Engineering Commons^™

The Use Of Two-Phase Molecular Dynamics Simulations To Determine The Phase Behavior And Critical Point Of Propane Molecular Models, Sonal Patel, W. Vincent Wilding, Richard L. Rowley

Faculty Publications

Molecular dynamics simulations were performed to determine two-phase configurations of model propane molecules below the critical point and in the near-critical, two-phase region. A postprocessor that uses a Monte Carlo method for determination of volumes attributable to each molecule was used to obtain density histograms of the particles from which the bulk coexisting equilibrium vapor and liquid densities were determined. This method of analyzing coexisting densities in a two-phase simulation is straightforward and can be easily implemented for complex, multisite models. Various degrees of internal flexibility in the propane models have little effect on the coexisting densities at temperatures 40 …

Anti-Neuroblastoma Activity Of Gold Nanorods Bound With Gd2 Monoclonal Antibody Under Near-Infrared Laser Irradiation, Ching-An Peng, Chung-Hao Wang

Michigan Tech Publications, Part 1

High-risk neuroblastoma is one of the most common deaths in pediatric oncology. Current treatment of this disease involves a coordinated sequence of chemotherapy, surgery, and radiation. Further advances in therapy will require the targeting of tumor cells in a more selective and efficient way so that survival can be improved without substantially increasing toxicity. To achieve tumor-selective delivery, disialoganglioside (GD2) expressed by almost all neuroblastoma tumors represents a potential molecular target that can be exploited for tumor-selective delivery. In this study, GD2 monoclonal antibody (anti-GD2) was conjugated to gold nanorods (GNRs) which are one of anisotropic nanomaterials that can absorb …

2011-2012 Che Newsletter, Department Of Chemical Engineering, Michigan Technological University

Department of Chemical Engineering Newsletters

Table of Contents

• Department
• Bioengineering Research
• Student News
• Alumni and Friends

Conference Program, Ted Knowlton

10th International Conference on Circulating Fluidized Beds and Fluidization Technology - CFB-10

No abstract provided.

Reflections On Mathematical Models And Simulation Of Gas-Particle Flows, Sankaran Sundaresan

10th International Conference on Circulating Fluidized Beds and Fluidization Technology - CFB-10

No abstract provided.

Gas Tracer Study In A Non Mechanical L-Valve, Mohammad-Mahdi Yazdanpanah, Ali Hoteit, Ann Forret, Thierry Gauthier, Arnaud Delebarre

10th International Conference on Circulating Fluidized Beds and Fluidization Technology - CFB-10

No abstract provided.

New System For The Continuous Removal Of Bio-Char From Bubbling Bed Pyrolyzers, Craig Mara, Lorenzo Ferrante, Franco Berruti, Cedric Briens

Bioenergy III: Present and New Perspectives on Biorefineries

No abstract provided.

Latest Developments On Application Of Heterogenous Basic Catalysts For An Efficient And Eco Friendly Synthesis Of Biodiesel: A Review, Yogesh C. Sharma, Bhaskar Singh, John Korstad

College of Science and Engineering Faculty Research and Scholarship

Heterogeneous catalysts are now being tried extensively for biodiesel synthesis. These catalysts are poised to play an important role and are perspective catalysts in future for biodiesel production at industrial level. The review deals with a comprehensive list of these heterogeneous catalysts which has been reported recently. The mechanisms of these catalysts in the transesterification reaction have been discussed. The conditions for the reaction and optimized parameters along with preparation of the catalyst, and their leaching aspects are discussed. The heterogeneous basic catalyst discussed in the review includes oxides of magnesium and calcium; hydrotalcite/layered double hydroxide; alumina; and zeolites. Yield …

Electrochemical Investigation Of Chromium Nanocarbide Coated Ti-6al-4v And Co-Cr-Mo Alloy Substrates, Viswanathan Swaminathan, Haitong Zeng, Daniel Lawrynowicz, Zongtao Zhang, Jeremy L. Gilbert

Biomedical and Chemical Engineering - All Scholarship

This study investigated the electrochemical behavior of chromium nano-carbide cermet coating applied on Ti–6Al–4V and Co–Cr–Mo alloys for potential application as wear and corrosion resistant bearing surfaces. The cermet coating consisted of a highly heterogeneous combination of carbides embedded in a metal matrix. The main factors studied were the effect of substrate (Ti–6Al–4V vs. Co–Cr–Mo), solution conditions (physiological vs. 1 M H₂O₂ of pH 2), time of immersion (1 vs. 24 h) and post coating treatments (passivation and gamma sterilization). The coatings were produced with high velocity oxygen fuel (HVOF) thermal spray technique at atmospheric conditions to …

Fluidized Bed Pyrolysis Of Lignin In A Bubbling Bed Reactor, Pietro Palmisano, Valentina Lago, Franco Berruti, Cedric Briens

Bioenergy III: Present and New Perspectives on Biorefineries

No abstract provided.

Meat And Bone Meal Pyrolysis Study In A Laboratory-Scale Bubbling Fluidized Bed Reactor, Federico M. Berruti, Lorenzo Ferrante, Cedric Briens, Franco Berruti

Bioenergy III: Present and New Perspectives on Biorefineries

No abstract provided.

Effects Of Biochar On Products Yields During Biomass Pyrolysis In A Bubbling Bed Reactor, Pietro Palmisano, Franco Berruti, Cedric Briens

Bioenergy III: Present and New Perspectives on Biorefineries

No abstract provided.

Physical Impact Of Waterjet-Based Sediment Remediation On Benthic Organisms, Grace Harper, Andrew Curtis Elmore, Christopher Redell, Gavin Risley, Joel Gerard Burken

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Adding Activated Carbon to Sediments Has Been Shown to Be an Effective Means of Reducing the Bioavailability of Certain Contaminants. the Current State of the Practice is to Mechanically Mix Activated Carbon to a Target Concentration of 3 Percent at Depths of Approximately 30 Cm using a Rotovator or Similar Construction Equipment. Waterjets Have Been Used to Cut Hard Material using a Mixture of Water and an Abrasive. If Activated Carbon is Substituted for the Abrasive, Waterjets Have the Potential to Use Surface Injection as a Replacement for Mechanical Mixing during Sediment Remediation. a Perceived Benefit of Waterjet-Based Sediment Remediation …

Development Of A Waterjet System For Direct Delivery Of Granular Iron And Activated Carbon To Remediate Contaminated Aqueous Sediments, Gavin H.R. Risley, Andrew Curtis Elmore, Joel Gerard Burken, Grzegorz (Greg) Galecki

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

While the Techniques and Technologies Associated with Contaminated Sediment Remediation Are Relatively Mature, There Are Several Issues Associated with These Practices that Make Them Unattractive. the Inability of Currently Used Mechanical Mixing Implements to Place Amendments in Aqueous Environments and their Intrusive Behavior toward Benthic Communities Are Just Two Examples of a Necessity for an Improved Delivery Method. Waterjets May Be a Viable Option for Placement of Particulate Remediation Amendments, Such as Activated Carbon and Granular Iron, at Depth. a Custom Waterjet Nozzle and Injection System Has Been Fabricated by the Authors to Examine This Delivery Concept. the Developed Injection …

Advancements In Solid Acid Catalysts For Ecofriendly And Economically Viable Synthesis Of Biodiesel, Yogesh C. Sharma, Bhaskar Singh, John Korstad

College of Science and Engineering Faculty Research and Scholarship

Solid acid (heterogeneous) catalysts have a unique advantage in esterification and transesterification reactions which enhances the use of high acid value oil to be used as feedstock for synthesis of biodiesel. Various solid acid catalysts such as resins, tungstated and sulfated zirconia, polyaniline sulfate, heteropolyacid, metal complexes, sulfated tin oxide, zeolite, acidic ionic liquid, and others have been explored as potential heterogeneous catalysts. The activity of the catalyst differs slightly resulting in moderate to high conversion and yield. The reuse of the solid catalyst is governed by their deactivation, poisoning, and the extent of leaching in the reaction medium. The …

A Critical Review On Recent Methods Used For Economically Viable And Eco-Friendly Development Of Microalgae As A Potential Feedstock For Synthesis Of Biodiesel, Yogesh C. Sharma, Bhaskar Singh, John Korstad

College of Science and Engineering Faculty Research and Scholarship

Microalgae are being considered as a viable feedstock for large-scale production of biodiesel. However, though it may look simpler to obtain lipids from microalgae, the overall process of choosing an algal strain, cultivation, harvesting, dewatering, and extraction of oil is quite complicated and not economically prudent at this time. A thorough understanding of algae and the overall biodiesel production process discussed in this paper is vital so that focused research might lower the costs involved. Various diverse species of microalgae are currently being used as feedstocks for biofuel. Heterotrophic culture may be preferred over photoautotrophic cultivation. For cultivation, specially fabricated …

Modeling Diverse Physics Of Nanoparticle Self-Assembly In Pulsed Laser-Irradiated Metallic Films, Mikhail Khenner

Mathematics Faculty Publications

Presents physics behind dewetting of thin liquid films and mathematical/computational modeling tools (Educational/Research presentation for senior physics majors).

Stability Of A Strongly Anisotropic Thin Epitaxial Film In A Wetting Interaction With Elastic Substrate, Mikhail Khenner, Wondimu T. Tekalign, Margo S. Levine

Mathematics Faculty Publications

The linear dispersion relation for longwave surface perturbations, as derived by Levine et al. Phys. Rev. B 75, 205312 (2007) is extended to include a smooth surface energy anisotropy function with a variable anisotropy strength (from weak to strong, such that sharp corners and slightly curved facets occur on the corresponding Wulff shape). Through detailed parametric studies it is shown that a combination of a wetting interaction and strong anisotropy, and even a wetting interaction alone results in complicated linear stability characteristics of strained and unstrained films.

Stability Of A Strongly Anisotropic Thin Epitaxial Film In A Wetting Interaction With Elastic Substrate, Mikhail Khenner, Wondimu Tekalign, Margo Levine

Mathematics Faculty Publications

The linear dispersion relation for longwave surface perturbations, as derived by Levine et al. Phys. Rev. B 75, 205312 (2007) is extended to include a smooth surface energy anisotropy function with a variable anisotropy strength (from weak to strong, such that sharp corners and slightly curved facets occur on the corresponding Wulff shape). Through detailed parametric studies it is shown that a combination of a wetting interaction and strong anisotropy, and even a wetting interaction alone results in complicated linear stability characteristics of strained and unstrained films.

Computational Models Of Chemical Systems Inspired By Braess’ Paradox, Dante Lepore, Carl Barratt, Pauline Schwartz

Chemistry and Chemical Engineering Faculty Publications

Systems chemistry is a new discipline which investigates the interactions within a network of chemical reactions. We have studied several computational models of chemical systems inspired by mathematical paradoxes and have found that even simple systems may behave in a counterintuitive, non-linear manner depending upon various conditions. In the present study, we modeled a set of reactions inspired by one such paradox, Braess’ paradox, an interesting phenomenon whereby the introduction of additional capacity (e.g. pathways) in some simple network systems can lead to an unexpected reduction in the overall flow rate of “traffic” through the system. We devised several chemical …

Reinforced Chitosan-Based Heart Valve Scaffold And Utility Of Bone Marrow-Derived Mesenchymal Stem Cells For Cardiovascular Tissue Engineering, Mohammad Z. Albanna

Wayne State University Dissertations

Recent research has demonstrated a strong correlation between the differentiation profile of mesenchymal stem cells (MSCs) and scaffold stiffness. Chitosan is being widely studied for tissue engineering applications due to its biocompatibility and biodegradability. However, its use in load-bearing applications is limited due to moderate to low mechanical properties. In this study, we investigated the effectiveness of a fiber reinforcement method for enhancing the mechanical properties of chitosan scaffolds. Chitosan fibers were fabricated using a solution extrusion and neutralization method and incorporated into porous chitosan scaffolds. The effects of different fiber/scaffold mass ratios, fiber mechanical properties and fiber lengths on …

Methodological Study On Technology Integration For Sustainable Manufacturing In The Surface Finishing Industry, Tamer Girgis

Wayne State University Dissertations

Today, industries explore advanced techniques to enhance their development efforts to meet the goals of sustainability due to various challenges which is caused by industrial globalization, high energy and raw material costs, increased environmental regulations and social pressures, and new technological innovations. In order for an industrial process to become sustainable, it is essential to improve the process inputs efficiency from raw materials and energy while maintaining highest productivity and quality; in addition to, minimizing waste generation and the impact on the environment. Engaging in industrial sustainability requires major efforts from decision makers to implement advanced technologies to satisfy each …

Impact Of Porogens On The Pore Characteristics Of Zirconia Particles Made By Polymer-Induced Colloid Aggregation, Abhinandan Pattanayak, Anuradha Subramanian

Anuradha Subramanian Publications

Zirconia particles were prepared from a 20% colloidal sol (ZrO₂) by the polymer-induced colloid aggregation (PICA) process, both in the presence and absence of porogens. Specifically, porous zirconia particles having varying porosity were prepared by a two-step protocol wherein a porogen was first embedded during the particle synthesis, followed by its removal in a subsequent step. In this research study, the ability of four different types of porogens, viz. fumed silica, micronized high molecular weight polyethylene emulsion ME09730, and microcrystalline waxes ME48040M2 and ME98040M1, to impact the pore size, porosity, and pore area were investigated. Particle morphology and …

Hydration Repulsion Effects Of The Formation Of Supported Lipid Bylayers, Selver Ahmed, Rajesh Raman Madathingal, Stephanie L. Wunder, Yanjing Chen, Geoffrey D. Bothun

Chemical, Biomolecular, and Materials Engineering Faculty Publications

When zwitterionic lipids fuse onto substrates such as silica (SiO₂), the water of hydration between the two approaching surfaces must be removed, giving rise to an effective hydration repulsion. Removal of water around the polar headgroups of the lipid and the silanols (SiOH) of SiO₂ allows supported lipid bilayer (SLB) formation, although an interstitial water layer remains between the lipid and surface. The importance of hydration repulsion in SLB formation is demonstrated by monitoring fusion of zwitterionic lipids onto silica (SiO2) nanoparticles heat treated to control the silanol group (SiOH) density and thus the amount of bound …

Multicomponent Folate-Targeted Magnetoliposomes: Design, Characterization, And Cellular Uptake, Geoffrey D. Bothun, Alline Lelis, Yanjing Chen, Kyle Scully, Linnea E. Anderson, Matthew A. Stoner

Chemical, Biomolecular, and Materials Engineering Faculty Publications

Folate-targeted cationic magnetoliposomes (FTMLs) have been prepared with coencapsulated doxorubicin (DOX) and anionic superparamagnetic iron oxide (SPIO) nanoparticles (NPs) with 5 nm γ-Fe₂O₃ cores and 16 nm hydrodynamic diameters. NP encapsulation (89%) was confirmed by cryogenic transmission electron microscopy (TEM), and the presence of the oppositely charged NPs did not cause liposome aggregation. The FTMLs had an average diameter of 174 ± 53 nm and existed as unilamellar and cup-shaped liposomes, which was attributed to dissimilar lipid packing parameters and the presence of PEG-lipids. A 3-fold increase in DOX release was achieved over 2 hours when the …

Investigation Of Microbubble/Droplet Formation In Cross-Flow And Co-Flow Micro Devices, Tom J. John

Doctoral Dissertations

The primary goal of the work presented in this dissertation is to generate microbubbles of a diameter of less than 15μm inside micro channels. In order to achieve this detailed understanding, the facts and limitations behind the generation of microbubbles inside a micro channel are determined from existing literature. The major limitations of the current bubble/droplet generators are found to be the bubble confinement effect, the merging of bubbles, the difficulty in determining bubble diameter and the need for smaller channels to generate smaller bubbles. A device eliminating these drawbacks is conceptualized, and its feasibility is studied using COMSOL® and …

The Impact Of Driving Conditions On Phev Battery Performance, Nathan Christensen, John Patten, Steven Srivastava, Gary P. Nola

Green Manufacturing Research Journal

The battery performance of a modified Prius with a 5 kWh plug-in battery was documented for a year to determine the impact of environmental conditions and user attributes on vehicle performance.  Both fuel economy and pure electrical efficiency were compared to ambient temperature.  The fuel economy has a positive relationship with ambient temperature until approximately 70˚F where the efficiency begins to drop.  Electrical performance has a positive linear relationship with ambient temperature.  With the emergence of electric vehicles (EVs) and PHEVs from a variety of automotive manufacturers, information on EV and PHEV performance for consumers will become more important.

The Bioactivity And Ion Release Of Titanium-Containing Glass Polyalkenoate Cements For Medical Applications, A. W. Wren, N. M. Cummins, F. R. Laffir, S. P. Hudson, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

The ion release profiles and bioactivity of a series of Ti containing glass polyalkenoate cements. Characterization revealed each material to be amorphous with a T_g in the region of 650-660°C. The network connectivity decreased (1.83-1.35) with the addition of TiO₂ which was also evident with analysis by X-ray photoelectron spectroscopy. Ion release from cements were determined using atomic absorption spectroscopy for zinc (Zn^₂₊), calcium (Ca^₂₊), strontium (Sr^₂₊), Silica (Si^₄₊) and titanium (Ti4+). Ions such as Zn^₂₊ (0.1-2.0 mg/l), Ca²⁺ (2.0-8.3 mg/l,) Sr²⁺ (0.1-3.9 mg/l), and S^{i4+ …}

Co2 Adsorption On Solid Sorbents, Bingyu Li

Electronic Theses and Dissertations

Sorbent-based CO2 capture technology is considered as one of the potential scientific techniques for mitigating greenhouse gas emission. Major advantages of sorbent based adsorption are its low regeneration energy coupled with the elimination of corrosion and equipment degradation characteristic of amine based solvent CO2 capture systems which are the preferred industrial methods. Different CO2 capture configurations, processes, and operational parameters for different sorbents were revieand summarized. Efficient industrial applications for CO2 capture require that solid sorbents possess an adsorption capacity between 1000-2000µmol/g or more together with a long-term regeneration capacity. Economical consideration necessitates that the cost of CO2 sequestration be …

Experimental Study Of The Interaction Between Surfactants And Preformed Particle Gels, Farag Awadh Muhammed

Masters Theses

"Gel and surfactant treatment are two principle methods to reduce water production and enhance oil recovery (EOR). However, either method by itself has limitations that can be avoided by combining the two. Gel treatment can improve sweep efficiency but has little effect on micro-displacement efficiency. Surfactants are mainly used to improve displacement efficiency but have little effect on sweep efficiency. This research sought to investigate whether the combination of gel and surfactant treatments can be used to significantly enhance oil recovery while reducing water production for extremely heterogeneous mature reservoirs. A newer trend in gel treatments is preformed particle gels …