Engineering Commons^™

Wear Property Of Machined Ultra High Molecular Weight Polyethylene (Uhmwpe) Acetabular Liner Product With Cnc Milling, W D. Lestari, A T. Danaryanto, A Nugroho, R Ismail, J Jamari, A P. Bayuseno

Journal of Mechanical Engineering Science and Technology (JMEST)

UHMWPE has been used as a cushion in artificial hip joint for the last decades. The reliability of the components of a hip joint implant can be achieved by understanding their wear behavior. This study observed the tribological performance of the UHMWPE acetabular liner manufactured with a CNC milling machine on the femoral head made of SS 316L. Materials commonly used for tribo pairs in hip joint replacement. The wear tests were performed on a hip joint simulator in dry condition. The wear test is carried out by applying a constant load of 800N. Before and after the wear test, …

Characterization Of Bacterial Nanocellulose - Graphite Nanoplatelets Composite Films, Bili Darnanto Susilo, Heru Suryanto, Aminnudin Aminnudin

Journal of Mechanical Engineering Science and Technology (JMEST)

Bacterial cellulose (BC) was synthesized from pineapple peel extract media with addition of fermentation agent bacteria Acetobacter xylinum. BC was disintegrated from the pellicle into bacterial nanocellulose (BNC) by using a high-pressure homogenizer (hph) machine, which has a three-dimensional woven nanofibrous network. The synthesis of composite films started when BNC, graphite nanoplatelets, and cetyltrimethylammonium bromide (CTAB) were homogenized using an ultrasonic homogenizer then baked on a glass mold at a temperature of 80 degrees Celcius for 14h. A scanning electron microscope (SEM) was used to analyze its morphology. X-Ray diffraction spectra were used to analyze the composite films structure. The …

Design Of Shielded Metal Arc Welding Parameters For Optimum Tensile Strength Using Taguchi Method, Moh. Dedy Setiawan, Yanuar Rohmat A. P. Pradana, Suprayitno Suprayitno

Journal of Mechanical Engineering Science and Technology (JMEST)

Shielded Metal Arc Welding (SMAW), an arc welding process, is widely used in applications. In practice, SMAW is widely applied to the welding process on hollow square pipe. Performance expected from this welding is the tensile strength of weld joint. The tensile strength is influenced by parameters process which have possibility for an optimization process to become ‘robust’. Robust is a design which less sensitive to the effect of uncertain quantities or noise factors. Taguchi method is the most efficient optimization method which accommodates the noise factors effect and requires less experiment. This study is focusing on optimizing the welding …

Comparative Studies On Combustion Characteristics Of Blended Crude Jatropha Oil With Magnetic Liquid Catalyst And Dex Under Normal Gravity Condition, Hendry Y. Nanlohy

Journal of Mechanical Engineering Science and Technology (JMEST)

A comparative study on the combustion characteristics of a single droplet fueled by DEX, crude jatropha oil (CJO), and a mixture of CJO with a magnetic liquid catalyst of rhodium trisulfate has been carried out under normal gravity conditions. The high viscosity of crude jatropha oil makes it difficult to burn under normal conditions (room temperature and atmospheric pressure), therefore the addition of a magnetic liquid catalyst rhodium trisulfate is needed to improve the properties of crude jatropha oil. As a catalyst, rhodium trisulfate has the potential to improve combustion performance while improving the physical properties of crude jatropha oil …

Effect Of Variations In Pyrolysis Reactor With Glass Wool Equipped And Without Glass Wool On The Weight Of The Oil Produced, I Gusti Ngurah Nitya Santhiarsa

Journal of Mechanical Engineering Science and Technology (JMEST)

Currently, plastic waste is a very serious threat because plastic waste pollution can harm all living things around and also harm the environment. The increasing volume of plastic waste is due to the lack of processing technology, so that the volume of plastic waste is increasing day by day. Plastic is a material that is difficult to decompose because it is non-biodegradable. One application of plastic waste processing technology offered in this study is to use the pyrolysis principle. Pyrolysis is a method of converting plastic into fuel oil through a thermal decomposition process without the use of oxygen. The …

Implementation Of Internet Of Things (Iot) In A Plastic Blow Moulding Machine And Its Performance Measurement, Muhammad F. Faqih, Mahros Darsin, Aris Z. Muttaqin, Danang Yudistiro

Journal of Mechanical Engineering Science and Technology (JMEST)

Efficiency and effectiveness are indispensable things in the production process. Accurate use of existing resources and the shorter cycle time of production are of particular concern to optimize the production process. This research aims to implement automation to a conventional blow molding. An advanced attempt was carried out to use the Internet of Things (IoT) to increase its efficiency while maintaining the quality of the products. The use of the nodeMCU microcontroller and the blynk application allows the operator to operate the machine without having to come into or having direct contact with the machine. The performance of automation and …

Study Of Methanol And Ethanol Absorption On Vacuum Temperature Of Adsorption Cooling Machine Adsorption Cycle, Jhon Sufriadi Purba, Jandri Fan Ht. Saragi

Journal of Mechanical Engineering Science and Technology (JMEST)

Cooling machines are currently being used more and more in accordance with technological advances and increasing living standards. Common uses are for preserving food, air conditioning, cooling beverages, for making ice cubes, and others. The need for cooling systems in remote areas for various needs such as preservation or storage of food ingredients is felt to be increasing, while the existing conventional cooling systems cannot necessarily be used because not all remote areas have electricity networks, so a simple adsorption cooling system is an alternative for solving problems. A cooling system needs in remote areas like this. The purpose of …

Spray Characteristics At Preheating Temperatur Of Diesel-Biodiesel-Gasoline Fuel Blend, Moch. Miftahul Arifin, Nasrul Ilminnafik, Agus Triono

Journal of Mechanical Engineering Science and Technology (JMEST)

Technological developments in diesel engines require improvements to the fuel injection system to meet the criteria for economical, high-power and efficient combustion and meet environmental regulatory standards. One method that has a lot of interest is changing the characteristics of the fuel, with the aim of producing optimal combustion. Spray characteristics have a big role in determining the quality of combustion in diesel engines. A good spray can improve the quality of fuel atomization and the homogeneity of the air-fuel mixture in the combustion chamber so that it can produce good engine performance and low emissions. This study aims to …

Coupling Methylammonium And Formamidinium Cations With Halide Anions: Hybrid Orbitals, Hydrogen Bonding, And The Role Of Dynamics, Chinnathambi Kamal, Dirk Hauschild, Linsey Seitz, Ralph Steininger, Wanli Yang, Clemens Heske, Lothar Weinhardt, Michael Odelius

Chemistry and Biochemistry Faculty Research

The electronic structures of four precursors for organic-inorganic hybrid perovskites, namely, methylammonium chloride and iodide, as well as formamidinium bromide and iodide, are investigated by X-ray emission (XE) spectroscopy at the carbon and nitrogen K-edges. The XE spectra are analyzed based on density functional theory calculations. We simulate the XE spectra at the Kohn-Sham level for ground-state geometries and carry out detailed analyses of the molecular orbitals and the electronic density of states to give a thorough understanding of the spectra. Major parts of the spectra can be described by the model of the corresponding isolated organic cation, whereas high-emission …

Autonomous Control And Signal Acquisition System, Rion Krampe

Scholars Week

Dr. Bunget has an autonomous control and signal acquisition system that he wants to be repaired and improved upon. This requires that we identify the current issues with the system and repair them as well as make innovations to the system to meet customer needs. The position control needs to be autonomous, and the acquisition of the oscilloscope signal and the transducer position needs to be synchronous. The user should be able to control the position, speed, and how often the signals are captured. The waveform of the scan should be appended into a spreadsheet. The system code also needs …

Quick - Release End Effector Tool Interface, Shane Farritor, Thomas Frederick

Department of Mechanical and Materials Engineering: Faculty Publications

The various embodiments herein relate to a coupling apparatus for a medical device having a coupler body, a cavity defined in the coupler body, a rotatable drive component disposed within the cavity and having at least two pin receiving openings, and an actuable locking ring disposed around the cavity.

Fatigue Damage Quantification And Life Estimation With Provision For Microstructure, Arash Pourbagheri Jirandehi

LSU Doctoral Dissertations

This dissertation provides methodologies for the quantification of different forms of fatigue damage by considering the role of microstructure. The laws of thermodynamics in conjunction with Finite Element Method (FEM) are utilized to devise thermodynamically-base frameworks for the estimation of cyclic damage in polycrystalline metals. Accordingly, a microstructure-sensitive platform for fatigue life estimation is introduced. The proposed framework is assessed for 3D printed metallic alloys at room and elevated temperatures. Further, it is used to analyze the fatigue performance difference between additively manufactured Inconel 718 in three print orientations. This research is of fundamental vital interest because it ensures that …

Electrochemical Synthesis Of P-(Β-Hydroxyethyl Sulfone) Aniline, Hao Guo, Dong-Fang Niu, Shuo-Zhen Hu, Xin-Sheng Zhang

Journal of Electrochemistry

Para-ester is the most important intermediate for the preparation of ethylene sulfone type reactive dyes, which is usually used in the dyeing of cellulose fibers and synthetic fibers. P-(β-hydroxyethyl sulfone) aniline is an important intermediate for the synthesis of para-ester. In this paper, p-(β-hydroxyethyl sulfone) aniline was prepared by electrochemical method, having the advantages of simple process, mild reaction condition, less environmental pollution, easy reaction control and so on. It has strong development potential and industrial application prospect. The electrochemical reduction of p-nitrophenyl-β-hydroxyethyl sulfone on a lead plate electrode to prepare p-(β-hydroxyethyl …

Mathematical Expression And Quantitative Analysis Of Impedance Spectrum On The Interface Of Glassy Carbon Electrode, Lei Cheng, Pu-Xuan Yan, You-Jun Fan, Hua-Hong Zou, Hong Liang

Journal of Electrochemistry

Glassy carbon electrode (GCE) is a common basic electrode for various electrochemical sensors, and the detection properties are determined by its interfacial characteristics. In this paper, we established an equivalent circuit including electrolyte resistance (R_el), charge transport resistance (R_ct), diffusion impedance (R_di, C_di), electrochemical (oxidation/reduction) reaction impedance (R_R, C_R), surface adsorption impedance (R_ads , C_ads), double-layer capacitance (C_DL), and derived the mathematical expression for the equivalent circuit. The R_el and C_DL are contributed by inactive …

Preparation Of Modified Titanium Based Pbo2 Electrode And Its Rapid Detection Of Cod, Qi Sun, Yan-He Han, Xiao-Lu Fu

Journal of Electrochemistry

In the traditional Ti/β-PbO₂ electrode, the crystal lattice difference between β-PbO₂ and Ti matrix is large, and the prepared electrode is easy to fall off and has a short service life. It needs to be modified in actual use. Based on the advantages of α-PbO₂ material and Ag material in terms of adhesion and conductivity, respectively, the above two materials are selected as the intermediate layer of Ti/β-PbO₂ electrode to improve electrode performance. In this paper, by preparing Ti/α/β-PbO₂ and Ti/Ag/β-PbO₂ electrodes …

Fundamentals Of Electrochemical Impedance Spectroscopy For Macrohomogeneous Porous Electrodes, Xiang Li, Qiu-An Huang, Wei-Heng Li, Yu-Xuan Bai, Jia Wang, Yang Liu, Yu-Feng Zhao, Juan Wang, Jiu-Jun Zhang

Journal of Electrochemistry

Electrochemical impedance spectroscopy (EIS) can be used to diagnose charge transfer reactions and mass transport in porous electrodes. The charge transfer reactions include interfacial charge accumulation and charge conduction as well as electrochemical reaction. In this paper, the complex phasor method is developed under the macrohomogeneous assumption to build an impedance model of porous electrodes for clarifying several vague expressions in the traditional approaches. The following researches are carried out: (1) Identifying characteristic parameters for the porous electrodes, including electrode electronic conductivity σ₁, electrolyte ionic conductivity σ₂, interface charge transfer conductivity g_ct, unit area …

Janus-Tinbco2 For Hydrogen Evolution Reaction With High Conductivity And Catalytic Activity, Li-Li Xu, Dong-Yan Ren, Xiao-Feng Zhao, Yong Yi

Journal of Electrochemistry

Exploring the potential hydrogen evolution reaction (HER) catalysts with the high activity and high conductivity has always been a hot spot in the research of renewable energy development. Ti₂C, as one of the 2D-MXene, has excellent properties relating to many active sites, mechanical stability, conductivity, etc., and has become a potential HER catalyst. However, the modification of the surface of Ti₂C by terminal O will reduce the conductivity, thereby limiting the transport of electrons between the valence band and the conduction band. In this study, an electric double layer Janus-TiNbCO₂ was constructed by Nb doping. …

Application Of Ti/Ruo2-Iro2-Sno2-Sb2O5 Anode In Rural Drinking Water Disinfection, Jing-Ru Guo, Xue-Jiao Zhang, Shuai Liao, Xue-Ming Chen

Journal of Electrochemistry

Sodium hypochlorite disinfection has many advantages, including reliable operation, low cost, easily available raw materials. It is, therefore, suitable for disinfection of drinking water in remote rural areas. The service life and chlorine evolution efficiency of the anode are the main factors restricting the performance of the sodium hypochlorite generator. The special conditions of frequent shutdown and low electrolyte concentration in the rural drinking water application also put forward high requirements on the performance of the anode. In this study, Ti/RuO₂-IrO₂-SnO₂-Sb₂O₅,a new-type and efficient chlorine evolution anode, was prepared by …

Synthesis Of Nickel Phosphide/Nitrogen Phosphorus Co-Doped Carbon And Its Application In Lithium Ion Batteries, Jian Hu, Yan-Shuang Meng, Qian-Ru Hu

Journal of Electrochemistry

In recent years, the nickel-based phosphide has drawn great attention because of its low intercalation/deintercalation platform and lower polarization compared to sulfides and oxides as anodes for next-generation high-energy lithium-ion batteries. The Ni₂P anode can deliver high theoretical specific capacity of 542 mAh·g^-1, but it subject to a conversion reaction mechanism, which make them unsuitable for commercial applications. The agglomeration of Ni₂P nanoparticles during material fabrication and the structural deterioration of electrode associated with large volume change during charge-discharge process lead to poor cycle stability and low utilization of active materials. Meanwhile, the low …

Performance And Mechanism Of PtXCuY/C Electrocatalyst For Methanol Oxidation, Jia Tang, Xiao-Ming Zhang, Shan-Sheng Yu, Su-Li Wang, Gong-Quan Sun

Journal of Electrochemistry

Direct methanol fuel cell (DMFC), which directly converts the chemical energy of methanol fuel into electrical energy, has the advantages of high energy conversion efficiency, environmental friendliness, and abundance of fuel sources. DMFC is considered as the promising substitutes in the field of portable devices, military applications, and stationary power stations, while the broad application is severely hindered by the sluggish kinetic of methanol oxidation reaction (MOR) in the anode and the high cost of platinum (Pt)-based anodic electrocatalysts. Herein, a series of carbon supported Pt_xCu_y (Pt_xCu_y/C) binary metal electrocatalysts, featured with high …

Effect Of Alkyl Chain Length Of Symmetrical Quaternary Ammonium Hydroxide On Oxalic Acid Electroreduction Reaction, Bo Huang, Xin-Sheng Zhang, Dong-Fang Niu, Shuo-Zhen Hu

Journal of Electrochemistry

Glyoxylic acid with the dual characteristics of acid and aldehyde is an important chemical raw material and organic synthesis intermediate, which is extensively used in the perfumery, pharmaceutical and fine chemical industries. A family of symmetric quaternary ammonium hydroxides (QAHs) with different alkyl chain lengths was used as the additives in generating glyoxylic acid from oxalic acid electroreduction reaction (OAER). The effects of alkyl chain length on OAER and the corresponding side reaction, i.e., hydrogen evolution reaction (HER), were investigated. Linear sweep voltammetric (LSV) results showed that the adsorption of the additives suppressed more on the HER than that on …

Optimization In The Application Of Varnishes Barrier On Cartonboard Packaging, Andre Ramalheiro De Andrade, Maria Isabel Rodrigues Phd, Eduardo Luiz Machado Phd

Journal of Applied Packaging Research

In this work adjustments in the rotogravure printing process are proposed to the varnish water vapor transmission rate (WVTR) aiming to obtain results smaller than 20g/m²/24h. One case study was used for the propositions for improvements, where focused on varnish application process in a gravure printer for an eight-printing unit cartonboard packaging, maximum printing speed of 175 m/min and a 285 g/m² weight cartonboard. The possible variables that influenced the WVTR result were selected from the technical expertise of the people involved in the project, the analysis in the printing process with the application of directed trials using experimental designs …

Method Of Making Temperature-Immune Self-Referencing Fabry–Pérot Cavity Sensors, Hengky Chandrahalim, Jonathan W. Smith

AFIT Patents

A method of making passive microscopic Fabry-Pérot Interferometer (FPI) sensor includes forming a three-dimensional microscopic optical structure on a cleaved tip of an optical fiber that reflects a light signal back through the optical fiber. The reflected light is altered by refractive index changes in the three-dimensional structure that is subject to at least one of: (i) thermal radiation; and (ii) volatile organic compounds.

In Situ Characterization Of Tensile Behavior Of Laser Rapid Solidified Al–Si Heterogeneous Microstructures, Bingqiang Wei, Wenqian Wu, Dongyue Xie, Huai-Hsun Lien, Metin Kayitmazbatir, Amit Misra, Jian Wang

Department of Mechanical and Materials Engineering: Faculty Publications

Heterogeneous Al–Si microstructure comprising of sub-micron-scale Al dendrites and nanoscale Al–Si fibrous eutectic was fabricated by processing as-cast Al-20wt.%Si alloy using laser rapid solidification. In situ tension tests explored high tensile strength ( ∼ 600 MPa) and ductility ( ∼ 10%) and high strain hardening rate ( ∼ 7 GPa). Microstructural characterization revealed the plastic co[1]deformation mechanisms between soft Al dendrites and hard nanoscale Al–Si eutectic. The progression of plasticity in nanoscale Al–Si eutectic with increasing applied strain is accommodated by dislocation plasticity in the nano-Al channels and cracking Si nanofibers. The propagation of nano-cracks is suppressed by surrounding Al, …

Digitally Twinned Additive Manufacturing: Detecting Flaws In Laser Powder Bed Fusion By Combining Thermal Simulations With In-Situmeltpool Sensor Data, R Yavari, A Riensche, E Tekerek, L Jacquemetton, H Halliday, M Vandever, A Tenequer, V Perumal, A Kontsos, Z Smoqi, K Cole, P Rao

Department of Mechanical and Materials Engineering: Faculty Publications

The goal of this research is the in-situ detection of flaw formation in metal parts made using the laser powder bed fusion (LPBF) additive manufacturing process. This is an important area of research, because, despite the considerable cost and time savings achieved, precision-driven industries, such as aerospace and biomedical, are reticent in using LPBF to make safety–critical parts due to tendency of the process to create flaws. Another emerging concern in LPBF, and additive manufacturing in general, is related to cyber security – malicious actors may tamper with the process or plant flaws inside a part to compromise its performance. …

Influence Of Sulfur Modification On The Properties Of Sulfur Concrete, Zhavkhar Khayitova, Khasan Beknazarov, Hayit Turaev, Abdulakhat Jalilov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this study is the synthesis and study of modified sulfur concrete for use in industrial construction. To achieve this goal, sulfur concrete based on gossypol resin and pyrolysis distillate was modified and studied. The strength properties of sulfur-based concrete obtained from sulfur modified with gossypol resin and pyrolysis distillate were investigated. For the addition to sulfur concrete, industrial waste was used as a finely dispersed filler - fly ash from the Angren TPP and phosphogypsum generated at Ammophos-Maxam JSC. It was found that the best strength results correspond to sulfur-based concrete modified with gossypol resin using an …

Transforming Technology & Engineering Educator Inputs Into Desired Student Outputs Through Mechanism Analysis And Synthesis, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

The intention of this article is to provide middle and high school Technology and Engineering Educators (T&EEs) with a more thorough understanding of an engineering approach to the teaching and learning of mechanics. During the teaching and learning of engineering content, in this case mechanics, the educator should attempt to align pedagogical content knowledge with engineering content knowledge and practices. T&EEs will also need to focus on terminology, structure, and applying theory to practical hands-on learning activities inside and outside of the classroom. T&EEs have the potential to foster middle and high school students’ mechanical knowledge and the ability to …

Me-Em 2020-21 Annual Report, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering Annual Reports

Table of Contents

• Responsive Research
• Alumni Impact
• Innovative Enterprises
• Enrollment & Degrees
• Graduates
• Department
• Donors
• Contracts & Grants
• Patents & Publications

Me-Em Enewsbrief, September 2021, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Justification Of The Main Parameters And Operating Modes Of The Crushers-Shredders Of Coarse Feed, K.D. Astanakulov, F.U. Karshiev, Sh.Kh. Gapparov

Irrigation and Melioration

The article presents the results of research on the justification of the parameters of the working bodies and operating modes of the mini crushers-shredders of coarse feed. On the basis of experimental research to study the effect of the rotor parameters Mini Crusher its qualitative performance indicators. According to the teachings found that rational parametres and operating modes-Crusher are: rotor length 350 mm; rotor diameter 550 mm; rotor speed 1290 min-1; the number of hammers 20 pcs; angle of rotation of the hammers 60.