Engineering Commons^™

Production Of Lovastatin And Sulochrin By Aspergillus Terreus Using Solid State Fermentation, Rizna Triana Dewi, Nina Artanti, Hani Mulyani, Puspa Dewi Narrij Lotulung, Minarti Minarti

Makara Journal of Technology

Lovastatin is an anti-cholesterol agent that was produced by Aspergillus terreus using solid state fermentation (SSF). During this fermentation process, sulochrin is also produced as an unwanted co-metabolite. However, our previous result showed that sulochrin had potential as antidiabetes because it is an inhibitor agent of α-glucosidase. In this paper, we reported our observation on lovastatin and sulochrin production pattern in relation with inhibitor α-glucosidase activity during eleven days fermentation of A. terreus koji (SSF) ethyl acetate extract. Koji obtained from solid state fermentation with rice as the substrate and incubated at room temperature, sample is taken daily for eleven …

The Zonation Of Abration Speed Characteristics And Its Handling Technique Of Jalinbar Of North Bengkulu As Vital Band Transportation, Suwarsono Suwarsono, Supiyati Supiyati, Suwardi Suwardi

Makara Journal of Technology

The Zonation of Abration Speed Characteristics and its Handling Technique of Jalinbar of North Bengkulu as Vital Band Transportation. Jalinbar Bengkulu is a vital infrastructure for traffic service, goods, agriculture products, mining, plantation and oils distribution. Abration due to scour of seawater often make these roads jammed and discrupts the peoples economy movement. The aims of this research was to investigate the abration speed of all segment of Jalinbar. The research method was a combination of two methods: A determination of swash energy of sea water using photometer and determination of rocks binding energy using douche method. The result shows …

The Formation Design Of Noise Reducers From Plywood, Foam, Tray, Dan Coconut Fiber For Static Sources, Melati Ferianita Fachrul, Wisnu Eka Yulyanto, Asharani Merya

Makara Journal of Technology

The Formation Design of Noise Reducers from Plywood, Foam, Tray, dan Coconut Fiber for Static Sources. Research was conducted in a semi-anechoic room using a method referring to the ISO 3745. The design used is the Hemisphere in which the source of noise is analogous to engines in an industry. The value reduction in the rate of sound power is obtained by comparing the sound power level before and after control is given. The noise control test materials used consist of layers of plywood, foam, fiber and tray (egg box). The effectiveness of these materials is tested by measuring the …

Performance Of Indiana’S Superpave Hma Mixtures, Ayesha Shah, Rebecca Mcdaniel

JTRP Technical Reports

This project followed the performance of a number of hot mix asphalt paving projects for seven to eight years in an attempt to relate laboratory test results to field performance. First, a small scale study compared sampling locations, specific gravity test procedures and compaction devices used on two samples from projects, one with volumetric acceptance and one with non-volumetric acceptance, to determine the best combination to use for Part 2 of the study. In Part 2, 12 projects constructed in 2001 and 2002 were sampled, tested and monitored. Laboratory testing involved determining maximum and bulk specific gravities, binder content, air …

Natural Gas As Petroleum Fuel Substitution: Analysis Of Supply-Demand Projections, Infrastructures, Investments And End-User Prices, Abdul Qoyum Tjandranegara, Arsegianto Arsegianto, Widodo Wahyu Purwanto

Makara Journal of Technology

The petroleum fuels (PF) subsidy has long burdens the government spending, and discourages less expensive energy usage such as natural gas (NG). Exporting NG and importing the more expensive PF products cause financial losses to Indonesia. The lack of NG infrastructure is the main hurdle in maximizing domestic NG usage and so does the perception of its high investment costs burdening government spending and pushing the NG transportation cost up. This study calculates the required NG infrastructure and its investments for several levels of PF substitutions up to 2030. To balance the NG demands, the supply from each field and …

The Synergy Of Recombinant Xylanolytic Enzyme On Xylan Hydrolysis, One Asmarani, Bambang Prajogo Eko Wardojo, Ni Nyoman Tri Puspaningsih

Makara Journal of Technology

Microbial xylanases or xylanolytic enzyme have received considerable attention over the last years owing to a multitude of possible applications. These enzymes have potential in the biodegradation of lignocellulosic biomass to fuels, chemicals, fruit juice, animal feed and in improving rumen digestion. More recently, the use of xylanases as bleaching agent in the pulp and paper industry has been suggested to replace of some of the chemicals presently used for this purpose. Such applications could have an important positive impact on the environment. The purpose of this research was determining the synergy of 3 recombinant xylanolytic enzymes (β-xylosidase, exo-xylanase and …

Cradle To Gate Simple Life Cycle Assessment Of Biodiesel Production In Indonesi, Akhmad Hidayatno, Teuku Yuri M. Zagloel, Widodo Wahyu Purwanto, Carissa Carissa, Lindi Anggraini

Makara Journal of Technology

The focus of this research is to analyze potential environmental impact in the supply chain of palm oil biodiesel industries. Simple Life Cycle Assessment (LCA) is applied to analyze impacts, produced by the three main units in the supply chain of Palm-Oil-based Biodiesel, which are Palm Plantation, CPO mill, and Biodiesel Plant. We developed LCA calculation model using spreadsheet software, used to assess a number of input scenarios to evaluate the best scenario, in variation of: land quality, land area and the rate of clearing, land clearing technique and type of the original land. The biggest potential environmental impact is …

Characterization Of Surface Active Shell Charcoal Nyamplung Seeds (Calophyllum Inophyllum Linn), Santiyo Wibowo, Wasrin Syafi, Gustan Pari

Makara Journal of Technology

Characterization of Surface Active Shell Charcoal Nyamplung Seeds (Calophyllum inophyllum Linn). Chemical and physical activation of nyamplung shell with 0%, 5%, and 10% H3PO4 for 60 and 120 minutes has been carried out to prepare activated charcoal. The purpose of this experiment was to look into the characteristic of nyamplung shell activated charcoal surface. Nyamplung shell was carbonized into charcoal, then activated by immersion in H3PO4 solution using 0%, 5% and 10%, for 24 hours, and heated in retort at two temperatures (700 and 800 oC) and two duration (60 and 120 minutes). The material were characterized by fourier transform …

An Investigation Into The Resistance/Powering And Seakeeping Characteristics Of River Catamaran And Trimarana, Murdijanto Murdijanto, I Ketut Aria Pria Utama, Andi Jamaluddin

Makara Journal of Technology

The increase of fuel price has caused fleet operational and shipping business to be in danger situation. The fuel consumption of a ship is influenced by ship volume or wetted area which contributes directly to the increase of ship resistance and the size of main engine. In order to find out the appropriate answers, a series of investigation into river transportation using monohull, catamaran and trimaran types of vessel was carried out. The work focused on the estimation of total resistance and powering as well as seakeeping characteristics and carried out experimentally using tank test and numerically using a ship …

Determining The Standard Value Of The Oily Distortion Of Acquisition The Fingerprint Images, Rahmat Syam, Mochamad Hariadi, Mauridhi Hery Purnomo

Makara Journal of Technology

Determining the Standard Value of the Oily Distortion of Acquisition the Fingerprint Images. This research describes a novel procedure for determining the standard value of the oily distortion of acquisition the fingerprint images based on the score of clarity and ridge-valley thickness ratio. The fingerprint image is quantized into blocks size 32 x 32 pixels. Inside each block, an orientation line, which perpendicular to the ridge direction, is computed. The center of the block along the ridge direction, a two-dimension (2-D) vector V1 (slanted square) with the pixel size 32 x 13 pixels can be extracted and transformed to a …

Are Ieee 754 32-Bit And 64-Bit Binary Floating-Point Accurate Enough?, Bernaridho Hutabarat, I Ketut Eddy Purnama, Mochamad Hariadi, Mauridhi Hery Purnomo

Makara Journal of Technology

This paper describes a research toward the accuracy of floating-point values, and effort to reveal the real accuracy. The methods used in this research paper are assignment of values, assignment of value of arithmetic expressions, and output the values using floating-point value format that helps reveal the accuracy. The programming-tool used are Visual C# 9, Visual C++ 9, Java 5, and Visual BASIC 9. These tools run on top of Intel 80 x 86 hardware. The results show that 1*10-x cannot be accurately represented, and the approximate accuracy ranges only from 7 to 16 decimal digits.

Ergonomic Analysis Of Garment Industry Using Posture Evaluation Index (Pei) In Virtual Environment, Erlinda Muslim, Boy Nurtjahyo, Romadhani Ardi

Makara Journal of Technology

Ergonomic Analysis of Garment Industry using Posture Evaluation Index (PEI) in Virtual Environment. This research tried to study, in a virtual environment, the ergonomics of four divisions in garment industry: cutting division, sewing division, button division, and finishing division. Variables that influence the working conditions in each division are different; depend on the real situations that happened. The purpose is to assess the real working conditions based on ergonomics study using Posture Evaluation Index (PEI). PEI integrates the scores of low back analysis (LBA), ovako working posture (OWAS), and rapid upper limb assessment (RULA). Analysis phase was done using digital …

Formation Of Caco3 Particle And Conductivity Of Na2co3 And Cacl2 Solution Under Magnetic Field On Dynamic Fluid System, Nelson Saksono, Setijo Bismo, Roekmijati Widaningroem, Azwar Manaf

Makara Journal of Technology

Hard water causes the CaCO3 scale formation on the pipe walls and heat exchanger equipments in industrial or domestic water processes. A great number of experimental researches on the prevention of the CaCO3 precipitation process by magnetic field have been carried out. In this research, Na2CO3 and CaCl2 solutions was magnetized in the circulated flow condition (dynamic fluid system). The velocity of fluid and the circulation time was modified to examine its influences to the magnetization process. CaCO3 content was measured by titration method of EDTA complexometry. Conductivity test was conducted to find out hydrate ion bonding. The results showed …

Two-Class Classification With Various Characteristics Based On Kernel Principal Component Analysis And Support Vector Machines, Ivanna Kristianti Timotius, Iwan Setyawan, Andreas Ardian Febrianto

Makara Journal of Technology

Two class pattern classification problems appeared in many applications. In some applications, the characteristic of the members in a class is dissimilar. This paper proposed a classification system for this problem. The proposed system was developed based on the combination of kernel principal component analysis (KPCA) and support vector machines (SVMs). This system has been implemented in a two class face recognition problem. The average of the classification rate in this face image classification is 82.5%.

Addressing Water Quality Issues In Rural Cameroon With Household Biosand Filters, Laine Klopfensten, Laura Petrasky, Valerie Winton, Jeff Brown

Publications

This paper describes an ongoing collaboration between the Hope College student chapter of Engineers Without Borders – USA and the rural community of Nkuv in the Northwest Province of Cameroon related to improving drinking water quality using Manz biosand filters. The collaboration began in 2006 and focused on developing a community-based construction and distribution model for household water treatment units. Results from microbiology testing of the constructed filters indicate that this water treatment method is effective for improving water quality in rural areas. The results also highlight the need for ongoing assessment and adapting community education programs to provide necessary …

A Study Of The Correlation Of Sub-Aqueous Beach Profile Change And The Coastal Storm Impulse (Cosi) Parameter, Kevin Bryan Conner

Civil & Environmental Engineering Theses & Dissertations

The Coastal Storm Impulse (COSI) parameter is a recently developed storm-strength parameter that was first introduced at the San Diego, California International Conference of Coastal Engineering in 2006 (ICCE) and further examined in 2008 at the ICCE in Hamburg, Germany. This new parameter used the principles of conservation of horizontal momentum to combine storm characteristics such as surge, wave dynamics, currents, and duration into a relative scale used to classify and measure storm response and impacts. The resultant classification system was intended to evaluate potential coastal erosion and the associated loss of coastal infrastructure, as well as provide a storm …

Optimization Of Point-Of-Use Water Treatment Device For Disaster Relief, Margaret June Herzog

Master's Theses

Point-of-use (POU) drinking water treatment is a common method of providing drinking water in disaster relief situations when critical water infrastructure is damaged. In these cases, POU treatment devices can be used to treat local water until relief organizations set up more permanent water provision methods. One such POU technology is PŪR^® Purifier of Water, a combined coagulation/flocculation and disinfection chemical treatment sachet produced by Procter & Gamble. PŪR^® has been shown to treat contaminated water to meet water quality standards and guidelines set by the U.S. EPA for water purifiers and by the World Health Organization and …

A Petri Net Simulation Model For Virtual Construction Of Earthmoving Operations, F. F. Cheng, Y. W. Wang, Yong Bai

Civil and Environmental Engineering Faculty Research and Publications

A common and extended Petri net simulation framework for virtual construction of earthmoving operations is developed to simulate dynamic changes of workflow and information flow in the earthmoving construction process and illustrate the constraint relationship between various operational equipment and construction restrictions. The proposed framework considers factors that influence earthmoving operations including randomness of construction activities, individual preference of equipment scheduling, and constraint relationship between equipment and construction environment. With the given equipment availability and project indirect cost, the framework can predict construction situation, equipment utilization rate, estimated duration and cost to achieve visualized and intelligent scheduling of virtual construction …

Bs News March/April

Building Services Engineering

No abstract provided.

Mitigating Moisture Susceptibility In Hot-Mix Asphalt Concrete, Tom P. Nguyen

Master's Theses

Moisture damage in asphalt pavement has always been a problem for drivers, bicyclists, and pedestrians. The primary objective of this study is to evaluate moisture susceptibility of Hot-Mix Asphalt (HMA) and to investigate mitigation techniques using different antistripping agents. Three types of antistripping agents were used in this research investigation. Two of which are chemical based and the other is hydrated lime. The two types of liquid antistripping agents used in this study include Arr Maz CC LOF-6500 and Arr Maz CC XL-9000. These two liquid antistripping agents were tested at 0.25%, 0.50%, and 0.75%. Hydrated Lime was tested at …

Influence Of Nozzle Pressure, Standoff Distance, And Reinforcing Steel Cage On Water Jetting Of Cidh Pile Anomalies, Matthew Jason Schaffer

Master's Theses

The effectiveness of removing anomalous material from cast-in-drilled-hole (CIDH) piles by water jetting was examined.  The primary objectives of this research were to examine how reinforcing steel influences water jetting and to evaluate how jetting pressures and standoff distance from the material surface affect water jetting of concrete type materials and PVC tubing.  The experimental work consisted of water blasting submerged test specimens using rotary jets, nozzles, pumping equipment, and testing procedures currently used in construction practice.  The concrete test specimens were comprised of ring- and cylinder-shaped samples, containing materials with compressive strengths of approximately 160 and 3,600 psi.  Typical …

On The Interaction Between Bathymetry And Climate In The System Dynamics And Preferred Levels Of The Great Salt Lake, Ibrahim Nourein Mohammed, David G. Tarboton

Civil and Environmental Engineering Faculty Publications

The Great Salt Lake is a terminal lake whose level is determined by the balance between inflows and outflows. We examine the causes for multimodality in the distributions of lake level and hence volume and area that have previously been examined from a system dynamics perspective. We focus on the role of bathymetry in the dynamics of this system and show that some of the modes that are observed and that represent preferred system states are attributable to features of the bathymetry described using the topographic area‐volume relationship. Being a terminal lake, the only “outflow” is evaporation, which depends directly …

Meeting Engineering Program Objectives Through Service Learning Opportunities In Developing Countries, Jeffrey M. Plumblee, Lansford Bell, Leidy E. Klotz

Publications

The civil engineering profession, in an adaptive reaction to emerging roles for civil engineers, is recognizing the need for new engineers to possess a more robust skill set than just the typical design background. This paper describes the efforts of Clemson Engineers for Developing Countries (CEDC) to fulfill the more nontraditional and often unaddressed “learning outcomes” noted by ASCE’s Civil Engineering Body of Knowledge for the 21st Century as important prerequisites for licensure. The learning outcomes are addressed through ongoing international service learning projects in Cange, Haiti. The paper focuses on the following four outcomes and their fulfillment methods: leadership, …

Development Of An Open Source Bridge Management System, Michael H. Scott

TREC Final Reports

A bridge management system is developed using the Tcl scripting language in conjunction with the OpenSees finite element software framework. Fully programmable and string-based, Tcl is ideal for implementing live load analysis through scripts and experimenting with emergent bridge rating methodologies. Since Tcl is an interpreted language, the application also has the important advantage that new bridge capacity models and rating factor calculations can be implemented on multiple platforms without compiling source code. The network programming features of Tcl give the system access to databases for conducting internet-based bridge rating. The system is demonstrated for rating a conventionally reinforced concrete …

Health, Transportation, And The Built Environment: Building A Roadmap For Change With Smaller Cities, Cynthia Carlson, Semra Aytur, Kevin Gardner, Shannon Rogers

Civil Engineering Faculty Publications

Presentation at the 2011 Active Living Research Annual Conference.

Understanding The Impact Of Indot Projects On Automotive Industry Cluster Logistics Costs: A Case Study Of The Honda Plant, Ananth Iyer, Barry K. Partridge, Mary Pilotte, Pete Mast, Gerald Simms

JTRP Technical Reports

No abstract provided.

A Microsimulation Of Traffic, Parking, And Emissions At California Polytechnic State University – San Luis Obispo, Steven Michael Kilbert

Master's Theses

Traffic and parking congestion are significant issues at many universities nationwide. The delays experienced result in wasted time, money, and fuel for students, faculty and staff, not to mention the negative contributions to the environment. This paper quantifies the amount of vehicle emissions generated during an average morning peak hour in the university environment. Using VISSIM and CMEM microsimulation packages, a model is created for California Polytechnic State University- San Luis Obispo to aggregate the collective transportation behaviors and practices of the campus and recognize the implications these behaviors pose on the transportation network as a whole. Reasonable estimates are …

Risk Based Models For The Optimization Of Oil And Gas Supply Chain Critical Infrastructure, Kingsley Oseloka Achebe

Dissertations

The oil and gas sector faces a broad array of risks and uncertainties, affecting short- and long-term planning, and causing adverse effects in the energy sector. To predict and minimize them, risk based supply chain models were developed for the oil and gas supply chain critical infrastructure.

First, the events and activities were categorized as short term and long term, and their risk ratings derived, by analyzing data from past events and site visits. The result showed that events like the Israel – Arab war, successful hurricane, and production increase or decrease, had a risk rating of approximately 7.

Second, …

Application Of Mass/Stiffness Eccentricity To Control Response Of Structures Subjected To Earthquake Ground Motion, Bakhtiar Feizi

Dissertations

This dissertation is driven by the concept that engaging more modes in the response of structures can be used to mitigate its translational dynamic response. One such an approach is to engage torsional modes through engineered eccentricity (mass/stiffness eccentricity), thus, introducing coupled translation-rotation response. This idea was first introduced in a paper published by MacBain and Spillers in 2004. As a follow up to the same idea this dissertation was an attempt to investigate and develop the theory concerning the application of mass/stiffness eccentricity to control the translational motion of structures subjected to earthquake ground motion.

Different discrete and continuous …

Seismic Characterization Of Recycled Aggregate Concrete, Amin Jamali

Dissertations

There are significant environmental benefits of recycling waste concrete and reusing it as aggregate for structural concrete, but the use of Recycled Aggregate Concrete (RAC) is yet limited to non-structural applications such as road sub-base. Widespread application of RAC in areas such as seismic design requires an improved knowledge of RAC behavior under multiaxial state of stresses.

The main objective of this research is the characterization of seismic properties of RAC by developing a stress-strain model which can reasonably describe the behavior under both unconfined and confined conditions. An extensive experimental program, including testing of several plain RAC cylinders as …