Engineering Commons^™

Cutter Elements For Drill Bits And Methods For Fabricating Same, Guodong Zhan, Biju P. Kumar, Russell C. Gilleylen, Michael D. Hughes, Xinhua Liang

Chemical and Biochemical Engineering Faculty Research & Creative Works

A method of fabricating a PCD cutter element including a diamond table including a plurality of coated diamond particles fabricated using an atomic layer deposition (ALD) process.

Effect Of Pt Promotion On The Ni-Catalyzed Deoxygenation Of Tristearin To Fuel-Like Hydrocarbons, Ryan Loe, Kelsey Huff, Morgan Walli, Tonya Morgan, Dali Qian, Robert Pace, Yang Song, Mark Isaacs, Eduardo Santillan-Jimenez, Mark Crocker

Center for Applied Energy Research Faculty and Staff Publications

Pt represents an effective promoter of supported Ni catalysts in the transformation of tristearin to green diesel via decarbonylation/decarboxylation (deCO_x), conversion increasing from 2% over 20% Ni/Al₂O₃ to 100% over 20% Ni-0.5% Pt/Al₂O₃ at 260 °C. Catalyst characterization reveals that the superior activity of Ni-Pt relative to Ni-only catalysts is not a result of Ni particle size effects or surface area differences, but rather stems from several other phenomena, including the improved reducibility of NiO when Pt is present. Indeed, the addition of a small amount of Pt to the supported Ni …

Near-Surface Material Phases And Microstructure Of Scandate Cathodes, Xiaotao Liu, Bernard K. Vancil, Matthew J. Beck, Thomas John Balk

Chemical and Materials Engineering Faculty Publications

Scandate cathodes that were fabricated using the liquid-solid process and that exhibited excellent emission performance were characterized using complementary state-of-the-art electron microscopy techniques. Sub-micron BaAl₂O₄ particles were observed on the surfaces and edges of tungsten particles, as seen in cross-section samples extracted from the scandate cathode surface regions. Although several BaAl₂O₄ particles were observed to surround smaller Sc₂O₃ nanoparticles, no chemical mixing of the two oxides was detected, and in fact the distinct oxide phases were separately verified by chemical analysis and also by 3D elemental tomography. Nanobeam electron diffraction confirmed …

Characterization And Quantification Of Highly Sulfated Glycosaminoglycan Isomers By Gated-Trapped Ion Mobility Spectrometry Negative Electron Transfer Dissociation Ms/Ms, Juan Wei, Jiandong Wu, Yang Tang, Mark E. Ridgeway, Melvin A. Park, Catherine E. Costello, Joseph Zaia, Cheng Lin

Chemical and Biochemical Engineering Faculty Research & Creative Works

Glycosaminoglycans (GAGs) Play Vital Roles in Many Biological Processes and Are Naturally Present as Complex Mixtures of Polysaccharides with Tremendous Structural Heterogeneity, Including Many Structural Isomers. Mass Spectrometric Analysis of GAG Isomers, in Particular Highly Sulfated Heparin (Hep) and Heparan Sulfate (HS), is Challenging Because of their Structural Similarity and Facile Sulfo Losses during Analysis. Herein, We Show that Highly Sulfated Hep/HS Isomers May Be Resolved by Gated-Trapped Ion Mobility Spectrometry (Gated-TIMS) with Negligible Sulfo Losses. Subsequent Negative Electron Transfer Dissociation (NETD) Tandem Mass Spectrometry (MS/MS) Analysis of TIMS-Separated Hep/HS Isomers Generated Extensive Glycosidic and Cross-Ring Fragments for Confident Isomer …

The Effect Of Calcination Rate On The Structure Of Mesoporous Bioactive Glasses, Saidur Rahman, Andrew Mendonca, Adel Alhalawani, Deanna Polintan, Owen M. Clarkin, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Mesoporous bioactive glasses (MBGs) are designed to have high specific surface area. They are formulated by a sol–gel process to formulate the glass followed by calcination. This study evaluates how calcination heating rate influences the porous architecture, and thereby the specific surface area, of MBGs. MBGs of molar ratio 80:15:5 for SiO₂ :CaO:P₂ O 5 were calcined using both low (1 °C/min) and high (20 °C/min) heating rates, termed as L-MBG and H-MBG, respectively. The results obtained from small-angle X-ray diffraction (SAXRD) confirm that the MBGs possess 2D hexagonal (P6mm) spacing groups and wide-angle XRD confirms the amorphicity …

Carboxylic Acids Accelerate Acidic Environment-Mediated Nanoceria Dissolution, Robert A. Yokel, Matthew L. Hancock, Eric A. Grulke, Jason M. Unrine, Alan K. Dozier, Uschi M. Graham

Pharmaceutical Sciences Faculty Publications

Ligands that accelerate nanoceria dissolution may greatly affect its fate and effects. This project assessed the carboxylic acid contribution to nanoceria dissolution in aqueous, acidic environments. Nanoceria has commercial and potential therapeutic and energy storage applications. It biotransforms in vivo. Citric acid stabilizes nanoceria during synthesis and in aqueous dispersions. In this study, citrate-stabilized nanoceria dispersions (∼4 nm average primary particle size) were loaded into dialysis cassettes whose membranes passed cerium salts but not nanoceria particles. The cassettes were immersed in iso-osmotic baths containing carboxylic acids at pH 4.5 and 37 °C, or other select agents. Cerium atom material …

On Accounting For Equipment-Control Interactions In Economic Model Predictive Control Via Process State Constraints, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Traditionally, chemical processes have been operated at steady-state; however, recent work on economic model predictive control (EMPC) has indicated that some processes may be operated in a more economically-optimal fashion under a time-varying operating policy. It is unclear how time-varying operating policies may impact process equipment, which must be investigated for safety and profit reasons. It has traditionally been considered that constraints on process states can be added to EMPC design to prevent the controller from computing control actions which create problematic operating conditions for process equipment. However, no rigorous investigation has yet been performed to analyze whether, when a …

Increasing Salt Rejection Of Polybenzimidazole Nanofiltration Membranes Via The Addition Of Immobilized And Aligned Aquaporins, Priyesh Ashokrao Wagh, Xinyi Zhang, Ryan Blood, Peter M. Kekenes-Huskey, Prasangi Rajapaksha, Yinan Wei, Isabel C. Escobar

Chemical and Materials Engineering Faculty Publications

Aquaporins are water channel proteins in cell membrane, highly specific for water molecules while restricting the passage of contaminants and small molecules, such as urea and boric acid. Cysteine functional groups were installed on aquaporin Z for covalent attachment to the polymer membrane matrix so that the proteins could be immobilized to the membranes and aligned in the direction of the flow. Depth profiling using x-ray photoelectron spectrometer (XPS) analysis showed the presence of functional groups corresponding to aquaporin Z modified with cysteine (Aqp-SH). Aqp-SH modified membranes showed a higher salt rejection as compared to unmodified membranes. For 2 M …

Model Predictive Automatic Control Of Sucker Rod Pump System With Simulation Case Study, Brigham Hansen, Brandon Tolbert, Cory Vernon, John Hedengren

Faculty Publications

This work enables accelerated fluid recovery in oil and gas reservoirs by automatically controlling fluid height and bottomhole pressure in wells. Several literature studies show significant increase in recovered oil by determining a target bottomhole pressure but rarely consider how to control to that value. This work enables those benefits by maintaining bottomhole pressure or fluid height. Moving Horizon Estimation (MHE) determines uncertain well parameters using only common surface measurements. A Model Predictive Controller (MPC) adjusts the stroking speed of a sucker rod pump to maintain fluid height. Pump boundary conditions are simulated with Mathematical Programs with Complementarity Constraints (MPCCs) …

Fluorescence Of Cdse/Zns Quantum Dots In Toluene: Effect Of Cyclic Temperature, Ting Chen, Weiling Luan, Shaofu Zhang, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Quantum dots (QDs) are the potential material for the application in optical thermometry, and have been successfully applied to solar cells, LEDs, bio-labeling, structural health monitoring, etc. In this paper, we study the fluorescence properties of CdSe/ZnS QDs in toluene under the action of heating-cooling cycles. The experimental results show that, in a heating-cooling cycle, increasing temperature causes red-shift of the emission peak and the decrease of the PL intensity, and decreasing temperature causes blue-shift of the emission peak and the increase of the PL intensity. The surface structures of the QDs likely are dependent on the cycle numbers, which …

Preformed Partial Gel Injection Chased By Low-Salinity Waterflooding In Fractured Carbonate Cores, Ali K. Alhuraishawy, Baojun Bai, Mingzhen Wei, Abdullah Almansour

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Fractures and oil-wet conditions significantly limit oil recovery in carbonate reservoirs. Gel treatment has been applied in injector wells to modify the prevailing reservoir streamlines and significantly reduce fracture permeability, whereas low-salinity waterflooding has been applied experimentally to modify rock wettability toward water-wet for improved oil recovery. However, both processes have limitations that cannot be resolved using a single method. The objective of this study was to test whether low-salinity water could enable gel particles to move deeply into fractures to efficiently increase oil recovery and control water production. A semitransparent fracture model of carbonate cores and acrylic plates was …

Raman Spectroscopy As A Predictive Tool For Monitoring Osteoporosis Therapy In A Rat Model Of Postmenopausal Osteoporosis, J. Renwick Beattie, Antonia Sophocleous, M. Clare Caraher, Olive O'Driscoll, Niamh M. Cummins, Steven E.J. Bell, Mark R. Towler, Alireza Rahimnejad Yazdi, Stuart H. Ralston, Aymen I. Idris

Chemical and Biochemical Engineering Faculty Research & Creative Works

Pharmacological therapy of osteoporosis reduces bone loss and risk of fracture in patients. Modulation of bone mineral density cannot explain all effects. Other aspects of bone quality affecting fragility and ways to monitor them need to be better understood. Keratinous tissue acts as surrogate marker for bone protein deterioration caused by oestrogen deficiency in rats. Ovariectomised rats were treated with alendronate (ALN), parathyroid hormone (PTH) or estrogen (E2). MicroCT assessed macro structural changes. Raman spectroscopy assessed biochemical changes. Micro CT confirmed that all treatments prevented ovariectomy-induced macro structural bone loss in rats. PTH induced macro structural changes unrelated to ovariectomy. …

Exploring The Effects Of Electrospun Fiber Surface Nanotopography On Neurite Outgrowth And Branching In Neuron Cultures, Anthony R. D'Amato, Devan L. Puhl, Alexis M. Ziemba, Christopher D.L. Johnson, Janneke Doedee, Jonathan Bao, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Three aligned, electro spun fiber scaffolds with unique surface features were created from poly-L-lactic acid (PLLA). Fibers without surface nano topography (smooth fibers), fibers with surface divots (shallow pits), and fibers with surface pits (deeper pits) were fabricated, and fiber alignment, diameter, and density were characterized using scanning electron microscopy (SEM). Whole dorsal root ganglia (DRG) were isolated from rats and placed onto uncoated fibers or fibers coated with laminin. On uncoated fibers, neurite outgrowth was restricted by fibers displaying devoted or pitted nano topography when compared to neurite outgrowth on smooth fibers. However, neurites extending from whole DRG cultured …

Optimization Of The Catalytic Performance Of Pd/Fe 3 O 4 Nanoparticles Prepared Via Microwave-Assisted Synthesis For Pharmaceutical And Catalysis Applications, Hany A. Elazab, Tamer T. El-Idreesy

Chemical and Biochemical Engineering Faculty Research & Creative Works

Microwave assisted synthesis technique was used to prepare palladium supported on iron oxide nanoparticles. The advantage of using microwave irradiation as a synthetic tool is due to its unique features as a one step, simple, versatile, and rapid process. The reactants are added simply at room temperature without using high-temperature injection. Hydrazine hydrate was added by the following ratios (0.1, 0.2, 0.3, 0.4, 0.6, 0.8, 1, 1.6, and 3) ml to the different prepared samples at room temperature in order to investigate its effect on the catalytic performance of the prepared catalysts. The prepared catalyst could be used as an …

Continuous Catalytic Deoxygenation Of Waste Free Fatty Acid-Based Feeds To Fuel-Like Hydrocarbons Over A Supported Ni-Cu Catalyst, Ryan Loe, Yasmeen Lavoignat, Miranda Maier, Mohanad Abdallah, Tonya Morgan, Dali Qian, Robert Pace, Eduardo Santillan-Jimenez, Mark Crocker

Center for Applied Energy Research Faculty and Staff Publications

While commercial hydrodeoxygenation (HDO) processes convert fats, oils, and grease (FOG) to fuel-like hydrocarbons, alternative processes based on decarboxylation/decarbonylation (deCO_x) continue to attract interest. In this contribution, the activity of 20% Ni-5% Cu/Al₂O₃ in the deCO_x of waste free fatty acid (FFA)-based feeds—including brown grease (BG) and an FFA feed obtained by steam stripping a biodiesel feedstock—was investigated, along with the structure-activity relationships responsible for Ni promotion by Cu and the structural evolution of catalysts during use and regeneration. In eight-hour experiments, near quantitative conversion of the aforementioned feeds to diesel-like hydrocarbons was achieved. …

An Experimental Study Of Fractional Wettability Effects On Gas Assisted Gravity Drainage (Gagd), Abdullah Abdulrahman A. Al-Tameemi

LSU Master's Theses

Utilizing the power of nature to solve engineering problems has been a time-honored tradition, for example, using the sunlight as a heat and light source. From this principle, the visionary idea of Gas Assisted Gravity Drainage (GAGD) came. The GAGD process utilizes the natural segregation phenomenon of fluids with different densities in order to produce oil efficiently and economically. Waterflooding processes typically do not recover more than 40% of the original oil in place (OOIP), leaving a vast amount of oil behind. A practical and well-planned enhanced oil recovery (EOR) method is needed. However, to plan a successful project, the …

An Experimental And Numerical Investigation Of Flow Accelerated Flibe Corrosion, David B. Weitzel

Nuclear Engineering ETDs

Renewed interest in molten salt reactor technology has brought to light the need for a better understanding of FLiBe corrosion. To this end a flowing FLiBe corrosion test loop was designed to test the flow effects of FLiBe corrosion. The loop consists of a pump, melt tank, and stainless-steel tubing assembly that heats the molten salt to high temperatures and circulates it over test specimens. The experiment has been constructed and has completed initial shakedown testing.

To support the flowing FLiBe experiment, a numerical corrosion model that couples FLiBe electrochemistry, solid metal diffusion, and mass transport was implemented. The model …

Modeling Of Leakage Through Fault-Zone Structures In Co2 Geological Storage, Dayna Rodriguez Zambrano

LSU Master's Theses

Faults intersecting target geological CO₂ storage zones have important implications for storage integrity. Potential leakage pathways due to fluid over-pressurization are investigated in this project to ensure long-term containment of injected CO₂. Numerical flow simulations coupled with a geomechanical module are presented in this work with the purpose of determining the extent of CO₂ up-fault migration, the driving mechanisms of leakage and the corresponding response of quantified pore pressure and stress variations.

This study uses dual-continuum models performed by using CMG (2017) to correctly account of flow through fractures in a fault damage zone. Numerical simulations …

The Effect Of Electrospun Fiber Diameter On Astrocyte-Mediated Neurite Guidance And Protection, Christopher D.L. Johnson, Jonathan M. Zuidema, Kathryn R. Kearns, Alianna B. Maguire, Gregory P. Desmond, Deanna M. Thompson, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

The topography of electro spun fiber scaffolds modifies astrocytes toward in vivo-like morphologies and behaviors. However, little is known about how electro spun fiber diameter influences astrocyte behavior. In this work, aligned fibers with two distinct nanoscale fiber diameters (808 and 386 nm) were prepared, and the astrocyte response was measured over time. Astrocytes on the large diameter fibers showed significantly increased elongation as early as 2 h after seeding and remained significantly more elongated for up to 4 days compared to those on small diameter fibers. Astrocytes extending along larger diameter fibers were better equipped to support long neurite …

Coatings On Mammalian Cells: Interfacing Cells With Their Environment, Kara A. Davis, Pei-Jung Wu, Calvin F. Cahall, Cong Li, Anuhya Gottipati, Brad J. Berron

Chemical and Materials Engineering Faculty Publications

The research community is intent on harnessing increasingly complex biological building blocks. At present, cells represent a highly functional component for integration into higher order systems. In this review, we discuss the current application space for cellular coating technologies and emphasize the relationship between the target application and coating design. We also discuss how the cell and the coating interact in common analytical techniques, and where caution must be exercised in the interpretation of results. Finally, we look ahead at emerging application areas that are ideal for innovation in cellular coatings. In all, cellular coatings leverage the machinery unique to …

Reaction Of Titanium Subhydride With Multiple Passivating Gasses, Erik C. Strobert Jr

Chemical and Biological Engineering ETDs

Sandia National Laboratories has used substoichiometric titanium hydride as a pyrotechnic fuel for decades. Production of titanium subhydride requires partial dehydriding of titanium hydride powder and subsequent chemical passivation to render the resultant bare titanium surface nonreactive and the powder non-pyrophoric. Novel passivation techniques, using a gas other than air, have been suggested in the past but have never been investigated. This work examines the reaction kinetics of titanium subhydride with three passivating agents, nitrogen, oxygen, and propane. These passivation experiments took place under isothermal conditions (420 ˚C) with varied dehydriding and passivation time periods. It was found that the …

Integration Of Pretreatment With Simultaneous Counter-Current Extraction Of Energy Sorghum For High-Titer Mixed Sugar Production, Daniel L. Williams, Rebecca Ong, John E. Mullet, David B. Hodge

Michigan Tech Publications, Part 1

Sorghum (Sorghum bicolor L. Moench) offers substantial potential as a feedstock for the production of sugar-derived biofuels and biochemical products from cell wall polysaccharides (i. e., cellulose and hemicelluloses) and water-extractable sugars (i.e., glucose, fructose, sucrose, and starch). A number of preprocessing schemes can be envisioned that involve processes such as sugar extraction, pretreatment, and densification that could be employed in decentralized, regional-scale biomass processing depots. In this work, an energy sorghum exhibiting a combination of high biomass productivity and high sugar accumulation was evaluated for its potential for integration into several potential biomass preprocessing schemes. This included counter-current …

Effect Of Crystallization Modes In Tips-Pentacene/Insulating Polymer Blends On The Gas Sensing Properties Of Organic Field-Effect Transistors, Jung Hun Lee, Yena Seo, Yeong Don Park, John E. Anthony, Do Hun Kwak, Jung Ah Lim, Sunglim Ko, Ho Won Jang, Kilwon Cho, Wi Hyoung Lee

Center for Applied Energy Research Faculty and Staff Publications

Blending organic semiconductors with insulating polymers has been known to be an effective way to overcome the disadvantages of single-component organic semiconductors for high-performance organic field-effect transistors (OFETs). We show that when a solution processable organic semiconductor (6,13-bis(triisopropylsilylethynyl)pentacene, TIPS-pentacene) is blended with an insulating polymer (PS), morphological and structural characteristics of the blend films could be significantly influenced by the processing conditions like the spin coating time. Although vertical phase-separated structures (TIPS-pentacene-top/PS-bottom) were formed on the substrate regardless of the spin coating time, the spin time governed the growth mode of the TIPS-pentacene molecules that phase-separated and crystallized on the …

Injectable, Magnetically Orienting Electrospun Fiber Conduits For Neuron Guidance, Christopher D.L. Johnson, Debmalya Ganguly, Jonathan M. Zuidema, Thomas J. Cardinal, Alexis M. Ziemba, Kathryn R. Kearns, Simon M. Mccarthy, Deanna M. Thompson, Ganpati Ramanath, Diana A. Borca-Tasciuc, Silvio Dutz, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Magnetic electro spun fibers are of interest for minimally invasive biomaterial applications that also strive to provide cell guidance. Magnetic electro spun fibers can be injected and then magnetically positioned in situ, and the aligned fiber scaffolds provide consistent topographical guidance to cells. In this study, magnetically responsive aligned poly-l-lactic acid electro spun fiber scaffolds were developed and tested for neural applications. Incorporating oleic acid-coated iron oxide nanoparticles significantly increased neurite outgrowth, reduced the fiber alignment, and increased the surface nano topography of the electro spun fibers. After verifying neuron viability on two-dimensional scaffolds, the system was tested as an …

Investigation Of Microwave-Assisted Synthesis Of Palladium Nanoparticles Supported On Fe3o4 As Efficient Recyclable Magnetic Catalysts For Suzuki-Miyaura Cross-Coupling, Hany A. Elazab Dr

Chemical Engineering

In this research, a facile and reproducible approach was implemented for synthesis of palladium nano particles supported on Fe₃O₄ with remarkable activity as an ideal catalyst for Suzuki Cross – Coupling. Magnetite supported Pd nano particles reveals a high activity towards Suzuki coupling reactions as it could be recycled up to seven times with the same high catalytic activity. This adopted method of catalyst synthesis has so many advantages as reproduciblity, and reliability of the adopted synthetic method. The produced catalyst has unique magnetic properties to facilitate the catalyst recovery from the reaction mixture through using a …

Optimization Of The Catalytic Performance Of Pd/Fe3o4 Nanoparticles Prepared Via Microwave-Assisted Synthesis For Pharmaceutical And Catalysis Applications, Hany A. Elazab Dr

Chemical Engineering

Microwave assisted synthesis technique was used to prepare palladium supported on iron oxide nanoparticles. The advantage of using microwave irradiation as a synthetic tool is due to its unique features as a one step, simple, versatile, and rapid process. The reactants are added simply at room temperature without using high-temperature injection. Hydrazine hydrate was added by the following ratios (0.1, 0.2, 0.3, 0.4, 0.6, 0.8, 1, 1.6, and 3) ml to the different prepared samples at room temperature in order to investigate its effect on the catalytic performance of the prepared catalysts. The prepared catalyst could be used as an …

Facile Synthesis Of A Tailored-Designed Au/Pt Nanoanode For Enhanced Formic Acid, Methanol, And Ethylene Glycol Electrooxidation, Yaser M. Asal Mr., Islam M. Al-Akraa Dr, Ahmad M. Mohammad Prof

Chemical Engineering

The recent revolution in nanoscience and global energy demand have motivated research in liquid fuel cells (LFCs) due to their enhanced efficiency, moving flexibility, and reduced contamination. In line with this advancement, a glassy carbon (GC) electrode was modified with platinum (PtNPs) and gold (AuNPs) nanoparticles to fabricate a nanosized anode for formic acid, methanol, and ethylene glycol electrooxidation (abbreviated, respectively, to FAO, MO, and EGO), of the key anodic reactions of LFCs. The deposition sequence of the catalyst’s layers was important where the Au/Pt/GC electrode (in which PtNPs were directly deposited onto the GC surface followed by AuNPs—surface coverage …

Zeolitic 3d Scaffolds With Tailored Surface Topography For Methanol Conversion With Light Olefins Selectivity, Ali A. Rownaghi, Xin Li, Fateme Rezaei

Chemical and Biochemical Engineering Faculty Research & Creative Works

The present disclosure relates to 3D printed zeolite scaffolds . The zeolite scaffolds can be used as a catalyst for methanol to olefin ( MTO ) conversion and hydrocarbon cracking processes.

Towards More Stable And Ion-Conductive Organic Electrolytes For Rechargeable Batteries, Shuting Feng

Link Foundation Energy Fellowship Reports

The global society urgently needs to remedy the effects of climate change resulting from burning fossil fuels and significantly increase the utilization of renewable energy. Rechargeable batteries are important enablers of sustainable energy use, as they can be employed to store energy generated from renewable but intermittent source. Enhancing the functionality of battery electrolytes, such as (electro)chemical stability and ion conductivity, can improve battery energy density, operation efficiency, and safety. This project explores strategies to improve the stability and ion conductivity of organic electrolytes for rechargeable batteries. Special attention is given to aprotic lithium-oxygen (Li-O2) batteries, which offer theoretical energy …

Neutrophil Extracellular Traps In Breast Cancer And Beyond: Current Perspectives On Net Stimuli, Thrombosis And Metastasis, And Clinical Utility For Diagnosis And Treatment, Hunter T. Snoderly, Brian A. Boone, Margaret F. Bennewitz

Faculty & Staff Scholarship

Abstract

The formation of neutrophil extracellular traps (NETs), known as NETosis, was first observed as a novel immune response to bacterial infection, but has since been found to occur abnormally in a variety of other inflammatory disease states including cancer. Breast cancer is the most commonly diagnosed malignancy in women. In breast cancer, NETosis has been linked to increased disease progression, metastasis, and complications such as venous thromboembolism. NET-targeted therapies have shown success in preclinical cancer models and may prove valuable clinical targets in slowing or halting tumor progression in breast cancer patients. We will briefly outline the mechanisms by …