Engineering Commons^™

ความต้านทานการซึมผ่านคลอไรด์ของมอร์ตาร์ที่ซ่อมแซมรอยร้าวโดยวิธีการตกตะกอนแคลเซียมคาร์บอเนตด้วยจุลินทรีย์, นัชชา นพคุณ

Chulalongkorn University Theses and Dissertations (Chula ETD)

งานวิจัยนี้ศึกษาการซึมผ่านคลอไรด์ของมอร์ตาร์ที่ได้รับการซ่อมแซมหลังเกิดรอยร้าวโดยใช้แบคทีเรียเอ็มไอซีพีสายพันธุ์ บาซิลลัส สฟีรีคัส ในรูปแบบหยดเซลล์ที่มีชีวิตพร้อมสารอาหาร (ปริมาณการหยดเชื้อแบคทีเรียต่อสารอาหารต่อวันเท่ากับ 20:500 µL และ 40:1000 µL) และรูปแบบไมโครแคปซูลสปอร์แบคทีเรีย (1% และ 2% โดยน้ำหนักปูนซีเมนต์) โดยศึกษาความกว้างรอยร้าวที่แตกต่างกัน 2 ขนาด คือ รอยร้าวขนาดไม่มากกว่า 175 µm และขนาดที่มากกว่า 175 แต่น้อยกว่า 350 µm จากการทดสอบพบว่าค่าการไหลแผ่ของมอร์ตาร์ที่ไม่ใช้แบคทีเรียเป็นไปตามมาตรฐานและต่ำกว่ากลุ่มมอร์ตาร์ที่ใช้รูปแบบไมโครแคปซูลถึง 12.0-14.6% จากนั้นหลังบ่มน้ำครบ 28 วัน นำไปทดสอบกำลังรับแรงอัด มอร์ตาร์ที่ไม่ใช้แบคทีเรียมีค่ากำลังรับแรงอัด 43.3 MPa สูงกว่ากลุ่มใช้รูปแบบไมโครแคปซูลถึง 15.1-23.8% จากนั้นหลังสร้างรอยร้าวบนชิ้นตัวอย่าง ทดสอบประสิทธิภาพการซ่อมแซมรอยร้าว โดยให้อยู่ภายใต้สภาวะเปียกสลับแห้งเป็นจำนวน 14 รอบ (1 รอบ = 48 ชั่วโมง) กลุ่มที่ใช้รูปแบบการหยดเซลล์ที่มีชีวิตพร้อมสารอาหารจะให้สัดส่วนการซ่อมแซมรอยร้าวสูงที่สุด ทั้งในรอยร้าวขนาดเล็กและใหญ่ โดยมีสัดส่วนการซ่อมแซม เท่ากับ 100% และ 62.1% ตามลำดับ ถัดมาในกลุ่มที่ใช้รูปแบบไมโครแคปซูล พบว่าการซ่อมแซมเพิ่มขึ้นอย่างรวดเร็วในช่วง 4 รอบแรกของการซ่อมแซม และเพิ่มขึ้นอย่างคงที่จนครบกำหนดการซ่อมแซม โดยสามารถซ่อมแซมรอยร้าวได้ 72.7% และ 47.7% สำหรับรอยร้าวขนาดเล็กและขนาดใหญ่ ตามลำดับ ในขณะที่กลุ่มที่ไม่ได้ใช้แบคทีเรียซ่อมแซมมีสัดส่วนการซ่อมแซมรอยร้างเพียง 17.8% และ 13.9%สำหรับรอยร้าวขนาดเล็กและขนาดใหญ่ ตามลำดับ จากนั้นได้นำชิ้นตัวอย่างมาทดสอบความต้านทานการซึมผ่านของคลอไรด์ พบว่า เมื่อสัดส่วนการซ่อมแซมรอยร้าวมากมีแนวโน้มทำให้ค่าสัมประสิทธิ์การซึมผ่านคลอไรด์ลดน้อยลง อาทิ กลุ่มที่ใช้รูปแบบเซลล์ที่มีชีวิตพร้อมสารอาหารมาก (40:1000 µL) ในรอยร้าวขนาดเล็กที่ซ่อมแซมได้ 100% มีสัมประสิทธิ์การซึมผ่านคลอไรด์ใกล้เคียงกับกลุ่มมอร์ตาร์ธรรมดาที่ไม่มีรอยร้าว รวมถึงปัจจัยสำคัญอื่นที่ส่งผลต่อการซึมผ่านของคลอไรด์ ได้แก่ ความกว้างรอยร้าวที่เหลืออยู่หลังการซ่อมแซม ความสามารถในการซ่อมแซมรอยร้าวตลอดความลึกภายในเนื้อมอร์ตาร์ และสารอาหารที่ใส่ลงขณะผสมที่ทำให้เกิดรูโพรงภายในเนื้อมอร์ตาร์ ปัจจัยเหล่านี้พบในกลุ่มตัวอย่างที่ใช้รูปแบบไมโครแคปซูล จึงส่งผลให้มีค่าสัมประสิทธิ์การซึมผ่านคลอไรด์ที่สูงกว่ากลุ่มที่ใช้รูปแบบหยดเซลล์ที่มีชีวิตพร้อมสารอาหาร

Strain Gradient Shear Deformation Microshells: Formulation, Isogeometric Analysis, And Optimization, Toan Minh Le

Chulalongkorn University Theses and Dissertations (Chula ETD)

The rapid development of micro-electro-mechanical system (MEMS) technology has empowered the fabrication of micro-sized, light weighted, and flexible thin-walled components. Due to the complex inherent physics and costly experiments at the microscale, reliable theoretical and numerical instruments for modeling and assisting the design of these innovative structures become desirable. This thesis, therefore, devotes to proposing a general strain-gradient-based shell model, a robust computational formulation, and efficient optimization approaches for microshells. The heart of the novel microshell model is based on the integration between the complete type-II formulation of Mindlin’s strain gradient elasticity, in which the importance of both strain-gradient and …

A Risk-Based System For Managing Construction Claim Causes: An Integrated Interpretative Structural Modeling And Bayesian Network Approach, Sang Quang Van

Chulalongkorn University Theses and Dissertations (Chula ETD)

Claims are troublesome and often lead to adverse impacts on construction projects, such as delays, cost overruns, and disputes among contracting parties. Numerous studies have been conducted to improve the understanding of claim causes; however, most previous research works have investigated claim causes individually and ignored the interdependences among claim causes. In addition, the determination of response strategies and methods for claim causes has scarcely been addressed. This research develops a risk-based system for managing claim causes in building construction projects. The main objectives of this research are twofold: (1) to quantify the impacts of claim causes considering their interdependences, …

Analysis Of Shear Failure In Ultra-High Performance Concrete Beams, Kevin Conway

Electronic Theses and Dissertations, 2020-2023

Ultra-high performance concrete (UHPC) is an emerging cementitious material type currently undergoing research in different structural applications. This material is characterized by a compressive strength of 150 MPa (22 ksi), according to the Association Francaise de Genie Civil and the Federal Highway Administration, high tension strength, and high durability. Additionally, UHPC consists of secondary reinforcement in the form of steel or polymeric fibers, which enable UHPC to exhibit tension hardening behavior and tension ductility previously ignored in conventional concrete mixes. Previous research has focused on applications in the transportation and bridge design industries; however, applications in buildings and other heavy …

Testing The Influence Of Water Depth In Design Of Created Oyster Reef For Living Shoreline Applications, Peter Vien

Electronic Theses and Dissertations, 2020-2023

Living shoreline stabilization has become a popular practice in shoreline restoration and bank protection; however, there are still many uncertainties regarding effective site design using living materials. For example, natural wave-breaks may be formed of created reefs, but the optimum water depth for hydrodynamic influence may differ from the preferred depth to ensure organism recruitment. The objective of this research is to understand how water depth relative to the crest of submerged artificial oyster reef structures influences nearshore hydrodynamic processes and sediment transport or retention in nearshore areas. A field study, sited in a microtidal estuary on the Atlantic coast …

A Deep Learning Approach For Spatiotemporal-Data-Driven Traffic State Estimation, Amr Hatem Ragaa Abdelraouf

Electronic Theses and Dissertations, 2020-2023

The past decade witnessed rapid developments in traffic data sensing technologies in the form of roadside detector hardware, vehicle on-board units, and pedestrian wearable devices. The growing magnitude and complexity of the available traffic data has fueled the demand for data-driven models that can handle large scale inputs. In the recent past, deep-learning-powered algorithms have become the state-of-the-art for various data-driven applications. In this research, three applications of deep learning algorithms for traffic state estimation were investigated. Firstly, network-wide traffic parameters estimation was explored. An attention-based multi-encoder-decoder (Att-MED) neural network architecture was proposed and trained to predict freeway traffic speed …

Automated Vehicle To Vehicle Conflict Analysis At Signalized Intersections By Camera And Lidar Sensor Fusion, Alabi Mehzabin Anisha

Electronic Theses and Dissertations, 2020-2023

This research presents an approach for safety diagnosis using sensor fusion techniques. This work fuses the outputs of a roadside low-resolution camera and a solid-state LiDAR. For vehicle classification and detection in videos, the YOLO v5 object detection model was utilized. The raw 3D point clouds generated by the LiDAR are processed by two manual steps - ground plane transformation and background segmentation, and two real-time steps - foreground clustering, and bounding box fitting. Taking the generated 2D bounding boxes of both camera and LiDAR, we associate the common bounding box pairs by thresholding on the Euclidean distance threshold of …

Assessing Public Perception And Proposing An Organized Questionnaire For The Deployment And Adoption Of Autonomous Vehicles, Md Rakibul Islam

Electronic Theses and Dissertations, 2020-2023

Since the general public will play a central role in the evolution of AVs, research has been performed to assess their perception and acceptance of AVs. Nevertheless, the most potential users of AVs, i.e., young, students, and more educated people, have not received any particular focus in those studies. This research gap has motivated us to assess their perceptions. Extensive data analyses of the survey at the University of Central Florida with a sample of 315 reveal that on average 57% of the respondents were familiar with AVs, and about 44% of the respondents felt positive perceptions toward AVs. Around …

Development Of A Decision-Making Tool For Prediction Of Rainfall-Induced Landslides, Faisal Shakib Ahmed

Theses and Dissertations--Civil Engineering

Landslides are frequently observed in mountainous places following prolonged periods of rain, frequently resulting in substantial topography changes. They pose a significant risk to human lives and the built environment globally, particularly in areas prone to excessive rainfall. While slope failures can occur because of human-caused factors such as slope loading or toe cutting for construction purposes, many failures occur because of rainfall penetrating an otherwise stable slope. A greater understanding of the characteristics and mechanics of landslides is consequently critical for geotechnical research, particularly in evaluating prospective mitigation strategies. The potential of slope failure is a primary consideration when …

Sewer Vapor Intrusion Pathway: Simulation Of Indoor Piping Systems And Operation Of Aroma-Voc Gas Analyzer, Hong Cheng Tay

Theses and Dissertations--Civil Engineering

Vapor Intrusion (VI) is a transport phenomenon that occurs when contaminants migrate from sub-surface sources into indoor spaces. Sewer tunnels, plumbing connections, and piping infrastructures can be important contributors to an increased potential of VI in a site, which results in indoor concentrations of volatile organic compounds (VOC). In the present work, the topic of sewer VI pathways were investigated through a prototype made from various types of indoor plumbing pipe fittings. This prototype simulates indoor piping systems and determine whether air and VOC were escaping through the pipe fittings. Moreover, this study is the first effort to use a …

Investigation Of Pfas Exposure Risks In Kentucky Using Mapping Tools, Sweta Ojha

Theses and Dissertations--Civil Engineering

Per- and polyfluoroalkyl substances (PFAS), a group of environmentally-persistent compounds, are environmentally ubiquitous and challenging to remediate. Several studies show that PFAS are detected in drinking water systems when sampling is conducted, making human exposure via drinking water an important health consideration. This research: 1) develops a mapping tool for prioritizing sampling locations; 2) establishes a method for making GIS data and meta(data) in the mapping tool accessible; 3) fosters decision making by integrating knowledge brokering and the alignment interest and influence matrix (AIIM). The tool developed is this research is a geospatial and statistical PFAS hot-spot screening model that …

Load And Pressure Distribution As A Function Of Dynamic Contact Stress At The Railroad Crosstie-Ballast Interface, Habib Abdil Unluoglu

Theses and Dissertations--Civil Engineering

Excessive crosstie wear and abrasion and ballast wear and fouling are two of the fundamental problems contributing to inadequate railroad track performance. This adversely affects the attainment and long-term maintenance of desired track geometric requirements. The magnitudes and distribution of the stresses at the crosstie-ballast (CT-B) interface must be known to determine the stress distribution on the ballast. However, the stresses at the top of the ballast often vary significantly. This study examines a new approach to predicting dynamic contact pressures at the interface of crosstie and ballast using the ‘square wave theory.’ A data set of in-track CT-B interfacial …

Understanding The Differences Between Industry Objectives And Institutional Learning, Kristen Schell

Theses and Dissertations--Civil Engineering

To combat understaffing in the construction industry, it is necessary to employ the best candidates possible. By identifying the most desirable skills in a construction employee from an industry perspective, institutional learning can better prepare graduates for the construction workforce. Currently there exists an information gap in the objectives of the construction industry and institutional learning. This gap produces graduates, professors, and employers with expectations that do not align. Reducing this gap will aid in the success of hiring recently graduated construction students who can meet the ever-changing demands of the industry. Construction students who are fresh out of college …

Kinematics And Preliminary Fema P-695 Evaluation Of The Newz-Breakss Steel Boundary Frame With Buckling Restrained Brace Structural Fuses, Alexander M. Baker

Dissertations, Master's Theses and Master's Reports

Buckling Restrained Braced Frames (BRBFs) have become a popular seismic force resisting system (SFRS) due to their high ductility and energy dissipation. However, BRBFs are also susceptible to large residual drifts, which can make repair difficult. Efforts to reduce the residual drift of BRBFs typically involve special self-centering braces, or by using a dual system in tandem with the BRBF. This study proposes an alternative approach, in which a self-centering steel rocking frame is used as the boundary frame for the BRBF. The proposed system, called the NewZ-BREAKSS Buckling Restrained Braced Frame (NZ-BRBF) utilizes the recently proposed NewZ-BREAKSS (NZ) boundary …

Using Stream Restoration To Mitigate Stormwater Runoff In An Urban Watershed: A Case Study, Jonathan M. Brantley

Theses and Dissertations--Biosystems and Agricultural Engineering

The goal of this case study was to evaluate the effectiveness a 275 m regenerative stream restoration design to mitigate stormwater runoff in a highly urbanized watershed. The restoration resulted in a wide, wetland-like floodplain, comprised of a rock base that was overtopped with a filtration media (approximately 30% woodchips and 70% topsoil). The creation of the floodplain-wetland complex in tandem with filtration media lead to increased storage capacity and an increase in hyporheic exchange within the system. Significant reductions were found for the storm hydrograph parameters volume, peak discharge, and time to peak. Reductions in baseflows were also noted …

Non-Destructive Characterization Of Bio-Cemented Soils Via Seismic Wave Measurement, Kyle Best

Williams Honors College, Honors Research Projects

The final outcome of this project is to examine the mechanical and resulting physical properties of bio-treated soil through microbial activity via non-destructive testing by seismic waves. The proposed bio-treatment strategy is through supplying specific nutrients for indigenous microbes within a soil specimen which in return produce calcium carbonates. The bio-minerals produced during these biogeochemical activities will improve the mechanical properties of soil by making cementation between soil grains. Additionally, a theoretical laboratory experimentational description will be provided to explain any associative effects on a specimen's water permeability or mechanical strength due to bio-mineralization within the samples. The characterization of …

An Analytical Network Process (Anp) Model For Choosing Optimal Public-Private Partnership (Ppp) Contract Types For Infrastructure Projects, Su Lae Yee Zaw

Chulalongkorn University Theses and Dissertations (Chula ETD)

With the rapid social and economic development, a great deal of expenditure is crucial for the nation's infrastructure development. Nevertheless, the governments of many developing nations have been experienced with the limited budget and technical inability to deliver effective public infrastructures. Public-private partnership (PPP) has been adopted as an alternative collaboration arrangement between the government and the private sector in many nations to overcome these challenges. PPP can be defined as a long-term contract between a public agency and a private entity for rendering public facilities, including design, construct, finance, operate, and manage the project. The PPP contract types can …

Spatiotemporal Analysis Of Taxi And Transportation Network Companies (Tnc) Demand In The Wake Of Covid-19, Dewan Ashraful Parvez

Electronic Theses and Dissertations, 2020-2023

The objective of the thesis is to understand the factors affecting spatiotemporal ridehailing demand patterns as the COVID-19 pandemic has evolved. Specifically, the current study examines the key contributing factors of weekly ridehailing demand by employing Taxi and Transportation Network Companies (TNC) trip data from January 2019 through December 2020 for New York City. The ridehailing demand is partitioned across four time periods including Morning Peak, Morning Off Peak, Evening Peak and Evening Off Peak to accommodate for the time-of-day specific variations. Drawing on the high-resolution NYC data, the current study developed pooled spatial panel models to accommodate for the …

Development Of Active Learning Data Fixing Tool With Visual Analytics To Enhance Traffic Near-Miss Diagnosis, Jinyu Pei

Electronic Theses and Dissertations, 2020-2023

This study proposes a software to upgrade the UCF SST's Automated Roadway Conflicts Identification System (ARCIS), a pixel-to-pixel manner automated safety diagnostics and conflict identification system. The system is developed to extract vehicles' trajectories and traffic parameters using unmanned aerial vehicles (UAV) video and utilizing deep learning techniques. A user-friendly tool to improve rapid system development with active-learning, data analysis, and visualization techniques is introduced, which is capable of traffic safety near-miss diagnostics based on the ARCIS output. Multiple approaches are used to enhance the system performance, including video stabilization, object filtering, stitching multiple videos, vehicle detection and tracing. In …

Review Of Innovative Rehabilitation Techniques For Reinforced Concrete Buildings, Demetrius Karoubas

Graduate Theses, Dissertations, and Problem Reports (ETD)

Building rehabilitation encompasses the act of repairing damaged structural elements, as well as the upgrading of older buildings to bring them up to modern standards. In recent years, due to the extreme economic and environmental cost of new construction, building rehabilitation is gaining ground as the most viable solution to the problem posed by damaged or substandard buildings. With the constant development of new materials with favorable properties and the improvement of our understanding of earthquakes, new rehabilitation techniques are being developed, improving on the efficiency and effectiveness of older ones. Reinforced Concrete (RC) buildings are a type of building …

Finite Element Method Calculation Of A Prestressed Self Consolidating Concrete Beam, Vladyslav Machulsky

Graduate Theses, Dissertations, and Problem Reports (ETD)

In this study, a prestressed concrete box beam produced for the Stalnaker Run Bridge (SRB) replacement project using self-consolidating concrete (SCC) was simulated using finite element method (FEM) numerical technique. ANSYS, a commercial FEM software, was used to build the prestressed SCC box beam model. The FEM model was developed to understand the behavior of concrete and steel under prestressing loads, long-term effects, and superimposed loads. The SOLID65 and REINF264 element types were chosen to simulate the behavior of concrete and steel materials. Experimentally measured mechanical properties of concrete from the SRB project were used in the analysis allowing for …

Stormwater Sensitivities To The Climatic And Land Cover Drivers In A Heavily Urbanized Coastal Basin Along The Northern Gulf Of Mexico, Usa., Md Faisal Razy

Graduate Theses, Dissertations, and Problem Reports (ETD)

Stormwater runoff response in a complex coastal-urban basin varies with the changes in climatic and land cover drivers. This thesis aims to assess the runoff responses to variation in climatic and land cover variables and perform a sensitivity analysis in complex coastal-urban basins. The Buffalo San Jacinto Basin (BUSJ) of southeast Texas, USA was considered a pilot study area for this research. BUSJ is a heavily urbanized coastal basin, draining an area of 3132 km² through the City of Houston, Texas into the northern Gulf of Mexico, USA. A process-based hydrological model was developed with fine spatio-temporal resolutions for …

Expanding The Applicability Of Press-Brake-Formed Tub Girders Through The Extension Of The Maximum Span Length And The Evaluation Of Pier Continuity, Robert M. Tennant

Graduate Theses, Dissertations, and Problem Reports (ETD)

The Short Span Steel Bridge Alliance (SSSBA) is a group of bridge and buried soil steel structure industry leaders who provide educational information on the design and construction of short-span steel bridges in installations up to 140 feet in length. Within the SSSBA technical working group, a modular, shallow press-brake-formed tub girder (PBFTG) was developed to address the demand in the short-span steel bridge market for rapid infrastructure replacement solutions. PBFTGs consist of modular, shallow, trapezoidal boxes fabricated from cold-bent structural steel plate. A concrete deck, or other deck option, may be placed on the girder, and the modular unit …

Analysis Of Spatial Discrepancies Between 76-Foot Close Range Photogrammetric And Terrestrial-Lidar Models, Abdoul K. Ouangre

College of Graduate Studies: Theses & Dissertations

This study presents an analysis of the accuracy of a 3D model generated by two different methods. In the first method, the 3D model is generated via Laser Scanning. In the second method, the 3D model is generated via Close-range Photogrammetry from a drone flying at 76 feet above the ground. Photogrammetry is a photo-based technique that uses images to generate 3D models of objects where distances could be extracted from. Close-range photogrammetry is the approach of generating a 3D model from a camera placed anywhere between 1 foot and 1000 feet relative to the object. Terrestrial LiDAR is the …

Corrosion Resistance Performance Investigation Of Mild Steel Bar Coated With Magnesium Phosphate Cement Paste, Fan Zhang

Doctoral Dissertations

"In this research study, the anti-corrosion mechanism of reinforcement embedded in magnesium potassium phosphate cement (MKPC) is explored. In addition, one type of additives, metakaolin, and one type of retarder, boric acid, are employed in MKPC to modify its properties in order to further investigate corrosion resistance and to achieve mass-production coating reinforcement at the work site. This coating method may be practical for some underwater construction and some traditional reinforcement concrete structures to reduce the reinforcement corrosion rate and to eventually extend service life in both repair and new construction applications.

By comparing the electrochemical properties of bare ribbed …

Multifunctional Behaviors Of Two-Dimensional Materials And Their Composites, Yanxiao Li

Doctoral Dissertations

"Two-dimensional (2D) materials, including graphene, transition metal carbides or nitrides (TMC/Ns), have rich surface chemistry, superb electrical and mechanical properties. These unique properties make them ideal for multifunctional devices. Among them, we focused on graphene and TMC/Ns (i.e., MXenes), as well as their composites. Unlike the well-known graphene, MXenes, are relatively new and typically synthesized by the selective etching of the “A” layers from the layered carbides and /or nitrides known as MAX phases, which introduce MXenes with rich terminal groups (e.g. -O-, -OH, -F).

During my Ph.D. study, firstly, the adhesive and frictional behaviors, which are related to successful …

North 14th Street Corridor Improvements Project, Ashley Nguyen, Samantha Corey, Maricela Paramo Reyes, Pooja Rajeev

Honors Program: Senior Projects (Public)

The following project report was a study of the North 14^th Street corridor ranging from Adams Street to Virginia Street conducted by University of Nebraska-Lincoln students for a senior design capstone project. Main focuses of the project were the intersection of Adams and 14^th Street and the 14^th Street bridges over Cornhusker Highway and Oak Creek. Study of this area included work in transportation, traffic, structural, geotechnical, water resources, and environmental engineering. However, this report done by students should not take the place of work done by licensed professional engineers.

This project was done in collaboration with …

Comparative Analysis Of Bridge Abutment Types, David Fell

Williams Honors College, Honors Research Projects

This project was developed to serve as a brief overview of design practices and considerations in the selection of highway bridge abutment types. This involved a review of literature in the form of reviewing national design guides and department of transportation (DOT) requirements from both US DOTs and international DOTs. The abutment types covered in this research included conventional reinforced concrete abutments with bearings, integral abutments, and semi-integral abutments. This research focused solely on highway bridge abutments, particularly on Ohio Department of Transportation design requirements due to their extensive use of semi-integral abutments. Superstructure elements and geometric requirements are primary …

Improving Traffic Efficiency At Tallmadge Circle Considering Autonomous Vehicles, Benjamin Mallinak

Williams Honors College, Honors Research Projects

In a set of behavioral recommendations outlined by the National Highway Traffic Safety Administration (NHTSA), navigating a roundabout is listed as one of twenty-eight regularly required abilities that a highly automated vehicle must be able to complete. As autonomous vehicle technology is developed, refined, and proven to meet these ability expectations, roundabouts and traffic circles that experience high volumes of traffic are anticipated to benefit from an improved efficiency of traffic flow. For Tallmadge Circle and other similar traffic control configurations, the degree of improvement will be dependent on the steps taken to utilize the capabilities of the autonomous vehicles …

Sustainability And Environmentally Friendly Methods To Travel Over Waterways, Kendall Kubus

Williams Honors College, Honors Research Projects

Throughout daily traveling, the main structures used are bridges and tunnels. Bridges are used as overpasses over valleys, canyons, and areas that require a large amount of dirt fill to bring the roadway up to the proper grade. Tunnels are underpasses through mountains, under city limits and waterways. The benefits of building a bridge structure is little preparation goes into earth-work and the transportation of aggregate materials. There is some time spent testing surrounding soil to determine the process that will need to occur for foundation preparations in bridge columns. Options for foundation include different types of drilled shafts, caissons, …