Engineering Commons^™

Synchronization Of The Training Of Specialists In The Automation Of Technological Processes In Accordance With The Dynamics Of The Taxonomy Of Learning Goals, Yusuf Shodievich Avazov, Kamola Abdullaeva

Chemical Technology, Control and Management

Changes in the characteristics of modern ones, reflecting them as the "digital generation", inevitably necessitate electronic interactive, mobile and mixed, machine learning, especially in the field of automation and control of technological processes and production. As a consequence of reflecting these realities, there have been parallel changes in the taxonomy of learning objectives - from the classical to the revised rethought and digital.

In order to study the problem of synchronizing the training of future specialists in the field of automation and control of technological processes and production and funny knowledge in accordance with the dynamics of the taxonomy of …

Analysis Of Vegetable Oil Refining Technology, Elyor Samadov

Chemical Technology, Control and Management

Innovative technologies for refining vegetable oils are presented, as well as the qualitative characteristics of raw vegetable oils obtained by extraction and mechanical methods. A general review of the chemical composition and impurities of vegetable oils resulting from the reaction between glycerol and fatty acids is carried out, and a brief review of the study to determine the effect of refining on biologically active components.

The analytical review is devoted to a comparative comparison of two types of refining - chemical and physical refining.

Research Of Three-Phases Current’S Transducers Of Filter-Compensation Devices For Control Reactive Power’S Consumption Of Asynchronous Motor, Ilkhomjon Khakimovich Siddikov, Dilyorbek Karimjonov Doniyorbek O'G'Li -, Abdumutal Abdikarimovich Abdigapirov

Chemical Technology, Control and Management

In the article given materials of developing of three-phase electromagnetic current transducers of reactive power, using with asynchronous motor, methods connecting of two sensing element, series, parallel and differential and loops suitable for each phase, dynamic characteristics of output signals of three-phase electromagnetic current transducers asynchronous motor.

On the basis of modern calculation and design complexes are of great importance in the research variable sizes of three-phase current electromagnetic transducers of filter-compensation devices of reactive power of asynchronous motors. Presented mathematical model of research of electrical, electromagnetic and magnetic elements of electromagnetic current transducers in the …

Advances And Challenges On Cathode Catalysts For Lithium-Oxygen Batteries, Bo Wen, Zhuo Zhu, Fu-Jun Li

Journal of Electrochemistry

Aprotic lithium-oxygen batteries (LOBs) with high theoretical energy density have received considerable attention over the past years. However, the oxygen reduction reaction (ORR)/oxygen evolution reaction (OER) at cathodes suffer from slow kinetics for large overvoltages in LOBs. Significant advances on catalysts have been achieved to accelerate cathode kinetics, but understanding on the formation/decomposition processes of Li₂O₂ is limited. Herein, this review highlights the fundamental understanding of the correlation between catalysts and formation/decomposition of Li₂O₂. Various types of cathode catalysts are discussed to reveal the mechanism of formation/decomposition of Li₂O₂, …

Recent Advances In Anode Materials Of Solid Oxide Electrolysis Cells, Geng Zou, Wei-Cheng Feng, Yue-Feng Song, Guo-Xiong Wang

Journal of Electrochemistry

Solid oxide electrolysis cell (SOEC) as an electrochemical energy conversion device has attracted increasing attention due to its large current density, high Faradaic efficiency and energy efficiency. Oxygen evolution reaction at the anode, a four-electron transfer process, is an important half-reaction for SOEC, which contributes to the main polarization resistance and consumes most electric energy during the electrolysis process. Hence, designing anode materials with high activity and stability is crucial for the performance improvement and practical application of SOEC. Recently, some advances have been made in the development of high-performance anode. In the current review, the mechanisms for CO_{2 …}

Anodic Electrocatalysis Of Glycerol Oxidation For Hybrid Alkali/Acid Electrolytic Hydrogen Generation, Xin Feng, Bo-Wen Liu, Ke-Xin Guo, Lin-Feng Fan, Gen-Xiang Wang, Su-Qin Ci, Zhen-Hai Wen

Journal of Electrochemistry

Electrolytic hydrogen production is heavily restricted by high-energy consumption majorly due to the relatively high potential of anodic oxygen evolution reaction (OER). Development of OER-alternative reaction at the anode has been recently proposed as a promising pathway to address the associated issues. In this work, we report a hybrid acid/alkali dual-electrolyte electrolyzer by coupling acidic hydrogen evolution reaction (HER) using commercial Pt/C cathode with alkaline Electrocatalytic glycerol oxidation (GOR) which is implemented by developing a nickel foam (NF) supporting Co₃O₄ nanosheets anode that shows low overpotential and high selectivity toward GOR for formate production. The hybrid acid/alkali …

Towards Lean Manufacturing In Developing Countries: Research Gaps And Directions In Tanzania, Francis D. Sinkamba

Tanzania Journal of Engineering and Technology (TJET)

In the current knowledge-driven economy, many industries across the globe are forced to adopt manufacturing technologies such as lean manufacturing to remain competitive in the globalized world. Despite the increase in lean manufacturing implementations, the adoption rate in Tanzania is very low and estimated to be 8 percent. Likewise, the sustainability of lean manufacturing tools and practices is still questionable, which shows the need to develop lean maturity models. To date, several lean maturity models have been developed but there is ARTICLE INFO Submitted: July 5, 2022 Revised: Sept. 28, 2022 Presented: Oct. 20, 2022 a lack of maturity models …

Extraction And Characterization Of Collagen From Cattle Horns For Potential Wound Healing, Yeriko Halson

Tanzania Journal of Engineering and Technology (TJET)

The need for bandages and gauze for wound dressing and healing is inevitable due to the high increase in accidents. Most of the material used for the production of bandages and gauzes for wound healing are from non-renewable synthetic material. The sustainability of non renewable resources is at jeopardy due to the health and associated environmental impact. Consequently, the use of naturally occurring and biodegradable material is a promising solution to the sustainability challenges of synthetic material. In this paper, the extraction of collagen films from cattle horns for potential wound healing is reported. Collagen was extracted from cattle horns …

Current And Future Trends Of Construction Project Performance Models: A Review, Method Mtana

Tanzania Journal of Engineering and Technology (TJET)

The construction industry (CI) has experienced outstanding growth and contributed to economic growth for many countries, with enormous foreign investments that require quality projects. High pressure to reduce the construction cost and time commonly put the industry at risk of lower quality and safety of the construction facilities. Like many other developing countries, Tanzania needs more stringent quality control measures in the construction sector to contribute positively to sustainable growth. This study thus reviews current and future trends in construction industry performance in Tanzania. The literature review on construction projects (CPs) performance is based on information on time overruns from …

Factors Influencing Total Productive Maintenance Implementation For Thermal Generation Plants, Ismail W. R. Taifa Dr

Tanzania Journal of Engineering and Technology (TJET)

This study accepts that the technical and administrative factors can amplify effective total productive maintenance (TPM) implementation at thermal generation plants. It is noted that there is a limited number of studies that have attempted to understand the subject of TPM implementation in the energy sector. Noting this shortcoming, the authors thought it crucial to generate empirical evidence on the factors influencing effective TPM implementation for thermal generation plants, with evidence from gas-fired plants. A sample of 88 respondents was selected and consulted. Data were collected through questionnaires and analyzed quantitatively by inferential statistics and qualitatively through thematic analysis using …

Towards The Development Of A Framework For Assessing Organizational Governance Maturity For Technical Audit Of Public Works, George Haule

Tanzania Journal of Engineering and Technology (TJET)

The quality of the audit work and its products is often associated with the organizational maturity of the audit function. The absence of a well-defined organizational maturity for an audit function leads to poor quality of audit work or products and ineffective audit function. The lack of a framework for measuring governance maturity was identified as a major deterrent factor to the attainment of quality audit work. Measuring the governance maturity of the technical audit of public works is challenging due to the absence of a maturity framework that fits its needs. The noted shortcomings include: (a) existing maturity frameworks …

3d Printed Composite Structures For Bone Repair And Drug Delivery Application, Innocent J. Macha

Tanzania Journal of Engineering and Technology (TJET)

Due to the increase in traffic accidents, industrial contingencies, and natural disasters, there is a high demand for bone regeneration biomaterials. Although bone can regenerate and self-repair, it is difficult to do so when the defect area exceeds the critical repair area due to trauma, tumour resection, or congenital diseases. The traditional methods for bone repair are autograft, allograft, and xenograft. However, these methods have flaws and limitations, such as complications in the donor bone area, a limited number of donors, rejection, and infectious diseases. However, in recent years, the use of additive manufacturing technologies in bone tissue engineering has …

Preparation And Characterization Of Microporous Cellulose Membranes As Potential Pathogen Filters, Peresi M. Bulemo

Tanzania Journal of Engineering and Technology (TJET)

Growth and development in the textile and fashion industry have resulted in the generation of large amounts of industrial pre consumer textile wastes. It is estimated that 10 to 20% of textile fabrics are wasted during garment manufacturing, with most of the wastes being burned or landfilled. Reusing pre-consumer fabric wastes is therefore considered a viable approach to alleviate environmental impacts associated with their disposal. To achieve a higher porosity membrane, pre-consumer cotton fabrics were partially dissolved in a solution of dimethyl acetamide (DMAc) and lithium chloride (LiCl), and the resulting fibre suspension was utilized to prepare a microporous cellulose …

Dynamic Multi-Dimensional Numerical Transport Study Of Lithium-Ion Battery Active Material Microstructures For Automotive Applications, Joseph S. Lopata, Taylor R. Garrick, Fengkun Wang, Han Zhang, Yangbing Zeng, Sirivatch Shimpalee

Faculty Publications

In support of GM’s traction battery efforts, we derived and implemented a method to describe the electrochemical performance of a battery cell considering the nuances of the electrode microstructure at the anode and the cathode and the corresponding impact on the electrochemical transport in the solid and liquid phases. To assess the capability of the method, we compared model results from the microstructure framework with the commonly used continuum-level porous electrode model, commonly referred to as the pseudo-2-dimensional model, or the Newman Model. The microstructure modeling framework was applied to simulate the electrochemical and transport processes within the battery cell …

Exploring Current And Future Research Trends On Safety Climate In Construction Projects, Kamugisha Joseph Kajumulo

Tanzania Journal of Engineering and Technology (TJET)

Clients, consultants, and contractors in the construction industry can benefit from a safety climate by obtaining knowledge of attitudes and perceptions for better safety outcomes. However, the current and future research trends for safety climate in construction projects have not yet been fully examined. In order to solve this problem, a systematic review of previous research findings using a social network approach must be conducted, and future trends for the safety climate in building projects must be identified. Sixty-three peer reviewed articles were gathered to study the literature on safety climate in construction projects. A social network approach was employed …

The Fourth Industrial Revolution: Opportunities And Challenges To The Future Of Mechanical Engineering, Ulingeta O.L. Mbamba

Tanzania Journal of Engineering and Technology (TJET)

This paper provides a conceptual overview of the developments of the Fourth Industrial Revolution (4IR) and derives challenges and opportunities for the future of the mechanical engineering profession. The paper broadly defines 4IR as the fusion of technologies and interaction across physical, digital and biological aspects, while defining mechanical engineering as "a multi-faceted discipline that encompasses the teaching, practice and guidance of others in the development and application of scientific principles to mechanical systems". The paper looks specifically at developments in the Internet of Things (IoT), blockchain technology, robotics, Big Data analytics, biotechnology, nanotechnology, 3D printing and artificial intelligence and …

Cellulose-Keratin Supramolecular Composite: Conformation By Combined Fourier Transform Spectroscopy And Partial Least Square Regression Coefficient, Ngesa Ezekiel Mushi Dr

Tanzania Journal of Engineering and Technology (TJET)

Keratin and cellulose are important nano components with excellent mechanical and biological properties. However, the preparation route through dissolution in organic solvents to make manmade materials is challenging because of their intensive bonding interaction characteristics. Structural modification of the natural attributes is difficult to maintain after polymer regeneration. A new technique by a green route was devised to dissolve keratin from wool, hair, and feather with cellulose in situ using 1-Butyl-3-methylimidazolium chloride [BMIm] + Cl- ionic liquid as a solvent. The mixture of keratin and cellulose homogeneously and synergistically resulted in a supramolecular composite film through non-derivatized mechanochemical interactions. The …

Designing And Manufacturing Of Vegetable Slicing Machine, Juma Nuhu Msuya

Tanzania Journal of Engineering and Technology (TJET)

Agro-processing industry is faced with a challenge of slicing of vegetables for immediate consumption. This stems from the fact that the traditional slicing methods use bare hands, and knives. This method is faced with shortcomings of inefficiency, poor hygiene, and significant dangers to injury. If vegetables are not sliced, their drying takes longer, may possibly be spoiled, and cannot be stored for future uses. Therefore, this paper strives to design a vegetable slicing machine to increase the efficiency of the drying process as a post-processing step. The study employed a Pugh’s design model to design the machine and manufacture it. …

Method For Solving The Kinematics Inverse Problem For Moving Along A Trajectory Objects (As An Example Of Assembly Industrial Robots), Oripjon Olimovich Zaripov, Dildora Usmonovna Sevinova

Chemical Technology, Control and Management

The task of performing a technological operation in kinematic calculation of industrial robots and determining various kinematic parameters describing the efficiency of robots is solved. Among them, one of the urgent problems based on the analysis of the entire kinematics of the assembly industrial robot is the problem of solving the inverse problem of the kinematics of the manipulator positions, that is, the problem of determining the relative parameters that change the coordinates of the gripper according to the given position. The article presents a scheme that allows solving the inverse kinematics problem of an industrial robot manipulator moving in …

Modeling Of The Process Of Measuring Conversion Of The Flow Of Liquid And Gaseous Media By The Method Of Variable Pressure Drop, Shukhrat Manapovich Gulyamov, Elbek Elmirza O'G'Li Ortiqov

Chemical Technology, Control and Management

On the basis of material and heat balances, taking into account the initial and boundary conditions, a mathematical model of the process of measuring the transformation of liquid and gaseous technological media by the method of variable pressure drop is constructed. The analysis of the results of studying the influence of non-stationary flows of a controlled medium on the uncertainty of the results of measuring the flow rate of liquids and gaseous mixtures with a changing hydrodynamic structure of the flow of a controlled medium is performed. A comparative analysis of the calculated and experimental transient processes in the measuring …

Algorithmic Methods For Developing The Structure Of A Thyristor Electric Drive For Mining Machines, N.R Yusupbekov, O.A. Jumaev, S.S. Turaev

Chemical Technology, Control and Management

The article discusses the creation of algorithmic structures and the development of digital control systems for electric drives of mine-lifting machines, provides some concepts for creating digital control systems using thyristor converters. The analysis of the static volt-ampere characteristics of the thyristor is given, some calculations of the circuits and circuits of the thyristor converter (TP) corresponding to the different modes of operation of the TP are given, and also, based on the synthesis of the dynamic properties and characteristics of the thyristor, an algorithmic structure of the model of the thyristor converter is proposed.

Structural Model Of The Technological Process Of Storage And Processing Of Oil Raw Materials, N.A Kabulov

Chemical Technology, Control and Management

The technological method of storing and processing oilseed raw materials is structurally modelled in the article. Additionally, it is suggested that the generalized structure be presented as a three-part scheme, consisting of a raw material department, a processing shop, and transportation networks. On the basis of a thorough examination of the characteristics of the constituent parts of the technological complex, a practical model for the problem of the general characteristics of the technological complex is proposed.

Virtual Potassium Chloride Analyzer In The System Of Advanced Control Of Potash Fertilizer Production Processes, Umidjon Ruziev, Jahongir Sherboyevich Bekqulov

Chemical Technology, Control and Management

It is proposed to include virtual instrumental quality analyzers of potash fertilizers in the composition of the advanced (advanced) management system. The structure of the virtual analyzer is substantiated using mathematical models of the technological process of drying potassium chloride in its composition. Based on the results of fuzzy clustering, the parameters of the modes of the technological process of drying potassium chloride are determined.

Preface To Special Issue On Electrocatalysis And Electrosynthesis, Fang-Yi Cheng, Shuang-Yin Wang, Tian-Hua Zhou

Journal of Electrochemistry

No abstract provided.

Highly Dispersed Pt Nanoparticles Root In Single-Atom Fe Sites In Ldhs Toward Efficient Methanol Oxidation, Qing-Cheng Meng, Lin-Bo Jin, Meng-Ze Ma, Xue-Qing Gao, Ai-Bing Chen, Dao-Jin Zhou, Xiao-Ming Sun

Journal of Electrochemistry

Active and durable electrocatalysts for methanol oxidation reaction are of critical importance to the commercial viability of direct methanol fuel cell, which has already attracted growing popularities. However, current methanol oxidation electrocatalysts fall far short of expectations and suffer from excessive use of noble metal, mediocre activity, and rapid decay. Here we report the Pt anchored on NiFe-LDHs surface hybrid for stable methanol oxidation in alkaline media. Based on the high intrinsic methanol oxidation activity of Pt nanoparticles, the substrates NiFe-LDHs further enhanced anti-poisoning ability and maintained unaffected stability after 200,000 s cycle test compared to commercial Pt/C catalyst. The …

Design And Performance Analysis Of Dry Gas Fishbone Wells For Lower Carbon Footprint, Habib Ouadi, Aimen Laalam, Amjed Hassan, Abderraouf Chemmakh, Vamegh Rasouli, Mohamed Mahmoud

Petroleum Engineering Student Publications

Multilateral well drilling technology has recently assisted the drilling industry in improving borehole contact area and reducing operation time, while maintaining a competitive cost. The most advanced multilateral well drilling method is Fishbone drilling (FbD). This method has been utilized in several hydrocarbon fields worldwide, resulting in high recovery enhancement and reduced carbon emissions from drilling. FbD involves drilling several branches from laterals and can be considered as an alternative method to hydraulic fracturing to increase the stimulated reservoir volume. However, the expected productivity of applying a Fishbone well from one field to another can vary due to various challenges …

Sootlib: A Soot Model Library For Combustion Simulation, Victoria B. Stephens, Joshua Bedwell, Alex J. Josephson, Keturah Oldham, David O. Lignell

Faculty Publications

Soot formation in combustion is an important process that affects radiative heat transfer, flame temperatures, and emissions with health and environmental impacts. Soot formation involves complex chemistry for nucleation, growth, oxidation, and coagulation processes. The soot particles vary widely in size and accurate modeling requires representation of the particle size distribution (PSD). Modeling soot is not trivial, and is only one of several physical processes active in combustion systems. This paper presents a software package called SootLib, which is an open-source library for modeling soot formation and other aerosol systems. SootLib is written in C++, is documented with Doxygen, and …

Hybrid Modeling For Electrochemical Systems, Luis Alejandro Briceno-Mena

LSU Doctoral Dissertations

The discovery of new materials like catalysts, polymeric films, and biomolecules, is driven by industrial needs such as improving reaction or separation selectivity, enhancing therapeutic effects on medical treatments, or reducing costs of replacement. However, deployment of these advances in industrial applications is often hindered by the lack of models needed for design and optimization. Due to the novelty of materials and devices, experimental data and first principles' knowledge are scarce, making it hard to build models either via data-driven or knowledge based approaches. In this context, a way to efficiently combine domain knowledge with data could provide a pathway …

Development Of A Slow-Degrading Polymerized Curcumin Coating For Intracortical Microelectrodes, Alexis M. Ziemba, Mary Clare Crochiere Woodson, Jessica L. Funnell, Douglas Wich, Bailey Balouch, Deniz Rende, Dahlia N. Amato, Jonathan Bao, Ingrid Oprea, Dominica Cao, Neda Bajalo, Evon S. Ereifej, Jeffrey R. Capadona, Edmund F. Palermo, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Intracortical microelectrodes are used with brain-computer interfaces to restore lost limb function following nervous system injury. While promising, recording ability of intracortical microelectrodes diminishes over time due, in part, to neuroinflammation. As curcumin has demonstrated neuroprotection through anti-inflammatory activity, we fabricated a 300 nm-thick intracortical microelectrode coating consisting of a polyurethane copolymer of curcumin and polyethylene glycol (PEG), denoted as poly (curcumin-PEG1000 carbamate) (PCPC). The uniform PCPC coating reduced silicon wafer hardness by two orders of magnitude and readily absorbed water within minutes, demonstrating that the coating is soft and hydrophilic in nature. Using an in vitro release model, curcumin …

Modelling And Optimization For An Operating Giant Gas Plant In Egypt, Nessren Farrag, Mohamed Shebl, Mai Fouad, Abdulaziz Abdulaziz

Chemical Engineering

An Egyptian gas-producing plant located in the north of Egypt on the coast of the Mediterranean Sea near Port Said city is designed mainly to receive and treat natural gas produced from offshore wells. The plant designed capacity is around 2800 million standard cubic feet per day (MMSCFD), which gives it a highly appreciated strategic importance. The primary plant process is removing H2S associated with the produced gas using amine solutions. The plant contains seven units called gas trains, which use packed columns for the removal. An additional acid gas removal unit was involved in the early production facility, which …