Engineering Commons^™

Development Of A Model For Induction Heating, Randy Clarksean, Yitung Chen

Fuels Campaign (TRP)

There are two coupled equations that must be solved in order to determine the power deposition. The numerical solution of these equations is needed in order to apply a source term within the energy equations. These equations have previously solved in FIDAP. That implementation used modified versions of the momentum and energy equations to provide a mechanism for the solution of two coupled equations. Currently, we want to solve for the induction heating field in addition to the flow field and the energy equation. In order to do this, a mechanism has to be defined within FIDAP to solve these …

The Development Of H Homogeneous Nucleation Rate Model For Thermoplastic Foams Based On A Molecular Partition Function And Fickian Diffusion, Ronald G. Gabbard

Dissertations

An improved homogeneous nucleation rate model for thermoplastic foams has been developed. This model does not rely on experimentally determined parameters and only uses pure component physical property data and a binary diffusion coefficient. This model, like those derived from classical nucleation theory, is made up of two parts, one that determines the size of the energy barrier in the nucleation process and one that estimates the forward rate of the process. A statistical-mechanical approach was used to create an energy term that is based on a molecular partition function. In this approach, the bulk phase (polymer and blowing, agent …

Process Control Of A Laboratory Combustor Using Neural Networks, Thana Slanvetpan

Dissertations

Active feedback and feedforward-feedback control systems based on static-trained feedforward multi-layer-perceptron (FMLP) neural networks were designed and demonstrated, by experiment and simulation, for selected species from a laboratory two stage combustor. These virtual controllers functioned through a Visual Basic platform. A proportional neural network controller (PNNC) was developed for a monotonic control problem - the variation of outlet oxygen level with overall equivalence ratio (Φ₀). The FMLP neural network maps the control variable to the manipulated variable. This information is in turn transferred to a proportional controller, through the variable control bias value. The proposed feedback control methodology …

Absorption Of Co2 Through Hollow Fiber Membranes Using Aqueous Solutions Of Various Absorbents, Praveen Babu Kosaraju

Theses

Absorption behavior of CO₂ was studied in different hollow fiber membrane modules fabricated using Celgard (polypropylene) and poly(4-methylpentene-1) microporous hollow fibers. Pure water, aqueous solutions of poly(amidoamine) (PAMAM) dendrimer of generation zero and monoethanolamine (MEA) were used as the absorbent; the absorbent solution flowed through the fiber bore, the gas mixture of C02 and N2 flowed countercurrently on the shell side. The system consisted of absorption in one module and stripping with Helium in another module of the same fibers. The absorption characteristics of the dendrimer solution and the MEA solution were studied in the modules built of Celgard …

Dry Particle Coating And Granulation In Rotating Fluidized Beds, Madhuri Kolli

Theses

The practicability of using rotating fluidized bed as dry particle coater and granulator is investigated in this study. Dry particle coating, in which fine guest particles are coated onto bigger host particles in the absence of binders or solvents, is studied for various systems of host and guest particles. Coating results are explained by considering the collisions between the host and guest particles and among themselves. Balance between collisional energy and adhesion energy is suggested to be the limiting condition for the adhesion and hence the coating of guest particles onto host particles. It is observed that the experimental and …

Magnetoelastic Sensing Apparatus And Method For Remote Pressure Query Of An Environment, Craig A. Grimes, Plamen G. Stoyanov, Dimitris Kouzoudis

Chemical and Materials Engineering Faculty Patents

A pressure sensing apparatus for operative arrangement within an environment, having: a sensor comprising a hermetically-sealed receptacle, at least one side of which has an flexible membrane to which a magnetically hard element is attached. Enclosed within the receptacle is a magnetostrictive element that vibrates in response to a time-varying magnetic field. Also included is a receiver to measure a plurality of successive values for magneto-elastic emission intensity of the sensor taken over an operating range of successive interrogation frequencies to identify a resonant frequency value for the sensor. Additional features include: (a) the magnetically hard element may be adhered …

Syntheses And Photoluminescence Of Zinc Oxide Polyaniline Coaxial Nanowires And Their Array, Zhi-Xin Zheng, Yan-Yan Xi, Ping Dong, Huai-Guo Huang, Jian-Zhang Zhou, Lin-Lin Wu, Zhong-Hua Lin

Journal of Electrochemistry

A novel nanomaterial, zinc oxide (ZnO) and polyaniline (PANI) coaxial nanowires and their array in the template, was synthesized using anodic aluminum oxide (AAO) membrane as template. The morphology of these coaxial nanowires was observed with transmission electron microscope (TEM). The experiments on photoluminescence (PL) of coaxial nanowires and their array in AAO membrane show that the visible emission band of ZnO shifts from 530 nm to 400 nm and the luminescence is enhanced for the coaxial nanowires array in AAO membrane,and the visible emission band shifts to a lower wavelergth (385 nm) for coatial nanowires in NaOH solution. Possible …

Electrochemical Properties Of Mixed Metal Oxide Coated Titanium Anodes In Seawater, Ting-Yong Wang, Li-Kun Xu, Guang-Zhang Chen

Journal of Electrochemistry

Mixed metal oxide coated titanium anodes prepared by thermal decomposition were characterized by scanning electron microscopy and electrochemical measurement, while the consumption rate of an anode was also measured in seawater. In order to examine the practical performances of mixed metal oxide-coated anodes, a simulating test on floating dock in seawater has also been carried out. The SEM results indicate that oxide layers exhibited a cracked-mud morphology which endows the anode with good electrocatalytic activity. The electrochemical measurements showed that mixed metal oxide-coated anodes exhibit excellent electrochemical activity and electrochemical stability in seawater. Owing to good corrosion resistance and low …

A Blend Conducting Membranes For Direct Methanol Fuel Cells, Lei Li, Jun Zhang, Hong Wu, Yu-Xin Wang

Journal of Electrochemistry

An attempt was made to modify membranes for direct methanol fuel cells by blending Nafion or polystyrene sulfonic acid (PSSA) with polyvinylidene fluoride (PVDF) from their solutions. The proton conductivity and methanol barrier property as a function of the membrane compositions are discussed. Compared with the Nafion 117 membrane, the PVDF-Nafion blend membranes with 25 wt% of Nafion showed a decrease in the conductivity by about 2 orders of magnitude, and the methanol barrier properties increased about 3 orders of magnitude. If the ratio (σ/P) is adopted to characterize the performance of the membrane, the PVDF-PSSA and PVDF-Nafiion blend membranes …

Development Of 200～500 W Portable Proton Exchange Membrane Fuel Cell Power System, Li-Qing Hu, Li-Rong Zhou, Zheng Li, Jian-Wei Xia, Ming-Zhu Fu, Xin Wu, Yun Zhu

Journal of Electrochemistry

The Properties of the Portable PEM Fuel Cell Power Source are very unique compared with the common primary or rechargeable electro-chemical battery. This paper describes the In this work, of the 200～500 W portable PEM fuel cell power system, was developed. The system mainly composed of four subsystem: 1)Fuel cell stack; 2)Air delivery; 3)Hydrogen source; 4)Heat dissipation and system control.

Electrosynthesis Of Glyoxylic Acid In A Cooled Cathode Reactor, Jin-Hong Fan, Jun Li, Xue-Yun Chen, Wei Li, Hao-Qi Gao

Journal of Electrochemistry

Glyoxylic acid was produced by electroreduction of oxalic acid in a well designed cooled cathode reactor. The cathodic and anodic electrolytes were super-saturated oxalic acid and hydrochloric acid aqueous solutions separated by a super-acid ion-exchange membrane. The current efficiency and time-space yield of glyoxylic acid were studied under different temperatures of cathode and electrolyte, current densities, materials of cathode. With the cooled cathode reactor, the energy consumption was reduced and higher oxalic acid concentration was available in solution, so that current efficiency was improved. The results indicated that the average time-space yield of glyoxylic acid was about 0.032 kg·dm^{-3 …}

Electrocatalytic Oxidation Of Formaldehyde On The Proline Film Modified Electrode, Yu-Rong Ma, Qiu-Xia Yang, Guo-Bao Li, Zheng-Kai Xi, Xue-Lin Wang

Journal of Electrochemistry

The proline film modified electrode and its electrochemical behavior was studied by cyclic voltammetry and spectroelectrochemistry. After incorporation of Ni(Ⅱ), the cyclic voltammograms of the proline Ni(Ⅱ) film electrode exhibited a typical redox peak, which appeared at potential of 0.52 V anodic and 0.44 V cathodic in NaOH. The formal potentials E' were linearly dependent on the pH, and the peak currents ip were linearly dependent on the square root of the scan rates, thus charge transfer in the film was controlled by diffusion. The diffusion coefficient is figured out to be 2×10^_-10 cm²·s^-1. The …

Preparation,Structure And Properties Of Electrochromic Rhodium Oxide Films, Hai-Hong Wang, Tao Wang, Man-Ming Yan, Zhi-Yu Jiang

Journal of Electrochemistry

Electrochromic rhodium oxide films were prepared on ITO substrate by sol-gel method. The films exhibited reversible two-color (bright yellow at reduction and dark green at oxidation) electrochromic behavior in alkaline solution with good cycle stability. In-situ XRD, TGA-DTA, IR, XPS methods were used for studying the structure and chemical process of the films. The diffusion coefficient during the electrochromic process was measured by electrochemical impedance spectra method. It was found that the rhodium oxide films may be suitable for the use in electrochromic devices.

Genome-Wide Screening For Trait Conferring Genes Using Dna Microarrays, R. T. Gill, S. Wildt, Y. T. Yang, S. Ziesman, G. Stephanopoulos

Dartmouth Scholarship

We report a DNA microarray-based method for genome-wide monitoring of competitively grown transformants to identify genes whose overexpression confers a specific cellular phenotype. Whereas transcriptional profiling identifies differentially expressed genes that are correlated with particular aspects of the cellular phenotype, this functional genomics approach determines genes that result in a specific physiology. This parallel gene-trait mapping method consists of transforming a strain with a genomic library, enriching the cell population in transformants containing the trait conferring gene(s), and finally using DNA microarrays to simultaneously isolate and identify the enriched gene inserts. Various methods of enrichment can be used; here, genes …

Characterization Of Structural Changes In Thermally Enhanced Kevlar-29® Fiber, James W. Downing Jr.

Theses and Dissertations

The purpose of this exploratory investigation was to elucidate the structural mechanism accounting for the enhanced compressive properties of heat-treated Kevlar-29® fibers. A novel theory was set forth that hydrogen bond disruption and concurrent misorientation of crystallites may account for the observed augmentation of compressive properties. To examine the said theory, virgin Kevlar-29® fibers were characterized by Thermogravimetric analysis (TGA) and Differential Scanning Calorimetry (DSC) in an effort to determine if crosslinking and/or hydrogen bond disruption was responsible for the improved behavior in compression. Additionally, Kevlar-29® fibers that had been exposed to treatment temperatures of 400, 440, and 470 °C …

The Fission Properties Of Curium Separated From Spent Nuclear Fuel, William Culbreth, Elizabeth Bakker, Jason Viggato

Separations Campaign (TRP)

Curium poses special problems in the chemical preparation of spent nuclear fuel for transmutation. Once separated from the other minor actinides, the seven curium isotopes in spent fuel can lead to nuclear fission with the subsequent release of a large amount of radiation. Several isotopes of curium also generate a significant amount of heat by radioactive decay. Sustained fission can be avoided by preventing the accumulation by more that a critical mass of curium. The heat generation of curium presents even more restriction on the mass of curium that can safely be contained in one location.

To analyze the nuclear …

Melting At Alkyl Side Chain Comb Polymer Interfaces, K. S. Gautam, Ali Dhinojwala

College of Polymer Science and Polymer Engineering

Infrared visible sum frequency generation (SFG) spectroscopy has been used to study structure and melting transition temperatures of alkyl-side chain-acrylate comb polymers at air and solid interfaces. At the air interface, the SFG spectra show methyl bands and two transitions are observed: the first, near the bulk melting temperature, T-m, and the second 10-20degreesC higher than T-m. The shorter the alkyl side chain, the larger the difference between the two transition temperatures. In contrast, methylene bands are observed at sapphire interface with a single transition near T-m (C18).

Modeling And Experimental Verification Of Growth Of An Axisymmetric Cylindrical Rod By Three-Dimensional Laser-Induced Chemical Vapor Deposition, Qing Chen

Doctoral Dissertations

Three-dimensional laser-induced chemical vapor deposition (3D-LCVD) is a recently developed micro-manufacturing process that holds great potential for the production of complex microstructures with high aspect ratio. A laser beam is focused through a vacuum chamber window onto a movable substrate. The heat from the laser at or near the focal spot on the substrate induces the decomposition reaction of precursor gas in the chamber. As a result, solid-phase reaction products are deposited on the substrate to form the microstructure. In this dissertation, a numerical model is developed for simulating kinetically-limited growth of an axisymmetric cylindrical rod by pre-specifying the surface …

Cfd Of Multiphase Flow In Packed-Bed Reactors: Ii. Results And Applications, Y. Jiang, M. R. Khadilkar, M. (Muthanna) H. Al-Dahhan, M. P. Dudukovic

Chemical and Biochemical Engineering Faculty Research & Creative Works

Numerical Simulations of Multiphase Flow using the K-Fluid CFD Model Described in Part I of This Issue Are Presented for Packed Beds at Various Operating Conditions. Both Steady-State and Unsteady-State (E.g., Periodic Operation) Feed Conditions Were Studied Numerically. Predictions of the K-Fluid CFD Model Are Comparable with the Experimental Data in the Literature for Liquid Upflow in a Cylindrical Packed Bed. in Addition to the Mean Porosity and the Longitudinally Averaged Radial Porosity Profile, the Variance of the Porosity Distribution is Needed for Predicting the Probability Density Function of the Sectional Flow Velocity. in the Trickling Flow Regime, the K-Fluid …

Cfd Of Multiphase Flow In Packed-Bed Reactors: I. K-Fluid Modeling Issues, Y. Jiang, M. R. Khadilkar, M. (Muthanna) H. Al-Dahhan, M. P. Dudukovic

Chemical and Biochemical Engineering Faculty Research & Creative Works

The Eulerian K-Fluid CFD Model Was Used to Simulate the Macroscale Multiphase Flow in Packed Beds. the Geometric Complexity of the Bed Structure is Resolved by Statistically Describing the Porosity Distribution. the Complicated Multiphase Interactions Are Computed using the Ergun Type of Formula Developed based on Bench-Scale Hydrodynamic Experiments. the Work is Presented in Two Sequential Articles. Part I Discusses Implementation Issues of the K-Fluid CFD Model for Packed Beds. the Drag Exchange Coefficients Are Obtained from the Model of Holub Et Al. for the Particle-Fluid Interfaces Xks and from the Model of Attou Et Al. (1999) for the Gas …

Motion Of Droplets Along Thin Fibers With Temperature Gradient, Alexander L. Yarin, Wenxia Liu, Darrell Hyson Reneker

College of Polymer Science and Polymer Engineering

Liquid n-decane, n-undecane, n-dodecane, and n-hexadecane formed tiny symmetrical droplets on a partially wettable cylindrical fiber. When a temperature gradient was created along the fiber, the droplets began to move along the fiber toward the cold region. An explanation of the phenomenon is related to the thermocapillary motion. Other possible mechanisms were ruled out. The theoretical results and experimental data agree reasonably well. (C) 2002 American Institute of Physics.

Non-Classical Level Control Of The Utc Distillation Column, Mevan Ranasinghe

Honors Theses

This paper researches the enhancement of accuracy for level control for an operational distillation column. This was achieved through an analysis of both controller and sensor components. The UTC distillation column reboiler level control, like any control system, has multiple sources of error resulting in increased imprecision and inaccuracy. Several fundamental inaccuracies in processing of data were identified and then minimized by the introduction of a non-linear mathematical model prior to any actual controller development. This provides more accurate level measurement and a base for developing accurate controllers.In exploring the effectiveness of alternative controllers, two non-classical controllers are considered in …

Integrating Passenger And Modulo As Learning Tools For Collaborative Engineering Education, Kalamullah Ramli, Frank Schwarz, Stefan Werner, A Halim Shamsuddin, Axel Hunger

Makara Journal of Technology

The University of Indonesia (UI), Gerhard Mercator University (GMU), the Universiti Kebangsaan Malaysia (UKM) have agreed to cooperate as partners to develop a joint bachelor (3+1) and masters (1+1) degree, and collaborate in the research fi elds of multimedia- and internet-based learning and application level active networks. This paper describes the introduction of the Offshore Project and the extending of information technology applications to the partner institutions in this international cooperation which would very much enhance the operations of the new initiative in engineering education, which could provide students in far distance with more fl exible learning environment.

Study Effect Of Salt Washing Process On Content And Iodium Stability Of Salt, Nelson Saksono

Makara Journal of Technology

Effect of Salt Washing Process on Content and Iodium Stability of Salt. Salt washing process should increase the salt quality. It should clean the salt from sludge or clay and also reduce the impurity compound such as Mg, Ca and the reductor content. The objective of these reseach is to assess the effect of washing process on the content og hygroscopic impurities compound (Ca and Mg), and reductor content of salt. The research also investigate the water absorbing, pH, KIO3 content as function of time to obtain effect of washing process on KIO3 stability in salt. The experiment result shows …

Object Classfification In Computer Vision With Discriminant Analysis, Amir Hamzahan

Makara Journal of Technology

A robotic sensor system is always supported by a computer system called ‘computer vision’. The important concept of computer vision is object classfifi cation. In this study two algorithms for object classifi cation in this system will be compared. Firstly, A simple method that do not need complex computation and that considered as an informal method is called binary tree decision structure. This method is based on modest caracteristic decriptors of an object such as vertical line, horizontal line or ellipse line. Unfortunately this method has weakness in recognize an image that contaminated by a noise. Secondly, a more formal …

Making Alloys (Ti1 - Xalx) N Using Plasma Cvd Technique From Alcl3 Powder, H2 And N2 Gas ,With Solvent Ticl4, Keba Moto

Makara Journal of Technology

The substitution of Ti atoms by Al atoms in TiN lattice sites to form (Ti1-xAlx)N is clearly demonstrated by the coatings which were deposited on steel substrate and using plasma CVD technique. The presence of Al atoms in TiN lattice site is shown by means of XRD and EDX techniques: lattice parameters decreasing of TiN as the fraction of Al increases (XRD) and precipitation of hexagonal AlN phase (XRD) as the fraction of Al exceeding 0.8 (EDX). The hardness of these coating are just around 30 GPa, which is beyond the values reported in literatures.

Effects Of 0.25 % Mo (Molybdenum) Which Is Contained In The Ductile Cast Iron On Mechanical Properties Of Austempered Ductile Iron (Adi)., Nukman Nukman, Bustanul Arifin, Bambang Sugiarto

Makara Journal of Technology

The aim of this research is to investigate the effects of 0.25 % Mo (Molybdenum) which is contained in the ductile cast iron on mechanical properties of Austempered Ductile Iron (ADI). The various temperatures and the holding times are used in the heat treatment processes. Using a given 0.25 % Mo in the ductile iron, ADI's alloyed developes a higher ultimate tensile stress value and decreases the elongation if we compare with the as cast (non alloy ductile iron). The higher impact energy value obtained at 9000 C austenization and 375o C austempering temperatures during 60 minutes holding times. The …

The Manufacturing Properties Of Galvanised Steel Sheet With Hexagonal And Tetragonal Network Of Circle Holes, Rahmat Saptono

Makara Journal of Technology

Galvanized steel sheet of 0.8 mm in thickness was drilled with circle holes of 2.5 mm diameter and spacing arranged in tetragonal and hexagonal pattern. The manufacturing properties of specimen were studied through drawing and stretching simulative test. It was concluded from the results that, at high ratio of punch to hole diameter (40/2.5), the drawing properties (LDR) of both square and hexagonal perforated sheet were slightly lower than that of solid sheet, while hexagonal perforated showing LDR somewhat higher than the square one. The stretching properties (LDH) of sheet, however, were much lower than that of solid sheet while …

Develops The Software Of Dsp Processor For The Cdma Circuitry, Arman Djohan D.

Makara Journal of Technology

This research develops the software of DSP Processor type TMS320C54X for the CDMA circuitry. This research apply two algorithms namely Mathematic Algorithm and table lookup Algorithm. From both algorithms, the research examine what algorithm have the fasted processing time and the smallest memory occupation. From the examination results the Mathematic Algorithm have 20.62 milliseconds processing time and the Table lookup algorithm have 14.08 milliseconds processing time. The Table lookup algorithm have the fastest processing time because the Matematic algorithm need the rounding process of the fi gure. Eventhough such processing time is not exceed from the 125 millisecond of delay …

Ethylene Oxide And Propylene Oxide Random Copolymer/Sodium Chloride Aqueous Two-Phase Systems: Wetting And Adsorption On Dodecyl-Agarose And Polystyrene, Yingqing Huang, Daniel Forciniti

Chemical and Biochemical Engineering Faculty Research & Creative Works

Liquid/liquid partition chromatography is a mild yet powerful separation method for a variety of biological materials. This work demonstrates that it should be feasible to immobilize an ethylene oxide-propylene oxide (EO/PO) random copolymer solution and to use a solution of NaCl equilibrated against the polymer solution as the mobile-phase (poly (EO-PO) [P(EO-PO)] and NaCl form two aqueous phases known as aqueous two-phase systems). Three random copolymers with different molecular weights and EO/PO ratios were used. Dodecyl-agarose and polystyrene were tested as possible supports. The wetting energies of the aqueous two-phase systems on these two kinds of surfaces were calculated as …