Engineering Commons^™

Development Of An Automated Electronic Prototyping System, Cesar Yahir Sanchez Zambrano

Open Access Theses & Dissertations

Prototyping systems with interconnected components can be a time and resource expensive process. The process consists of three main phases (design, build and analysis) with each having their own associated cost. For the case of electronic circuits, the building phase is the costliest phase among the three, being prone to human errors which causes the circuit to fail. All three phases of the prototyping process are important. However, often a disproportionate amount of time is spent on the build phase due to the difficulty of making and troubleshooting circuits by hand. In this thesis we will discuss a system that …

Goes-16 Level 2 Land Surface Temperature Product-Filling For Cloud Masked Data, Guadalupe Ortega

Open Access Theses & Dissertations

The GOES-16 satellite ground segment team develops different levels of environmental products and makes them readily available to the public. The level 2 Land Surface Temperature (LST) product aims to provide a remote measurement of the Earth’s surface temperature every hour. LST is of fundamental importance to many aspects of the geosciences, for example, to study the Urban Heat Islands (UHI) effect. The product however, does not provide values for pixels where the satellite imager’s view is obstructed by clouds, as determined by a cloud mask intermediate product. The objective of this thesis is to estimate LST in the cloud …

Synthesis And Characterization Of Tin (Sn) Incorporated Ga2o3, Guillermo Nicolas Gutierrez

Open Access Theses & Dissertations

In this work, we report on the synthesis, characterization of tin (Sn) incorporated gallium oxide Ga2O3 compounds, also included in this work is the effect of tin concentration related to the optical and electrochemical properties. The Sn incorporation into Ga2O3 creates a significant reduction in the bandgap and causes a nonlinear optical activity as the concentration varies. Substantial investigation performed to the structure, phase, and morphology of the mixed compounds governed by the stoichiometry equation Ga2−2xSnxO3-ɗ indicates that the Sn incorporation from 0.00 ≤ x ≤ 0.30 has a significant effect on these properties. To synthesize the Ga-Sn-O compounds a …

Evaluation Of Varying Graphene Oxides Through Their Physicochemical Characterizations On Erythrocytes, Hs27 Cells, Escherichia Coli And Staphylococcus Aureus Bacteria Cell Lines, To Assess Graphene Oxides Cytotoxicity., Miriam Montana

Open Access Theses & Dissertations

Research on the toxicity of Graphene Oxides (GO) has captivated interest in the field of material science, environmental sciences, and medicine for their avail significance in biomedical engineer applications either as integrates, enhancements, or in the making of medical devices. Moreover, there is still a lack of understanding as to what characteristics on GOs causes them to be cytotoxic at a cellular level. In our study we synthesized four different GOs by varying in both the method used for oxidation (Modified Hummer’s method & Improved Marcano-Tour’s method), and the precursor parent graphite, for a standardization approach to aid in the …

Radio Direction Finding Implementing Music Algorithm With Usrp Node Arrays, Kevin Valdez

Open Access Theses & Dissertations

Direction Finding techniques are widely used across the fields of radar, telecommunications, geolocation systems, sonar, among many others to estimate the reference position of the incoming signal source. For this, the implementation of antenna arrays is essential as it allows the use of more advanced techniques in signal processing called spatial spectrum estimation [1]. This method of estimation is performed based on the antenna or sensor array response to the signal spatial parameters in every direction and estimate the location of the incoming signals. Algorithms have been developed for the purpose of spatial spectrum analysis, the most popular are MUSIC …

Cell Bioprinting: A Novel Approach For Alpha Cell To Beta Cell Transdifferentiation, Atzimba Casas

Open Access Theses & Dissertations

Diabetes is a chronic disease that occurs in the body when the pancreas fails to either produce insulin (TID) or does not effectively use the insulin produced (TIID) and poses further health complications as well as an insurmountable economic impact.[1] Type I diabetes is an autoimmune disease characterized by a deficient amount of insulin production on account of the body’s immune system destroying its own β-cells.[2] Current diabetes treatment methods include the administration of insulin via injections or islet transplantation therapy. However, although both are viable options, they come with limitations that make the managing of this disease difficult. It …

Development Of Metaheuristic Algorithms For The Efficient Allocation Of Power Flow Control Devices, Eduardo Jose Castillo Fatule

Open Access Theses & Dissertations

Modern energy grids have become extremely complex systems, requiring more variable and active flow control. As a remedy to this, Distributed Flexible AC Transmission Systems (D-FACTS) are cost-efficient devices used to mitigate power flow congestion and integrate renewable energies. The objective of this research is then to propose an efficient multiple objective evolutionary algorithm to solve a stochastic model for D-FACTS allocation, which aims to optimize various objectives related to cost, grid health, and environmental impacts. The model was implemented on a modified RTS-96 test system, and the results show that optimally allocating D-FACTS modules using the proposed model can …

Small Satellite Development And Mission Design For Low Earth Orbit And Geostationary Transfer Orbit Missions, Ashiqur Rahman

Open Access Theses & Dissertations

Aerospace Center formerly known as cSETR at UTEP is a NASA funded center of excellence in aerospace and exploration, focusing on strategic capability development in propulsion and robotic lander, lunar surface exploration, and small spacecraft technologies. To support the center’s mission for space exploration and to demonstrate advancements in small satellite technologies, the Aerospace Center at The University of Texas at El Paso is on track to develop and launch several CubeSats in next few years. A CubeSat is a small satellite that has become popular in recent years due to their low cost, low complexity and short development timeline. …

Downscaling Of Goes-16'S Land Surface Temperature Product Using Epitomes, Roberto Garcia

Open Access Theses & Dissertations

Land surface temperature (LST) is an environmental variable derived from thermal infrared (TIR) imagery. Satellite platforms are a good source of TIR imagery because of their ability to provide widespread and frequent coverage of the Earthâ??s surface. It is common that a single satellite remote sensing platform is able to provide images with good spatial resolution or temporal resolution but not both. LST is an important parameter for studies on the urban heat island (UHI) effect. These studies are limited by the spatial or temporal resolutions of available LST products. This Thesis presents an algorithm to estimate land surface temperature …

Non-Invasive In-Vitro Glucose Monitoring Using Optical Sensor And Machine Learning Techniques For Diabetes Applications, Maryamsadat Shokrekhodaei

Open Access Theses & Dissertations

Diabetes is a major public health challenge affecting more than 451 million people. Physiological and experimental factors influence the accuracy of non-invasive glucose monitoring, and these need to be addressed before replacing the finger prick method with a non-invasive glucose measurement technique. Also, the suitable employment of machine learning techniques on experimental data can significantly improve the accuracy of glucose predictions.

This work includes the design, development, testing and data analysis of an optical based sensor for glucose measurements. The feasibility of non-invasive measurement of glucose within aqueous solutions that assimilate the composition of human blood plasma is investigated. The …

Fast Magnetic Resonance Image Reconstruction With Deep Learning Using An Efficientnet Encoder, Tahsin Rahman

Open Access Theses & Dissertations

This thesis aims to develop an efficient, deep network based method for Magnetic Resonance Imaging (MRI) acceleration through undersampled MR image reconstruction. Deep Neural Networks, particularly Deep Convolutional Networks, have been demonstrated to be highly effective in a wide variety of computer vision tasks, including MRI reconstruction. However, modern highly efficient encoder structures, such as the EfficientNet can potentially reduce reconstruction times further while improving reconstruction quality. To that end, we have developed a multi-channel U-Net MRI reconstruction network which uses an EfficientNet encoder and a custom asymmetric. The network was trained and tested using 5x undersampled multi-channel brain MR …

Hardware For Quantized Mixed-Precision Deep Neural Networks, Andres Rios

Open Access Theses & Dissertations

Recently, there has been a push to perform deep learning (DL) computations on the edge rather than the cloud due to latency, network connectivity, energy consumption, and privacy issues. However, state-of-the-art deep neural networks (DNNs) require vast amounts of computational power, data, and energyâ??resources that are limited on edge devices. This limitation has brought the need to design domain-specific architectures (DSAs) that implement DL-specific hardware optimizations. Traditionally DNNs have run on 32-bit floating-point numbers; however, a body of research has shown that DNNs are surprisingly robust and do not require all 32 bits. Instead, using quantization, networks can run on …

Discrepancy-Based Analysis Of Measurement Sampling Points In Compressive Sensing, Felipe Batista Da Silva

Open Access Theses & Dissertations

Compressive sensing (CS) is a technique in signal processing that under certain conditions allows someone to reconstruct sparse signals from fewer linear measurements. A problem in CS is modeled in terms of an underdetermined linear system, whose associated matrix is previously designed. Then, it is of interest in CS to know what a good sampling defined by the sensing matrix is and how to measure it. In this work, we provided analytical proofs of properties of the metric discrepancy that allow us to propose a fast algorithm for discrepancy calculation. Such metric measures the quality of the sampling measurement points …

3d Printing Of High Viscosity Fluids And Its Application In 3d Printing Of Prosthetic Teeth., Abhilash Aditya

Open Access Theses & Dissertations

The advancement in technology has brought forward non-conventional manufacturing methods that are efficient and advantageous for specific applications. 3D printing is one such outcome, whose applications stretch from biomedical applications to daily products. 3D printing is a rapidly growing technology, and innovative research developments have proven versatility in creating physical objects. Simplification and constant improvement in Fused Deposition Modeling (FDM) operation result from decades of research. However, 3D printing is material-specific and contributes to shortcomings in the technology. The build-material dictates the extrusion parameters, including the material discharge rate and head speed for a continuous flow. Customization being the prime …

Engineering Cardiac Tissues With Three-Dimensional Bioprinting For Biomedical Applications, Matthew Alonzo

Open Access Theses & Dissertations

The role of a biomedical engineer is to solve unmet health-related needs that face society. For the past couple of decades, heart disease (HD) has remained the leading cause of mortality and morbidity worldwide. The disease is characterized by various pathologies that affect the heart. Indeed, malfunction of one of the bodyâ??s most vital organs is bound to manifest poor health and even death in patients. Despite advances in medicine and technology, heart disease continues to be prevalent and diminishes the quality of life for many around the world. Certainly, there exists a need for developing new tools to better …

Evaluation Of The Cytotoxyc Effects Of Lmdf5-7 On A Human T-Cell Leukemia Cell Line, Andrea F. Ibarra Chacon

Open Access Theses & Dissertations

According to World Health Organization (WHO), cancer is the second leading cause of death worldwide, with 9.6 million deaths in 2018 . In the United States, an estimated 434,982 people were living with cancer during 2017 . Leukemia is the most common blood cancer in children from birth to 14 years old . In particular, Hispanic children in the United States experience a higher incidence rate of leukemia . Therefore, the discovery of novel cancer therapies is necessary to help those affected survive the disease. A new compound, LMDF5-7 was investigated and found to have anticancer properties that can help …

Application Of Compressive Sensing To Microwave Tomography, Rafael Gerardo Lopez

Open Access Theses & Dissertations

Microwave tomography(MT) allows the safe, non-intrusive examination of the internal structureof an object by irradiating it with microwave signals and measuring how they get attenuated and diffracted as they propagate through the object. Measurement of these signals is difficult and slow, it depends on the objectâ??s physical properties and the test setup used for this. MT is based on a scanning process that yields measurement data with unique characteristics that make it difficult to process using standard computational methods. As the number of measurements needed for an image with acceptable resolution increases, the complexity of processing all the data becomes …

Photovoltage Enhancement For Stable Perovskite Solar Cells With A Temperature-Controlled Grain Growth Technique, Luis Eduardo Valerio

Open Access Theses & Dissertations

By performing strong characterizations methods, one can begin to fully understand the chemistry and composition behind a great performing perovskite solar cell. Understanding how the interaction between layers inside a solar cell is driven by the temperature and overall environment is a key element to improve the fabrication process and overall efficiency of such cells. This Thesis will present a study of the hybrid organic-inorganic, mixed-cation, mixed-halide, temperature and thickness-controlled perovskite solar cell. A constant power conversion efficiency (PCE) ranging between 15-17% and an open circuit voltage V¬oc above 1.05 V for a wide-band gap perovskite cell is presented.

Formulation Strategies To Enhance Solubility And Permeability Of Small Molecules For Drug Delivery Applications, Pradeep Kumar Bolla

Open Access Theses & Dissertations

All the new chemical entities/drug molecules intended for therapeutic use must be administered using an appropriate delivery system/dosage form to achieve maximum bioavailability. However, designing a drug delivery system is complex as several factors such as lipophilicity, molecular mass, crystallinity, ionic charge, polymorphic forms and hydrogen bonding) affect the solubility and permeability of these molecules. Biopharmaceutics drug classification system (BCS) categorizes the existing drugs into four classes based on the aqueous solubility and membrane permeability and it is reported that >70% of the drugs are poorly soluble and belong to BCS class II and BCS class IV. Several physical, chemical …

Supercritical Processed Decellularized Extracellualr Matrix As Regeneration Therapeutics Applying 3d Printing, Seungwon Chung

Open Access Theses & Dissertations

Extracellular matrix has been broadly applied and show great promise in medical applications and tissue engineering. Product of extracellular matrix (ECM) should be treated with decellularization and purification process. Supercritical carbon dioxide treatment is of particular interest for purifying ECM because of its medically available and rapid speed of process. However, it is not fully researched in treatment of biomaterials for tissue engineering. Therefore, we investigated optimal conditions of supercritical carbon dioxide processing in different extracting parameters from porcine adipose tissue. The 3-day, dual treatment including enzymatic decellularization and supercritical fluid extraction of pork adipose tissue were performed. Two types …

3d Printed Alginate-Based Zinc Oxide Nanoparticle Scaffolds For Wound Healing, Carol Cleetus

Open Access Theses & Dissertations

Effective treatment of chronic wounds is essential for the prevention of infection and scar tissue formation, requiring a novel approach to address the limitations of existing options. This study utilizes Calcium Chloride (CaCl2) crosslinked alginate, a common biomaterial widely used in wound dressing, and UV activated Zinc Oxide (ZnO) nanoparticles (NPs) for their potential hydroxyl radical mediated antibacterial applications. ZnO NPs were synthesized by combustion method from Zinc Nitrate Hexahydrate and Sucrose. Scanning Electron Microscopy (SEM) and X-Ray Diffraction (XRD) characterization were used to verify composition and NP size. Terephthalic Acid, used as a fluorescent probe, confirmed the generation of …

Regulation Of Schlafen 11 Expression, Christian Waldemar Corona Ayala

Open Access Theses & Dissertations

Schlafen 11 (SLFN11) is a member a family of proteins that can be found in mammals. Members of this family are involved in important functions. SLFN11 in particular has been identified as a restriction factor for several evolutionarily disparate viruses such as HIV-1 and Flaviviruses and to play an important role in DNA repair, sensitizing cells to chemotherapy. Despite its relevance SLFN11 remains largely uncharacterized. The aim of this research was to achieve a more comprehensive understanding the regulation mechanism of SLFN 11 expression. Before our research, it was only known that type I interferon (IFN) regulates SLFN11 levels. However, …

To Or Through The Skin: A Rational Design Of Transdermal Drug Delivery, Isaac Giovanni Deaguero

Open Access Theses & Dissertations

The skin is the largest organ in the body and plays many crucial roles through diverse functions ranging from protection, temperature regulation, energy storage via fat deposits, and is used to communicate with our surroundings. Various methods have been attempted to deliver drugs to target areas of the skin in effective dosages by a variety of means with limited success. Recently, advances in transdermal drug delivery have offered avenues previously unattainable through conventional means. Some of these new delivery methods have been reviewed, explored and offer promising results with the potential to carve a new avenue in the way therapeutic …

Development And Characterization Of Perovskite Solar Cells For Tandem Device Configuration, Angel Moiseis De La Rosa

Open Access Theses & Dissertations

Photovoltaic devices based on perovskite materials are constantly progressing towards more applicability in large-area panels. In order for perovskite-based photovoltaics to reach reliable and stable commercialization, common issues with the use of perovskite still need to be resolved, including the need to identify fabrication processes that can yield optimal material parameters for better photovoltaic performance. Defining an optimal fabrication process requires that researchers and manufacturers alike come to an agreement regarding perovskite characteristics that result from device operation and material processing. This work focuses on characterizing physical, electrical, and electronic properties of a FAxCs1-xPb(IyBr1-y)3 perovskite, and how some of these …

A Cellulose-Based Biological Sensor For The Quantitative Determination Of Glucose And Glycated Hemoglobin (Hba1c), Gilberto Henao-Pabon

Open Access Theses & Dissertations

ABSTRACT

Importance: Diabetes is a common world-wide disease characterized by insulin resistance and as result there is an increased risk of cardiovascular disease and other metabolic abnormalities, that contribute to irreversible end-organ damage. The cause of diabetes is multifactorial and includes genetic, inflammatory and environmental factors plus lifestyle issues. Because in diabetes there are high levels of glucose and glycated hemoglobin, these molecules are used in clinical settings for the acute and chronic management of diabetic patients.

Objectives: a. To design and build an electrochemical biological sensor using the enzyme Glucose Oxidase (GOX) to detect glucose in biological fluids.

b. …

The Study Of The Mouse Schlafen Family Members As Mediators Of Antiviral Activity, Julia Fernanda Hernandez

Open Access Theses & Dissertations

The Schlafen family of proteins was first characterized in 1988, and since then evidence of their relevance in different physiological and pathological situations have been accumulating although at a slow pace. Hence, the biological roles of these proteins remain ill-defined. The expression of these proteins is positively regulated by type 1 interferons, constituting a component of the innate immune response. Functions of these proteins vary from regulation of cell proliferation to restriction of viral infections. Recent studies have implicated SLFN11 and SLFN13 as inhibitors of HIV-1 infection2-4. The mechanism of action of SLFN11 resides in its capacity to regulate the …

Design And Characterization Of Thermal Inkjet Bioprinted Constructs For The Treatment Of Diabetic Foot Ulcers And Other Wound Healing Impaired Conditions, Luis Horacio Solis

Open Access Theses & Dissertations

Tissue engineering (TE) is a multidisciplinary practice focused on developing patient-specific constructs to repair, regenerate, or replace injured tissues and organs. One biofabrication process that has gained tremendous momentum in this field is bioprinting. Most, if not all bioprinting modalities embody the same principles of heat and shear due to mechanical forces or friction as cells are forced through narrow orifices. While it is important to examine the interaction between host and implanted constructs, it is also crucial to understand the direct effects that these bioprinting technologies have on cells before embedding them into TE applications.

The purpose of this …

Tram System Automation For Environmental Spectroscopy And Vegetation Monitoring, Enrique Anguiano Chavez

Open Access Theses & Dissertations

Spectroscopy is the science of studying the interactions of matter and electromagnetic radiation (EMR). In particular, field spectroscopy takes place in a natural environment with a natural source of EMR. The paper presents progress towards the development and automation of a tram cart system. The new system in development collects high resolution, hyperspectral images and data from a spectrometer. Alternatives for a sensor cover mechanism to provide cover for the sensors mounted while the system is not operating are discussed, analyzing and comparing the benefits and disadvantages. An implementation for a charging station in an environment isolated from the electric …

The Study Of Non-Permanent Tattoo Ink Using Nano Silver Compounds And Untact 3d Printing Technology, Jisu Lee

Open Access Theses & Dissertations

Due to a recent epidemic of COVID 19, the possibility of 3D tattoo printing technology using the Internet of Things (IoT) control system developed in a non-face-to-face contact process was identified. A non-surgical tattoo process and hygiene safety differentiated with silver tattoo ink was used to solve the health problems arising from the surgical tattoo process and to identify 3D tattoo printing techniques through a non-personal contact concept. During the tattoo processing, the image selected by the customer is sent to a designated printer via an IoT control system in a separate location. A piston-type extruder (PTE) printing technique was …

Independent And Simultaneous Control Of Electromagnetic Wave Properties In Self-Collimating Photonic Crystals Using Spatial Variance, Jesus Javier Gutierrez

Open Access Theses & Dissertations

Photonic crystals are engineered periodic structures that provide great control over electromagnetic waves. One of these mechanisms is self-collimation, in which the electromagnetic wave travels through the photonic crystal along an axis of the lattice without diffracting or spreading. This mechanism of self-collimation is a dispersion phenomenon, which is dependent on the unit cell's physical and geometrical characteristics. An algorithm for generating spatially variant lattices (SVL) was developed that can change geometrical properties in photonic crystals as a function of position, like unit cell orientation, fill fraction, symmetry, and others in a manner that is smooth, continuous, and virtually free …