Engineering Commons^™

Bioluminescent Magnetic Nanoparticles As Potential Imaging Agents For Mammalian Spermatozoa, Erick Salvador Vasquez, Jean M. Feugang, Scott T. Willard, Peter L. Ryan, Keisha B. Walters

Chemical and Materials Engineering Faculty Publications

Background: Nanoparticles have emerged as key materials for developing applications in nanomedicine, nanobiotechnology, bioimaging and theranostics. Existing bioimaging technologies include bioluminescent resonance energy transfer-conjugated quantum dots (BRET-QDs). Despite the current use of BRET-QDs for bioimaging, there are strong concerns about QD nanocomposites containing cadmium which exhibits potential cellular toxicity.

Results: In this study, bioluminescent composites comprised of magnetic nanoparticles and firefly luciferase (Photinus pyralis) are examined as potential light-emitting agents for imaging, detection, and tracking mammalian spermatozoa. Characterization was carried out using infrared spectroscopy, TEM and cryo-TEM imaging, and ζ-potential measurements to demonstrate the successful preparation of these nanocomposites. Binding …

Characterization Of Biochars Produced From Peanut Hulls And Pine Wood With Different Pyrolysis Conditions, James W. Lee, Bob Hawkins, Michelle K. Kidder, Barbara R. Evans, A. C. Buchanan, Danny Day

Chemistry & Biochemistry Faculty Publications

Background

Application of modern biomass pyrolysis methods for production of biofuels and biochar is potentially a significant approach to enable global carbon capture and sequestration. To realize this potential, it is essential to develop methods that produce biochar with the characteristics needed for effective soil amendment.

Methods

Biochar materials were produced from peanut hulls and pine wood with different pyrolysis conditions, then characterized by cation exchange (CEC) capacity assays, nitrogen adsorption–desorption isotherm measurements, micro/nanostructural imaging, infrared spectra and elemental analyses.

Results

Under a standard assay condition of pH 8.5, the CEC values of the peanut hull-derived biochar materials, ranging from …

Surface-Initiated Polymerizations For The Rapid Sorting Of Rare Cancer Cells, Jacob L. Lilly

Theses and Dissertations--Chemical and Materials Engineering

Cancer metastasis directly accounts for an estimated 90% of all cancer related deaths and is correlated with the presence of malignant cells in systemic circulation. This observed relationship has prompted efforts to develop a fluid biopsy, with the goal of detecting these rare cells in patient peripheral blood as surrogate markers for metastatic disease as a partial replacement or supplement to tissue biopsies. Numerous platforms have been designed, yet these have generally failed to support a reliable fluid biopsy due to poor performance parameters such as low throughput, low purity of enriched antigen positive cells, and insufficiently low detection thresholds …

Diffusion-Mediated Deposition Of Proteins, Ruiqian Zhan

Theses and Dissertations--Mechanical and Aerospace Engineering

Gradients of proteins play a prominent role in many biological processes, from development of multicellular organisms to chemical signaling in the immune system. Deposition of surface gradients is a way to permanently modifying a surface’s properties, resulting in the creation of novel materials which have widespread applications in biologically relevant fields, such as directed cell growth, production of biocompatible implantable materials, and creation of functional biosensors. These types of surfaces can also be used as an ex vivo tool to help understand many biological processes by mimicking the environment in gradient-related phenomena in a controllable way. However, despite the large …

An Overview Of Production And Development Of Ceramic Membranes, Shereen Kamel Amin, Heba Mohamed Abdallah, Mai H. Roushdy, Chakinaz Aly El-Sherbiny

Chemical Engineering

Ceramic membranes became one of the most important ceramic products because of their numerous benefits. Many attempts have been made by researchers to produce ceramic membranes with modified properties by varying their raw materials. Some of these attempts included incorporating wastes into their production process. Examples of such waste are fly ash wastes, glass waste, mud resulting from the hydro cyclone laundries, cortical bone animal, coal gangue, sawdust, construction waste and rice husk. An ideal waste would be priceless waste while at the same time assisting minimizing pollution. Such a situation deals with a dual economic and environmental aspect. This …

Reaction Parameters And Energy Optimisation For Biodiesel Production Using A Supercritical Process, Nessren Farrag, Mamdouh Gadalla, Mai Fouad

Chemical Engineering

No abstract provided.

Effect Of Ce And Co Addition To Fe/Al2o3 For Catalytic Methane Decomposition, Ahmed S. Al-Fatesh, Ashraf Amin, Ahmed A. Ibrahim, Wasim Ullah Khan, Moustafa A. Soliman, Raja L. Al-Otaibi, Anis H. Fakeeha

Chemical Engineering

Catalytic methane decomposition is studied in a fixed bed reactor. Two sets of bimetallic catalysts are employed, namely: 30%Fe-X%Ce/Al2O3 and 30%Fe-X%Co/Al2O3, and compared with monometallic 30%Fe/Al2O3 catalyst. The effect of promoting Fe with Ce and Co and reduction temperature are investigated. The results reveal that Ce addition has shown a negative impact on H2 yield while a positive effect on H2 yield and catalyst stability are observed with Co addition. In terms of number of moles of produced hydrogen per active sites, Fe/Al2O3 has shown a higher number of moles of hydrogen compared to bimetallic catalysts. The catalyst reduced at …

An Experimental Investigation Into The Effect Of Particulate Matter On Nox Reduction In A Scr Catalyst On A Dpf, Saksham Gupta

Dissertations, Master's Theses and Master's Reports

The study of NO_x reduction across the SCRF^® is presented in this report to understand the inlet and outlet NO, NO₂, NH₃ species from the SCRF^®. The SCRF^® is a prototype SCR catalyst on a Diesel Particulate Filter (DPF) that reduces NOx and PM at the downstream location. The SCRF^® reduces the packaging volume of the aftertreatment components in order to reduce the cost, volume and weight of the aftertreatment system. A total of 12 experiments were performed on a Cummins ISB 2013 280 hp engine and the aftertreatment system. The …

A Model Compound Study In Syngas Tar Reforming, Jaren Lee

LSU Master's Theses

Biomass or coal gasification are promising processes for renewable energy. However, a major operating problem in gasification is what to do with syngas byproducts such as H2S and tars (heavy hydrocarbons) that cause catalyst deactivation downstream. Studies have shown that rare earth oxides (REOs) doped with transition metals are promising catalysts for tar reforming in the presence of sulfur.(R. Li, Roy, Bridges, & Dooley, 2014) In Chapter 1, propane is studied as a model compound for tar reforming with transition metal-doped (e.g., Mn, Fe) REOs. These are compared to a typical commercial Ni/Al2O3 catalyst. The results showed that REO/TM catalysts …

A Numerical Investigation Of Wellbore Stability Problems Using An Elastoplastic Model, Chang Huang

LSU Master's Theses

Wellbore stability analysis acts an important role in the drilling design to avoid pipe-stuck, lost circulation and the other instability-induced problems. However, the conventional linear elastic model used by the industry is too conservative in predicting the mud weight window. This project is aimed at improving the accuracy of wellbore stability analysis. An elastoplastic model with Drucker-Prager yield criterion featured by strain hardening is proposed to characterize the rock behavior. Object-oriented finite element analysis simulator, NSMOOM, is programmed in MATLAB. The simulator is verified with the analytical solution in the elastic domain and with the commercial software ABAQUS in the …

Development Of Novel High-Throughput Methodologies To Evaluate The Thermal Stability Of High-Temperature Thin-Film Crystals For Energy Applications, Jonathan Kenneth Bunn

Theses and Dissertations

High temperature materials are used in a variety of energy applications such as jet turbines, high temperature sensors, and solid oxide fuel cells (SOFCs). Discovery of new materials and their optimization represents a difficult engineering challenge, as the materials have to be designed to have a high figure of merit during intense high temperature operations.

The large number of engineering considerations involved in the identification and optimization of such materials makes traditional one-by-one material investigations prohibitively time consuming. The time needed to explore large parameter domains can be significantly decreased through the use of high-throughput experimentation (HTE). HTE is an …

Investigation Of Heterogeneous Chemistry Of Pollutants In Flue Gas For Air And Oxy-Combustion, Benjamin D. Galloway

Theses and Dissertations

Due to increasing concerns associated with the emissions created from the combustion of coal, technologies are being modified or developed to limit many of these harmful emissions. The content of this thesis will focus on two technologies and the specific pollutants they seek to limit. The first investigated is selective catalytic reduction, which is utilized to decrease NO emissions. Due to the recent promulgation of the MATS regulations, focus has been on reducing the Hg emissions through the optimization of the SCR catalysts, making them bi-functional for NO reduction and Hg oxidation. The work presented here focuses on a novel …

Simulation Studies For Relative Importance Of Unconventional Reservoir Subgrid Scale Physics Parameters, Yaakoub Youssef El Khamra

LSU Doctoral Dissertations

In this endeavor we attempt to better understand gas transport in shale gas reservoirs, specifically the impact and effects of different physical phenomena. We start by documenting the nature of the reservoirs and the need for accurate modeling of various physical phenomena in multiple interconnected continua. The physical phenomena of interest include non-linear Forchheimer flow, Knudsen diffusion in the form of slip "Klinkenberg" flow and adsorption/desorption. The numerical methods used in the reservoir simulator are also introduced, along with a derivation of the main equations used. Various verification and validation results are compared against manufactured and analytical solutions and finally …

Cobalt-Based Catalysts For The Conversion Of Biomass-Derived Syngas To Ethanol And Higher Oxygenates, Zi Wang

LSU Doctoral Dissertations

Higher oxygenates synthesis by catalytic conversion of synthesis gas are the potential approaches to replace fossil fuels and produce chemicals for pharmaceutical manufacture, detergents and polymer industry. Cobalt-based catalysts are the most promising catalysts to replace noble metal catalysts for producing ethanol, acetaldehyde and higher oxygenates via CO hydrogenation. The formation of higher oxygenates requires active sites that can adsorb CO non-dissociatively and insert to the alkyl intermediate. The hydrogenation of the CO-inserted intermediates yields C2 and C2+ oxygenates. The main focus of this study is to investigate the active site for non-dissociative CO adsorption, and the modification of the …

A Practical Guide To Chemical Process Optimization: Analysis Of A Styrene Plant, Fleur Phelps

Honors Theses

This report acts as a beginner's guide to chemical processes optimization. Performed universally, optimization merely entails improving an existing process, situation, device or system. For a chemical engineer, optimization typically aims to maximize potential economics of a chemical process by manipulating decision variables while staying within known constraints. In order to maximize the overall economics of a chemical process, individual equipment or stream conditions are examined. The chemical process is implemented in simulation software The optimization of individual components of the process may aim to maximize or minimize an outcome specific to that component, but still ultimately maximizes economic potential. …

Design Of A Caustic Injection System In A Crude Distillation Unit, Andrew R. Cope

Honors Theses

Caustic Injection is a high-risk chemical process utilized in many refineries across the world to control overhead corrosion in the atmospheric distillation column of the Crude Distillation Unit. This thesis discusses the considerations that need to be accounted for in the design of a caustic injection system, as well as my own work at an internship where I was a member of a design team that worked to design a caustic injection system for a nearby refinery.

Exploration Of Compound Viability As An Organ-Selective Anti-Metastatic Therapeutic Treatment For Triple Negative Breast Cancer, Ashley E. Noblin

Honors Theses

Phenformin and metformin are compounds that are currently used to treat Type II Diabetes and have been shown to suppress breast cancer metastasis. These compounds were tested, after extensive research and screening of current approved oncology drugs, in various experiments with the cell lines MDA-MB-231, LM, and BoM, with MDA-MB-231 being the parental cell line, LM being the lung metastatic line, and BoM being the bone metastatic line. The cells were treated with compound addition at various concentrations and subject to a two-day concentration response viability study in order to determine any inhibitory effects, followed by a five-day assay in …

An Evaluation Of The Relationship Between Sigma-1 And Sigma-2 Receptors And The Endocannabinoid System, Jenn Miller

Honors Theses

Within the past two decades, sigma receptors have become a popular area for research. Although much has been learned about their structure, subtypes, and functions; there is still much to be learned. Consisting of two receptor subtypes (sigma-1 and sigma-2), it has been discovered that sigma receptor ligands potentiate the analgesic effects of both opiates and cannabinoids, though the exact mechanism and sigma subtype on which this occurs is still unknown. The purpose of this study is to determine if potentiation of opiates and cannabinoids occurs through sigma-1 or sigma-2 receptor signaling. Tetrad assays were performed for: 1. Morphine, an …

Optimization Of Fluidized Bed Isothermal Reactor In A Styrene Production Process, Matthew Hamilton Peaster

Honors Theses

The focus of this thesis is to explain the optimization of a fluidized bed isothermal reactor in a styrene production process. The first section of the thesis gives a summary of chemical process optimization in general. The next portion of the thesis gives an introduction to chemical process simulation software, and it explains how simulation software aids in the design and optimization of chemical processes. The third section of the thesis gives a brief overview of an optimization project of a styrene production process that was completed in the previous semester with a group of three. The final section explains …

The Creation Of Instructional Video Tutorials For Chemical Engineering Process Simulation Software, Nishal Bhikha

Honors Theses

Process simulation software is rapidly becoming a necessity in today's world. Often, learning how to use such a complex tool can be difficult and can take a significant period of time. This thesis outlines efforts to aid in the instruction of this type of software at the University of Mississippi.

Optimization Of Single And Multiple Unit Chemical Processes: A Case Study On The Optimization Of A Styrene Plant Design, Piero Bracamonte

Honors Theses

Optimizing a chemical plant revolves around achieving an efficiency that takes into account operating constraints and costs, along with production requirements and addressing environmental concerns. The first part of this thesis focuses on the team's optimization of a styrene production plant. The goal was to determine what changes from the base case minimize cost to produce the required amount of styrene while adhering to operating constraints. The team used PRO/II, a steady state process simulator, in order to simulate multiple unit operations included in the plant. The measure by which proposed design changes were compared was the calculated net present …

Modeling Churn And Annular Flow Regimes In Vertical And Near-Vertical Pipes With Small And Large Diameters, Erika Viana Pagan

LSU Master's Theses

This thesis presents an improved model for gas-liquid two-phase flow in churn and annular flow regimes for small- and large-diameter in vertical and near-vertical pipes. This new model assumes that a net liquid film moves upward along the pipe wall and gas phase moves upward, occupying the majority of the central part of the pipes, and forming a gas core, in both flow regimes. The model is validated using field and laboratory experimental data from several different studies from the literature, in terms of pressure along the wellbore or bottomhole pressure for field conditions (for high-pressure flows in long pipes, …

Development Of Microfluidic Devices To Study Algal Chemotaxis And Long-Term Growth Dynamics, Benjamin Seth Roberts

LSU Master's Theses

Harmful algal blooms pose a threat to human health and the environment. Many complex factors influence their formation and development, and much is still unknown. One major influencing factor that is well-known yet poorly studied is algal chemotaxis. Many studies have examined chemotaxis in other organisms, but very little about chemotaxis in algae has been studied, largely because existing technology and assay techniques are inadequate. Microfluidics offers many possibilities for cell biology, and has been applied to the study of chemotaxis in other organisms already. These techniques can be applied to the study of algal chemotaxis as well. We present …

Expandable Proppants For Hydraulic Fracturing, Livio Yang Santos

LSU Master's Theses

Hydraulic fracturing is recognized as the primary technique to achieve economic oil and gas production from low permeability reservoirs like shale and tight-sand formations. One of the main challenges facing the oil and gas industry is maintaining the proppant functionality in the subsurface where replacement of proppant is only possible by expensive refracturing operations. Proppant crushing and proppant embedment have posed challenges for sustainable production from stimulated wells especially in soft and deep formations like Haynesville Shales. Experimental measurements show the strong impact of proppant stress and proppant embedment on reducing fracture conductivity. In this work, we introduce a new …

Extensive Sensitivity Analysis And Parallel Stochastic Global Optimization Using Radial Basis Functions Of Integrated Biorefineries Under Operational Level Uncertainties, Santiago David Salas Ortiz

LSU Master's Theses

This work presents a decision-making framework for global optimization of detailed renewable energy processes considering technological uncertainty. The critical uncertain sources are identified with an efficient computational method for global sensitivity analysis, and are obtained in two different ways, simultaneously and independently per product pathway respect to the objective function. For global optimization, the parallel stochastic response surface method developed by Regis & Shoemaker (2009) is employed. This algorithm is based on the multi-start local metric stochastic response surface method explored by the same authors (2007a). The aforementioned algorithm uses as response surface model a radial basis function (RBF) for …

The Supercritical Pyrolysis Of 1-Octene, Elizabeth Anne Hurst

LSU Master's Theses

In the pre-combustion environment, fuels for future high-speed aircrafts are predicted to take on increasing heat loads in their role as the primary coolant in order to remove excess heat from engine subsystems. While acting in this role, these fuels are expected to experience temperatures and pressures up to 700 °C and 130 atm, conditions which are supercritical for jet fuels and most hydrocarbons. Such extreme conditions can cause fuel decomposition and subsequent pyrolytic reactions, which can lead to the formation of polycyclic aromatic hydrocarbons (PAH). PAH are precursors to solids deposits that clog fuel-delivery lines, causing reduced engine performance …

The Effect Of Drying On The Release Of Small Hydrophilic Molecular Drugs From Polyelectrolyte Complex Beads, Dounsavanh Letdara

Williams Honors College, Honors Research Projects

The effects of bead composition and dryness on the release rate of small molecules, like a drug or dye, from polyelectrolyte complex (PEC) beads were studied. Release studies were performed on dried and not dried beads prepared using different PEC to drug ratios. The beads were dried for two hours, which allowed them to reach a constant weight. The beads were loaded with a dye, so their release could be detected through the visible light regime. A plate reader was used to determine the absorbance of a sample, and then the amount of dye released was determined. The data presented …

Microbiologically Influenced Corrosion: Rhamnolipid Effects, Andrea M. Wildroudt

Williams Honors College, Honors Research Projects

The purpose of this experiment was to identify if a rhamnolipid could inhibit the growth of a biofilm on carbon steel coupons and result in less corrosion activity. This type of research impacts various industries (with one of the largest being the oil and gas industry). Multiple systems with varying concentrations of the rhamnolipid were created to determine, if any, the optimum concentration to inhibit biofilm growth. The systems were created and exposed to optimum physio-chemical environments to promote SRB induced corrosion. Coupons were immersed for 28 days. Seven systems were created with varying rhamnolipid concentrations; to ensure accurate results, …

Calcium Alginate Microbead Production Via An Air Assisted Shearing Process, Ryan Loftus

Williams Honors College, Honors Research Projects

The purpose of this project was to model the size of calcium alginate microbeads produced by extruding a solution of 1.5 wt.% alginate from a syringe and needle with air shear generated from a pneumatic line flowing in an annular tube around the extrusion needle. The air shear would create microdroplets that would fall into a solution of 2 wt.% calcium chloride in water, crosslinking the droplets into beads. These microbeads can be used in drug dispersion applications or in encapsulation of cells throughout the body due to their biocompatibility. The goal was to create uniform beads that ranged from …

Protein Sequence-Structure-Function Relationship: Testing Ke-50 Modification On Recombinant Green Fluorescent Protein (Acgfp), Anna E. Burkey

Williams Honors College, Honors Research Projects

Protein modification shows promise for improving the effectiveness of protein therapy, including the use of Interferon-beta-1b for the treatment of multiple sclerosis. The addition of a chain of 50 lysine and glutamic acid residues (also called a KE50 modification) was tested on green fluorescent protein (AcGFP) to determine its effect on the bioactivity of the protein. Standard transformation protocol was used to grow the normal and modified proteins in E.Coli, and the bioactivity of the protein was measured using quantum yield and extinction coefficients to determine the reduction in brightness from the native form to the modified form. The …