Engineering Commons^™

Phosphine Oxide Containing Poly(Pyridinium Salt)S As Fire Retardant Materials, Maksudul M. Alam, Bidyut Biswas, Alexi K. Nedeltchev, Haesook Han, Asanga D. Ranasinghe, Pradip K. Bhowmik, Kisholoy Goswami

Chemistry and Biochemistry Faculty Research

Six new rugged, high-temperature tolerant phosphine oxide-containing poly(4,4′-(p-phenylene)-bis(2,6-diphenylpyridinium)) polymers P-1, P-2, P-3, P-4, P-5, and P-6 are synthesized, characterized, and evaluated. Synthesis results in high yield and purity, as confirmed by elemental, proton (1H), and carbon 13 (13C) nuclear magnetic resonance (NMR) spectra analyses ... See full text for complete abstract.

Notes On The Economics Of Residential Hybrid Energy System, Mahelet G. Fikru, Gregory M. Gelles, Ana M. Ichim, Joseph D. Smith

Economics Faculty Research & Creative Works

Despite advances in small-scale hybrid renewable energy technologies, there are limited economic frameworks that model the different decisions made by a residential hybrid system owner. We present a comprehensive review of studies that examine the techno-economic feasibility of small-scale hybrid energy systems, and we find that the most common approach is to compare the annualized life-time costs to the expected energy output and choose the system with the lowest cost per output. While practical, this type of benefit—cost analysis misses out on other production and consumption decisions that are simultaneously made when adopting a hybrid energy system. In this paper, …

Modeling The Interplay Between Photosynthesis, Co2 Fixation, And The Quinone Pool In A Purple Non-Sulfur Bacterium, Adil Alsiyabi

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Rhodopseudomonas palustris CGA009 is a purple non-sulfur bacterium (PNSB) that can fix CO₂ and nitrogen or break down organic compounds for its carbon and nitrogen requirements. Light, inorganic, and organic compounds can all be used for its source of energy. Excess electrons produced during its metabolic processes can be exploited to produce hydrogen gas or biodegradable polyesters (polyhydroxybutyrate). A genome-scale metabolic model of the bacterium was reconstructed to study the interactions between photosynthesis, carbon dioxide fixation, and the redox state of the quinone pool. A comparison of model-predicted flux values with published in vivo MFA fluxes resulted in predicted …

High Octane Number Gasoline-Ether Blend, Tarek M. Aboul-Fotouh, Sherif K. Ibrahim, M. A. Sadek, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

Gasoline produced in Egypt is a low-grade gasoline that contains high concentration of harmful components that are having a toll on our environment. In addition, those pollutants cause countless diseases and deaths annually to the Egyptian population. This paper targets two main sectors in the production of commercial gasoline. The improvement engine efficiency through the upgrading of octane number is first experimented by using a blend stock that ranges from gasoline fractions and Isomerates. An optimum was then chosen depending on the results obtained from different tests. Through those experiments, it was determined which samples obeyed the EU regulation for …

Bioproduction Of Adipic Acid Using Engineered Pseudomonas Putida Kt2440 From Lignin-Derived Aromatics, Howard Willett

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Current industrial synthesis of adipic acid is nonrenewable and depends on a carcinogenic starting material, benzene. Biocatalysis with an engineered microorganism could turn a renewable feedstock into a value-added chemical such as adipic acid. Here we engineered P. putida KT2440 to transform lignin-derived aromatics, coumarate and ferulate, into adipic acid. Lignin is a recalcitrant plant biopolymer burned for thermal energy. Conversion of lignin into a value-added chemical will improve the efficiency of lignocellulose processing plants. The best performing engineered KT2440 strain produces 2.52 mM adipate at a 9.5% (mole/mole) yield. This was achieved by the genetic insertion of non-natural biosynthetic …

Recycling Of The Mixture Resulted From Roller Kiln Waste And Ceramic Tiles Sludge Waste In The Manufacturing Of Ceramic Floor Tiles, Mai H. Roushdy

Chemical Engineering

Ceramic tiles industry produced many types of wastes that are routinely discarded as stock piles. One of the environmental problems associated with roller kilns is the periodic need to grind its rollers which results in a waste powder. The second type of waste is ceramic tiles sludge which produced from a water treatment plant in the ceramic tiles factory. This paper investigates the probability of substituting part of the main body of floor tiles mixture by these two types of waste powder. Many Experiments were done on the raw materials. Rectangular tile specimens were molded, dried and fired. Linear firing …

Energy Transformation And Conservation Investigation, Mike Jackson, Holly Haney

High School Lesson Plans

Students will use a thermoelectric generator module to analyze the relationship between thermal and electrical energies. Using data collection sensors and analysis software, students will investigate the relationship between the temperature gradient across a thermoelectric generator module and the resulting electrical potential. Students will then use their data and analysis to solve problems relating to waste thermal energy in electrical systems and communicate their work to their peers and teacher.

Ranking And Clustering Of Drosophila Olfactory Receptors Using Mathematical Morphology, Jayanta Kumar Das, Pabitra Pal Choudhury, Neelambuj Chaturvedi, Mohd Tayyab, Sk Sarif Hassan

Journal Articles

This article introduces an alignment-free clustering method in order to cluster all the 66 DORs sequentially diverse protein sequences. Two different methods are discussed: one is utilizing twenty standard amino acids (without grouping) and another one is using chemical grouping of amino acids (with grouping). Two grayscale images (representing two protein sequences by order pair frequency matrices) are compared to find the similarity index using morphology technique. We could achieve the correlation coefficients of 0.9734 and 0.9403 for without and with grouping methods respectively with the ClustalW result in the ND5 dataset, which are much better than some of the …

Correlating Pressure, Fluidization Gas Velocities, Andsolids Mass Flowrates In A High-Pressurefluidized Bed Coal Feed System, Jacob Talailetalalelei Tuia

Theses and Dissertations

The goal of this thesis was to understand what parameters would be most impactful when delivering dry, pulverized coal in a dilute-phase, with a high-pressure feed-system to a pressurized oxy-combustion (POC) reactor. Many studies have conveyed materials in dense-phase plugs at high-pressure or in dilute-phase flows at atmospheric pressure. Very few studies have fluidized and conveyed materials in dilute-phase flows at high pressure, as we needed to. Additionally, studies which might have been applicable based upon system -pressure and -phase delivered findings that were empirically based and therefore not specifically applicable to non-similar systems. 220 different tests were ran using …

Carbon Nanotube And Cellulose Nanocrystal Hybrid Films, Mingzhe Jiang, Robert Seney, Paul Charles Bayliss, Christopher L. Kitchens

Publications

The use of cellulose nanocrystals (CNC) in high performance coatings is attractive for micro-scale structures or device fabrication due to the anisotropic geometry, however CNC are insulating materials. Carbon nanotubes (CNT) are also rod-shaped nanomaterials that display high mechanical strength and electrical conductivity. The hydrophobic regions of surface-modified CNC can interact with hydrophobic CNT and aid in association between the two anisotropic nanomaterials. The long-range electrostatic repulsion of CNC plays a role in forming a stable CNT and CNC mixture dispersion in water, which is integral to forming a uniform hybrid film. At concentrations favorable for film formation, the multiwalled …

Liquid Phase Modeling In Heterogeneous Catalysis, Mohammad Shamsus Saleheen

Theses and Dissertations

Conversion of lignocellulosic biomass into transportation fuels or commodity and specialty chemicals will be an important and fast-growing industry within the United States over the coming decades. Its growth will be driven by a variety of factors, including increased energy demands, environmental considerations, national security, and government mandates. To achieve the desired energy efficiency and economic impact, the emerging biorefining industries need novel heterogeneous catalysts with exceptional activity, selectivity, and stability. Catalytic materials developed in the petrochemical industries are generally not suitable for processing highly functionalized feedstocks typical of the biorefinery landscape. Due to the characteristics of this biomass feedstock …

Enabling High Energy Density Aluminum Anodes For Alkaline Batteries, Xinyi Zhao

Theses and Dissertations

Zn-MnO₂ primary alkaline batteries stood out immediately among all batteries after it was introduced in the late 1980s and has attracted world-wide attention. These batteries have dominated the portable power market for decades as a highly effective energy storage system with high energy density, long life and low self-discharge, dependable safety and other superiorities.

In order to achieve higher cell-level energy density, Aluminum has long been considered a very attractive anode material for alkaline batteries because of its high theoretical capacity (2980 mAh/g; 2.60 Ah/cm³) and low price. However, some early efforts to utilize aluminum anodes did …

Flame Spray Pyrolysis Of Ce-Mn Solid Solutions For Catalytic Applications, Nicole Cordonnier

Theses and Dissertations

Flame spray pyrolysis (FSP) is a method of quickly synthesizing active particles in a flame. Precursors are dissolved in a flammable organic solvent before being sprayed into the flame environment where they rapidly burn. Particle formation occurs on the order of 10 milliseconds. FSP has been shown to be a viable method of producing materials on an industrial scale, capable of producing grams of particles per minute. Metastable structures which exist in the liquid phase, but are difficult to synthesize using traditional impregnation methods can be formed with FSP due to fast quenching times. For example, solid solutions of Ce-Zr …

Physico-Chemical Characteristics Of Ethanol–Diesel Blend Fuel, Tarek M. Aboul-Fotouh, Eslam Alaa, M. A. Sadek, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

In this research we are discussing the physicochemical characteristics of sweet diesel after desulphurization alone and also these characteristics are tested with the adding of high purity HPLC ethanol (99.9%). Those fuel properties of ethanol blended with diesel were experimentally determined to find their stability and to increase their properties and efficiency in the diesel engines. First, we made 4 blends of diesel with ethanol and the fifth sample was pure diesel. The samples were 0% ethanol and 100 % diesel, the second sample was 5% ethanol and 95 % diesel, the third sample was 10 % ethanol and 90% …

Advanced Measurement Techniques For Enabling Multiphase Reactors And Flow Systems For Sustainable And Cleaner Processes, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

No abstract provided.

A Simple And Effective Way To Overcome Carbon Monoxide Poisoning Of Platinum Surfaces In Direct Formic Acid Fuel Cells, Yaser M. Asal Mr., Islam M. Al-Akraa Dr, Sohair A. Darwish Ms

Chemical Engineering

A glassy carbon (GC) electrode modified with multi-walled carbon nanotubes (MWCNTs) and platinum nanoparticles (PtNPs), Pt/MWCNTs-GC, has been introduced for formic acid electro-oxidation (FAO). A similar loading of PtNPs has been conserved for a proper comparison between the Pt/MWCNTs-GC and the unmodified Pt/GC electrodes. The modification with MWCNTs could enhance the loading of PtNPs onto the GC electrode in a way that minimizes its agglomeration and increases its dispersion in the CNTs network. This not only increases the surface area exposed to the reaction but also interrupts the contiguity of the Pt active sites minimizing the adsorption of the poisoning …

A Promising Modification Of Pt Surfaces With Cnts For Decreasing Poisoning Impact In Direct Methanol Fuel Cells, Yaser M. Asal Mr., Islam M. Al-Akraa Dr, Aya A. Khalifa Ms.

Chemical Engineering

Direct methanol fuel cells (DMFCs) are clean energy sources that have many applications due to the high energy density of methanol as a fuel. However, this type of fuel cells (FCs) has limitations that are preventing it from being commercialized. One such limitation is the adsorption of intermediates such as CO into the surface of the Platinum (Pt) catalyst during methanol oxidation (MO) which deactivates its active sites, where the reaction is taking place, and leads to poisoning of the electrode over the long term. In this study, multi-walled carbon nanotubes (MWCNTs) have been introduced to the Pt-modified glassy carbon …

Influence Of Tempering And Cryogenic Treatment On Retained Austenite And Residual Stresses In Carbonitrided 18crnimo7-6 Low Alloy Steel, Richard Katemi

Tanzania Journal of Engineering and Technology (TJET)

This work investigated the influence of tempering conditions coupled with cryogenic treatment on thermal stabilization of retained austenite and residual stress distributions in carbonitrided 18CrNiMo76 low alloy steel samples. The carbonitriding conditions were set to enable attaining surface carbon and nitrogen content of 0.87 and 0.34 mass.-percent respectively. After carbonitriding, some of the samples were subjected to varying tempering conditions followed by cryogenic treatment at-120 °C using nitrogen gas. Analysis of both retained austenite and residual stresses was conducted using X-ray diffraction. In the as-quenched state, carbonitrided samples contained 52 mass.-percent. Samples that were directly subjected to the cryogenic treatment …

Electrocatalytic Nanomaterials For Reduction Of Hydrogen Peroxide As Potential Radioprotectors, Rui-Hong Jia, Jin-Xuan Zhang, Xiao-Dong Zhang, Mei-Xian Li

Journal of Electrochemistry

Nanomaterials have shown many potential application prospects in the biomedical field, such as medical imaging, drug delivery and biosensing due to their unique physical and chemical properties. In this review we focus on nanomaterials that have shown not only abilities of radiation protection, but also good electrocatalytic activities toward reduction reactions of hydrogen peroxide and oxygen. We discuss the abilities of radiation protection of these nanomaterials that are ascribed to their enzyme-like activities because their catalytic properties provide an effective pathway for scavenging free radicals in vivo via rapid reactions with reactive oxygen species. We also provide insights into electrocatalytic …

Fibrinogen, Factor Xiii And Fibronectin: A Biophysical And Kinetic Characterization Of Their Interactions, Frank Fabian

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

The development of recombinant-based liquid fibrin tissue sealants having enhanced hemostatic and wound healing properties will involve understanding as yet not well characterized interactions between fibrinogen, fibrin (Fbn) factor XIII, thrombin and fibronectin. We study these phenomena in the context of comparing plasma derived fibrinogen to recombinant fibrinogen (rFI) produced in the milk of transgenic cows. An abundance of purified γγ and γγ’ FI subspecies enables detailed study of γγ or γγ’ biomonomer and their respective Fbn biopolymer formation as having different substrate behaviors of activated plasma derived factor XIII (pFXIIIa₂b₂). High pressure size exclusion (HPSEC) …

Responsive Coatings And Functional Systems From Pectin Polysaccharides, Zeinab Veisi

USF Tampa Graduate Theses and Dissertations

Pectin polysaccharides provide promising potential as all-natural, non-toxic “green” coatings. Pectin polysaccharides have been drawing growing attention as elements of stimuli-responsive systems and as source materials for functionalized robust coatings. They can be extracted from several natural sources and are intrinsically biocompatible. The majority of the applications of pectin gels require a better understanding of the properties of thin layers of gels at surfaces and interfaces. Despite the prevalence of bulk gels of pectin, coatings of pectin have not been reported. In bulk hydrogels, swelling of polymer networks is controlled by a diffusion limited transport process in which the rate …

Carbon Dioxide Adsorption Using Solid Amine Sorbents, Umadevi Gopalakrishnan

USF Tampa Graduate Theses and Dissertations

Biogas, being rich in methane, can be used as a fuel for various end uses such as electricity generation, compressed natural gas (CNG), production of liquid fuels, industrial heating, etc. CO₂ is the major contaminant in biogas (30–50%) along with other impurities such as NH₃, H₂S, and water. CO₂ in the biogas decreases the heating value of biogas. Natural gas pipelines and vehicle use require high purity (> 95%) CH₄. There are many commercial techniques available for CO₂ removal from biogas such as such water scrubbing (WS), chemical scrubbing (CS) using …

Development Of Automated Control Systems For Pilot-Scale Combustors In The New Byu Engineering Building Annex, Andrew Fry

Journal of Undergraduate Research

The purpose of this MEG grant was to train 3 undergraduate students from either Chemical or Mechanical Engineering on the use of OPTO 22 control system and then to direct them, along with the input from engineers at OPTO 22, as they build and install a control system and logic for the Burner Flow Reactor (BFR), Multi Fuel Reactor (MFR) and the Pressurized Oxy Coal (POC) reactors in the new Engineering Research Laboratory (ERL). This program is comprised of 6 tasks as follows:

Effect Of Promoter (Mn) On The Performance Of Sba-15 Supported Iron Catalysts For High Temperature Fischer-Tropsch Synthesis, Sreya Mariya Seby

USF Tampa Graduate Theses and Dissertations

Development of an effective High Temperature Fischer-Tropsch Synthesis (HTFTS) catalyst is of interest in process intensification that combines methane reforming with long chain hydrocarbon production. Literature indicates iron catalysts supported on mesoporous silica performed relatively well in high temperature applications. In this work, we investigated the effect of manganese promoter on iron catalysts for FTS at 430 °C as it was known from previous studies that manganese promotion could enhance the CO conversion with higher hydrocarbon yields. Also, the effect of temperature on FTS activity was evaluated by testing the base and promoted Fe/SBA-15 catalysts for temperature ranging from 370 …

Method Of Forming Microparticles For Use In Cell Seeding, Sutapa Barua, Chase Herman

Chemical and Biochemical Engineering Faculty Research & Creative Works

The present invention is directed to methods for forming microparticles useful for cell seeding and for conjugating protein to the surface of the microparticles. The method comprises co-injecting an organic solution of PLGA or other polymer with an aqueous solution into a flow focusing tube.

A Combined Computational/Experimental Approach To Stabilize Proteins With Unnatural Amino Acid Modifications, Joshua Wilkerson, Dr. Thomas Knotts

Journal of Undergraduate Research

Proteins are versatile biological molecules that catalyze chemical reactions, provide cellular structure, and transport materials throughout the body. Proteins have been adapted for use in a wide variety of industries including food processing, medical diagnostics, and therapeutics. However, proteins must often be modified to enhance their utility in these operations. One method that can be used as an initial step in protein modification strategies is replacement of a naturally occurring amino acid with an unnatural amino acid (uAA). Previous research has suggested that it is very difficult to predict the stability of a uAA-modified protein based on any individual factor. …

Sorption Of Benzene, Tolueneand Ethylbenzeneby Plasticized Pema And Pema/Pmma Sensing Films Using Aquartz Crystal Microbalance (Qcm) At 298.15k, Deekshitha Adapa

USF Tampa Graduate Theses and Dissertations

Detection of volatile organic compounds (VOC’s) in the environment is important for human health and wellness. Long term exposure of certain VOC’s like benzene, toluene, ethylbenzene and xylene (BTEX) has a severe effect on human health. There are techniques such as gas chromatography, photo ionization, and mass spectroscopy that are time consuming, require gas sampling and are ineffective in real time sensing in air. Acoustic wave devices such as surface acoustic wave (SAW) devices can be used for sensing BTEX compounds in both vapor and liquid phase. The quartz crystal microbalance (QCM) is a low-frequency acoustic wave device, which can …

Multichannel Ubm Conduit For Peripheral Nerve Repair, Elizabeth Mahoney, Alonzo Cook

Journal of Undergraduate Research

Neuropathy, disease, and trauma to the peripheral nervous system cause devastating effects. These effects can include both a loss of sensation and a loss of motor control. Due to the newness of the field of regenerative medicine, scientists are only beginning to understand how nerves regenerate. It is known that when damage occurs to the nerves, the body triggers a regeneration process. Unfortunately, this process is slow and the level of sensation that returns and motor control varies from person to person. Some options involving autografts and allografts have been employed to help the nerve endings regenerate to all distal …

Towards On-Demand E. Coli-Based Cell-Free Protein Synthesis Of Tissue Plasminogen Activator, Seung-Ook Yang, Gregory H. Nielsen, Kristen M. Wilding, Merideth A. Cooper, David W. Wood, Bradley Charles Bundy

Faculty Publications

Stroke is the leading cause of death with over 5 million deaths worldwide each year. About 80% of strokes are ischemic strokes caused by blood clots. Tissue plasminogen activator (tPa) is the only FDA-approved drug to treat ischemic stroke with a wholesale price over $6000. tPa is now off patent although no biosimilar has been developed. The production of tPa is complicated by the 17 disulfide bonds that exist in correctly folded tPA. Here, we present an Escherichia coli-based cell-free protein synthesis platform for tPa expression and report conditions which resulted in the production of active tPa. While the activity …

Evaluation Of Novel Molten Salt Eutectics And Their Application In Novel Reactor Designs, Kraig Farrar, Matthew Memmott

Journal of Undergraduate Research

Molten salt reactors (MSR) are a relatively unexplored but promising technology for civilian nuclear power. Original experiments with this technology was performed by Oak Ridge National Laboratory (ORNL) in the 1950s and 1960s. While this research was successful, it ultimately failed to receive additional funding and the program was cancelled as a result. Recently interest in MSR technology has resurged due to its promise of producing nuclear power at atmospheric pressure, high efficiency, and without the production of long lived waste. The purpose of this project is to determine the ideal material to use as both a fuel and coolant.