Engineering Commons^™

Enabling High-Rate Thermoplastic Composite Manufacturing Through Structure-Processing-Property Relationships Of Polyphenylene Sulfide, Lina Ghanbari

Dissertations

In this dissertation, relationships between polyphenylene sulfide (PPS) chain structure and melt processing parameters are linked to thermoplastic composite (TPC) properties and mechanical performance. Deviations from linear PPS structure and the formation of branching/crosslinked moieties upon exposure to TPC manufacturing steps presents an opportunity to systematically uncover the interdependencies of melt-state thermal history on polymer rheology, crystallization, crystal structure, and translate these properties to the continuum level. This work first explores unreinforced PPS and how the formation of non-linear chain architectures yield altered rheological states when held at melt processing temperatures. These hindered chains exhibit unconventional crystallization behavior and non-uniform …

An Assessment Of Methane Cracking Technologies For Hydrogen Production And Reduction Of Greenhouse Gases, Alisa E. Pjetrovic

2024 Spring Honors Capstone Projects - Archive

Methane reformation and methane pyrolysis involve separating, or cracking, the components of methane, leading to the production of hydrogen gas, and in the case of pyrolysis, solid carbon. Because methane is known as a leading cause of climate change, these technologies are gaining attention as the global community moves to address methane as a greenhouse gas. This study aims to assess, through a systematic literature review, the current state-of-the-art methane cracking technologies based on seven technology criteria: hydrogen production capability, environmental impact, value of carbon produced, reaction stability, operating temperature requirements, energy requirements, and Technology Readiness Level (TRL). This study …

A Computational Investigation Into Thermo-Kinetic Parameters Governing The Decomposition Of Bio-Oil Model Compounds, Ali Huseein Aljefri

Theses

Among notable products from thermal degradation of biomass are simple oxygen-containing aromatics. These compounds typically appear in high loads in collected bio-oil derived from biomass. As such, it is important to comprehend the decomposition chemistry of this category of compounds. This thesis takes on board a general approach to report thermo-kinetic parameters that govern decomposition of a selected set of bio-oil model compounds in two distinct systems: firstly radical-derived pathways in the gas phase and secondly thermal degradation in their condensed media. The first is attained through accurate density functional calculations while the second is accomplished through the use of …

L-Ergothioneine Slows The Progression Of Age-Related Hearing Loss In Cba/Caj Mice, Mark A. Bauer, Parveen Bazard, Alejandro A. Acosta, Nidhi Bangalore, Lina Elessaway, Mark Thivierge, Moksheta Chellani, Xiaoxia Zhu, Bo Ding, Joseph P. Walton, Robert D. Frisina

Chemical and Biochemical Engineering Faculty Research & Creative Works

The naturally occurring amino acid, l-ergothioneine (EGT), has immense potential as a therapeutic, having shown promise in the treatment of other disease models, including neurological disorders. EGT is naturally uptake into cells via its specific receptor, OCTN1, to be utilized by cells as an antioxidant and anti-inflammatory. In our current study, EGT was administered over a period of 6 months to 25–26-month-old CBA/CaJ mice as a possible treatment for age-related hearing loss (ARHL), since presbycusis has been linked to higher levels of cochlear oxidative stress, apoptosis, and chronic inflammation. Results from the current study indicate that EGT can prevent aging …

Elucidating The Impact Of Casting Solvent On Vanadium Ion Transport In Solution-Cast Ionomer Biocomposites Containing Lignin, Zhongyu Wang

All Theses

This paper attempts to investigate the influence of solvent choice to the Nafion-lignin proton exchange membranes that used in the vanadium redox flow batteries. The influence of two different solvents: DMF and DMSO were investigated in this paper. Results show that when using DMSO as solvent, Nafion-lignin membranes' vanadium ion cross over can be greatly reduced in comparing with membranes prepared from DMF. Also, membranes prepared from DMSO also show higher water uptake ability and lower ion exchange capacity than the membranes prepared from DMF. This paper has also investigated the influence of lignin type to the membranes. Results show …

Computational Predictions Of Heart Failure Drug Effects On Cardiac Fibrosis, Aaron Gardner

Chemical Engineering Undergraduate Honors Theses

The extracellular matrix is a complex system surrounding cells that is crucial to all of the cardiovascular system’s functions. Fibrosis is an excessive accumulation (scarring) of the extracellular matrix. Fibrosis is typically a negative event, and the scarring must be reduced in the heart in order to maintain its functionality. Due to this, simulations are run using the software “Netflux” in order to determine the effects of different heart failure drugs on cardiac fibrosis. The drugs that were simulated were an ACE Inhibitor, BAR Beta Blocker, ARB Blocker, and Entresto. These drugs were simulated over 50 hours at three different …

Optimization Of Collagen And Cell Concentrations For Engineered Tissues, Avery Fiser

Chemical Engineering Undergraduate Honors Theses

Improvements regarding the drug discovery process are necessary due to less than 1% of drugs making it from the initial discovery phase to patient treatment in clinics. One method of enhancing this process involves improving the relevance and dependability of in vitro testbeds utilized during pre-clinical testing. Improvement along these factors can provide a more relevant view for eventual drug behavior in patients. This additional relevance can allow for a reduced timeline in drug development for improving patient care. A consistent and morphologically sound baseline engineered tissue is vital to the creation of successful experimental models. Parameters such as cell …

Characterization Of Tunable And Responsive Functionalized Cellulose Nanofiber (Cnf) Gels With Applications As A 3d Bioprinting Ink, Charles Joseph Jouaneh

Senior Honors Projects

No abstract provided.

Sulfonated Lignin-Based Ionomer Biocomposite Membranes For Redox Flow Batteries, Aiswarya Mechoor

All Theses

The current benchmark membrane for vanadium redox flow batteries (VRFBs), Nafion™, accounts for up to 40% of the cost of the battery and suffers from poor ion selectivity, leading to diminished battery performance. Consequently, alternative ionomer membranes, such as sulfonated poly(ether ether ketone) (SPEEK), have recently garnered attention due to their lower cost and similar performance properties to Nafion. However, like Nafion, SPEEK also suffers from poor ion selectivity. In this study, we attempt to address the issue of poor ion selectivity by developing SPEEK–lignin composite membranes containing fractionated and functionalized lignin. Specifically, two lignin fractions – a low molecular …

Integrating Galectin-3 Into A Computational Model Of Cardiac Fibrosis Progression, Adam Pieratt

Chemical Engineering Undergraduate Honors Theses

Cardiac fibrosis, a large contributor to heart failure, is the excessive accumulation of extracellular matrix in response to stress or injury. There are no approved treatments for cardiac fibrosis, and targeting specific species involved creates complex problems for drug development, so a computational model of the cardiac fibroblast signaling network can be used to observe the interactions involved in the progression of cardiac fibrosis. In this paper, a new protein called galectin-3 is integrated into this existing model, and connections are established to expand the coverage of the network. The additions are described, simulated using Netflux biological system simulation software, …

Modeling Sex-Specific Changes In Myocardial Fibrosis, Grace Martin

Chemical Engineering Undergraduate Honors Theses

Heart disease the leading cause of death for both men and women in the United States. Cardiac fibrosis, or accumulation of extracellular matrix proteins in the heart, can occur after a heart attack and increase the risk for further complications. Current treatments for heart disease do not include extracellular matrix regulators, partly due to the complicated signaling network responsible for the production of these proteins. By using a computational model of the signaling network in cardia fibroblasts, the relationship between particular molecules and downstream extracellular matrix production can be examined.

Biological sex is an important factor for cardiac health and …

Biomass Derived Lignin Polymer Modification For Sustainable Chemical Engineering Applications, Samantha Glidewell, Keisha Walters

Chemical Engineering Undergraduate Honors Theses

Lignin is an abundant naturally occurring plant-based polymer that is branched, highly unsaturated, and rich in aliphatic and aromatic hydroxyl groups. Lignin is a significant byproduct of the wood pulp and paper industries; however, it has yet to be widely utilized in commercial applications due to its non-linear structure, broad range of molecular weights, hydrophobicity, high rigidity, and brittleness. Recent investigations into modifying lignin to broaden its potential uses have shown promising results. This thesis explores different modification techniques of the naturally occurring hardwood lignin polymer for specific applications in areas of water treatment and polyurethane (PU) production. The first …

Green Chemistry Design Of Epoxies From Biomass For Circular Economy, Kavya Ganesan

All Dissertations

The commercial epoxies market in automobiles has been growing mainly in terms of usage as automotive coatings and lightweight composite structures manufacturing. Most of these commercial epoxies are bisphenol-based. Bisphenol-based epoxies are a class of high-performance polymer materials that, when cured, yield thermosets with high mechanical, thermal and chemical resistance properties. Roughly, North America produces around 123 billion pounds of these epoxies which are used in various industrial applications like coatings, composites, structural parts, automotive, electronics, construction etc. These epoxies are mainly manufactured from bisphenol-A (BPA) and epichlorohydrin (EPH). These raw materials are sourced from fossil fuel resources and are …

Electrode Engineering For Enhanced Performance And Low-Cost Redox Flow Batteries, Abena Williams

All Dissertations

none

Smart Manufacturing Of Cement: From Lab-Scale Simulation And Testing To Industry-Scale Deployment., Juan David Tabares Tamayo

Electronic Theses and Dissertations

Cement kilns are controlled by experienced process operators who follow experience-based industry guidelines using data collected and fundamental knowledge. The manufacturing process, which is equipped with sensors and equipment, transfers data/information to the operators to aid standardized decision-making operations. In contrast, companies have used such data to develop and implement digital solutions for predictive control systems; in effect, FLSmidth and Rockwell Automation. However, despite the availability of automated control systems and investigation in automation for process monitoring and optimization, opportunities to radically optimize cement manufacturing are still abundant and in need of implementation. Therefore, this research developed simulation models and …

Cooperative And Bifunctional Adsorbent-Catalyst Materials For In-Situ Vocs Capture-Conversion, Sukanta K. Mondal, Peter Aina, Ali A. Rownaghi, Fateme Rezaei

Chemical and Biochemical Engineering Faculty Research & Creative Works

Volatile Organic Compounds (VOCs) Are Gases that Are Emitted into the Air from Products or Processes and Are Major Components of Air Pollution that Significantly Deteriorate Air Quality and Seriously Affect Human Health. Different Types of Metals, Metal Oxides, Mixed-Metal Oxides, Polymers, Activated Carbons, Zeolites, Metal-Organic Frameworks (MOFs) and Mixed-Matrixed Materials Have Been Developed and Used as Adsorbent or Catalyst for Diversified VOCs Detection, Removal, and Destruction. in This Comprehensive Review, We First Discuss the General Classification of VOCs Removal Materials and Processes and Outline the Historical Development of Bifunctional and Cooperative Adsorbent-Catalyst Materials for the Removal of VOCs from …

Future Of Process Safety: Insights, Approaches, And Potential Developments, Hossein Abedsoltan, Amirhesam Abedsoltan, Zeinab Zoghi

Chemical and Biochemical Engineering Faculty Research & Creative Works

This review explores the evolving landscape of process safety, emphasizing the integration of digitalization and advanced technologies. It assesses the role of the industrial Internet of Things, artificial intelligence, and machine learning (ML) in enhancing safety protocols. The paper examines predictive analytics, sensor technology advancements, and digital twins' contributions to safety optimization. It also discusses the future perspectives of risk management approaches, including proactive safety management systems, quantitative risk assessment techniques, and human reliability analysis. This comprehensive analysis provides insights into future developments and challenges in process safety.

Effects Of Ferrite And Graphite Phases On Scratch Characteristics Of Nodular Cast Iron, Zhitong Xu, Ming Liu, Chenghui Gao, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

In this work, we conduct micro-scratch tests of nodular cast iron with Vickers indenter under constant normal load and investigate the effects of individual phases (i.e., ferrite and graphite phases) on the scratch charac- teristics of nodular cast iron. Using a bimodal Gaussian model to fit the experimental data of penetration depth, residual depth, elastic recovery rate, and scratch hardness, we calculate the contribution percentages of indi- vidual phases to scratch variables. The scratch variables are independent of the scratch speed used in this work, while the penetration depth increases linearly with increasing the normal load. There exists a large …

A Mechanical Model For Stress Relaxation Of Polylactic Acid/Thermoplastic Polyurethane Blends, Yi-Sheng Jhao, Hao Ouyang, Chien-Chao Huang, Fuqian Yang, Sanboh Lee

Chemical and Materials Engineering Faculty Publications

Polylactic acid (PLA) is considered a promising biodegradable polymer alternative. Due to its high brittleness, composite materials made by melt blending thermoplastic polyurethane (TPU) with PLA can enhance the toughness of PLA. To understand the forced aging caused by stress relaxation in polymer materials, this study explains the stress relaxation experiments of PLA/TPU blends with different mass ratios under applied strain through mechanical model simulations. The Kelvin representation of the standard linear solid model (SLSM) is used to analyze the stress relaxation data of TPU/PLA blends, successfully explaining that the Young’s moduli (E1 and E2) of springs decrease with increasing …

Mechanical Property Simulations Of Ploybenzimidazole Membranes., Blake Alexander Clark

Electronic Theses and Dissertations

This work explores mechanical properties of membranes made of polybenzimidazole utilizing molecular simulations. These simulations researchers to narrow down polybenzimidazole membrane compositions to viable candidates. These simulations are quicker than current purely experimental methods. The increase in throughput would be achieved by eliminating compositions that have unfavorable mechanical properties through preliminary simulation work before moving onto experimental methods. Determining polybenzimidazole membranes’ mechanical properties experimentally would, therefore, allow for researchers to speed up research in areas such as fuel cells and electrolyzers that make use of polybenzimidazole membranes. This study uses Materials Studio and the COMPASS III forcefield to perform these …

Improving Static Cold Storage Life Of The Human Heart Before Transplant, Juan Sebastian Rodriguez Paez

Theses and Dissertations

Organ storage and transportation are critical steps for the success of organ transplantation. Static cold storage (SCS) of hearts for heart transplantation (HTx) remains the standard approach. However, SCS may involve damage to the tissue resulting from extended hypothermic preservation, potentially affecting organ viability. More over, the temperature distribution on and within the heart is unknown during heart transplantation. Therefore, there is an interest to study different stages of the heart transplantation process towards determining the 3D temperature distribution on and within the heart. There could be a possibility of having a hypothermic injury in different parts of the heart …

Sulfonated Ionomer Composite Membranes For Use In Vanadium Redox Flow Batteries, Xueting Wang

All Dissertations

While vanadium redox flow batteries (VRFBs) have garnered significant attention as a promising scalable energy storage technology, the current membrane material used in this technology, Nafion™, suffers from high cross mixing of vanadium ions in the liquid electrolytes, directly impacting battery performance properties such as the voltage and coulombic efficiencies, as well as resulting in a reduction in the overall battery lifetime. The use of ionomer nancomposites has proven to be one promising route of directly addressing the issue of high ion crossover, though the mechanism by which the nanoparticles act to reduce crossover remains in open question. Herein, the …

Synthesis Of Durable Zeolite 13x Insertion Coatings And Scaled-Up Experimental Demonstration For Co2 Capture, Daniel Jamil Hocheimy

Theses and Dissertations

Minimizing the energy requirement for capturing carbon dioxide (CO₂) from post-combustion sources is critical to efficient industrial decarbonization and subsequent mitigation of the effects of climate change. The current portfolio of CO₂ capture technologies includes absorption, membrane separation and packed bed adsorption, which suffer from high energy and temperature requirements, scalability, and location dependency issues. Adsorption-based systems could cater to these concerns; however, their current embodiments primarily use packed adsorbent bed design and electricity-driven vacuum pumps to regenerate them. While simple and easy to fabricate, these designs are not scalable and cannot use heat to regenerate them …

Developing Anisotropic Soft Matter As Functional Materials To Interface With Biological Systems, Homa Ghaiedi

Graduate Theses and Dissertations

Liquid crystals (LCs) constitute a subset of soft matter possessing hybrid characteristics from both liquid and crystalline phases. In this state, the center of masses remains uncorrelated similar to an isotropic phase, while the long axis of molecules aligns in parallel, resulting in molecules exhibiting orientational and positional order, either individually or concurrently. The directional alignment inherent in LCs arises from the asymmetrical shape and structure of the constituent molecules, causing a spontaneous self-assembly into ordered phases. This cooperative molecular behavior manifests distinctive optical features when subjected to cross polarizers. The remarkable sensitivity of LCs to external stimuli, including temperature, …

Yeast Surface Display Of Multiple Heterologous Proteins Via Molecular And Biochemical Processing Techniques, Shadrach Ibinola

Graduate Theses and Dissertations

The arming of yeast cell wall, also known as yeast surface display, is an effective technology for expressing target proteins extracellularly. It has been shown to provide bioengineered yeast with qualities that are not known to native yeast such as the ability to survive harsh conditions including high pH and temperature, for example. Furthermore, this technique has been implemented for various applications which include, protein engineering, bioethanol production, bioremediation, vaccine construction, and antibody development. The major mechanisms of yeast surface display exploit agglutination, flocculation, or proteins with internal repeats as the means by which a target (protein) is covalently attached …

Valorization Of Date Palm Waste For The Isolation, Characterization, And Surface Chemistry Modification Of Nanocellulose, Mohsin Raza

Dissertations

This dissertation focuses on the utilization of date palm waste, a lignocellulosic material, as a source for the extraction of nanocellulose (NC), a versatile biopolymer with applications in biodegradable composites, bioplastics, and food packaging. Conventional methods of NC production using mineral acids such as sulphuric and hydrochloric acid are reaching their limits of toxicity, so more environmentally friendly alternatives such as ionic liquids (ILs) are being explored. The research focuses on the characterization of different date palm wastes to evaluate their α−cellulose content, lignocellulosic character, and thermal stability. By comparing extraction methods with mineral acids and ILs, the study evaluates …

Coal Cleat Network Stimulation Through A Combination Of Acidizing And Liquid Nitrogen Fracturing, Mohsen Farrokhrouz, Hamed Akhondzadeh, Yongfei Yang, Faisal U. R. Awan, Stefan Iglauer, Maxim Lebedev, Alireza Keshavarz

Research outputs 2022 to 2026

Gas extraction from Coal Bed Methane has proved challenging mainly due to the low permeability of coals. This study investigated a combination of 2 stimulation techniques, Liquid Nitrogen (LN2) fracturing and acidizing, to increase pore structure and cleat network connectivity in coals. Microcomputed Tomography ( -CT) scanning results suggested that a combination of those 2 applications, in either sequence of implementation, has substantial potential in recovering mineralized fractures and inducing new fractures; thus, leading to wide-open cleat networks. X-ray images show that if LN2 fracturing of coal is preceded by acidizing, the stimulation efficiency increases from more than double the …

Enhanced Phosphogypsum Thermal Reduction By Carbon In Presence Of Sodium Chloride At High Temperature, Li Chao, An Xuebin, Jing Hu, Yixiao Wang, Shizhao Wang, Yunshan Wang, Gang Yang, Yong Sun

Research outputs 2022 to 2026

This paper reports an enhanced approach of thermal reduction of phosphogypsum (PG) in the presence of sodium chloride (NaCl) in its molten phase. The thermodynamic together with in-situ thermogravimetric-Fourier transform infrared spectroscopy (TG-FTIR) result indicates the yield of CaS (solid) at the investigated temperature range (800–850 °C). Addition of NaCl not only appreciably reduces the activation energy of this reaction (800–850 °C) on average from 315 to 175 (kJ·mol−1) materially, but also significantly improve the conversion from CaSO4 to CaS. Additionally, the NaCl based waste salt (NaCl-WS) containing organic compounds (0.21 wt%) was found to produce similar results when compared …

Enzymatic Production Of Cyclodextrin Using Cyclodextrin Glycosyltransferase Immobilized In Metal Organic Frameworks (Mofs), Babatunde Azeez Ogunbadejo

Thesis/ Dissertation Defenses

Cyclodextrins (CDs) and their derivatives have attracted significant attention in the pharmaceutical, food, and textile industries, which has led to an increased demand for their production. CDs are typically produced by the action of cyclodextrin glycosyltransferase (CGTase) on starch. Owing to the relatively high cost of enzymes, the economic feasibility of the entire process strongly depends on the effective retention and recycling of CGTase in the reaction system, while maintaining the enzyme’s activity and stability. Previous supports used for this purpose have numerous drawbacks, including enzyme leaching, activity loss and significant mass transfer limitations. The aim of this dissertation was …

Modernization Of Water Flow Measurement In Open Irrigation Systems Using The Slope-Area Method, R.M. Aliev, Djalilov Anvar

Chemical Technology, Control and Management

This article describes two methods for determining water flow in open irrigation systems: “speed - area” and “slope - area”. The authors considered the problem of its modernization using the existing method for determining water flow “slope - area” in open irrigation systems. The essence of the issue is the remote transfer of parameters necessary for calculating water flow in open irrigation systems and improving the means of their processing. In scientific studies conducted by the authors, the required hydraulic parameters were studied using the “slope - area” and “speed - area” water flow methods. Based on experimentally obtained data, …