Engineering Commons^™

Dynamic Response Of Elastic Two-Story Steel Moment Frame Scaled Structure Equipped With Viscous Dampers, Garrett L. Barker, Alexander L. Poirier

Architectural Engineering

The authors of this report are Architectural Engineering undergraduate students at California Polytechnic State University, San Luis Obispo. Damping is a complex, experimentally derived value that is affected by many structural properties and has a profound effect on the dynamic response of structures. Deducing the inherent damping of a steel moment frame and affecting the damping ratio with viscous dampers are two topics explored in this paper. Dampers are commonly implemented in resilient structures that perform better in a design basis earthquake, reducing the seismic cost and downtime. Undergraduate coursework does not delve into the factors that affect damping and …

Evaluating The Effects Of Granulated Rubber And Glass Fibers In Polymer Concrete As A Structural Material For Wafer Grinding Machines, Kevin Gabriel Kuehn, Philip Randall Streeter

Materials Engineering

Polymer concrete is a composite material used to replace cast iron and steel in wafer grinding machines for vibration damping. During the grinding and lapping processes of manufacturing silicon wafers, excessive vibrations may cause subsurface damage which requires additional polishing and reduces yield. Nine compositions containing various levels of granulated rubber and glass fibers were manufactured. CRM WRF-10 granulated rubber was examined at 0%, 5%, and 10% and Corning Cem-Fil glass fibers were added at 0%, 0.5%, and 1% by weight. Smooth-On EpoxAcast 690 epoxy resin was held constant at 16% for each composition. Crushed granite aggregate from Martin Marietta, …

Me-Em Enewsbrief, June 2022, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

In-Situ Defect Detection Using Acoustic Vibration Monitoring For Additive Manufacturing Processes, Ali Harake

Master's Theses

The world of additive manufacturing revolves around speed and repeatability. Inherently, the process of 3D printing is plagued with variability that fluctuates with every material and parameter modification. Without proper qualification standards, processes can never become stable enough to produce parts that may be used in aerospace, medical, and construction industries. These industries rely on high quality metrics in order to protect the lives of those who may benefit from them. To establish trust in a process, all points of variation must be controlled and accounted for every part produced. In instances where even the best process controls are enacted, …

Investigation Of Topological Phonons In Acoustic Metamaterials, Wenting Cheng

Dissertations

Topological acoustics is a recent and intense area of research. It merges the knowledge of mathematical topology, condensed matter physics, and acoustics. At the same time, it has been pointed out that quasiperiodicity can greatly enhance the periodic table of topological systems. Because quasiperiodic patterns have an intrinsic global degree of freedom, which exists in the topological space called the hull of a pattern, where the shape traced in this topological space is called the phason. The hull augments the physical space, which opens a door to the physics of the integer quantum Hall effect (IQHE) in arbitrary dimensions. In …

Monolithic Integration Of Hybrid Perovskite Single Crystals With Silicon For Highly Sensitive X - Ray Detectors, Jinsong Huang, Wei Wei

Department of Mechanical and Materials Engineering: Faculty Publications

Perovskite single crystal X - ray radiation detector devices including an X - ray wavelength - responsive active layer including an organolead trihalide perovskite single crystal, a substrate layer comprising an oxide, and a binding layer disposed between the active layer and the substrate layer. The binding layer including a binding molecule having a first functional group that bonds to the organolead trihalide perovskite single crystal and a second functional bonds with the oxide. Inclusion of the binding layer advantageously reduces device noise while retaining signal intensity.

Electrochemical Synthesis Of Acetylpyrazine, Lin Mao, Dong-Fang Niu, Shuo-Zhen Hu, Xin-Sheng Zhang

Journal of Electrochemistry

Acetylpyrazine is naturally presented in hazelnuts, peanuts, and sesame seeds. As an important food additive, it is widely used in baked foods, meat, sesame and tobacco. At the same time, acetylpyrazine is also an important pharmaceutical intermediate, which is used in the syntheses of anti-tuberculosis drugs, anti-tumor, anti-malaria, anti-viral, antibacterial and treatments of epilepsy, pain and Parkinson’s drugs. At present, the synthesis methods of acetylpyrazine include oxidation method, multi-step method and Grignard reagent method, which have the disadvantages of low yield, cumbersome process, severe reaction conditions and high cost. In this study, acetylation of pyrazine was used to synthesize acetylpyrazine …

Electrochemical Voltammetric Behavior Of Sulfur Mustard On The Bare Pt Electrode, Yu-Lin Yang, Jie Sun, Tian Zhou, Ji-Gang Li, Shou-Ping Wei

Journal of Electrochemistry

The sulfur mustard (bis(2-chloroethyl) sulphide, HD), one of highly toxic chemical weapon agents, can damage the alive tissue cells (such as skin, lung, respiratory mucosa and so on), and cause carcinogenic and mutagenic effects for a long time exposure, which imposes a great threat not only to the human health, but also to the sustainable development of the society. With its convenience, high sensitivity and rapid response, electrochemical technology exhibits considerable potential in the field-deployed detection toward HD, but the related reports are rare. Herein, the electrochemical behavior of HD on the bare Pt electrode was investigated by electrochemical measurements, …

Electrocatalytic "Volcano-Type" Effect Of Nano-Tio2 (A)/(R) Phase Content In Pt/Tio2-CnX Catalyst, Ai-Lin Cui, Yang Bai, Hong-Ying Yu, Hui-Min Meng

Journal of Electrochemistry

The relationship between the electrochemical activity of fuel cell catalysts and Pt particle size, as well as the catalyst support and co-catalyst is still unclear. In this work, FESEM, XRD, BET, TEM and CV techniques were adopted to investigate the effects of TiO₂ anatase (A)/rutile (R) phases content on the electrochemical activity of Pt electrocatalyst. The results showed that the anatase-rutile phase transformation occurred during the heat treatment of TiO₂ at 700 ~ 900 ^oC accompanied by the growth of two-phase crystalline size, and anatase was completely transformed into rutile at 900 ^oC. TEM results revealed …

Study And Improvement On Expansion Property Of Silicon Oxide, Wei-Chuan Qiao, Fang-Ru Li, Jin-Lin Xiao, Li-Juan Qu, Xiao Zhao, Meng Zhang, Chun-Lei Pang, Zi-Kun Li, Jian-Guo Ren, Xue-Qin He

Journal of Electrochemistry

The silicon-based anode materials have the potential to meet the ever-increasing demand for energy density in lithium-ion batteries market owing to their high theoretical specific capacity. Unfortunately, their commercialization was hindered by the continuous volume expansion. Herein, the expansion characteristics and corresponding mechanism of the silicon oxide and graphite-silicon oxide composites were investigated by in-situ displacement detection systematically. The results showed that the expansion property was improved by material process modifications. During the de/lithiation processes of graphite, the expansion ratio in 30% ~ 50% SOC changed little because of the small interlayer spacing variation of the intercalated graphite. …

Effect Of Chloride Ion On Electrochemical Behavior Of Silver Electrodeposition In Chcl-Urea Low Eutectic Solvent, Chong-Bo Zhan, Run-Jia Zhang, Xu Fu, Hai-Jing Sun, Xin Zhou, Bao-Jie Wang, Jie Sun

Journal of Electrochemistry

Metallic silver coating has been widely used in the fields of microelectronics industry, catalyst, sensor and preparation of magnetoresistive materials because of its excellent corrosion resistance, good lubricity, high conductivity, excellent decoration and high catalysis. Compared with the traditional aqueous solution system, the research on metal electrodeposition in ionic liquid system is developing rapidly. In addition, additives are the key factors in the silver plating process. Adding a small amount of organic or inorganic additives to the plating solution will significantly change the coating properties, such as improving brightness, hardness and ductility. In this paper, using choline chloride urea (ChCl-Urea) …

Preparation And Properties Of Gcp-Supported Palladium Particles Composite Towards Electrochemical Ammonia Synthesis, Ying-Chao Wang, Zi-Zai Ma, Yi-Fan Wu, Xiao-Guang Wang

Journal of Electrochemistry

Ammonia (NH₃) plays an essential role in agriculture and modern industries. Electrochemical fixation of nitrogen (N₂) to ammonia (NRR) under ambient conditions with renewable electricity is a promising strategy to replace the industrial Haber-Bosch method. However, it usually suffers from extremely poor ammonia yield and low Faraday efficiency due to the poor electrocatalysts. Therefore, intensive studies have been devoted to developing efficient NRR catalysts till now. Among them, palladium (Pd) can capture protons in the aqueous phase to form stable α-PdH, which balances the competitive adsorption between nitrogen and protons as well as reduces the …

Simultaneous Hydrogen And (Nh4)2So4 Productions From Desulfurization Wastewater Electrolysis Using Mea Electrolyser, Ju-Cai Wei, Lin Shi, Xu Wu

Journal of Electrochemistry

It is preferred to simultaneously recover resource and energy from waster. Sulfur dioxide, SO₂, a common air pollutant, a potential energy resource, is a key link to sulfur nature circulation. SO₂ can be conversed to NH₄HSO₃ and (NH₄)₂SO₃ during the ammonia desulfurization process, which can be used to produce (NH₄)₂SO₄ fertilizer. For high quality (NH₄)₂SO₄ fertilizer and high heat transfer efficiency of the evaporative crystallization, HSO₃^- or SO₃^2- needs to be oxidized to form SO …

A Review Of Current Construction Guidelines To Inform The Design Of Rammed Earth Houses In Seismically Active Zones, David Thompson, Charles Augarde, Juan Pablo Osorio

Articles

Sustainability in the materials we use for construction is a prime concern, focusing on reducing the embodied energy and carbon footprints of the materials used. The cement used in concrete products is responsible for a significant proportion of Man's CO2 emissions and its production requires substantial energy input, as do fired clay products. For this reason, products formed from unfired earthen materials are of increasing interest and the current challenges include devising means of robust design for strength and to address durability concerns. One form of earthen construction that employs an in-situ method is rammed earth, and it is a …

Passivation Of Defects In Perovskite Materials For Improved Solar Cell Efficiency And Stability, Jinsong Huang, Xiaopeng Zheng

Department of Mechanical and Materials Engineering: Faculty Publications

Semiconductor devices , and methods of forming the same , include a cathode layer , an anode layer , and an active layer disposed between the cathode layer and the anode layer , wherein the active layer includes a perovskite layer . A passivation layer is disposed directly on a surface of the active layer between the cathode layer and the active layer , the passivation layer including a layer of material that passivates both cationic and anionic defects in the surface of the active layer .

Challenges And Signal Processing Of High Strain Rate Mechanical Testing, Barae Lamdini

Theses and Dissertations

Dynamic testing provides valuable insight into the behavior of materials undergoing fast deformation. During Split-Hopkinson Pressure Bar testing, stress waves are measured using strain gauges as voltage variations that are usually very small. Therefore, an amplifier is required to amplify the data and analyze it. One of the few available amplifiers designed for this purpose is provided by Vishay Micro-Measurements which limits the user’s options when it comes to research or industry. Among the challenges of implementing the Hopkinson technology in the industry are the size and cost of the amplifier. In this work, we propose a novel design of …

Monolithically Integrated Microscale Pressure Sensor On An Optical Fiber Tip, Jeremiah C. Williams, Hengky Chandrahalim

AFIT Patents

A passive microscopic Fabry-Pérot Interferometer (FPI) pressure sensor includes an optical fiber and a three-dimensional microscopic optical enclosure. The three-dimensional microscopic optical enclosure includes tubular side walls having lateral pleated corrugations and attached to a cleaved tip of the optical fiber to receive a light signal. An optically reflecting end wall is distally engaged to the tubular side walls to enclose a trapped quantity of gas that longitudinally positions the optically reflecting end wall in relation to ambient air pressure, changing a distance traveled by a light signal reflected back through the optical fiber.

Electromechanical Fatigue Properties Of Dielectric Elastomer Stretch Sensors Under Orthopaedic Loading Conditions, Andrea Karen Persons

Theses and Dissertations

Fatigue testing of stretch sensors often focuses on high amplitude, low-cycle fatigue (LCF) behavior; however, when used for orthopaedic, athletic, or ergonomic assessments, stretch sensors are subjected to low amplitude, high-cycle fatigue (HCF) conditions. As an added layer of complexity, the fatigue testing of stretch sensors is not only focused on the life of the material comprising the sensor, but also on the reliability of the signal produced during the extension and relaxation of the sensor. Research into the development of a smart sock that can be used to measure the range of motion (ROM) of the ankle joint during …

3d Printing Of Piezoelectric Materials And Devices, Dominic Polletta, Zack Myrtle

Thinking Matters Symposium

The design goal of the project is to use a stock 3D printer to 3D print materials with piezoelectric properties by adding Barium Titanate nanoparticles to the UV resin. The result of the printed material will be a device that will produce a charge when subjected to vibrations or stress. These printed devices can be used as microphones and other vibration sensors in a variety of applications. This process will be achieved by modifying the 3D printer by changing the film in the resin vat of the printer with a conductive film. This will allow for applied voltage to create …

Measuring The Electrical Properties Of 3d Printed Plastics In The W-Band, Noah Gregory

Electrical Engineering Undergraduate Honors Theses

3D printers are a method of additive manufacturing that consists of layering material to produce a 3D structure. There are many types of 3D printers as well as many types of materials that are capable of being printed with. The most cost-effective and well documented method of 3D printing is called Fused Deposition Modeling (FDM). FDM printers work by feeding a thin strand of plastic filament through a heated extruder nozzle. This plastic is then deposited on a flat, typically heated, surface called a print bed. The part is then built by depositing thin layers of plastic in the shape …

Ultrahigh Strength-High Ductility Combination Low Density Austenitic Steel: Effect Of Aging Temperature And Strain Rate, Jaehyun Kim

Open Access Theses & Dissertations

The objective of the study was to optimize the post-thermal treatment of hot rolled Fe-0.92C-26.3Mn-8.79Al-0.05Nb steel. In this regard, the hardness of the experimental steel was studied as a function of aging time and/or strain rate. The study provided an understanding of aging heat treatment for the experimental steel, which was processed by vacuum induction melting, followed by thermo-mechanical rolling involving multiple passes. The rolled steel was subsequently annealed at 900 °C for 4 h followed by water quenching. X-ray diffraction in scanning mode of 2¸=20-100o indicated the presence of austenite structure. In order to study the influence of aging …

Additive Manufacturing Of Variable Contrast Computed Tomography Anatomical Phantoms Using A Single Feedstock In Fused Filament Fabrication, Cory J. Darling

LSU New Orleans Theses and Dissertations

Anatomical phantoms used in biomedical education and training benefit greatly from Fused filament fabrication’s (FFF) ability to rapidly produce complex and unique models. Current materials and methods used in FFF have limited ability to accurately produce phantoms that can mimic the radiological properties of multiple biological tissues. This research demonstrates that the CT contrast of FFF produced models can be modified by varying the concentration of bismuth oxide in acrylonitrile butadiene styrene (ABS) filaments and a tunable CT contrast that mimics the CT contrast ranging from fatty tissue to cortical bone using a single composite filament without introducing artificial image …

Phonon Thermodynamics Of Bcc Zirconium With Machine Learning, Vanessa Judith Meraz

Open Access Theses & Dissertations

First principles-based simulations have allowed us to explore emerging phenomena in a variety of systems. Its steadfast practicality has led to an increase in molecular and materials design ranging from drug discovery to planetary formation. However ubiquitous in its field, one of its biggest drawbacks is its computational cost, notably so in molecular dynamics simulations. To counter this setback, there have been many leading efforts in machine learning methods, whether it be in algorithms or network architectures. Our contribution uses an active learning algorithm paired with a tensor field network, e3nn. By steadily feeding new data points to our model, …

Suitability Of Low-Cost Additive Manufacturing For Polymer Electrolyte Fuel Cells, David Alexander

Open Access Theses & Dissertations

The purpose of this dissertation is to study the feasibility of low-cost additive manufacturing to fabricate polymer electrolyte fuel cell bipolar plate materials. Traditional manufacturing techniques include molding, milling, hollow embossing, hydro-forming, rolling, and electromagnetic forming. These processes are employed when a design has been selected due to higher costs at low volumes. The combination of high initial costs and bipolar plates being the most expensive component of the polymer electrolyte fuel cell creates incentive to mitigate this obstacle. The feasibility of low-cost additive manufactured bipolar plates will be proven by fabrication, post-processing, and characterization of printed test specimen. The …

Rational Design Of Composite Nanomaterials For Water Treatment Applications, Mariana Marcos-Hernandez

Open Access Theses & Dissertations

Water quantity and quality have been affected in communities all around the world due to population growth, pollution, changes in land use, and climate change. In order to cope with existing and anticipated water demands and shortages, the use of treated or reclaimed water is an ongoing alternative that has helped communities all over the world address this problem. The adaptation of nanotechnology to traditional water and wastewater treatment processes offers new opportunities in technological developments. Unique size-dependent properties such as: high surface to mass ratio, high reactivity, high sorption capacities, fast dissolution, superparamagnetism, among others, provide high-tech efficient materials …

Evolution Of The Magnetic Properties On Van Der Waals Layered Magnets Via Pressure And Proton Irradiation, Rubyann Olmos

Open Access Theses & Dissertations

Probing the magnetism in quasi two-dimensional materials has the potential in driving their properties towards future use in spin electronic based devices. Studying such layered magnets will enable the scientific community to uncover tunable exotic phases such as superconductivity, quantum paramagnetism, etc. This work examines the influence of two types of external perturbations, namely, the pressure and proton irradiation, on the magnetic properties of several compounds in the van der Waals crystal family.

Pressure has been found to induce structural and magnetic phase transitions in many of these materials. Using hydrostatic pressure as a disorderless approach to manipulate the interlayer …

Investigation Of Refractory High Entropy Alloys For Extreme Environment Applications, Rebecca Alexandra Romero

Open Access Theses & Dissertations

High entropy alloys (HEAs) have emerged as an exciting class of materials with the potential for a wide range of structural, high-temperature applications. HEAs may be defined on a compositional basis as five or more principal elements in equimolar ratios. This definition led to the term “high entropy” due to the high configurational entropy which is obtained with principal elements in these amounts. The combination of elements has contributed to materials that may favor solid-solution phases over intermetallic phases and have the potential to possess highly desired material properties including high yield and creep strength. The inclusion of refractory metals …

Material Synthesis And Machine Learning For Additive Manufacturing, Jaime Eduardo Regis

Open Access Theses & Dissertations

The goal of this research was to address three key challenges in additive manufacturing (AM), the need for feedstock material, minimal end-use fabrication from lack of functionality in commercially available materials, and the need for qualification and property prediction in printed structures. The near ultraviolet-light assisted green reduction of graphene oxide through L-ascorbic acid was studied with to address the issue of low part strength in additively manufactured parts by providing a functional filler that can strengthen the polymer matrix. The synthesis of self-healing epoxy vitrimers was done to adapt high strength materials with recyclable properties for compatibility with AM …

Insole Fall Prevention Device, Nick M. Hughes, Andrew M. Slaboda

Biomedical Engineering

Falls among the aging population occur every single day, with 1 in every 5 resulting in some injury and 300,000 hospitalized every year with a hip fracture [1]. The most popular and effective way to mitigate these falls is through physical therapist intervention. However, with the increased popularity in telerehab, many patients at risk for falls cannot accurately convey their gait tendencies to their physical therapists from the comfort of their home or while not in direct contact with the PT. A device like an insole, implanted with force sensors, which measures different parts of a patient’s foot, could convey …

Crystal Growth And Property Tuning Of Layered Magnetic Topological Semimetals, Krishna Pandey

Graduate Theses and Dissertations

The demand for energy-efficient devices has been growing rapidly due to the need for data-driven technologies and the global energy crisis. As device size approaches the atomic scale, the miniaturization of electronic devices may stop in the near future unless fundamentally new materials or device concepts are developed. The emergent topological materials with exotic properties show remarkable robustness against crystal lattice defects, which are promising for next-generation technology. These materials host exotic properties such as high mobility, large magnetoresistance, chiral anomaly, and surface Fermi arcs, etc. Among various topological materials, the ZrSiS-family materials exhibit two types of Dirac states, which …