. Recently, the International Energy Agency declared that solar energy is predicted to be one of the major electricity production energy …

Go to article

Solution-Processed Nanoparticle Super-Float-Gated Organic Field-Effect Transistor As Un-Cooled Ultraviolet And Infrared Photon Counter, Yongbo Yuan, Qingfeng Dong, Bin Yang, Fawen Guo, Qi Zhang, Ming Han, Jinsong Huang Jan 2013

Solution-Processed Nanoparticle Super-Float-Gated Organic Field-Effect Transistor As Un-Cooled Ultraviolet And Infrared Photon Counter, Yongbo Yuan, Qingfeng Dong, Bin Yang, Fawen Guo, Qi Zhang, Ming Han, Jinsong Huang

Department of Mechanical and Materials Engineering: Faculty Publications

High sensitivity photodetectors in ultraviolet (UV) and infrared (IR) range have broad civilian and military applications. Here we report on an un-cooled solution-processed UV-IR photon counter based on modified organic field-effect transistors. This type of UV detectors have light absorbing zinc oxide nanoparticles (NPs) sandwiched between two gate dielectric layers as a floating gate. The photon-generated charges on the floating gate cause high resistance regions in the transistor channel and tune the source-drain output current. This ‘‘super-float-gating’’ mechanism enables very high sensitivity photodetectors with a minimum detectable ultraviolet light intensity of 2.6 photons/µm2s at room temperature as well …

Go to article

Analysis Of Electrically-Forced Vibrations Of Piezoelectric Mesa Resonators, Huijing He, Guo-Quan Nie, Jin-Xi Liu, Jiashi Yang Jan 2013

Analysis Of Electrically-Forced Vibrations Of Piezoelectric Mesa Resonators, Huijing He, Guo-Quan Nie, Jin-Xi Liu, Jiashi Yang

Department of Mechanical and Materials Engineering: Faculty Publications

We study the electrically forced thickness-shear and thickness-twist vibrations of stepped thickness piezoelectric plate mesa resonators made of polarized ceramics or 6-mm class crystals. A theoretical analysis based on the theory of piezoelectricity is performed, and an analytical solution is obtained using the trigonometric series. The electrical admittance, resonant frequencies, and mode shapes are calculated, and strong energy trapping of the modes is observed. Their dependence on the geometric parameters of the resonator is also examined.

Go to article

Review Of Electrochemical And Electrodischarge Machining, Kamlakar P. Rajurkar, M. M. Sundaram, A. P. Malshe Jan 2013

Review Of Electrochemical And Electrodischarge Machining, Kamlakar P. Rajurkar, M. M. Sundaram, A. P. Malshe

Department of Mechanical and Materials Engineering: Faculty Publications

Electrochemical and electro-discharge machining processes are the two major electro-machining processes with unique capabilities. Electrical Discharge Machining (EDM) and Electrochemical Machining (ECM) offer a better alternative or sometimes the only alternative in generating accurate 3-D complex shaped macro, micro and nano features and components of difficult–to-machine materials. Technological advances reported in electrochemical and electro discharge machining processes, which reflect the state of the art in academic and industrial research and applications, are briefly reviewed in this paper.

Go to article

Wire Electro-Discharge Machining Of Titanium Alloy, Farnaz Nourbakhsh, Kamlakar P. Rajurkar, Ajay P. Malshe, Jian Cao Jan 2013

Wire Electro-Discharge Machining Of Titanium Alloy, Farnaz Nourbakhsh, Kamlakar P. Rajurkar, Ajay P. Malshe, Jian Cao

Department of Mechanical and Materials Engineering: Faculty Publications

This paper presents an experimental investigation of wire electro-discharge machining (WEDM) of titanium alloy. The objective is to investigate the effect of seven process parameters including pulse width, servo reference voltage, pulse current, and wire tension on process performance parameters (such as cutting speed, wire rupture and surface integrity). A Taguchi L18 design of experiment (DOE) has been applied. All experiments have been conducted using Charmilles WEDM. It was also found that the cutting speed increases with peak current and pulse interval. Surface roughness was found to increase with pulse width and decrease with pulse interval. The Analysis of Variance …

Go to article

Selective Detection And Automated Counting Of Fluorescently-Labeled Chrysotile Asbestos Using A Dual-Mode High-Throughput Microscopy (Dm-Htm) Method, Myoung-Ock Cho, Hyo Mi Chang, Donghee Lee, Yeon Gyu Yu, Hwataik Han, Jung Kyung Kim Jan 2013

Selective Detection And Automated Counting Of Fluorescently-Labeled Chrysotile Asbestos Using A Dual-Mode High-Throughput Microscopy (Dm-Htm) Method, Myoung-Ock Cho, Hyo Mi Chang, Donghee Lee, Yeon Gyu Yu, Hwataik Han, Jung Kyung Kim

Department of Mechanical and Materials Engineering: Faculty Publications

Phase contrast microscopy (PCM) is a widely used analytical method for airborne asbestos, but it is unable to distinguish asbestos from non-asbestos fibers and requires time-consuming and laborious manual counting of fibers. Previously, we developed a high-throughput microscopy (HTM) method that could greatly reduce human intervention and analysis time through automated image acquisition and counting of fibers. In this study, we designed a dual-mode HTM (DM-HTM) device for the combined reflection and fluorescence imaging of asbestos, and automated a series of built-in image processing commands of ImageJ software to test its capabilities. We used DksA, a chrysotile-adhesive protein, for selective …

Go to article

Photovoltaic Device, Jinsong Huang, Bin Yang, Yongbo Yuan Jan 2013

Photovoltaic Device, Jinsong Huang, Bin Yang, Yongbo Yuan

Department of Mechanical and Materials Engineering: Faculty Publications

An apparatus includes a substrate; and a photoactive layer disposed on the substrate. The photoactive layer includes an electron acceptor material; an electron donor material; and a material having dipoles.

Go to article

Elastic–Plastic Analysis And Strength Evaluation Of Adhesive Joints In Wind Turbine Blades, Yi Hua, Ananth Ram Mahanth Kasavajhala, Linxia Gu Jan 2013

Elastic–Plastic Analysis And Strength Evaluation Of Adhesive Joints In Wind Turbine Blades, Yi Hua, Ananth Ram Mahanth Kasavajhala, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

The objective of this paper is to investigate the performance of adhesive joints of carbon/epoxy wind turbine blade subjected to combined bending and tension loadings through finite element method. The influence of adhesive material properties and geometrical details including fillet and imperfections was examined in terms of interlaminar stresses in the adhesive layer. The variation of stress intensity with change in adhesive shear modulus has also been investigated, while contour integral method was used for evaluating the stress intensity factors (SIF) at the imperfection tip. Furthermore, the strength of the joint was assessed through the crack initiation and propagation analysis. …

Go to article

Scaling Of The Coercive Field In Ferroelectrics At The Nanoscale, R. V. Gaynutdinov, M. Minnekaev, S. Mitko, A. L. Tolstikhina, A. Zenkevich, Stephen Ducharme, Vladimir M. Fridkin Jan 2013

Scaling Of The Coercive Field In Ferroelectrics At The Nanoscale, R. V. Gaynutdinov, M. Minnekaev, S. Mitko, A. L. Tolstikhina, A. Zenkevich, Stephen Ducharme, Vladimir M. Fridkin

Stephen Ducharme Publications

The scaling of the coercive field in ferroelectric films at the nanoscale is investigated experimentally. The scaling in the films of copolymer vinylidene fluoride and BaTiO3 with thickness equal by the order of value to the critical domain nucleus size 1–10 nm reveals deviation from the well-known Kay–Dunn law. At this thickness region coercive field does not depend on thickness and coincides with Landau–Ginzburg–Devonshire value.

Go to article

Experiments To Measure The Effects Of Timber Harvesting Equipment On Surface Lithic Scatters, Douglas J. Baughman Jan 2013

Experiments To Measure The Effects Of Timber Harvesting Equipment On Surface Lithic Scatters, Douglas J. Baughman

All Master's Theses

The importance of cultural resource preservation cannot be overstated; however local economies are at least as important. Due to conservative archaeological site protection practices in Region 5 of the United States Forest Service, the economy of Northeastern California is being adversely affected. In an attempt to help the Forest Service make more informed management decisions and improve the Northeastern California economy, I undertook experiments on the effects of timber harvesting on lithic scatters on Modoc National Forest. The experiments involved placement of 225 glass tiles (proxy lithics) in each of three plots subject to vehicle traffic and log dragging by …

Go to article

Impedance Changes In Biceps Brachii Due To Isometric Contractions And Muscle Fatigue Using Electrical Impedance Myography (Eim), Travis Orth Jan 2013

Impedance Changes In Biceps Brachii Due To Isometric Contractions And Muscle Fatigue Using Electrical Impedance Myography (Eim), Travis Orth

College of Graduate Studies: Theses & Dissertations

Electrical impedance myography (EIM) is a non-invasive technique used to evaluate neuromuscular conditions by using a quantitative parameter called impedance (Z). It relies upon the application and measurement of high-frequency, low-intensity electrical current imbedded over a localized muscle to determine its opposition to current flow. In brevity, impedance determines the resistance of muscle fibers due to changes in muscle composition. The objective of this thesis was to establish a relationship between muscles at rest and during isometric contractions at various force levels(25%, 50%, and 100% of maximum voluntary contraction) of the biceps brachii over a multifrequency spectrum. Impedance measurements due …

Go to article

Quantification Of The Environmental Impact Of Titanium Dioxide Photocatalytic Pavements For Air Pollution Remediation, Heather Lee Dylla Jan 2013

Quantification Of The Environmental Impact Of Titanium Dioxide Photocatalytic Pavements For Air Pollution Remediation, Heather Lee Dylla

LSU Doctoral Dissertations

Photocatalytic concrete pavements are a promising technology for mobile source air pollution remediation, however before widespread application of this technology is realized many unanswered questions remain regarding its overall environmental impact. In response to these questions, the goal of this study was to increase the understanding of the environmental impact of photocatalytic concrete pavement highways. To achieve this goal, the objectives of this study were to (A) construct a model that evaluates the nitrogen oxides (NOx) reduction from photocatalytic pavements, (B) quantify the nitrates released from the photocatalytic degradation of NOx, and (C) identify and characterize pathways for TiO2 nanoparticle …

Go to article

Silver Nanoparticles As Drug Delivery Systems, Ammar Tahseen Qureshi Jan 2013

Silver Nanoparticles As Drug Delivery Systems, Ammar Tahseen Qureshi

LSU Doctoral Dissertations

The goal of this project is to study the potential applications of silver nanoparticles (SNPs) in the medical device and pharmaceutical industries. Bone cements have been used in the orthopedic surgeries for many years to anchor prosthetics while filling up the spaces between the prostheses and bone. Antibiotics are an active component of bone cements but the increasing bacterial resistance to these antibiotics and difficulty of shaping and molding the bone cements increases the need for new antimicrobial biomaterials. Adult stem cell based regenerative therapies have been one of the most widely researched areas of tissue engineering. This is due …

Go to article

Designing A Cost Effective Microalgae Harvesting Strategy For Biodiesel Production With Electrocoagulation And Dissolved Air Flotation, Adam James Dassey Jan 2013

Designing A Cost Effective Microalgae Harvesting Strategy For Biodiesel Production With Electrocoagulation And Dissolved Air Flotation, Adam James Dassey

LSU Doctoral Dissertations

Microalgal harvesting strategies for biodiesel production have been a major setback in the industry with high energy estimates of $3400/ton biomass by centrifugation. The present study utilized effective mass and energy balances to reduce these large operating costs. The energy for Stage 1 centrifugation was reduced by 82% when harvesting 28.5% of biomass at 18 L/min as opposed to 95% harvesting at 1 L/min. This strategy was further confirmed using electrocoagulation (EC) with Nannochloris and Dunaliella algae with perforated aluminum and iron electrodes at low (< 6 mg/L) metal ion concentrations. Despite 20% lower harvesting efficiencies, the iron electrodes were more energy and cost efficient with operating costs less than $0.03/L oil when flocculating and settling Nannochloris and Dunaliella cultures. Furthermore, a continuous multistage algae harvester using EC and dissolved air flotation (DAF) for Stage 1 harvesting and centrifugation for Stage 2 dewatering was designed. It was determined throughout the testing that greater EC costs for improved harvesting efficiencies were necessary to offset the large energy requirements of the DAF. The multistage system dewatered a low density (100 mg/L) Nannochloris to 20% solids for a final energy requirement of 1.536 kWh/kg algae ($138/ton). Using the data collected from this research and existing literature, a life cycle analysis was assembled to judge the sustainability of microalgal biofuels in Louisiana. High and low energy estimates for culturing (mixing, CO2, nutrients), harvesting, lipid extraction and energy conversion were compared with the current research. Scaling the EC/DAF system for a full size facility was expected to reduce the harvesting costs to 1.133 kWh/kg algae, resulting as $0.44/L oil for a culture with 20% lipids. Despite this improvement in harvesting costs, the production of algal for the sole purpose of biodiesel was not economically viable. Considering a system with a growth rate of 15 g/m2/day and lipid content of 20%, the energy inputs exceeded the outputs from biodiesel production by 36% under the most ideal conditions. However, incorporating additional revenue through wastewater treatment and biogas production from residual biomass could improve sustainability and profitability of algal biodiesel to an 18.5% energy surplus at its current state.

Go to article

Geodatabase-Assisted Storm Surge Modeling, Sait Ahmet Binselam Jan 2013

Geodatabase-Assisted Storm Surge Modeling, Sait Ahmet Binselam

LSU Doctoral Dissertations

Tropical cyclone-generated storm surge frequently causes catastrophic damage in communities along the Gulf of Mexico. The prediction of landfalling or hypothetical storm surge magnitudes in U.S. Gulf Coast regions remains problematic, in part, because of the dearth of historic event parameter data, including accurate records of storm surge magnitude (elevation) at locations along the coast from hurricanes. While detailed historical records exist that describe hurricane tracks, these data have rarely been correlated with the resulting storm surge, limiting our ability to make statistical inferences, which are needed to fully understand the vulnerability of the U.S. Gulf Coast to hurricane-induced storm …

Go to article

A Metaheuristic-Based Simulation Optimization Framework For Supply Chain Inventory Management Under Uncertainty, Qinglin Duan Jan 2013

A Metaheuristic-Based Simulation Optimization Framework For Supply Chain Inventory Management Under Uncertainty, Qinglin Duan

LSU Doctoral Dissertations

The need for inventory control models for practical real-world applications is growing with the global expansion of supply chains. The widely used traditional optimization procedures usually require an explicit mathematical model formulated based on some assumptions. The validity of such models and approaches for real world applications depend greatly upon whether the assumptions made match closely with the reality. The use of meta-heuristics, as opposed to a traditional method, does not require such assumptions and has allowed more realistic modeling of the inventory control system and its solution. In this dissertation, a metaheuristic-based simulation optimization framework is developed for supply …

Go to article

Roles Of Compressive Residual Stress In Enhancing The Corrosion Resistance Of Nano Nitride Composite Coatings On Steel, Xiaoli Zhao, Paul Munroe, Daryoush Habibi, Zonghan Xie Jan 2013

Roles Of Compressive Residual Stress In Enhancing The Corrosion Resistance Of Nano Nitride Composite Coatings On Steel, Xiaoli Zhao, Paul Munroe, Daryoush Habibi, Zonghan Xie

Research outputs 2013

Nanocomposite coatings were synthesized, and subsequently annealed, in an attempt to understand the influence of residual stress upon their resistance to corrosion under acidic attack. Pitting corrosion, originating from microscopic coating defects, was commonly identified in the coatings subject to annealing. Finite element analysis was used to map the residual stress distribution adjacent to these defects and quantify resulting geometrical changes. The results show that with the presence of compressive residual stress in the coatings, corrosion-initiated cracking along weak interfaces was suppressed, and structural integrity maintained. Moreover, compressive residual stress helped constrict pre-existing structural defects in columnar-structured coatings and, in …

Go to article

Use Of Comsol Simulation For Undergraduate Fluid Dynamics Course, Hyun J. Kwon Jan 2013

Use Of Comsol Simulation For Undergraduate Fluid Dynamics Course, Hyun J. Kwon

Faculty Publications

The COMSOL software was used to introduce CFD and teach fluid dynamics more effectively. Introduction of CFD has become an important part of fluid dynamics in recent years; however, undergraduate students have less access to practical exposure to it, unless they take additional elective courses which are seldom offered in undergrad predominant institutes. Simulation has become an essential step in designing and optimizing process in many engineering problems. Therefore, the COMSOL simulation project was assigned to undergraduate CFD as a part of their term project to enhance their exposure to simulation software and help understanding the use of simulation on …

Go to article

Optimizing Light Requirements And Dilution Rates For Maximizing Algal Cell Growth And Lipid Content For Biofuel Feedstock Production, Beatrice Gabriela Terigar Jan 2013

Optimizing Light Requirements And Dilution Rates For Maximizing Algal Cell Growth And Lipid Content For Biofuel Feedstock Production, Beatrice Gabriela Terigar

LSU Doctoral Dissertations

There is a rapidly growing interest in the potential of microalgae as feedstock for the next generation of biofuels. The current study was designed to meet the following objectives: (1) Investigate the interdependence among cell density, biomass and lipid productivity to maximize feedstock production from outdoor cultures; (2) Investigate the effect of cycling high-intensity lights to identify optimum Dark:Light (D/L) ratios, which can be effectively used by researchers to maximize aerial biomass productivities; (3) Develop a deterministic model to simulate the biomass productivity in an continuous-flow bioreactor at various hydraulic retention times. Results indicated that variation in HRTs has a …

Go to article

Variability And Characteristics Of Recycled Asphalt Shingles Sampled From Different Sources, Aaron Lodge Jan 2013

Variability And Characteristics Of Recycled Asphalt Shingles Sampled From Different Sources, Aaron Lodge

LSU Master's Theses

Recent literature studies have demonstrated depletion in natural resources; therefore, making resources needed for the pavement industry is more costly. There is a need to minimize cost and to try to reduce the depletion of natural resources. While the recycling of asphalt shingles is beneficial in reducing the consumption of virgin materials, pavement performance should not be compromised. One major concern with recycled asphalt shingles (RAS) relates to the variability in the properties of the recycled materials originating from different sources. In addition, the rheological properties of RAS have not been evaluated as well as its influence on the virgin …

Go to article

Electrocatalytic Oxidation Of Formic Acid On Pd/Ni Heterostructured Catalyst, Mingjun Ren, Liangliang Zou, Ju Chen, Ting Yuan, Qinghong Huang, Haifeng Zhang, Hui Yang, Songlin Feng Dec 2012

Electrocatalytic Oxidation Of Formic Acid On Pd/Ni Heterostructured Catalyst, Mingjun Ren, Liangliang Zou, Ju Chen, Ting Yuan, Qinghong Huang, Haifeng Zhang, Hui Yang, Songlin Feng

Journal of Electrochemistry

A Pd/Ni bimetallic nanostructured electrocatalyst was fabricated via a two-step reduction route. Owing to an epitaxial growth of Pd atoms on the surface of Ni nanoparticles, heterostructured Pd/Ni nanocomposites were formed and verified by high resolution transmission electron microscopy combined with energy-dispersion X-ray spectroscopy. X-ray diffraction confirmed that the as-prepared Pd/Ni nanocomposites possessed a single face-centered-cubic (fcc) Pd structure, probably due to a weaker diffraction intensity of metallic Ni and/or overlapping by that of Pd. The intrinsic catalytic activity on the Pd/Ni is higher than that on the Pd. Moreover, the durability of formic acid oxidation on the Pd/Ni was …

Go to article

Electrochemical Performance Of Screen-Printed Composite Coatings Of Conducting Polymers And Carbon Nanotubes On Titanium Bipolar Plates In Aqueous Asymmetrical Supercapacitors, Xiaohang Zhou, George Z. Chen Dec 2012

Electrochemical Performance Of Screen-Printed Composite Coatings Of Conducting Polymers And Carbon Nanotubes On Titanium Bipolar Plates In Aqueous Asymmetrical Supercapacitors, Xiaohang Zhou, George Z. Chen

Journal of Electrochemistry

Composites of conducting polymers (polypyrrole and polyaniline) with acid treated multi-walled carbon nanotubes were formulated into printable aqueous inks, with the aid of functional additives (benzethonium chloride as a surfactant with or without polyvinyl alcohol as a binder). The inks were screen-printed as fairly uniform coatings of various mass loading densities and areas (up to 75 mg cm-2 and 100 cm2) on thin titanium plates (0.1 mm in thickness). These screen-printed plates were used to fabricate both unit cell and multi-cell stack of asymmetrical supercapacitors with screen-printed negative electrodes of activated carbon (pigment black) in aqueous electrolytes …

Go to article

First Prev Next Last