Engineering Commons^™

Analysis And Mitigation Of Cyber-Attacks Targeting Infrastructures Operated By Iot Systems, Raja Salih Mohammed Hasan, Nadia Mahmood Ali, Ihsan Jabbar Hasan

Al-Esraa University College Journal for Engineering Sciences

Numerous countries have a high impact on providing the planet with critical infrastructures offering very important services employed in different fields such as water resources management, public services, power grids, telecoms, commercials, and transportation. The increasing solutions in IoT systems made it possible to exploit internet connection services for supporting the critical infrastructures. The latest are being targeted by various types of cyber-attacks due to the advancement in internet services. Therefore, improving the security systems and the ways to detect the threats is highly required. Meanwhile, protecting the critical infrastructures from hostile cyber-attacks is of high significance. This article examines …

Reliability Assessment Model Of Network Operating System Based On Convolution Neural Network, Jamal N. Hasoon, Sarah S. Qasim, Mohammed A. Alshomali, Jane J. Stephan

Al-Esraa University College Journal for Engineering Sciences

The paper's subject is one of the points of fundamental significance in improving the development of complex computer systems is the effect of errors since their probability of occurrence in a widely distributed system is exceptionally high. Thus, the computer system must be dependable and provide comprehensive support for fault tolerance, fault detection, signal recovery mechanisms, failure prediction, etc. The goal is to develop a way to evaluate the reliability of the Red Hat Linux operating system utilizing data sets of system failures obtained from system injection with error reports using the Fault Injection Benchmarking and Reliability) FIBR( (for a …

Investing Traditional Architecture That Fulfills The Supreme Human Needs With Its Spiritual Dimension In Reconstruction / The Architecture Of Old Mosul City, A Case Study, Sinan Mohammad Talee Al-Saffar, Anwar Subhi Ramdan Al - Qaraghuli

Al-Esraa University College Journal for Engineering Sciences

Architecture has sought since time immemorial to meet multiple human needs, starting from the basic physiological needs for human survival, psychological needs (social and individual) to needs related to human progress, such as taking into account the aesthetic and spiritual aspects, which represent the highest levels of those needs, through a set of design aspects and characteristics. This research is based on the study of the spiritual dimension of higher human needs in general that architecture seeks to meet, by studying that in the architecture of traditional cities, in particular, to enhance architectural knowledge with regard to the importance of …

The Role Of Algorithms In Formulating The Architectural Formation, Ghada Ghalib Abdul Wahab, Younis Mahmood M. Salem

Al-Esraa University College Journal for Engineering Sciences

Algorithms are mathematical processes that provide step-by-step instructions for solving a specific problem. They are commonly used in computer science and other technical fields to automate processes and solve complex problems. One great application of algorithms is the generation of shapes. Algorithms can be used to create complex shapes and patterns that are difficult or impossible to create manually. We will explore how algorithms can be used as a mechanism to generate shapes by adopting the Voronoi algorithm because it provides a wide environment for creativity through new intellectual processes that may not occur at all in the human mind …

The Detection Of Android Malwares Using The Features Selection Technique, Farah Rafid Salman, Amer Abdulmajeed Abdulrahman

Al-Esraa University College Journal for Engineering Sciences

The use of Android smartphones has been rising quickly as Internet-based services gain more popularity and develop. The Android operating system's enormous popularity has drawn malware attacks on these devices. It is difficult and ineffective to detect malware versions with features that modify their behavior in order to avoid detection by machine learning (ML) techniques. Effective feature selection plays a crucial role in detecting malware characteristics and reduces the dimensionality of a large dataset by removing unnecessary features that are not useful and keeping those relevant features that increase classification accuracy and detection rate. This helps to solve the problems …

A Review Of Polymer – Particles Composite Materials, Ismail Ibrahim Marhoon, Ayad Abbood Abdul Al-Hassan, Mohammed Ali Abdulrehman

Al-Esraa University College Journal for Engineering Sciences

In several engineering applications traditional materials are replacedby composite materials. Filled composite materials consist of the continuousmatrix and the filling particles. The primary purpose of introducing inorganicsolid particles into polymers is to essentially increase mechanical and physicalproperties. The wear properties of polymer composite can be changed to agreater degree by modifying the process of preparing the filled compositematerials. In the present review, a large-scale research has been conductedon the effect of wear on the composites of polymers. The effect of filler onthe polymer composites wear behavior has been thoroughly explained

Ability Of Replacing The Steel Strands By Cfrp In Pre-Stressed Concrete Girders: Art Review, Ahmed Salim Edan, Wael Shawky Abdulsahib

Al-Esraa University College Journal for Engineering Sciences

Fiber-reinforced polymer (FRP) composites are the modern,trustworthy alternatives to steel tendons and rebars. The bulk of currentresearch is devoted to establishing the feasibility of incorporating carbonfibre-reinforced polymer (CFRP) into reinforced concrete girders byevaluating the strength and reliability of CFRP and concrete components.In order to improve fatigue and corrosion resistance, CFRPs are crucial.Comparing reinforced prestressed concrete bridge girders strengthenedwith conventional steel reinforcement to those reinforced with CFRPs offersthe possibility of greatly increasing service life. Also widely researchedand used in bridge engineering as a corrosion-resistant substitute for steelreinforcement is CFRP composite material. The use of carbon fiber-reinforcedplastic (CFRP) reinforcement for prestressing concrete …

A Review Article On The Performance Based Seismic Design Of Structures, Reem Hatem Ahmed, Sahar Elaiwi, Shelan Hameed Ameen

Al-Esraa University College Journal for Engineering Sciences

For the most part, seismic design builds complex structural systems using the same small number of essential structural components as non-seismic design projects. Based on the building regulations, structures are frequently designed to "withstand" the largest earthquake with a given likelihood that is projected to happen at their location. This means that by avoiding structures from collapsing, the number of fatalities must be maintained to a minimal. Seismic design involves knowing the many failure modes regarding a structure and giving it the right stiffness, strength, ductility, and layout for ensuring that these modes do not take place. In this essay, …

Corrosion Case Study On Pipeline, Kangze Ren

Corrosion Research

The Kashagan pipeline leaks were likely caused by sulfur stress corrosion cracking, a combined corrosion mechanism developed by the presence of high pressure, the high level of hydrogen sulfide(the main "ingredient" of sour gas), and poor metallurgical choice. Improper welding and poor metallurgical examination were blamed for causing the leaking issue. The purpose of the current review is to raise the alarm about the inappropriate corrosion management of Kashagan oil production and its societal and environmental consequences.

Impact Of Thermal Maturation Of The Upper Cretaceous Bituminous Limestone Of Attarat Um Ghudran Central Jordan On Calcareous Nannofossil Preservation, Mohammad Alqudah, Mohammad Al Alaween, Adam Fermor, Ezaldeen Ali, Thomas Wagner, Mohammed Hail Alhakimi, Afikah Rahim

All Works

Oil shale deposits of the Late Cretaceous from three boreholes in central Jordan were examined to assess the impact of thermal maturation on the content of nannofossils. Thermal activity has been shown to have a strong effect on organic matter content and composition but its effect on calcareous nannofossil assemblages remains inconclusive. This study aims to determine the impact of thermal maturation on nannofossil assemblages and to compare this to an estimated maturity level based on bulk geochemical analysis. Micropaleontological and geochemical analyses were conducted on 31 samples from three oil shale wells drilled in Attarat Um Ghudran central Jordan. …

Coexistence Of Specialist And Generalist Species Within Mixed Plastic Derivative-Utilizing Microbial Communities, Laura G. Schaerer, Lindsay I. Putman, Isaac Bigcraft, Emma Byrne, Daniel G. Kulas, Ali Zolghadr, Sulihat Aloba, Rebecca Ong, David Shonnard, Stephen Techtmann

Michigan Tech Publications

BACKGROUND Plastic-degrading microbial isolates offer great potential to degrade, transform, and upcycle plastic waste. Tandem chemical and biological processing of plastic wastes has been shown to substantially increase the rates of plastic degradation however, the focus of this work has been almost entirely on microbial isolates (either bioengineered or naturally occurring). We propose that a microbial community has even greater potential for plastic upcycling. A microbial community has greater metabolic diversity to process mixed plastic waste streams and has built-in functional redundancy for optimal resilience. RESULTS Here, we used two plastic-derivative degrading communities as a model system to investigate the …

Neutronic Analysis Of The Byu Molten Salt Micro Reactor, Collin Bradford, Edward Mercado, Braden Clayton, Lagrande Gunnell, Andrew Larsen, Matthew Memmott

Faculty Publications

Background: With the rising need for reliable and clean energy, researchers at Brigham Young University created a molten salt microreactor (MSMR) concept to help meet the world’s growing energy demands. The MSMR is rated at 45 MWth and is uniquely capable of passively dissipating all decay heat using conduction only.

Methods: This work presents the results of the simulated neutronic behavior of the MSMR using the Monte Carlo neutronics code OpenMC with the ENDF/B-VII.1 cross-section library at steady state conditions. The specific characteristics discussed in this work are: keff, power profile, axial and radial peak power factors, Doppler coefficient of …

Exploration Of Corona Charge As A Novel In Vitro Human T Cell Dna Transfection Method, Molly A. Skinner

USF Tampa Graduate Theses and Dissertations

With gene-based immunotherapies on the rise to treat a multitude of diseases, the ability to genetically modify cells in a rapid and efficient fashion is necessary to keep up with demand. Gene electrotransfer (gene transfer by electroporation) is an appealing transfection method due to its low cost, high efficiency compared to other physical forms of gene delivery, and low toxicity compared to liposomal or viral vectors.

Traditional gene delivery via electroporation is done within a cuvette where the cell suspension is placed between two plate electrodes. This method requires cells to be moved from the treatment cuvette to a growth …

Strategic Optimization Of The Flushing Operations In Lubricant Manufacturing And Packaging Facilities, Swapana Jerpoth, Robert Hesketh, C. Stewart Slater, Mariano Savelski, Kirti Maheshkumar Yenkie

Henry M. Rowan College of Engineering Departmental Research

Commercial lubricant industries use a complex pipeline network for the sequential processing of thousands of unique products annually. Flushing is conducted between changeovers to ensure the integrity of each production batch. An upcoming product is used for cleaning the residues of the previous batch, resulting in the formation of a commingled/mixed oil that does not match the specifications of either of the two batches. The existing operations are based on the operator’s experience and trial and error. After a selected flush time, the samples are tested for their viscosity to determine the success of a flush. The approach results in …

Evolution Of Glassy Carbon Derived From Pyrolysis Of Furan Resin, Josh Kemppainen, Ivan Gallegos, Aaron Krieg, Jacob R. Gissinger, Kristopher E. Wise, Margaret Kowalik, Julia A. King, S. Gowtham, Adri Van Duin, Gregory Odegard

Michigan Tech Publications

Glassy carbon (GC) material derived from pyrolyzed furan resin was modeled by using reactive molecular dynamics (MD) simulations. The MD polymerization simulation protocols to cure the furan resin precursor material are validated via comparison of the predicted density and Young's modulus with experimental values. The MD pyrolysis simulations protocols to pyrolyze the furan resin precursor is validated by comparison of calculated density, Young's modulus, carbon content, sp carbon content, the in-plane crystallite size, out-of-plane crystallite stacking height, and interplanar crystallite spacing with experimental results from the literature for furan resin derived GC. The modeling methodology established in this work can …

Mantle Flow Underneath The South China Sea Revealed By Seismic Anisotropy, Fansheng Kong, Rui Gao, Stephen S. Gao, Kelly H. Liu, Weiwei Ding, Xiongwei Niu, Aiguo Ruan, Pingchuan Tan, Jianke Fan, Shaoping Lu, Zhengyi Tong, Liqun Cheng, Wenfei Gong, Yanghui Zhao

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

It Has Long Been Established that Plastic Flow in the Asthenosphere Interacts Constantly with the overlying Lithosphere and Plays a Pivotal Role in Controlling the Occurrence of Geohazards Such as Earthquakes and Volcanic Eruptions. Unfortunately, Accurately Characterizing the Direction and Lateral Extents of the Mantle Flow Field is Notoriously Difficult, Especially in Oceanic Areas Where Deployment of Ocean Bottom Seismometers (OBSs) is Expensive and Thus Rare. in This Study, by Applying Shear Wave Splitting Analyses to a Dataset Recorded by an OBS Array that We Deployed between Mid-2019 and Mid-2020 in the South China Sea (SCS), We Show that the …

Soil Adsorption Of Heavy Metals To Protect Groundwater Near Refinery Wastewater Discharge Points, Hamid A. Al-Falahi, Ferdous A. Jabir, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study presents a strategy to manage the discharge of wastewater, which is either partially treated or untreated, to safeguard the groundwater reserves in the region. a case study involving Ad Diwaniyah refinery wastewater disposal into an adjacent desert was utilized to evaluate the influence of soil adsorption on the attenuation of Pb, Cu, and Cd ion concentrations. Investigation of competitive adsorption of heavy metal ions (Pb2+, Cu2+, and Cd2+) in Dolomite-Limestone soil was conducted through batch and column methods. the adsorption behavior of the bivalent metal cations was observed to be pH dependent. However, the competitive extraction of the …

Cellulose Materials For Drug Delivery Applications, Reham Mohamed

Mechanical Engineering Theses

Non-healing wounds are a growing global public health concern due to inadequate or ineffective therapeutic products available. Cellulose-based biopolymers are attractive wound dressing materials due to their biocompatibility, biodegradability, non-toxicity, and cost-effectiveness. This study aims to design and fabricate solid dosage formulations using carboxymethyl cellulose (CMC) and ethyl cellulose (EC) to facilitate multi-stage releases of phenytoin (PHT) and tetracycline hydrochloride (TCH) from plain carriers, fibers/films composites, and layer-by-layer fiber composites. Results from in vitro drug release assays demonstrated a time-dependent release up to 8 hours from PHT-loaded EC fibers, while TCH-loaded CMC films exhibited a rapid release within 5 minutes. …

Enhancing Heat Transfer Performance In Simulated Fischer–Tropsch Fluidized Bed Reactor Through Tubes Ends Modifications, Laith S. Sabri, Abbas J. Sultan, Jamal M. Ali, Hasan Shakir Majdi, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Fluidized bed reactors are essential in a wide range of industrial applications, encompassing processes such as Fischer–Tropsch synthesis and catalytic cracking. The optimization of performance and reduction in energy consumption in these reactors necessitate the use of efficient heat transfer mechanisms. The present work examines the considerable impact of tube end geometries, superficial gas velocity, and radial position on heat transfer coefficients within fluidized bed reactors. It was found that the tapered tube end configurations have been empirically proven to improve energy efficiency in fluidized bed reactors significantly. For example, at a superficial gas velocity of 0.4 m/s, the tapered …

Catalytic Hydrogenation Of Dimethyl Oxalate To Ethylene Glycol Using Silver Based Catalysts On Sba-15, Nicolas Edouard Gleason-Boure

Theses and Dissertations

Ethylene glycol (EG) is an important industrial chemical in the manufacturing of certain plastics. There is growing industrial interest in the production of dimethyl oxalate (DMO) from syngas, which can be hydrogenated to produce EG. Many studies have focused on the catalytic reduction of DMO using copper-based catalysts on silica supports, but fewer studies have been done on the effects of silver for this reaction. This work presents an in-depth study of silver catalysts prepared via various methods including incipient wetness impregnation, charge enhanced dry impregnation, and the use of various organic solvents. Reaction studies show that using pure methanol …

Investigating Ph And Other Electrical Properties Of Potassium Salt Solutions, Li Shu, Xi Lu, Veeriah Jegatheesan, Leonardo Jegatheesan

Research outputs 2022 to 2026

A recent study of ours reported that pH of common salts varies with concentration at room temperature. It can either increase in case of basic salts or decrease in case of acidic salts. In this study, pH values of four kind of potassium salts were investigated and their pH values increased with salt concentrations. It was reasoned that the concentration of hydrogen ions equalled the concentration of positive charges/protons in a solution, so a relationship between the activity of hydrogen ions and charge activity was developed. Further, the well-established equations for pH with hydrogen-ion activity and electrostatic/cell potential were extended …

Heterogeneous Catalyst Design For Biomass Conversion, Dia Sahsah

Theses and Dissertations

Catalytic upgrading of bio-based feedstocks to commodity chemicals and fuels is pivotal to a more sustainable, renewable, and environmentally benign chemical economy. However, due to the high oxygen content, high water solubility, excessive reactivity, and thermal instability, typical and well-developed catalytic material and reactor processes reliably utilized in conventional petrochemical industry are, in general, not suitable for the processing of biomass feedstocks. Therefore, the development of novel heterogeneous catalysts is necessary in order to design new high-performance catalytic reactor systems. However, rational catalyst design is a multifaceted problem, and a myriad of factors influencing the catalytic performance at the reactor …

Structure Property Performance Of Ti3c2 Mxene/Polyelectrolyte Hybrids For Electronic And Electromagnetic Applications, Farivash Gholamirad

Theses and Dissertations

Hybrid materials based on transition metal carbide MXene (Ti3C2Tx) nanosheets have great potential for electronic, electromagnetic interference (EMI) shielding, and environmental applications due to the unique combination of considerable electrical conductivity of 4000 to 15000 S.cm-1, abundant surface functional groups (OH, O, F, Cl), and suitable mechanical properties. However, the performance of final products depends not only on the properties of constituent components but also on the morphology of the assembly. The strong repulsive electrical double layer forces among MXene nanosheets make control over their assembly morphology and final properties challenging. To address this challenge, this dissertation focuses on applying …

Influence Of Metal-Coordinating Comonomers On The Coordination Structure And Binding In Magnetic Poly(Ionic Liquid)S, Kayla Foley, Lucas Condes, Keisha B. Walters

Chemical Engineering Faculty Publications and Presentations

A poly(ionic liquid) (PIL), poly(acrylamide-co-diallyl dimethylammonium chloride), was systematically complexed with Co²⁺, Fe³⁺, and Co²⁺/Fe³⁺ (mixed) at different molar equivalencies to form a series of magnetic PILs (MPILs). These novel MPILs were utilized to examine molecular structure and binding between the polymer and metal species using comprehensive spectroscopic studies in both dry and liquid states. FTIR, X-ray photoelectron, UV-vis, and Raman spectroscopies showed evidence of metal coordination of both the iron and cobalt chloride species with the acrylamide comonomer. Using AC susceptibility measurements, the MPILs were found to have magnetic properties …

Insights Into Supported Metal Catalyst Sintering And Their Application For Bio-Oil And Crude Oil Upgradation, Md Fakhruddin Patwary

Theses and Dissertations

Typical heterogeneous catalysts consist of transition metal nanoparticles anchored against sintering on an inert, porous, high temperature stable support. The synthesis of supported catalyst involves pretreatment (drying, reduction) of deposited, ionic metal precursor complexes to form metal nanoparticles. In the first part of this work, we aim to understand the influence of pretreatment (reduction temperature, heating rate, moisture content) on final particle size. Supported nanoparticles of Pt and Pd were synthesized by strong electrostatic adsorption (SEA) and dry impregnation (DI). Reduced samples were characterized by in-situ and ex-situ XRD and STEM. The DI-derived samples generally showed an expected increase of …

Polybenzimidazole Membranes For Electrochemical Applications With Harsh Operating Conditions, Kris Likit-Anurak

Theses and Dissertations

Polybenzimidazole (PBI) membranes are high temperature proton exchange membranes (PEMs) which have advantages such as being able to operate in high temperatures, strong acid environments, and have no need for external humidity during operation. PBI membranes have been demonstrated to work effectively in multiple electrochemical devices, including fuel cells, hydrogen separation pumps, redox flow batteries, and a hybrid sulfur electrolyzer. In this work, para-PBI and densified para-PBI membrane have been used to improve electrochemical performance in harsh operating conditions that are both high temperature (≥120 ̊C) and high acid concentration (≥ 5M). First, we demonstrated the use of para-PBI membranes …

Understanding The Corrosion And Discharge Behaviour Of Zinc Anodes In Primary Alkaline Batteries, Brian James Lenhart

Theses and Dissertations

Primary zinc alkaline batteries power a wide array of everyday use electronic devices such as remote controls, calculators, cameras, and flashlights and will own an appreciable share of the battery market for the foreseeable future. Primary alkaline batteries generally utilize carbon, gas diffusion air, or manganese dioxide cathode but always coupled with a slurry zinc anode. There are several issues with this primary alkaline platform, largely emphasized by the performance of the zinc anode, such as a gassing phenomenon which leads to battery rupture and under certain circumstances, low material utilization leading to low energy density. The gassing and material …

Engineering Hybrid Colloidal Systems Formed By Charge-Driven Assembly Between Spherical Soft Nanoparticles And Discotic Nanoplatelets, Gelareh Rezvan

Theses and Dissertations

Soft matter, a fascinating class of materials, holds a paramount significance in the realm of material design and engineering. Within this broad category, colloidal gels with their unique characteristics have drawn tremendous attention in a variety of applications, spanning from biomedical engineering to oil and gas recovery. Meeting the specific requirements and criteria of these diverse fields necessitates the development of colloidal gels with highly tunable properties to optimize their performance for a wide range of applications. Hence, both scientific and industrial advancement call for more control over the gel properties by exploring novel practical parameters. This dissertation describes an …

Enhanced Cell Viability And Migration Of Primary Bovine Annular Fibrosus Fibroblast-Like Cells Induced By Microsecond Pulsed Electric Field Exposure, Prince M. Atsu, Connor Mowen, Gary L. Thompson Iii

Henry M. Rowan College of Engineering Departmental Research

This study is the first to report the enhancement of cell migration and proliferation induced by in vitro microsecond pulsed electric field (μsPEF) exposure of primary bovine annulus fibrosus (AF) fibroblast-like cells. AF primary cells isolated from fresh bovine intervertebral disks (IVDs) are exposed to 10 and 100 μsPEFs with different numbers of pulses and applied electric field strengths. The results indicate that 10 μs-duration pulses induce reversible electroporation, while 100 μs pulses induce irreversible electroporation of the cells. Additionally, μsPEF exposure increased AF cell proliferation up to 150% while increasing the average migration speed by 0.08 μm/min over 24 …

Stress-Dependent Petrophysical Properties Of The Bakken Unconventional Petroleum System: Insights From Elastic Wave Velocities And Permeability Measurements, Prasad Pothana, Ghoulem Ifrene, Kegang Ling

Petroleum Engineering Student Publications

The net-effective stress is a fundamental physical property that undergoes dynamic changes in response to variations in pore pressure during production and injection activities. Petrophysical properties, including porosity, permeability, and wave velocities, play a critical role and exhibit strong dependence on the mechanical stress state of the formation. The Williston basin’s Bakken Formation represents a significant reservoir of hydrocarbons within the United States. To investigate this formation, we extracted core plugs from three distinct Bakken members, namely Upper Bakken, Middle Bakken, and Lower Bakken. Subsequently, we conducted a series of measurements of ultrasonic compressional and shear wave velocities, as well …