Engineering Commons^™

Dislocation-Controlled Perforated Layer Phase In A Peo-B-Ps Diblock Copolymer, Lei Zhu, Ping Huang, Stephen Z. D. Cheng, Qing Ge, Roderic P. Quirk, Edwin L. Thomas, Bernard Lotz, Jean-Claude Wittmann, Benjamin S. Hsiao, Fengji Yeh, Lizhi Liu

College of Polymer Science and Polymer Engineering

Small angle x-ray analyses show that the shear-induced hexagonal perforated layer phase in a poly(ethylene oxide)-b-polystyrene diblock copolymer consists of trigonal (R3(overbar)m) twins and a hexagonal (P6(3)/mmc) structure, with trigonal twins being majority components. Transmission electron microscopy reveals that the hexagonal structure is generated through sequential intrinsic stacking faults on the second layer from a previous edge dislocation line, while the trigonal twins are formed by successive intrinsic stacking faults on neighboring layers due to the plastic deformation under mechanical shear.

Quantitative Analysis And Synthesis Of The Electrokinetic Mass Transport And Adsorption Mechanisms Of A Charged Adsorbate In Capillary Electrochromatography Systems Employing Charged Adsorbent Particles, B. A. Grimes, Athanasios I. Liapis

Chemical and Biochemical Engineering Faculty Research & Creative Works

The dynamic mathematical model of Grimes and Liapis [J. Colloid Interf. Sci. 234 (2001) 223] for capillary electrochromatography (CEC) systems operated under frontal chromatography conditions is extended to accommodate conditions in CEC systems where a positively charged analyte is introduced into a packed capillary column by a pulse injection (analytical mode of operation) in order to determine quantitatively the electroosmotic velocity, electrostatic potential and concentration profiles of the charged species in the double layer and in the electroneutral core region of the fluid in the interstitial channels for bulk flow in the packed chromatographic column as the adsorbate adsorbs onto …

A Preliminary Comparison Of The Mechanical Properties Of Chemically Cured And Ultrasonically Cured Glass Ionomer Cements, Using Nano-Indentation Techniques, Mark R. Towler, A. J. Bushby, R. W. Billington, R. G. Hill

Chemical and Biochemical Engineering Faculty Research & Creative Works

There is a requirement for a dental cement with properties comparable or superior to conventional glass ionomer cements (GICs) but with the command set properties of the resin modified GICs. The objective of this work was to show that the application of ultrasound to conventional Fuji IX commercial glass ionomer cement imparts a command set, whilst improving the short-term surface mechanical properties. Nano-indentation techniques were employed to highlight the improvements in hardness and creep resistance imparted to the cement through the application of ultrasound. The instant set imparted by the application of ultrasound provides improved surface hardness and creep, particularly …

An Investigation Of Centrifugal Blood-Cell Separation, Timothy Edward Roche

Dissertations

This dissertation investigated the centrifugal, batch separation of whole blood into subpopulations of red blood cells (erythrocytes) and white blood cells (leukocytes). Separations took place in a custom-built centrifuge (using a seal-less, anti-twisting feed/withdrawal system) containing, a 25-ml capacity separation chamber. The blood separation chamber had dart-shaped geometry in the radial plane and a constant depth in the axial direction. Separation experiments were performed on whole bovine blood at varying hematocrit, centrifuge speed, and batch duration. A small, companion study of whole human blood separation runs also were conducted; they concentrated on batch duration effect and achieved superior separations.

A …

An Experimental Study Of Dry Particle Coating : Devices, Operating Parameters And Applications, Michelle Ramlakhan Mohan

Dissertations

Dry particle coating, which mechanically coats fine guest particles onto the surfaces of larger host particles, without binders or solvents, is investigated. Several systems of host and guest particles are coated in different devices to study various aspects of dry particle coating. The devices used are Magnetically Assisted Impaction Coating (MAIC) device, Mechanofusion, and the Hybridizer.

MAIC is used to coat fine SiO₂ guest particles onto the surface of larger cornstarch and cellulose host particles. This is done to simultaneously improve the flowability of the host particles, as well as reduce their hydrophilicity. Dry particle coating is used to …

Immobilized Liquid Membranes For Facilitated Transport And Gas Separation, Anjaneya Sarma Kovvali

Dissertations

Separation and purification of gas mixtures is a major area of activity in chemical engineering. Gas separation using facilitated transport membranes has been the subject of considerable research for many years. Immobilized liquid membranes (ILMs) are an important class of facilitated transport membranes. Despite their potential to provide superior performance, they could not achieve commercial success so far due to their instability. Recent research addressed the issue of stability of ILMs by replacing water as the solvent successfully with glycerol. In the present thesis, the relevance of glycerol as an ideal solvent for developing stable ILMs is demonstrated using the …

Microporous Polymeric Membranes Via Melt Processing, Chaiya Chandavasu

Dissertations

Novel ultraporous and microporous membranes from immiscible polymer blends were produced via melt processing and post-extrusion treatments. Polystyrene (PS)/polypropylene (PP) and poly(ethylene terephthalate) (PET)/polypropylene (PP) blend systems with different rheological properties were studied. The blends were first compounded in an intermeshing co-rotating twin-screw extruder and subsequently extruded through a sheet die to obtain the precursor films. These were post treated by uniaxial or biaxial deformation (100-500%) with respect to original dimensions to induce a microporous structure. The porosity is induced by drawing the precursor film at a temperature below the glass transition temperature (T_g) of the minor …

Structures, Intramolecular Rotation Barriers, And Thermodynamic Properties Of Methane And Ethylene Carbons Bonding To Two Unsaturated Groups : Ethylene, Acetylene, Phenyl And Carbonyl, Manish H. Gurbani

Theses

Enthalpy, ΔH_f°₂₉₈, entropy, S°₂₉₈ and heat capacities C_p(T) (300 ≤ T/K ≤ 1500) are determined for Methane, bi-phenyl (CCB2H2); Methane, phenyl-vinyl (CCBCDH2);Toluene, 1-formyl (CCBCOH2), Propyne, 3-phenyl (CCBCTH2); 1,4-pentadiene (CCD2H2); Propene, 3-formyl (CCDCOH2); Methane, di-formyl (CCO2H2); Propyne, 3-formyl (CCOCTH2); Methane, di-ethynl (CCT2H2); Ethene, bi-phenyl (CDCB2); 1,4 Butadiene, 3-phenyl (CDCBCD); Ethene, I-ethynl-l-phenyl (CDCBCT); 1,4 Butadiene,3-vinyl (CDCD2); 1,4 Butadiene, 2-ethynl (CDCDCT) and Ethene, 1,1di-ethynl(CDCT2) using density functional B3LYP/6-31G(d) calculation method. Molecular structures and vibration frequencies are determined at the B3LYP/6-31G(d) density functional calculation level. Evaluation of data from the isodesmic reactions results in ΔH_f° …

A Laboratory And Field Study Of The Attenuation Of Sound Intensity Using A Whistle As The Sonic Generator, Navneet Kumar

Theses

This study investigated the attenuation of sound intensity using a whistle as the sonic generator along with the detailed analysis of all the previous studies. Attenuation of sound in air studies were performed in Otto H. York Center for Environmental Engineering and Science at New Jersey Institute of Technology. Sound attenuation through air was measured by doubling the distance for each of five whistles. It was concluded that Whistle No.5 gives the highest sound intensity of 140.54 dB at a distance of 0.75 ft , the closest distance used for measurement, at a air flow rate of 7.5 SCFM. These …

Performance Of Proton Exchange Membranefuel Cell With Co/H2 Fuel, Hong-Mei Yu, Zhong-Jun Hou, Bao-Lian Yi, Ke-Wan Bi, Jing-Xin Zhang, Zhi-Yin Lin, Ming Han

Journal of Electrochemistry

Fuel of proton exchange membrane fuel cell(PEMFC) mostly comes from reformatecontains CO which will poison the fuel cell electrocatalyst. The effect of CO on the performance of PEMFC was studied in this paper. The results of the experiment show that when CO is fed inPEMFC ,the cell voltage will be decreased violently,then it will become steady with some vibration. The poison will become more serious with higher CO content and weaker at higher temperature. The adsorption of CO on the electrocatalyst is reversible. The PtRu electrocatalyst is moresuitable for the electrocatalysis of CO/H₂ than Pt electrocatalyst.

Study Of The Oxidation Dynamics Of Tizro2 Metal-Ceramics, Wen-Chao Li, Li-Dong Teng

Journal of Electrochemistry

The oxidation dynamics of hot-pressed Ti-ZrO₂ metal-ceramics with the compositionof 50 vol.% Ti and 50 vol.% ZrO₂ has been studied.Thermodynamic analysis shows that Ticould react with O₂ but not with N₂ in the oxidizing process of TiZrO₂ composites at 0.1 MPa air. The oxidation dynamic behavior of Ti-ZrO₂ composites is analogous to that of pure Ti. Theactivation energy for the oxygen diffusion in Ti-ZrO₂ composites is higher than that in Ti solutions, for the presence of ZrO₂ restrains the oxygen diffusion in Ti-ZrO₂ composites. At early stagethe oxidation of Ti-ZrO_{2 …}

Performance Of A Direct Methanol Fuel Cell, Zhao-Bin Wei, Jian-Guo Liu, Ya-Guang Jiao, Wei-Jiang Zhou, Wen-Zhen Li, Li-Kang Chen, Qin Xin, Bao-Lian Yi

Journal of Electrochemistry

A direct methanol fuel cell with 9cm² active area consists of Pt-Ru/C anode ,Pt/Ccathode and Nafion 115 membrane. The effect of operating conditions: methanol solution concentration, oxygen pressure and cell temperature on the cell performances was investigated. The results show that performance of single cell was enhanced by increasing oxygen pressure and celltemperature ,and a maximum power density 75 mW/cm² was obtained in the range of 250-300mA/cm² current density, 0.2 MPa oxygen pressure, 1.0 mol/L methanol concentration and 75 ℃ cell temperature. When cell operating at room temperature, a relatively low, but a stable performance of cell …

New Progress In Studies Of Lithium Nickel Oxide As Positive Electrode Materials Of Lithium Ion Batteris, Han-San Liu, Yong Yang, Zhong-Ru Zhang, Zu-Geng Lin

Journal of Electrochemistry

Lithium nickel oxide as the positive electrode of lithium ion batteries has aroused more and more interests.This paper reviews the recent reserches on synthesis and element-substitution of LiNiO₂ cathode material,and summarizes the intrinsical relationship between properties and sturcture of the material.The developments of new synthesis methods and mutilsubstitution of the material are expecting to be studied in the future research.

A Lagrangian Description Of Flows In Stirred Tanks Via Computer-Automated Radioactive Particle Tracking (Carpt), A. R. Rammohan, A. Kemoun, M. (Muthanna) H. Al-Dahhan, M. P. Dudukovic

Chemical and Biochemical Engineering Faculty Research & Creative Works

In This Study, Computer-Automated Radioactive Particle Tracking (CARPT) is Implemented for the First Time in the Characterization of Flows in Stirred Tanks. Both the Experimental Set-Up Are Discussed. the CARPT Technique is Seen to Capture Qualitatively Most of the Important Flow Phenomena Observed in Stirred Tank Flows, Like the Two Recirculating Loops above and Below the Impeller and the Dead Zones at the Bottom of the Tank. the CARPT Data is Also Used to Extract ''Sojourn'' Time Distributions in Different Zones of the Reactor. These Distributions Are Used to Partially Quantify the Observed Dead and Active Zones in the Tank. …

Studies On The Formation Of Dna-Cationic Lipid Composite Films And Dna Hybridization In The Composites, Murali Sastry, Vidya Ramakrishnan, Mrunalini Pattarkine, Krishna N. Ganesh

Faculty Works

The formation of composite films of double-stranded DNA and cationic lipid molecules (octadecylamine, ODA) and the hybridization of complementary single-stranded DNA molecules in such composite films are demonstrated. The immobilization of DNA is accomplished by simple immersion of a thermally evaporated ODA film in the DNA solution at close to physiological pH. The entrapment of the DNA molecules in the cationic lipid film is dominated by attractive electrostatic interaction between the negatively charged phosphate backbone of the DNA molecules and the protonated amine molecules in the thermally evaporated film and has been quantified using quartz crystal microgravimetry (QCM). Fluorescence studies …

Molecular Simulation Of Adsorption: Gibbs Dividing Surface And Comparison With Experiment, Orhan Talu, Alan L. Myers

Chemical & Biomedical Engineering Faculty Publications

At low temperature near the normal boiling point, computer simulations of adsorption of gases can be compared directly with experiment. However, for adsorptive gas separations in which the gas is adsorbed near or above its critical temperature, absolute simulation variables must be converted to excess variables for comparison with experiment. The conversion of absolute to excess variables requires the helium pore volume of the adsorbent. Lennard-Jones potential parameters for helium gas molecules interacting with the oxygen atoms of silicalite are ε/k = 28.0 K and σ = 2.952 Å. The helium pore volume of silicalite is 0.175 cm …

Particle Motion In Packed/Ebullated Beds By Ct And Carpt, Jinwen Chen, Novica Rados, Muthanna H. Al-Dahhan, Milorad P. Duduković, Duyen Nguyen, Krishniah Parimi

Chemical and Biochemical Engineering Faculty Research & Creative Works

Computed Tomography (CT) and Computer-Automated Radioactive Particle Tracking (CARPT) Were Used to Study the Gas Distribution and Incipient Particle Motion in a Packed/ebullated Bed in Which Gas and Liquid Are in Cocurrent Upflow. CT Scans Were Performed to Evaluate the Gas-Liquid Distributor and Gas Sparger for the Experiments, using a Perforated Plate Gas-Liquid Distributor (With 96 1-Mm Holes, Open Area of 0.1%) and a Gas Sparger (Cross-Shaped, with 16 3-Mm Holes), the Cross-Sectional Gas Holdup Distribution in the Packed/ebullated Bed Was Relatively Uniform, with Gas Holdup of About 0.11 in the Center and 0.09 Near the Wall of the Bed …

Electrode Modification Using An Unzippable Polymer Paste, Ravi F. Saraf

Department of Chemical and Biomolecular Engineering: Patents

A paste is described for capping electrodes with an oxide free metal layer incorporating a solvent, an unzippable polymer and particles. The electrode could be an interconnect such as a C4 bump. A method for forming a coating and for testing integrated circuit chips is also described. The invention overcomes the problem of interconnecting Pb containing electrodes that are covered with an insulating oxide on integrated circuit chips by coating the Pb containing electrode with Au to provide an oxide free surface for testing and interconnection.

Ultra High Density Storage Media And Method Thereof, Ravi F. Saraf

Department of Chemical and Biomolecular Engineering: Patents

A storage media for storing information having a substrate. The substrate has an upper surface and a molecular weight greater than 5,000. Preferably the material is a polymer. The material has a plurality of piles of molecular chains in selected areas formed by pushing the molecular chains of the material on its upper surface to the selected area mechanically with a mechanical tool. The piles represent written information. The mechanical tool is preferably an atomic force microscope. Another aspect of the present invention is a method for storing information having the steps of selecting a material substrate having an upper …

Determination Of An Ethane Intermolecular Potential Model For Use In Molecular Simulations From Ab Initio Calculations, Richard L. Rowley, Tapani A. Pakkanen, Yan Yang

Faculty Publications

Counterpoise-corrected, supermolecule, ab initio energies obtained at the MP2/6-311+G(3df, 2pd) level were computed for 22 different relative orientations of two ethane molecules as a function of the separation distance between the molecular centers. These energies were used to regress the parameters in several simple, analytical, interatomic or site-site models that can be used for implementation in molecular simulations. Sensitivity analysis indicated that the inter molecular potential surface is insensitive to the C-C interactions and that the parameters in the C-C model are coupled and unobtainable from the dimer energies. Representation of the potential surface can be made in terms of …

Polycrystalline Conducting Polymers And Precursors Thereof Having Adjustable Morphology And Properties, Ravi F. Saraf

Department of Chemical and Biomolecular Engineering: Patents

Polycrystalline materials containing crystallites of precursors to electrically conductive polymers and electrically conductive polymers are described which have an adjustable high degree of crystallinity. The intersticial regions between the crystallites contains amorphous material containing precursors to electrically conductive polymers and /or electrically conductive polymers. The degree of crystallinity is achieved by preparing the materials under conditions which provide a high degree of mobility to the polymer molecules permitting them to associate with one another to form a crystalline state. This is preferable achieved by including additives, such as plasticizers and diluents, to the solution from which the polycrystalline material is …

Wear And Friction Behavior Of Pressure Infiltration Cast Copper-Carbon Composites, G. Göller, D. P. Koty, M. Singh, A. Tekin

Chemical & Biomedical Engineering Faculty Publications

Metal matrix composites, prepared by pressure infiltration casting of copper base alloy into 2 types of microporous carbon preforms, one with 100% amorphous carbon and the other containing 40 wt pct. graphite and 60 wt pct. amorphous carbon, have been examined for their wear and friction behavior under ambient conditions using a pin-on-plate reciprocating wear tester. Micro-structural characterization of tribo-surfaces has been carried out. The thin carbon films formed on the tribo-surface reduced the friction coefficient and wear for the composites, especially at low loads on the pin. Adhesive wear observed on the tribo-surface promoted wear and …

Simultaneous Capture And Mineralization Of Coal Combustion Flue Gas Carbon Dioxide (Co2), Morris D. Argyle, Katta J. Reddy, Sanil John, Hollis Weber, Pradip Bhattacharyya, David T. Taylor, Mikol Christensen, Thomas Foulke, Paul Fahlsing

Faculty Publications

The mineral carbonation, a process of converting CO2 into stable minerals (mineralization), has been studied extensively to capture and store CO2. However, most of the mineral carbonation studies have been largely investigated at lab scale. Preliminary and pilot scale studies for accelerated mineral carbonation (AMC) were conducted at one of the largest coal-fired power plants (2120 MW) in the USA by reacting flue gas with fly ash particles in a fluidized bed reactor. In the preliminary experiments, flue gas CO2 and SO2 concentrations decreased from 13.0 to 9.6% and from 107.8 to 15.1 ppmv, respectively during the first 2 min. …

Cfd Modeling Of Multiphase Flow Distribution In Catalytic Packed Bed Reactors: Scale Down Issues, Y. Jiang, Mohan R. Khadilkar, Muthanna H. Al-Dahhan, Milorad P. Dudukovic

Chemical and Biochemical Engineering Faculty Research & Creative Works

Flow Maldistribution in Either a Bench-Scale or Commercial Scale Packed Bed is Often Responsible for the Failure of the Scale Down Unit to Mimic the Performance of the Large Reactor. the Modeling of Multiphase Flow in a Bench-Scale Unit is Needed for Proper Interpretation of Reaction Rate Data Obtained in Such Units. Understanding the Mechanism of Flow Maldistribution is the First Step to Avoiding It. in Order to Achieve This Objective, Computational Fluid Dynamic (CFD) Simulations of Multiphase Flow under Steady State and Unsteady State Conditions in Bench-Scale Cylindrical and Rectangular Packed Beds Are Presented for the First Time. the …

Statistical Characterization Of Macroscale Multiphase Flow Textures In Trickle Beds, Y. Jiang, M. (Muthanna) H. Al-Dahhan, M. P. Duduković

Chemical and Biochemical Engineering Faculty Research & Creative Works

Experimental Studies (Lutran Et Al., Ind. Engng Chem. Res. 30 (1991) 1270; Ravindra Et Al., Ind. Engng Chem. Res. 36 (1997) 5133) and Numerical Simulation (Jiang Et Al., Chem. Engng Sci. 54 (1999) 2409-2419) Lead to the Conclusion that Fluid Flow Distribution in Trickle Beds is a Function of Bed Structure (I.e. Porosity Distribution), Particle External Wetting and Inlet Superficial Velocities of the Two Fluids. in This Study, Quantitative Relationships among the above Parameters Are Developed in a Statistical Manner through a Series of Computational Fluid Dynamics Simulations. the Contribution of Capillary Forces to Liquid Maldistribution is Significant in the …

Lead Free Conductive Composites For Electrical Interconnections, Ravi F. Saraf

Department of Chemical and Biomolecular Engineering: Patents

An electrically conductive paste which includes a thermoplastic polymer, a conductive metal powder and an organic solvent system is disclosed. The invention further encompasses an electrically conductive composite which includes the aforementioned thermoplastic and metal, wherein the metal represents at least about 30% by volume, based on the total volume of the composite. The composite is formed from the paste under elevated temperature. The paste is employed in processes which involve electrically connecting electrical and electronic components under process conditions which convert the paste to the composite.

Bending Instability In Electrospinning Of Nanofibers, A. L. Yarin, S. Koombhongse, Darrell Hyson Reneker

College of Polymer Science and Polymer Engineering

A localized approximation was developed to calculate the bending electric force acting on an electrified polymer jet, which is a key element of the electrospinning process for manufacturing of nanofibers. Using this force, a far reaching analogy between the electrically driven bending instability and the aerodynamically driven instability was established. Continuous, quasi-one-dimensional, partial differential equations were derived and used to predict the growth rate of small electrically driven bending perturbations of a liquid column. A discretized form of these equations, that accounts for solvent evaporation and polymer solidification, was used to calculate the jet paths during the course of nonlinear …

Effects Of Concentration And Temperature On The Coupled Heat And Mass Transport In Liquid Mixtures, Yaşar Demirel, Stanley I. Sandler

Papers in Thermal Mechanics

Using published experimental data on the thermal conductivity, mutual diffusivity, and heats of transport, the degree of coupling between heat and mass flows has been calculated for binary and ternary nonideal liquid mixtures. The binary mixtures consist of two types: the first is six systems of six-to-eight-carbon straight and branched chain alkanes in chloroform and in carbon tetrachloride; and the second is mixtures of carbon tetrachloride with benzene, toluene, 2-propanone, n-hexane, and 11-octane. The ternary mixture considered is toluene-chlorobenzene-bromobenzene. The published data are available at 35°C, 30°C, and 35°C and ambient pressure. Using the linear nonequilibi-ium thermodynainics (LNET) and the …

A Study On The Performance Of Matrix Prepared By Tape Cast And Its Molten Carbonate Fuel Cells (Mcfcs), Hua-Xin Lin, Bao-Lian Yi, Li Zhou, Chang-Qing He, Lian-Ying Kong, En-Jun Zhang

Journal of Electrochemistry

The matrix prepared with γ-LiAlO₂ powder and by tape cast displayed higher ability of preventing from gas cross over and lower ohmic polarization. The voltages of the stack (three cells, 122 cm²) stacked with the matrix were 2.02 and 1.78 V at 200 and 246 mA/cm², respectively, and the output power reached 53.4 W. The cell (28 cm ²) voltages were 0.85 and 0.75 V at 200 and 300 mA/cm², respectively, and the output power was about 6.6 W. Compensating the shrinkage of matrix in stacking cells promoted the enhancement of the …

The Charge Transfer Effect Of Sers Induced By The Electrochemical Hydrogen Evolution Reaction, Feng-Ming Liu, Qi Han, Yan-Xia Chen, Qi-Ling Zhong, Bin Ren, Zhong-Qun Tian

Journal of Electrochemistry

As one of the important mechanisms of SERS, the charge transfer (CT) enhancement requires the strong interaction of the adsorbed species with the substrate in order to permit the transition of charge between the metal Fermi level (energy state) and the molecular orbital. The high enhancement needs the match of the energy gap between the Fermi level (or surface state) and the orbital energy level of the adsorbed molecules with the energy of the incident light. The electrode Fermi level is usually adjusted by the applied potential to satisfy the CT resonance. For the electrochemical reaction process, the frontier orbital …