Engineering Commons^™

Making Makers: Tracing Stem Identity In Rural Communities, Jessie Nixon, Andy Stoiber, Erica Halverson, Michael Dando

Journal of Pre-College Engineering Education Research (J-PEER)

In this article, we describe efforts to reduce barriers of entry to pre-college engineering in a rural community by training local teens to become maker-mentors and staff a mobile makerspace in their community. We bring a communities of practice frame to our inquiry, focusing on inbound and peripheral learning and identity trajectories as a mechanism for representing the maker-mentor experience. Through a longitudinal case study, we traced the individual trajectories of five maker-mentors over two years. We found a collection of interrelated factors present in those students who maintained inbound trajectories and those who remained on the periphery. Our research …

Research Productivity Of Wadia Institute Of Himalayan Geology, Devendra Singh Rawat, Kunwar Singh, Madan Singh, Avadhesh Kumar Patel, Ayush Kumar Patel

Library Philosophy and Practice (e-journal)

Bibliometric analysis was used to assess the research productivity of the Wadia Institute of Himalayan Geological (WIHG) during 1991-2020. Data was collected from the Scopus database, and VOSviewer software used for visualization. The study focused on various bibliometrics parameters like year-wise research growth, Authors productivity, Growth rates measures (AGR, RGR, Dt), Collaboration measures (DC and CC), subject-wise distributions, most prolific authors, highly collaborative institutions, most cited documents, top funding agency, types of documents, etc. The results showed that the maximum number of documents, 93 (7.21%), were published in 2017. India and the United States of America contributed the highest numbers …

Funds Of Knowledge As Pre-College Experiences That Promote Minoritized Students’ Interest, Self-Efficacy Beliefs, And Choice Of Majoring In Engineering, Dina Verdín, Jessica M. Smith, Juan Lucena

Journal of Pre-College Engineering Education Research (J-PEER)

Pre-college experiences both inside and outside of the classroom inform students’ interest in science, technology, engineering, and mathematics (STEM)-related activities, help them evaluate their knowledge and skills in various tasks, and shape their perceptions of themselves as individuals who can participate in STEM. Yet little empirical research examines the valuable pre-college knowledge, practices, and skills that minoritized students acquire through their home experiences and how they can support students’ transition into an engineering pathway. This study addresses this gap by investigating how students’ funds of knowledge support their interest in engineering, self-efficacy beliefs, and certainty of pursuing an engineering major. …

The Production Of Epistemic Culture And Agency During A First-Grade Engineering Design Unit In An Urban Emergent School, Heidi B. Carlone, Alison K. Mercier, Salem R. Metzger

Journal of Pre-College Engineering Education Research (J-PEER)

Primary school practices are often bound by traditions that perpetuate compliance and skills-based, decontextualized, rote memorization activities. These histories of practice, prevalent in schools serving mostly Black and Brown children, make it inordinately difficult for students to author themselves as knowledge builders (i.e., with epistemic agency), which is a form of injustice. Engineering is a potentially fertile context to support the creation of epistemic culture, whereby young students’ assets are recognized, named, and leveraged as they create and shape the group’s disciplinary knowledge. The authors investigated this potential. The primary research question was: How do first-grade students in an urban …

Engineering Students' Perceptions Of Their Development Of Professional Skills, Caitriona Depaor, Una Beagon, Aimee Byrne, Darren Carthy, Patrick Crean, Louise Lynch, Dervilla Niall

Conference Papers

No abstract provided.

Scitechatorium, Esther Hurst, Emma Salam, Nejad Harara, Felipe Dejesus

Mechanical Engineering

The Bellevue-Santa Fe Charter School SciTechatorium needs a new educational exhibit for its K-6th grade students. The exhibit must be safe, engaging, and exciting for the students to use, and will ideally introduce students to the topics of Science, Mathematics, Engineering, Art, and Technology (STEAM) concepts. The team has investigated some of the most popular science museums from around the nation, as well as several popular children’s educational toys. This research revealed a need for hands on, focused exhibits to provide an effective educational experience. Many of our favorite existing exhibits give students an opportunity to fail in a safe …

Real-Life Conundrums In The Struggle For Institutional Transformation, Julia Mcquillan, Nestor Hernandez

Department of Sociology: Faculty Publications

Intersecting systems of inequality (i.e., gender and race/ethnicity) are remarkably resistant to change. Many universities, however, seek National Science Foundation Institutional Transformation awards to change processes, procedures, and cultures to make science, technology, engineering, and mathematics (STEM) departments more inclusive. In this article we describe a case study with observations for eight years of before (2000–2007), five during (2008–2013), and seven after (2014–2020) intensive efforts to increase women through reducing barriers and increasing access to women. Finally, we reflect on flawed assumptions built into the proposal, the slow and uneven change in the proportion of women over time, the strengths …

Proposal For Purchase Of In-House Drone For Cal Poly’S Construction Management Department, Angel Sanchez

Construction Management

Over the years, the construction industry has been steadily seeing an influx of new technology and innovation that has potential to improve the industry in many ways. One form of technology that has been introduced into the construction industry is Unmanned Aerial Systems (UAS). UAS technology includes drones, photogrammetry capabilities, and the software that links field data to analytic tools. In the past decade, drones in construction have seen a considerable amount of growth and the uses for drones in construction, therefore new job opportunities in construction have been created that require knowledge of UAS technology. As the construction industry …

Hands-On 3d Printed Dynamics Activities, Dakota Baker, Jacob Lindberg, Andrew Meyenberg, Junnior Rodriguez

Mechanical Engineering

The advancement of 3D printing has allowed everyday individuals to rapid prototype and manufacture in a more efficient, cost-effective, and timely manner. This has paved the way for a more adaptable educational model, by allowing instructors to easily access alternative instruments for teaching. By providing students with tangible tools, they will better be able to grasp complex principles. Dynamics professors need a way in which they can easily access these academic tools, transport them to and from class, and teach multiple dynamics principles through variations of a single 3D printed kit. Interviews with professors and students were conducted to gain …

Promoting Equity By Scaling Up Summer Engineering Experiences: A Retrospective Reflection On Tensions And Tradeoffs, Walter C. Lee, David B. Knight, Monica E. Cardella

Journal of Pre-College Engineering Education Research (J-PEER)

A central challenge in engineering education is providing experiences that are appropriate for and accessible to underserved communities. However, to provide such experiences, we must better understand the process of offering a geographically distributed asset-based out-of-school program. This paper focuses on a collaborative research project that examined the broad implementation of the Summer Engineering Experiences for Kids (SEEK) program organized by the National Society of Black Engineers (NSBE). SEEK is a three-week summer program that engages participants in hands-on, team-based engineering design projects. NSBE’s goal is to make SEEK culturally sustaining, community-connected, and scalable. The purpose of this paper is …

Transnational Latinx Youths’ Workplace Funds Of Knowledge And Implications For Assets-Based, Equity-Oriented Engineering Education, Amy Wilson-Lopez, Jorge Acosta-Feliz

Journal of Pre-College Engineering Education Research (J-PEER)

Due to economic inequality in society, millions of Latinx high school youth work after-school jobs and summer jobs in order to provide additional income for their families. The purpose of this qualitative study, conducted with transnational Latinx youth, was to identify the engineering-related skills and bodies of knowledge they developed and applied while in different workplaces. This study is framed in complementary theories of funds of knowledge, Vygotskian theories of mediated action, and theories of resistant capital. Specifically, this study is based in the premise that youth can develop engineering-related funds of knowledge through tool-mediated, goal-directed activities jointly conducted with …

The Ingenuity Of Everyday Practice: A Framework For Justice-Centered Identity Work In Engineering In The Middle Grades, Angela M. Calabrese Barton, Kathleen Schenkel, Edna Tan

Journal of Pre-College Engineering Education Research (J-PEER)

Inequities in opportunities to learn and become in engineering, especially for minoritized youth, are enduring and systemic. How students experience engineering education, through curriculum, pedagogy, and teacher/student interactions, all shape opportunities for identity development. In this paper we draw upon cultural studies and critical ethnography to explore how and why students engage in engineering for sustainable communities and its relationship to their identity work. We ground our work in a justice-centered asset-based stance that centers how people’s lived lives and community wisdom yield powerful forms of cultural knowledge/practice relevant to learning and engaging in science, technology, engineering, and mathematics. We …

Elementary Teacher Adaptations To Engineering Curricula To Leverage Student And Community Resources, Jennifer L. Chiu, Sarah J. Fick, Kevin W. Mcelhaney, Nonye Alozie, Reina Fujii

Journal of Pre-College Engineering Education Research (J-PEER)

This paper addresses an important consideration for promoting equitable engineering instruction: understanding how teachers contextualize curricular materials to draw upon student and community resources. We present a descriptive case study of two 5th grade teachers who co-designed a Next Generation Science Standards (NGSS)-aligned curricular unit that integrated science, engineering, and computational modeling. The five-week project challenged students to redesign their school grounds to reduce water runoff and increase accessibility for students with disabilities. The teachers implemented the project with one Grade 5 class with a large proportion of students having individualized learning plans and cultural backgrounds minoritized in science, technology, …

Equitizing Engineering Education By Valuing Children’S Assets: Including Empathy And An Ethic Of Care When Considering Trade-Offs After Design Failures, Pamela S. Lottero-Perdue, John Settlage

Journal of Pre-College Engineering Education Research (J-PEER)

The broad case being made in this paper is that recognizing student assets—rather than focusing on deficits—is essential for making engineering education more equitable. The paper begins with our exploration of an epistemic practice of engineering, ‘‘making trade-offs,’’ as enacted by kindergartners after experiencing design failure and during redesign. We then acknowledge through a reexamination of data that our understanding of children’s grappling about a trade-off was incomplete without considering another asset that children brought to the design experience: ‘‘enacting empathy and an ethic of care.’’ We argue for the inclusion of this asset as an epistemic practice of engineering. …

Stem Education In The Early Childhood Classroom, Julia Biagiotti

Honors Program Theses and Projects

This qualitative study focuses on the type of STEM education students are getting at the early childhood level (PK-2). Based on gaps found in literature, an interview protocol was created and six participants with various careers in the field of STEM education were interviewed. The research was concentrated on trying to determine what components of STEM education make it successful in the early childhood classroom. All of the interview responses were analyzed and coded and determined the results found below. A few integral parts of a successful STEM education seem to be curiosity, asking questions and a hands-on component, but …

Pharyngeal Constriction As A Cause For Late Acquisition And Speech Sound Disorders Of Rhotic Sounds In English, Spanish, And French, Connor Mahon

The Downtown Review: An Interdisciplinary Journal Written and Peer-Reviewed by Mandel Honors College Students at Cleveland State University

This paper attempts to explain why rhotic sounds are cross-linguistically late developing among the sound inventory of children. Included is a summary of the current literature regarding classification of rhotic sounds, an examination of the articulatory movement of the tongue root, and an overview of the clinical implications on the field of speech-language pathology. The evidence presented supports the hypothesis that pharyngeal constriction is characteristic of rhotic sounds in many languages, and that it is related to the relative late acquisition and higher rate of speech sound disorders, as seen in English, Spanish, and French.

Development Of A Solidworks Simulation Toolkit For A Sophomore Level Biomedical Engineering Course, Jordan Crosby

Biomedical Engineering Undergraduate Honors Theses

In the engineering industry, computer-aided design (CAD) programs are used to create models and create virtual experiments or studies that allow engineers to observe the real behavior of parts or assemblies under certain conditions. Companies hire students with experience in CAD, as professionals believe that CAD experience is beneficial [1,2]. SolidWorks is among the most popular CAD software used by engineers. SolidWorks has multiple functionalities that also allow for finite element analysis dependent on the license. Users can create simulation studies in SolidWorks Simulation that can be used as an accurate approximation for real results.

The goal of this study …

What’S The Buzz? A Hands-On, Interdisciplinary, And Fun Way To Learn About Circuits, Energy, Engineering, Bee Communication, And Pollination, Christine L. Moskalik

Publications & Research

How can a simple toothbrush- bot be used to model honey bee communication as well as the role of such communication in pollination? Learners explore basic circuitry through the popular tooth- brush-bot activity, with a spin.

Contributing To Engineering Colleges Students' Development Through Out-Of-Class Involvement: A Survey Of Chinese Private Colleges' Engineering Students, Wanlu Li

Education (PhD) Dissertations

The purpose of this study was to investigate the primary characteristics of engineering college students’ involvement in out-of-class activities (OA) at one private college in China through the use of the translated and culturally adapted Chinese version of the Postsecondary Student Engagement Survey (PosSES 2.1). This study provides the statistical analyses of the survey data completed by 283 senior engineering students on their perceptions about their levels of involvement related to positive/negative outcomes students perceive and affective engagement. Data results showed all levels of involvement have a significant influence on positive outcomes. Besides, active involvement degree, hours, and types of …

The Health Benefits Of Video Games, Zachary Shanks

Emerging Writers

This paper seeks to evaluate if video games are useful as more than just entertainment.  The research shows that they can be utilized in the educational, medical, and business fields. Video Games have been shown to benefit the physical, emotional, and mental health of players, as well as create more efficient learning and working environments. The article argues that video games are no longer just a source of entertainment, as they are now becoming useful tools in society.

Using Scrum To Teach Standards-Based K-12 Computer Science: A Prosepectus For A Master’S Level Methods Class At Buffalo State, Noah M. Pierce

Career & Technical Education Theses

Computer Science has been increasingly prevalent in K-12 education in recent decades. Most Americans believe that Computer Science is as important as other skills taught in school; further, parents are putting pressure on districts to offer Computer Science programs (1.1). To meet this demand, many teacher preparation programs are adding Computer Science Education to their offering of degrees. This thesis investigates Agile and Scrum product development as a potential method of Computer Science instruction, explores the standards relevant to a Computer Science teacher, and offers a prospectus for a new Graduate Level Methods class to prepare Computer Science teachers to …

Improving Student Success And Engagement In Virtual And Hybrid Classrooms., Sydney Fogo

Electronic Theses and Dissertations

The following thesis examines virtual classes from the University of Louisville in the Fall 2020 semester to discover points of weakness relative to keeping students engaged in online courses. Three surveys were taken by a select group of participants over the course of the fall semester in order to collect student opinion on specific classes. Interviews were held with a subset of students from the group of participants and also with professors who taught the study’s participants in the fall of 2020. Their responses and conversations were used to determine possible areas of improvement for virtual classes. This information was …

2021- The Twenty-Fifth Annual Symposium Of Student Scholars

Symposium of Student Scholars Program Books

The full program book from the Twenty-fifth Annual Symposium of Student Scholars, held on April 29, 2021. Includes abstracts from the presentations and posters.

Mapping Renewal: How An Unexpected Interdisciplinary Collaboration Transformed A Digital Humanities Project, Elise Tanner, Geoffrey Joseph

Digital Initiatives Symposium

Funded by a National Endowment for Humanities (NEH) Humanities Collections and Reference Resources Foundations Grant, the UA Little Rock Center for Arkansas History and Culture’s “Mapping Renewal” pilot project focused on creating access to and providing spatial context to archival materials related to racial segregation and urban renewal in the city of Little Rock, Arkansas, from 1954-1989. An unplanned interdisciplinary collaboration with the UA Little Rock Arkansas Economic Development Institute (AEDI) has proven to be an invaluable partnership. One team member from each department will demonstrate the Mapping Renewal website and discuss how the collaborative process has changed and shaped …

Characterizing Students’ Engineering Design Strategies Using Energy3d, Jasmine Singh, Viranga Perera, Alejandra Magana, Brittany Newell

Discovery Undergraduate Interdisciplinary Research Internship

The goals of this study are to characterize design actions that students performed when solving a design challenge, and to create a machine learning model to help future students make better engineering design choices. We analyze data from an introductory engineering course where students used Energy3D, an open source computer-aided design software, to design a zero-energy home (i.e. a home that consumes no net energy over a period of a year). Student design actions within the software were recorded into text files. Using a sample of over 300 students, we first identify patterns in the data to assess how students …

Durability Of Concrete Using Foundry Waste Sand, Meshari Alrajab

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Business and Technology Morehead State University in partial fulfillment of the requirements for the Degree Master of Science by Meshari Alrajab on April 20, 2021.

Virtual Learning On Swayam Platform By Engineering And Technology Students During Covid-19: An Analysis, Suryakanta Jena, Puspanjali Jena Prof.(Dr)

Library Philosophy and Practice (e-journal)

Democratization of education has formed the base for open and free education. The movement of Open Education is gaining its impetus through the emerging trends of new educational technologies. In the context of OER (Open Education Resource), the Massive Open Online Courses (MOOCs) concept is providing a framework for virtual classroom and collaborative learning. ‘Study Webs of Active Learning for Young Aspiring Minds’ (SWAYAM), as an Indian MOOC, has been providing several courses in various disciplines. The present study tries to analyse the courses in engineering and technology category on SWAYAM during the COVID-19 situation. The present study has critically …

Human-Machine Communication: Complete Volume. Volume 2

Human-Machine Communication

This is the complete volume of HMC Volume 2.

"Inclusive Inquiry." 14th Annual Research Week: Event Proceedings, University Of The Incarnate Word

Excellence Summit (Research Week) Archived Proceedings

Presentations of completed and ongoing research activity conducted by graduate and undergraduate students and faculty at University of the Incarnate Word. Coordinated and presented by the Office of Research and Graduate Studies.

Building Our Future: Positive Steps Forward For Apprenticeship Education And Training In Ireland, Roisin Murphy Dr

Level 3

The construction labour market has undergone a period of considerable turbulence resulting from economic cyclicality over the last decade. While some facets of the labour market have recovered in line with economic growth, there remain challenges in attracting new apprentices. The issue is particularly pronounced for certain “wet trades”; namely bricklaying, floor and wall tiling, painting and decorating and plastering.

A mixed method research strategy was employed for the purpose of determining labour market trends for these trades, comprising of employer and apprentice surveys in addition to semi-structured interviews. Findings from the research uncover not only a shift …