Engineering Commons^™

Precipitation Of Ultrafine Particles Using Liquid Antisolvent With Concentric Ultrasonic Nozzle And Subcritical Co2, Satya Chaitanya Kunchala

Theses

Nanotechnology has become more relevant in the pharmaceutical industry. Almost 40% of the drugs developed by pharmaceutical industries are poorly soluble in water which limits the bioavailability of these drugs in body fluids. Hence, it is necessary to reduce the particle size, which increases the interfacial surface area. This work focuses on micronization of class ii drug Griseofulvin which is poorly water soluble. Two processes namely, liquid antisolvent precipitation using ultrasonic nozzle and other process using subcritical CO₂ have been used to produce ultrafine particles of this drug.

In liquid antisolvent precipitation, a combination of ultrasound, polymer and surfactant …

Experimental Investigation Of The Effect Of Sonication On The Precipitation Of Grieseofluvin By Impinging Jets, Ankit H. Patel

Theses

Almost 80% of drugs on the market are manufactured as solid dosage forms, such as tablets. Drug bioavailability increases as the particle size decreases and the surface area per unit volume of drug increases. Therefore, there is a keen interest by the pharmaceutical industry to develop techniques that can be used to manufacture particles of active pharmaceutical ingredients (API) in the nano/micro particle range. Impinging jets is one of the most promising techniques to do so.

In this work, a submerged impinging jet system coupled with an ultrasonic probe (sonicator) was used to precipitate Griseofulvin, a common, poorly water-soluble antifungal …

Electrocatalytic Performance Of Carbon Supported Au-Ir Catalyst As Cathodic Catalyst In Direct Formic Acid Fuel Cell, Wei Chen, Ya-Wen Tang, Tain-Hong Lu

Journal of Electrochemistry

In this paper,it is reported for the first time that the electrocatalytic activities of the carbon supported Au(Au/C),carbon supported Ir(Ir/C) and the carbon supported Au-Ir(Au-Ir/C) catalysts prepared in the aqueous solution with tetrahydrofuran(THF) for the oxidation of formic acid and for the oxygen reduction were compared.It was found that all three catalysts showed no electrocatalytic activity for the oxidation of formic acid,but the electrocatalytic activity of the Au-Ir/C catalyst for oxygen reduction was much better than those of Au/C and Ir/C.Thus,the Au-Ir/C catalyst is suitable to be used as the cathodic catalyst in Direct formic acid fuel cell(DFAFC).

Hydrolysis Of Sodium Borohydride By Ru-Ni Foam Catalyst, Jie Cheng, Feng Ye, Tong-Tao Wang, Jing-Jing Li, Yong-Liang Wang, Xin-Dong Wang

Journal of Electrochemistry

This paper presented a method of hydrogen generation from sodium borohydride solution for fuel cells.The Ru-Ni foam catalyst which was prepared by chemical plating showed strong activity and stability.The pretreatment of Ni foam before chemical plating was very important for the catalyst's strong activity and stability.This easy-to-prepared catalyst exhibited a good activity after being used several times.The effects of NaBH₄ concentration,temperature and used times on the hydrogen generation rate were investigated.The results showed that the rate was remarkablely increased with the temperature rising and the rate increased more than ten times when the temperature of reaction rised from 15 …

Electrochemical Synthesis, Characterization And Fluorescence Property Of Nano Na2Sif6, Guo-Xu Qin, Xin-Jun Wan, Xi-Mei Yuan, Dao-Bao Chu

Journal of Electrochemistry

The nano TiO₂ film was prepared by sol-gel process and characterized with X-ray diffraction(XRD) and scanning electron microscope(SEM).It was found that the average size of pore diameter was about 80 nm for the nano TiO₂ film.The Nano Na₂SiF₆ was synthesized by electrochemical deposition on the nanoporous film electrode and characterized with XRD and transmission electron microscope(TEM).The result showed that the average size of nanoparticle was 20 nm for the nano Na₂SiF₆.The fluorescence property of nano Na₂SiF₆ was also studied briefly.The result indicated that the nano Na₂SiF …

Electricity Generation In Microbial Fuel Cells Catalyzed By Mixed Culture And Pure Culture, Chen-Dong Shuang, En-Ren Zhang, Guo-Wang Diao, Fang-Fang Fan, Jie Yuan

Journal of Electrochemistry

Microbial fuel cells(MFCs) were constructed by inoculating fresh sedimentary microorganisms.Effect of phenol on performance of MFCs was investigated.The results showed that the generation of electrical current was induced by bacteria attached on the surface of the anode.Presence of phenol reduced the rate of glucose consumption and extended the duration of electricity generation with the same addition of glucose.In addition,the electricity generation by a single strain(belonging to pseudomonas species) separated from the sedimentary MFC was also investigated.The experimental results indicated that the presence of metabolic intermediates which exhibited electrochemical activity was necessary for the electricity production.Analysis of GC-MS showed that the …

The Effect Of Ru: Sn On Properties Of Ru-Ir-Sn Oxide Anode Coatings, Lei Ji, Jun-Tao Wang, Wen-Bin Liu, Li-Kun Xu, Gui-Lin Xue

Journal of Electrochemistry

The anode coatings of Ru-Ir-Sn oxide with different Ru/Sn ratios were prepared by sol-gel method.The influences of Ru/Sn ratio on properties of anode coatings were studied by scanning electron microscope(SEM),energy dispersive X-ray detector(EDX),X-ray diffraction(XRD).The potential of chlorine evolution,current efficiency,accelerated life,cyclic vohammetry and electrochemical impedance spectroscopy(EIS) tests were carried out.The results showed that there was an obvious effect of Ru/Sn ratio on the morphology of the coatings.The cyclic voltammogram,double layer capacitances and accelerated life of anode coatings had a tendency to fall down firstly then increased as the Ru% increased,the current effency and potential of chlorine evolution had a tendency to …

Design And Fabrication Of The High Efficient Platinum-Nanoporous Gold Catalysts, Zhao-Na Liu, Jin-Tao Zhang, Fang Tian, Peng-Peng Liu, Hou-Yi Ma, Yi Ding

Journal of Electrochemistry

The nanoporous gold(NPG) electrodes with uniform pore sizes and ligaments were prepared by using a simple dealloying method.The as-prepared NPG showed high catalytic activity towards the oxidation of formic acid and formaldehyde.After tiny amount of platinum was deposited onto the NPG substrate,not only the structure stability of NPG was greatly improved,but also the Pt-Au bimetallic catalysts displayed the better catalytic activity and the stronger poison resistance towards the electrooxidation of small organic molecules than the bulk platinum due to synergistic effect between Au and Pt compositions.

Study On Electrocatalytic Oxidation Of Salbutamol At Carbon Nanotubes Modified Electrode, Ying-Liang Wei, Lu-Ping Zhang, Chen Shao, Hui Feng, Xian-Li Li

Journal of Electrochemistry

The multi-wall carbon nanotubes(MWNT) were dispersed successfully into water in the presence of dihexadecyl hydrogen phosphate(DHP) and a stable well-distributed suspension.A was formed sensor based on the multi-carbon nanotubes film coated glassy carbon electrode was developed.The electrochemical response of salbutamol was studied by square wave voltammetry.The oxidation peak potential of salbutamol at the modified electrode was observed at 0.604 V,which shifted about 40 mV negatively.The peak current increased 4.5 folds,in contrast to that at a bare electrode.Under optimal measurement conditions,there was a good linear relationship between the peak current(Ipa) and salbutamol concentration(C) in the range from 8.3 × 1 0 …

A Study Of Pd-Ir On Nickel Foam Cathode For Aluminum-Hydrogen Peroxide Semi-Fuel Cells, Ding-Wang Zhu, Dan-Dan Chen, Bi-Jin Li, Gui-Ling Wang, Dian-Xue Cao

Journal of Electrochemistry

The Pd-Ir/Ni electrodes were prepared by electrodeposition of Pd and Ir on the porous nickel foam surface.The structure,composition and state of the Pd-Ir catalyst were analyzed using SEM and XPS.The catalytic performance of Pd-Ir/Ni for H₂O₂ electroveduction at different concentrations of H₂O₂ were investigated.A limiting current density of 318 mA/cm² was obtained with 0.4 mol/L H₂O₂.The aluminum-hydrogen peroxide semi-fuel cells using different aluminum alloys as anode and Pd-Ir/Ni as cathode were assembled and tested.It was found that the fuel cell with aluminum-manganese alloy anode demonstrated a maximum power density …

Electrocatalytic Oxidation Of Salicylic Acid At Novel Gold Nanoparticle-Modified Glassy Carbon Electrode, Yan-Ping Cui, Chang-Zhu Yang, Jian Huang, Wen-Hong Pu, Jing-Dong Zhang

Journal of Electrochemistry

A gold nano-particles modified glassy carbon electrode(GNP/GCE) was prepared by the"seed-mediated gold nano-particles growth method".Field emission scanning electron microscopy,ultraviolet-visible(UV-vis) spectroscopy analysis and electroalaylsis were employed to study the morphology and electrochemical performances.The resulting electrode showed excellent electro-catalytic activity toward the oxidation of salicylic acid and the response sensitivity was 1.8 fold than that obtained on GCE.Good linear relationship was obtained between response current and salicylic acid concentration in the range of 5.0 × 10^-7 ~8.0 × 10^-5 mol/L,which could be used in the detection of trace salicylic acid.

Thermally Activated Switching In The Presence Of Non-Gaussian Noise, Lora Billings, Mark Dykman, Ira Schwartz

Department of Mathematics Faculty Scholarship and Creative Works

We study the effect of a non-Gaussian noise on interstate switching activated primarily by Gaussian noise. Even weak non-Gaussian noise can strongly change the switching rate. The effect is determined by all moments of the noise distribution. It is expressed in a closed form in terms of the noise characteristic functional. The analytical results are compared with the results of simulations for an overdamped system driven by white Gaussian noise and a Poisson noise. Switching induced by a purely Poisson noise is also discussed.

Kinetics Of Preferential Adsorption And Equilibrium Properties Of Interfacial Layers Formed From Polymer Chains That Tether By Multiple Ends, Jose Alonzo Calderon

All Dissertations

Due to their ability to straddle phase boundaries, polymer brushes represent a model system for studies of polymer-modified surfaces. The research presented in this dissertation focuses on understanding a special type of polymer brushes formed at the solid-fluid interface by self-assembly of block copolymer chains that have the ability to tether by multiple ends, thus creating loops on the surface. Specifically, I study the self-assembly of a series of poly(2-vinylpyridine)-polystyrene-poly(2-vinylpyridine) (PVP-b-PS-b-PVP) triblock copolymers and PVP-b-PS star block copolymers adsorbed from the selective solvent toluene onto silicon and mica surfaces. The triblock and star copolymers have different molecular weights and PS/PVP …

Partial Crystallinity In Alkyl Side Chain Polymers Dictates Surface Freezing, Shishir Prasad, Zhang Jiang, Sunil K. Sinha, Ali Dhinojwala

College of Polymer Science and Polymer Engineering

We have studied the structure of a novel crystalline surface monolayer on top of a disordered melt of the same material [poly(n-alkyl acrylate)s] using grazing incidence x-ray diffraction. The grazing incidence x-ray diffraction, surface tension, and bulk latent heat results show that side chains crystallize except the nine methylene units of the alkyl side chains closest to the polymer backbone. The partial crystallinity along with a thicker surface layer, due to the additional length of the linker group, explains why the difference between the surface order-to-disorder transition temperature and bulk melting temperature increases with a decrease in the length of …

Steady State Measurements In Stress Plateau Region Of Entangled Polymer Solutions: Controlled-Rate And Controlled-Stress Modes, Sham Ravindranath, Shi-Qing Wang

College of Polymer Science and Polymer Engineering

Despite decades of efforts, reliable measurements of nonlinear flow behavior of well-entangled polymers in continuous shear have been challenging to obtain. The present work attempts to accomplish three important tasks: (A) overcome this challenge by adopting a strategy of decoupling theological measurements from the outer meniscus region in a cone-partitioned plate (C/PP) setup; (B) determine whether well-entangled solutions indeed undergo a flow transformation under creep that can be taken to phenomenologically define an entanglement-disentanglement transition (EDT); (C) provide the velocity profiles of such solutions undergoing either controlled-stress or controlled-rate shear by carrying out in situ particle-tracking velocimetric (PTV) measurements. Upon …

Labevolution: What's The Next Mutation?, James D. Sterling

Business and Information Technology Faculty Research & Creative Works

No abstract provided.

Oil Recovery Through Deemulsification Research : Separation Of Water From Emulsified Oil, Aaron Russell, Matthew S. Clay, Christopher A. Cox, Jessica E. Nichols, Summer Scott, Sirikarn Surawanvijit

Chemical Engineering Undergraduate Honors Theses

In an effort to improve the environment, there is a need to recover and reuse the oil and water components of lubricating emulsions used in copper drawing and rolling processes. The Freeport-McMoRan Copper and Gold Inc. copper rod mill located in El Paso, TX was chosen as the site location for this project. It is one of the largest rolling and drawing operation facilities in the world, and it meets the established criteria set by Project ORDER. A large facility generates an average of 8,400 gallons of spent lubricant per day. The WERC emulsion sample contains 98 v% water and …

The Development Of A Computational Model Of Thrombosis In Hemodialysis Catheters, Daniel J. Lattin

Theses and Dissertations

Thromboembolism (TE) significantly limits the usefulness and safety of blood-contacting devices such as hemodialysis catheters. Computer simulation of TE can provide understanding of the process and can facilitate the design of more effective devices. Previous work conducted at BYU successfully modeled TE in a simple, two-dimensional flow cell design by adding quantitative TE code to a commercial computational fluid dynamics (CFD) package, Fluent. This two-dimensional model predicted thrombus initiation and growth and adjusted flow to accommodate thrombus geometries, but was limited by computational power and unsophisticated meshing techniques. To build upon this work, and take advantage of BYU's new supercomputing …

Three-Dimensional Direct Numerical Simulation Of Soot Formation And Transport In A Temporally Evolving Nonpremixed Ethylene Jet Flame, David O. Lignell, Jacqueline H. Chen, Philip J. Smith

Faculty Publications

Three-dimensional direct numerical simulation of soot formation with complex chemistry is presented. The simulation consists of a temporally evolving, planar, nonpremixed ethylene jet flame with a validated, 19-species reduced mechanism. A four-step, three-moment, semiempirical soot model is employed. Previous two-dimensional decaying turbulence simulations have shown the importance of multidimensional flame dynamical effects on soot concentration [D.O. Lignell, J.H. Chen, P.J. Smith, T. Lu, C.K. Law, Combust. Flame 151 (1–2) (2007) 2–28]. It was shown that flame curvature strongly impacts the diffusive motion of the flame relative to soot (which is essentially convected with the flow), resulting in soot being differentially …

Effects Of Moisture On Combustion Of Live Wildland Forest Fuels, Brent M. Pickett

Theses and Dissertations

Current operational wildland fire models are based on numerous correlations from experiments performed on dry (dead) fuel beds. However, experience has shown distinct differences in burning behaviors between dry and moist (live) fuels. To better understand these fundamental differences, an experiment was designed to use a flat-flame burner to simulate a moving fire front which heated and ignited a stationary, individual fuel sample. Samples included various U.S. species from the California chaparral, the intermountain west, and the southeastern regions. Temperature, mass, and video images were recorded throughout each experimental run from which numerous data values were obtained such as time …

Vapor-Liquid Equilibrium Of Polymer Solutions During Thermal Decomposition Of Rigid Foams, Nathan H. King

Theses and Dissertations

Removable Epoxy Foam (REF) and other rigid foams experience severe changes in structure and properties when exposed to high heat. As thermal energy breaks network bonds in the foam many species are formed, including large polymer-like network fragments and smaller solvent-like molecules. During this process a liquid phase may form. The vapor-liquid equilibrium (VLE) behavior of the polymer solutions formed during initial decomposition can be highly non-ideal. In this research VLE behavior of high-temperature polymer solutions was studied and a procedure was developed for predicting that behavior during decomposition of rigid foams. A high-temperature VLE facility was built and validated, …

Microkinetic Model Of Fischer-Tropsch Synthesis On Iron Catalysts, Uchenna Prince Paul

Theses and Dissertations

Fischer-Tropsch synthesis (FTS), developed in the early 1900's, is defined as the catalytic conversion of H2 and CO to hydrocarbons and oxygenates with the production of H2O and CO2. Accurate microkinetic modeling can in principle provide insights into catalyst design and the role of promoters. This work focused on gaining an understanding of the chemistry of the kinetically relevant steps in FTS on Fe catalyst and developing a microkinetic model that describes FTS reaction kinetics. Stable Al2O3-supported/promoted (20% Fe, 1% K, 1% Pt) and unsupported Fe (99% Fe, 1% Al2O3) catalysts were prepared and characterized. Transient experiments including temperature programmed …

Modeling Phase Transitions Of Nanoemulsion For Ultrasonic Gene Delivery, Ghaleb A. Husseini, William G. Pitt, Ram Singh

Faculty Publications

A computer model was written that simulates the transformation of a nanoemulsion droplet to a gas bubble by the application of ultrasound. Experimentally such a technique could be used to enhance non-viral gene transfection beyond the boundary of the endothelial lining of the circulatory system, particularly in tumors exhibiting enhanced permeation and retention of nanoparticles.

A Simulation Of The Neural Action Potential Under The Influence Of Acetylcholinesterase Inhibitors Modeled In The Neuromuscular Junction, Frank Jenkins

Doctoral Dissertations

The rise of terrorism has created an interest in better ways to detect when humans are exposed to neurotoxins, especially nerve gases developed for military use, most of which are acetylcholinesterase inhibitors. Many current methods of detection are based on mass spectrometry, a method that is cumbersome and not particularly robust when used as an early warning method. The detection of acetylcholinesterase inhibitors would benefit from a combined model of the processes occurring in the neuromuscular junction between the presynaptic action potential and the motor end-plate action potential that includes the kinetics of acetylcholine and acetylcholinesterase in the synaptic cleft. …

Effect Of Ph On Ptru Electrocatalysts Prepared Via A Polyol Process On Carbon Nanotubes, Li Ren, Yangchuan Xing

Chemical and Biochemical Engineering Faculty Research & Creative Works

This paper reports a study on the pH effects on the PtRu nanoparticles synthesized in a polyol process that were deposited on carbon nanotubes (CNTs) by reducing metal salts using ethylene glycol at various pHs. It was found that the nanoparticle size, composition, and catalytic activity all were sensitive to pH. the nanoparticles decreased in size as the preparation pH increased from 1.6 to 10.0, with the largest size at 2.47 nm and the smallest at 1.13 nm. an exception was found for pH at 0.7, which resulted in an average size of only 1.01 nm. Preparation pH was found …

Development And Evaluation Of A Sub-Grid Combustion Model For A Landscape Scale 3-D Wildland Fire Simulator, Michael M. Clark

Theses and Dissertations

A mixture-fraction-based thermodynamic equilibrium approach for modeling gas-phase combustion was adapted and used in FIRETEC, a wildfire computational fluid dynamics model. The motivation behind this work was the desire to incorporate the features of complex chemistry calculations from the thermodynamic equilibrium model into FIRETEC without significantly increasing the computational burden of the program. In order to implement the mixture-fraction-based thermodynamic equilibrium approach, a sub-grid pocket model was developed to simulate the local mixture fraction of sub-grid flame sheets. Numerical simulations of wildfires were performed using FIRETEC with the new sub-grid, mixture-fraction-based pocket model to model gas-phase combustion. The thermodynamic equilibrium …

Modeling Of Electronic And Ionic Transport Resistances Within Lithium-Ion Battery Cathodes, David E. Stephenson

Theses and Dissertations

In this work, a mathematical model is reported and validated, which describes the performance of porous electrodes under low and high rates of discharge. This porous battery model can be used to provide researchers a better physical understanding relative to prior models of how cell morphology and materials affect performance due to improved accounting of how effective resistance change with morphology and materials. The increased understanding of cell resistances will enable improved design of cells for high-power applications, such as hybrid and plug-in-hybrid electric vehicles. It was found electronic and liquid-phase ionic transport resistances are strongly coupled to particle conductivity, …

How Accurate Is Students’ Self Assessment Of Computer Skills?, Michael A. Collura, Samuel Bogan Daniels

Engineering and Applied Science Education Faculty Publications

Self-evaluation by students is commonly used as a key element in program and course assessment plans. Such instruments are intended to provide crucial feedback for program improvement and thus play a significant role in closing our assessment loop. For many of the program outcomes, self-assessment by current students and graduates augments other, more objective measures. However, for some outcomes there are no practical means of obtaining objective assessment and we must rely on self-assessment. The heavy reliance on this metric begs the question “How accurate is student self-assessment?” This paper provides data from a second-semester engineering course in which students …

Fuel Composition Analysis Of Endothermically Heated Jp-8 Fuel For Use In A Pulse Detonation Engine, Eric A. Nagley

Theses and Dissertations

Waste heat from a pulse detonation engine (PDE) was extracted via zeolite catalyst coated concentric tube-counter flow heat exchangers to produce supercritical pyrolytic conditions for JP-8 fuel. A sampling system and method were developed that enabled samples of reacted fuel to be extracted during steady state operation. Samples were taken over a range of heat exchanger exit temperatures from 820 K (1016° F) to 940 K (1232° F). Offline analysis of liquid and vapor fuel samples indicated fuel decomposition via typical pyrolytic reaction pathways. The liquid analysis showed conversion of parent fuel components with formation of unsaturates (aromatics and alkenes) …

Local Characteristics Of Hydrodynamics In Draft Tube Airlift Bioreactor, Hu Ping Luo, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Airlift Column Reactors Have Been Widely Used in Bioprocesses. the Design, Scale-Up, and Performance Evaluation of Such Reactors All Require Extensive and Accurate Information About the Gas-Liquid Flow Dynamics, Particularly as Computational Fluid Dynamics (CFD) Has Become More Popular in the Last Decade. However, Due to the Limitation of Most Conventional Techniques for Gas-Liquid Flow Dynamics Measurement, Only Global Hydrodynamic Parameters (E.g., Cross-Sectionally Averaged Liquid Circulation Velocity, overall Gas Holdup, and overall Mass Transfer Rate) Have Been Extensively Studied. the Local Flow Characteristics (E.g., the Macro-Mixing and the Turbulence Intensity) Remain Unclear. in This Study, We Use the Computer Automated …