Engineering Commons^™

Mechanistic Investigation Toward A Microkinetic Model For Decarboxylation Of Gamma Valerolactone Over Silica Alumina, Christian Suhngwa Jungong

Theses - ALL

γ-valerolactone (GVL) ring opening- and decarboxylation rates were measured over amorphous silica alumina (SiO2/Al2O3) catalyst in the gas phase, using a down configuration fixed bed reactor, operating under anhydrous and differential conditions. By varying temperature, space time and GVL partial pressure, measured rates were leveraged to determine kinetic parameters (apparent activation barriers and pre-exponential factors) for the ring opening and decarboxylation step, as well as thermodynamic parameters (enthalpy- and entropy of reaction) for the ring opening step. The experimentally measured parameters were applied for the development of a microkinetic model that quantitatively describes the overall kinetics involved in the decarboxylation …

Mechanistic Investigation Toward A Microkinetic Model For Decarboxylation Of Gamma Valerolactone Over Silica Alumina, Christian Suhngwa Jungong

Theses - ALL

γ-valerolactone (GVL) ring opening- and decarboxylation rates were measured over amorphous silica alumina (SiO2/Al2O3) catalyst in the gas phase, using a down configuration fixed bed reactor, operating under anhydrous and differential conditions. By varying temperature, space time and GVL partial pressure, measured rates were leveraged to determine kinetic parameters (apparent activation barriers and pre-exponential factors) for the ring opening and decarboxylation step, as well as thermodynamic parameters (enthalpy- and entropy of reaction) for the ring opening step. The experimentally measured parameters were applied for the development of a microkinetic model that quantitatively describes the overall kinetics involved in the decarboxylation …

Biomarker Detection At Risk Forecasting Level Using Metal-Enhanced Fluorescence Combined With Surface Acoustic Wave, Jun Liu

USF Tampa Graduate Theses and Dissertations

In this paper, metal-enhanced fluorescence (MEF) technique is used to lower the detection limit of carcinoembryonic antigen (CEA) which is able to be utilized in forecasting the risk of having certain kinds of cancers, especially colon and rectal cancer. By incubating silver nanocubes (Ag NCs) on the surface of the chips, the detection limit goes down to below 1ng/mL of CEA. Also, when combining MEF with surface acoustic wave (SAW) devices, the incubation time between antigen and antibody will decrease significantly with the fluorescence signal keeping similar or higher level.

Evaluation Of Stochastic Particle Dispersion Modeling In Turbulent Round Jets, Guangyuan Sun, John C. Hewson, David O. Lignell

Faculty Publications

ODT (one-dimensional turbulence) simulations of particle-carrier gas interactions are performed in the jet flow configuration. Particles with different diameters are injected onto the centerline of a turbulent air jet. The particles are passive and do not impact the fluid phase. Their radial dispersion and axial velocities are obtained as functions of axial position. The time and length scales of the jet are varied through control of the jet exit velocity and nozzle diameter. Dispersion data at long times of flight for the nozzle diameter (7 mm), particle diameters (60 and 90 µm), and Reynolds numbers (10, 000–30, 000) are …

Preparation Of Nano-Size Ceramic Membrane From Industrial Waste, Shereen K. Amin, Mai H. Roushdy, Chakinaz Aly El-Sherbiny, Heba Mohamed Abdallah, Magdi F. Abadir

Chemical Engineering

Industrial ceramic wastes are becoming an increasing problem worldwide. Recently, this problem has attracted social concern due to the growing amounts of waste despite the measures and precautions that have been taken worldwide aiming at managing such wastes. One promising solution that has been recently researched consists incorporating such wastes in ceramic bodies which besides minimizing the waste load often improve the quality of the ceramic body. Roller kilns used in the production of ceramic tiles are routinely ground to remove traces of contamination. The fine ground powder is usually discarded as a useless waste. In the present paper, the …

Experimental Investigation Of Co2 Transport Through Combined Membrane Absorber And Regenerator, Nima Mohammadrasool Atbaei

Chemical and Petroleum Engineering Theses

Greenhouse gases such as carbon dioxide have been known to contribute significantly to global warming, which in turn has resulted in serious global environmental problems. Carbon dioxide is the main gaseous contaminant in the atmosphere, representing about 80% of greenhouse gases. It is reported that industry and power plants using fossil fuels such as coal-combustion power generators produce half of the CO₂ emissions. These emissions create the need for low energy-consumption, and efficient technologies for the capture and removal of CO₂ from gas mixtures produced by industrial sources.

Conventional gas absorption processes for the removal of CO_{2 …}

Continuous Synthesis And Condition Exploration Of Precursor Ni1/3Co1/3Mn1/3(Oh)2 Ternary Cathode Material, Zhi-Jun Jiang, Ya-Li Zhang, Qian Wang, Hui Zhang

Journal of Electrochemistry

Commercial LiNi_1/3Co_1/3Mn_1/3(OH)₂ ternary material is generally prepared by a combination of co-precipitation and solid state reaction method. The particle size distribution and morphology of Ni_1/3Co_1/3Mn_1/3(OH)₂ precursor have a great impact on the electrochemical performance of LiNi_1/3Co_1/3Mn_1/3O₂. In this work, the precursor Ni_1/3Co_1/3Mn_1/3(OH)₂ ternary cathode material was prepared by co-precipitation method with MnSO₄, NiSO₄, and CoSO₄ as raw materials, NaOH as a precipitating agent and NH_{3 …}

Template-Assisted Hydrothermal Synthesis Of Nio@Co3O4 Hollow Spheres With Hierarchical Porous Surfaces For Supercapacitor Applications, Wen Zhou, Xue-Feng Lu, Ming-Mei Wu, Gao-Ren Li

Journal of Electrochemistry

Hollow structures have shown great potentials in a variety of important applications, such as energy conversion and storage. In order to further enhance the performance, the rational design of hollow structures with higher complexity in terms of composition and structure is highly desirable and still remains a great challenge. In this work, an efficient strategy was established for the fabrication of novel NiO@Co₃O₄ hollow spheres (HSs) with hierarchical porous surfaces by silica spheres template-assisted hydrothermal synthesis. The as-fabricated NiO@Co₃O₄ HSs showed high specific surface area of 219.68 m²·g^-1, and significant …

The Study Of Dynamical Electrochemical Impedance Spectroscopy For Oxygen Reduction Reaction On Pt/C Catalyst, Kun-Ming Shi, Jian-Wei Guo, Jia Wang

Journal of Electrochemistry

With joint techniques of rotating disc electrode(RDE) and electrochemical impedance spectroscopy(EIS), and further establishment on equivalent circuit model, this paper studied oxygen reduction reaction(ORR) on commercial Pt/C catalyst in acid medium. Our results found that the dynamical interface on Pt/C consists of two independent processes: 1) the PtO reduction from Pt surface, 2) the new PtO formation from ORR, thus providing key clues for catalyst stability and activity. This also implied that the dynamical interface facilitates reconstruction for porous electrode, and matches with mass transfer. One important issue is discovered that at high overpotential, the high reaction rate for ORR …

Response Of A Doublet To A Nearby Dc Electrode Of Uniform Potential, Christopher L. Wirth, Sri Harsha Nuthalapati

Chemical & Biomedical Engineering Faculty Publications

The electric-field-assisted directed assembly of spherical colloidal particles near an electrode has been studied for nearly three decades. Recently, focus has shifted to the electric-field-assisted assembly and propulsion of nonspherical (i.e., anisotropic) particles. This paper describes calculations and results for a doublet of asymmetric ζ potential and size responding to a dc electric field. The doublet experienced a net vertical force that depended on both the asymmetry in ζ potential and lobe size. In addition, the doublet experienced a net lateral force perpendicular to the applied electric field. The lateral force depended on the difference in ζ potential of the …

Polymer-Coated Therapeutic Nanoparticles, Sutapa Barua

Chemical and Biochemical Engineering Faculty Research & Creative Works

Polymer-coated therapeutic nanoparticles, methods of making and using the same are provided. The polymer-coated therapeutic nanoparticles can include an inner core having at least one therapeutic agent and an outer polymeric coating covering at least a portion of the inner core. A targeting molecule can be associated with the outer polymeric coating.

Numerical Simulation On The Combustion Characteristic Of Iron Ore Sintering With Flue Gas Recirculation, Gan Wang, Zhi Wen, Guofeng Lou, Ruifeng Dou, Xunliang Liu, Fuyong Su, Sizong Zhang

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Molecular Dynamics Studies Of The Adsorption Behavior Of Methyl 3-((2-Mercaptophenyl)Imino)Butanoate As Corrosion Inhibitors On Copper Surface, Jianlin Sun, Sang Xiong, Xudong Yan, Yang Xu

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Study Of Poisoning Mechanism Of Hg And As On V2o5–Wo3/Tio2 Scr De-Nox Catalysts, Qingcai Liu, Ming Kong, Lu Yao, Shan Ren, Jian Yang

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Numerical Simulation Of Residual Stress In Low-Temperature Colossal Carburized Layer On Austenitic Stainless Steel, Dongsong Rong, Yong Jiang, Jianming Gong, Yawei Peng

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

3d Fe Modelling Of Die Stress And Wear In Non-Isothermal Forging Of Ti–6al–4v Turbine Blade, Shiyuan Luo, Dahu Zhu, Lin Hua, Dongsheng Qian, Sijie Yan

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Investigation Of The Effects Of Uranium(Iii)-Chloride Concentration On Voltammetry In Molten Licl-Kcl Eutectic With A Glass Sealed Tungsten Electrode, Devin Rappleye, Kevin Teaford, Michael F. Simpson

Faculty Publications

One of the major sources of error for electroanalytical measurements in high-temperature molten salts is from the measurement of the working electrode (WE) area. A glass sealed working electrode (GSWE) was developed in order to set the exposed area of tungsten and reduce the error associated with WE area. The insulating property of the glass while in contact with molten salt was verified by observing the independence of electrochemical signals with adjustments in the WE position. The integrity of the glass coating was also confirmed by observing the stability of electrochemical signals (±1.9%) over several hours. Cyclic voltammetry (CV) and …

Recent Approaches In Designing Bioadhesive Materials Inspired By Mussel Adhesive Protein, Pegah Kord Forooshani, Bruce P. Lee

Department of Biomedical Engineering Publications

Marine mussels secret protein-based adhesives, which enable them to anchor to various surfaces in a saline, intertidal zone. Mussel foot proteins (Mfps) contain a large abundance of a unique, catecholic amino acid, Dopa, in their protein sequences. Catechol offers robust and durable adhe-sion to various substrate surfaces and contributes to the curing of the adhesive plaques. In this article, we review the unique features and the key functionalities of Mfps, catechol chemistry, and strategies for preparing catechol-functionalized poly- mers. Specifically, we reviewed recent findings on the contributions of various features of Mfps on interfacial binding, which include coacervate formation, surface …

Subcellular And In-Vivo Nano-Endoscopy, Surya Venkatasekhar Cheemalapati, John Winskas, Hao Wang, Karthik Konnaiyan, Arseny Zhdanov, Alison Roth, Swamy Rakesh Adapa, Andrew Deonarine, Rays H. Y. Jiang, Anna Pyayt

Chemical, Biological and Materials Engineering Faculty Publications

Analysis of individual cells at the subcellular level is important for understanding diseases and accelerating drug discovery. Nanoscale endoscopes allow minimally invasive probing of individual cell interiors. Several such instruments have been presented previously, but they are either too complex to fabricate or require sophisticated external detectors because of low signal collection efficiency. Here we present a nanoendoscope that can locally excite fluorescence in labelled cell organelles and collect the emitted signal for spectral analysis. Finite Difference Time Domain (FDTD) simulations have shown that with an optimized nanoendoscope taper profile, the light emission and collection was localized within ~100 nm. …

Effect Of Surface Treatment On Liquid Adhesion Inside 3-D Structures, Madani A. Khan, Jeffrey Alston, Andrew Guenthner, Jacob Zavala

STAR Program Research Presentations

This study explores the relationship between chemical surface treatments on the interior of glass tubes and their resistance to fluid flow. By treating the interior of the tubes with functional silanes we can decrease or increase the interaction of the tube walls with the fluid column, which translates to changes in fluid column height for a given pressure differential. Resistance to fluid flow is quantified by using the tubes as integral parts of a barometric pressure column and measuring the changes in column height as the fluid is pulled into the tube by a set pressure differential. The barometric pressure …

An Unexpected Restructuring Of Combustion Soot Aggregates By Subnanometer Coatings Of Polycyclic Aromatic Hydrocarbons, Chao Chen, Xiaolong Fan, Tasneem Shaltout, Chong Qiu, Yan Ma, Andrew Goldman, Alexei F. Khalizov

Chemistry and Chemical Engineering Faculty Publications

We investigated the effect of thin polycyclic aromatic hydrocarbon (PAH) coatings on the structure of soot aggregates. Soot aerosol from an inverted diffusion burner was size classified, thermally denuded, coated with six different PAHs, and then characterized using scanning electron microscopy, light scattering, and mass-mobility measurements. Contrary to our expectation, significant restructuring was observed in the presence of subnanometer layers of pyrene, fluoranthene, and phenanthrene. These PAHs remained in subcooled liquid state in thin films, whereby the liquid layer acted as a lubricant, reducing the force required to initiate the restructuring. Thin layers of PAH of higher melting temperatures (perylene, …

Modelling Of Coal-Biomass Blends Gasification And Power Plant Revamp Alternatives In Egypt’S Natural Gas Sector, Dalia A. Ali Eng, Mamdouh A. Gadalla Prof., Omar Y. Abdelaziz, Fatma H. Ashour Prof.

Chemical Engineering

Recently, there has been a growing research interest in the co-gasification of biomass with coal to produce syngas and electricity in a sustainable manner. Co-gasification technology do not only decrease potentially the exploitation of a significant amount of conventional coal resources, and thus lower greenhouse gases (GHG) emissions, but also boost the overall gasification process efficiency. In the present work, a rigorous simulation model of an entrained flow gasifier is developed using the Aspen Plus® software environment. The proposed simulation model is tested for an American coal and the model validation is performed in good agreement with practical data. The …

Modeling Pyrolysis Of Large Coal Particles With Many Species, Jianqing Li

Master's Theses (2009 -)

Coal currently supplies 40% of the world’s electricity needs, and is one of the most important energy sources. As the initial stage of coal combustion, pyrolysis is a thermal decomposition process which converts coal into light gases and tars, which are subsequently consumed in combustion reactions, as well as solid char. Recently there has been interest in using slow pyrolysis as a stand-alone process for the production of chemicals and fuels from large (mm-scale) coal particles. Simulations can be used to efficiently study the impact of pyrolysis conditions on gas, tar and char yields, as well as gas and tar …

Development And Optimization Of Voltammetry For Real Time Analysis Of Multi-Component Electrorefiner Salt, Chao Zhang, Devin Rappleye, Michael F. Simpson

Faculty Publications

Normal pulse voltammetry was performed on LiCl-KCl-UCl3- MgCl2 molten salt mixtures while varying parameters such as pulse time, relaxation potential, and interval time. Concentrations of UCl3 up to 7 wt% were tested with a fixed 1.5 wt% MgCl2 concentration. The correlation between diffusion limited partial current density to UCl3 concentration exhibited an excellent fit to a 2nd order polynomial. A similar fit was obtained for the correlation between MgCl2 concentration and the diffusion limited partial current density at a fixed UCl3 concentration of 1.0 wt%.

Plasticized Polymer Coatings For Sh-Saw Sensors For High Sensitivity And Long-Term Monitoring Of Btex Analytes In Liquid Phase, Pintu Adhikari

Master's Theses (2009 -)

BTEX compounds (benzene, toluene, ethylbenzene, and xylene) are constituents of crude oil and hazardous to human health. Among them, benzene has the lowest maximum contaminant level for drinking water because of its carcinogenicity. Spills or leakage from underground storage tanks or hazardous waste sites can contaminate nearby groundwater with these volatile organic compounds. Therefore, it is very important to detect the presence of BTEX contamination as early as possible in order to start the remediation process and maintain a healthy environment. To develop an in-situ continuous monitoring sensor system, shear horizontal surface acoustic wave (SH-SAW) sensor devices are being investigated …

Organic Resin Laminate, Methods Of Making And Ssing The Same, And Articles Comprising The Same, Mary Gilliam, Koichi Higuchi

Chemical Engineering Patents

An organic resin laminate comprising an organic resin substrate and a multilayer coating system thereon has weather resistance and mar resistance. The multilayer coating system includes an outermost layer (I) which is a hard film resulting from plasma polymerization of an organosilicon compound and an intermediate layer (II) which is a cured film of a composite coating composition (2) comprising inorganic oxide nanoparticle and vinyl copolymer.

Grain Boundary Induced Bias Instability In Soluble Acene-Based Thin-Film Transistors, Ky V. Nguyen, Marcia M. Payne, John E. Anthony, Jung Hun Lee, Eunjoo Song, Boseok Kang, Kilwon Cho, Wi Hyoung Lee

Chemistry Faculty Publications

Since the grain boundaries (GBs) within the semiconductor layer of organic field-effect transistors (OFETs) have a strong influence on device performance, a substantial number of studies have been devoted to controlling the crystallization characteristics of organic semiconductors. We studied the intrinsic effects of GBs within 5,11-bis(triethylsilylethynyl) anthradithiophene (TES-ADT) thin films on the electrical properties of OFETs. The GB density was easily changed by controlling nulceation event in TES-ADT thin films. When the mixing time was increased, the number of aggregates in as-spun TES-ADT thin films were increased and subsequent exposure of the films to 1,2-dichloroethane vapor led to a significant …

Goggatomy: A Method For Opening Small Cuticular Compartments In Arthropods For Physiological Experiments, Alan R. Kay, Davide Raccuglia, Jon Scholte, Elene Sivan-Loukianova, Chirstopher A. Barwacz, Steven R. Armstrong, C. Allan Guymon, Michael N. Nitabach, Daniel F. Eberl

Faculty Publications

Most sense organs of arthropods are ensconced in small exoskeletal compartments that hinder direct access to plasma membranes. We have developed a method for exposing live sensory and supporting cells in such structures. The technique uses a viscous light cured resin to embed and support the structure, which is then sliced with a sharp blade. We term the procedure a “goggatomy,” from the Khoisan word for a bug, gogga. To demonstrate the utility of the method we show that it can be used to expose the auditory chordotonal organs in the second antennal segment and the olfactory receptor neurons …

Capture And Recycle Of Industrial Co2 Emissions Using Mircoalgae, Michael H. Wilson, Daniel T. Mohler, John G. Groppo, Thomas E. Grubbs, Stephanie Kesner, E. Molly Frazar, Aubrey Shea, Czarena L. Crofcheck, Mark Crocker

Center for Applied Energy Research Faculty and Staff Publications

A novel cyclic flow photobioreactor (PBR) for the capture and recycle of CO₂ using microalgae was designed and deployed at a coal-fired power plant (Duke Energy’s East Bend Station). The PBR was operated continuously during the period May–September 2015, during which algae productivity of typically 0.1–0.2 g/(L day) was obtained. Maximum CO₂ capture efficiency was achieved during peak sunlight hours, the largest recorded CO₂ emission reduction corresponding to a value of 81 % (using a sparge time of 5 s/min). On average, CO₂ capture efficiency during daylight hours was 44 %. The PBR at East Bend …

Preparation And Microstructure Of Machinable Al2O3/Mica Composite By Ball Milling And Hot-Press Sintering, Qingbo Tian, Deyu Kong, Tongguang Zhai

Chemical and Materials Engineering Faculty Publications

A machinable α-Al₂O₃/mica composite was prepared by hot-press sintering. In this experiment, a mica-contained glass ceramic in the MgO-Al₂O₃-SiO₂-F glassy system was employed and the base glass powders were obtained by traditional melting-quenched method. Then, α-Al₂O₃ milling swarf was introduced by medium α-alumina milling ball to the glass powders. The test results indicate that the composites consist of mica crystal and mullite crystal, which are precipitated in the base glass. The α-Al₂O₃ shows an irregular polygon, which is inlayed in the base material. With …