Engineering Commons^™

Towards Improving Computational Modeling Of The Lumbar Spine - Impact Of Material Properties And Laminotomy On Spinal Biomechanics, Isaac K. Kumi

Mechanical & Aerospace Engineering Theses & Dissertations

Spinal ligaments play a crucial role in maintaining the mechanical stability of the lumbar spine. These dense, collagenous tissues not only resist excessive motion but also distribute loads between spinal components to protect neural structures. Traditionally, the mechanical response of ligaments has been modeled using linear elastic assumptions, which treat the tissue as having a constant stiffness regardless of loading history. While this simplifies analysis, it fails to capture the time-dependent behaviors, such as creep, stress relaxation, and hysteresis, that are characteristic of biological tissues.

Viscoelastic modeling may provide a more physiologically accurate representation by incorporating both elastic and viscous …

Advanced Analytical Biosensing For Cancer Detection And Neural Diagnostics Using Tapered Optical Fiber (Tof), Protonic, And High Throughput Microplate –Based Technologie, Bayan Hassan Alharbi

Chemistry & Biochemistry Theses & Dissertations

This dissertation investigates the development and application of advanced biosensing technologies to enhance early disease detection, neurological diagnostics, and bioactive compound evaluation. The research spans four key areas. First, it introduces tapered optical fiber (TOF)-based plasmonic biosensors for the non-invasive detection of prostate cancer, demonstrating high sensitivity and specificity compared to conventional diagnostic methods.

Second, it explores the use of fluorescent biosensors to test the Transmembrane Electrostatically Localized Proton (TELP) theory, shedding light on the role of localized protons in neuronal signaling and energy transfer. Third, the work presents a high-throughput, microplate-based biosensing platform for analyzing mitochondrial function under nanosecond …

Mathematical Modeling Of Effects Of Tumor Location On Lung Function., Lamargaret Temukisa Johnson

Master of Engineering Theses

Lung cancer has the highest rates of incidence and mortality of all cancers. Most lung cancer tumors are Non-Small Cell Lung Cancer (NSCLC). NSCLC patients with lesions in the upper lobes are found to have better prognosis compared to those with lesions in the middle and lower lobes. Previous studies have suggested various causes for this discrepancy at both the organ-scale and tissue-scale. To model NSCLC growth in different locations within the lung, an organ scale lung model and tissue scale tumor model were coupled through the tissue pressure, and oxygen and carbon dioxide partial pressures. The coupling was used …

Aging Effect On Effective Connectivity Within The Prefrontal-Motor Network And Postural-Related Muscle Responses During Dual-Task Paradigms, Jiahao Pan

Boise State University Theses and Dissertations

Falls are a significant global public issue for older adults, leading to severe health and social impacts. To understand the underlying mechanism of increased fall risk with aging, loss of postural automaticity has been suggested as increased prefrontal cortex and motor cortices activation, as well as worse balance performance in response to the secondary cognitive task. However, the interaction within these cortical regions and its effects on postural-related muscle responses are poorly understood. This dissertation investigated age-related changes in effective connectivity within the prefrontal-motor network, postural related lower limb muscle response, and biomechanical characteristics in response to the secondary cognitive …

Improving Echocardiographic Aortic Aneurysm Assessment In Marfan Syndrome Patients, Joshua Paik, Shubh P. Mehta, Samskrithi Sivakumar, Felix Dinklage, Ahhyun Lee, Benjamin J. Landis, Craig J. Goergen

Discovery Undergraduate Interdisciplinary Research Internship

Marfan syndrome (MFS) is a genetic connective tissue disorder caused by a variant of the fibrillin-1 (FBN1) gene, leading to abnormalities in organs reliant on tissue elasticity. Proximal thoracic aortic aneurysms (TAAs) are a major clinical concern, particularly in pediatric MFS patients, due to their risk of dissection or rupture. Diagnosis and monitoring of TAAs often depend on manual measurements of aortic root diameters from the parasternal long axis views of transthoracic echocardiograms. However, this method is prone to interobserver variability (IOV), which impacts consistency in clinical assessment. To mitigate these limitations, we developed a graphical user interface (GUI) that …

Sex-Dependent Differences In Cardiac Function And Strain In Doxorubicin-Induced Cardiomyopathy, Anna J. A. Webb, Bea O. Cabot, Aasish Chowdary, Wilhelm S. Smith, Benjamin Zeidler, Cortland H. Johns, Craig J. Goergen

Discovery Undergraduate Interdisciplinary Research Internship

Doxorubicin is a chemotherapeutic agent used to treat many types of cancer. While effective, doxorubicin can cause cardiomyopathy, a disease affecting the heart muscle. Although the effects of doxorubicin on the heart are well studied, the mechanisms leading to cardiomyopathy are not well understood. Previous studies have used murine models to study the cardiotoxicity of doxorubicin. These reports showed that cardiac dysfunction is more pronounced in male compared to female mice. The goal of this study is to further evaluate sex differences in doxorubicin induced cardiomyopathy using 4-dimensional strain mapping techniques. In this study, both female and male C57Bl/6J mice …

A Dna Damage Analysis Of Breast Cancer Cells Under Cyclic Mechanical Actuation, Maria C. Macias, Madison Howard, Luis Solorio

Discovery Undergraduate Interdisciplinary Research Internship

Metastasis is the leading cause of mortality in breast cancer, yet tumor cell behavior and their response to mechanical cues in the pre-metastatic niche remains poorly understood. This study investigates how breast cancer cells respond to strain mimicking lung tissue dynamics, with a focus on DNA damage. Using a custom-designed micro-actuating lung model, we cultured mApple at p53BP1 and H2B-GFP reporter cells on fibrillar fibronectin-coated substrates subjected to cyclic mechanical forces that simulate respiratory motion. A group of cells were treated with escalating concentrations of Niraparib (0.1–10 µM), a PARP inhibitor, as a positive control. To visualize and quantify DNA …

Investigation Into Intraocular Pressure Distribution Via Computer Aided Engineering (Cae), Madison Maureen Hinman

Masters Theses

The leading cause for irreversible blindness and vision loss is glaucoma - an eye condition associated with elevated intraocular pressure (IOP). Increased IOP is also seen during other pathological conditions like spaceflight-associated neuro-ocular syndrome (SANS), and non-pathological conditions as when playing a wind instrument. The study aimed to describe the influence of different vitreous cavity size as well as vitreous fluid viscosity on the IOP as measured at the back of the eye on the retina. Improved understanding of eye pressure transmission can aid in a better understanding of eye diseases. The experiment conducted included cavities of varying size and …

Advancements In Microarray Manufacturing Enable Emerging Technologies, Kendall Hoff

Biomedical Engineering ETDs

Significant advances in manufacturing technologies have enabled the production of new DNA microarrays for use in emergent technology. Photolithography, wafer scale manufacturing, and improvements in synthesis chemistry and design enable high-throughput production of extremely high-quality arrays. These new arrays offer extremely high oligonucleotide densities, in the range of tens of thousands of oligonucleotides per square micron. They also offer smaller features sizes, with millions of features per square centimeter. Furthermore, they can be manufactured with the DNA tethered at either end to the surface, leaving either the 5’ or 3’ end free and available for use in enzymatic reactions; and …

Targeted Delivery Of Rapamycin Via Epidermal Growth Factor Receptors In Pancreatic Cancer Cells Inhibits Cell Proliferation And Induces Apoptosis, Adeolu S. Oluremi, Christofer Baldwin, Nickolas L. Gustavision, Mujeebat Bashiru, Adeniyi Nsiah Oyebade, Noureen Siraj, Raj Raghavendra Rao, N. Ali

Biomedical Engineering Faculty Publications and Presentations

Pancreatic cancer (PC) is aggressive and deadly; most PC cells overexpress an epidermal growth factor receptor (EGFR). EGFR-targeting peptide (GE11) was conjugated to gold nanoparticles (AuNPs) for delivering rapamycin (Rap), an mTOR inhibitor that reduces proliferation and induces apoptosis. Biophysical techniques confirmed the conjugation. Rap loading efficiency was 41.5%, with sustained release at a lower pH. Conjugates showed higher uptake in PANC-1 cells than unmodified AuNPs. It also inhibited proliferation and induced apoptosis via pathways involving reactive oxygen species, mitochondrial damage, and caspase activation. This approach represents a promising nanoparticle-based therapeutic strategy targeting PC cells, utilizing GE11-EGFR interactions to minimize …

Targeting Poor Solubility Of Docetaxel: Computational Screening Of Ionic Liquids Using Cosmo-Rs, Najihah Mohd Noor, Amal A.M. Elgharbawy, Huma Warsi Khan, Yumi Zuhanis Has-Yun Hashim, Muhammad Moniruzzaman, Mohd Firdaus Abd. Wahab, Hamzah Mohd Salleh, Siti Nur Idayu Matusin

Publications and Research

Docetaxel (DTX), a chemotherapeutic agent widely used in cancer treatment, has limited therapeutic efficacy owing to its poor oral absorption and low bioavailability. This study aims to improve DTX solubility by predicting its compatibility with ionic liquids (ILs) using conductor-like screening model for real solvents (COSMO-RS) computational modelling. A library of 340 ILs comprising 17 cations and 20 anions was screened for their potential to dissolve DTX, with a particular focus on imidazolium-based ILs that enhance its solubility and pertinence to cytotoxic applications. Computational analysis identifies ILs containing cations such as 1-methylimidazolium [MIM] and 1,3-dimethylimidazolium [DMIM] and anions such as …

Uptake, Distribution, And Activity Of Pluronic F68 Adjuvant In Wheat And Its Endophytic Bacillus Isolate, Anthony Cartwright, Mohammad Zargaran, Anagha Wankhade, Astrid Jacobson, Joan E. Mclean, Anne J. Anderson, David W. Britt

Biological Engineering Student Research

Surfactants are widely utilized in agriculture as emulsifying, dispersing, anti-foaming, and wetting agents. In these adjuvant roles, the inherent biological activity of the surfactant is secondary to the active ingredients. Here, the hydrophilic non-ionic surface-active tri-block copolymer Pluronic^® F68 is investigated for direct biological activity in wheat. F68 binds to and inserts into lipid membranes, which may benefit crops under abiotic stress. F68’s interactions with Triticum aestivum (var Juniper) seedlings and a seed-borne Bacillus spp. endophyte are presented. At concentrations below 10 g/L, F68-primed wheat seeds exhibited unchanged emergence. Root-applied fluorescein-F68 (fF68) was internalized in root epidermal cells and …

A Longitudinal Analysis Of Morphological Shape Variation Of Spleen In Patients With Fontan Surgery, Varatharajan Nainamalai, Håvard Bjørke Jenssen, Mostafa Rezaeitaleshmahalleh, Djinaud Prophete, Jordan Gosnell, Sarah Khan, Marcus Haw, Jingfeng Jiang, Joseph Vettukattil

Michigan Tech Publications

Background: Splenic size serves as a surrogate biomarker for predicting portal vein hyper-tension and liver abnormalities in subjects with Fontan Associated Liver Disease (FALD). We analyze the long-term shape variation of the spleen in FALD subjects using morphological shape features of radiomic features. Methods: We used 154 (84 from computed tomography and 70 from magnetic resonance) image volumes obtained from 36 individuals who underwent stage 3 Fontan procedure and 145 computed tomography images from controls to assess splenomegaly. To understand the splenomegaly, thirteen shape features of the spleen over three 10-year intervals, and variations between controls and FALD subjects were …

Vibration-Based Detection For The Monitoring Of Neonatal Bcpap Respiratory Support To Minimize Duration Of Disconnections, Kaitlyn G. Calabresi, Meera R. Bhat, Lavinia L. Kong, Eli J. Foster, Jonathan Wang, Sangeeta Koilada, Angela Mak, Aastha Kapadia, Niam Mohseni, W. Keith Leung, Suneetha Desiraju, Constanza Miranda

School of Medicine Faculty Publications

Bubble continuous positive airway pressure (bCPAP) is a minimally invasive respiratory support for neonates experiencing respiratory distress syndrome (RDS). It exerts continuous, oscillatory air pressure to encourage lung function and development. Neonates’ movement may cause disconnections at the nasal interface. These disconnections are characterized by the cessation of bubbling at the bCPAP respiratory circuit output and frequently go unnoticed until hypoxia develops. Common Neonatal Intensive Care Unit (NICU) bCPAP systems lack a built-in alarm or accessory device to monitor for disconnections. As a result, nursing personnel must exercise extreme caution utilizing current bCPAP procedure. If a neonate is disconnected, it …

Exploring The Effect Of Led-To-Photodetector Spacing On Subcutaneous Photoplethysmography For Continuous Blood Pressure Measurement, Dario Cabal, Brian Nguyen, David B. Green, Kevin Kilgore, Varun Thakkar, Michael J. Fu, Steve J. Majerus

Student Scholarship

Photoplethysmography (PPG) is widely used to measure heart rate, blood oxygenation, and more recently, blood pressure. Implanted PPG systems offer the possibility to measure similar real-time measures of cardiovascular health, however, the detection method may vary due to a lack of capillary vessels for PPG sensors to observe in muscle tissue. To improve volumetric blood detection in large muscles, without relying on the capillary density of skin, a flexible PPG sensor was developed. The sensor included multiple spacing of illuminating infrared (IR) light emitting diodes (LEDs) and a single IR photodetector. This arrangement was expected to enable detection of blood …

Upcycling Of Polydicyclopentadiene (Pdcpd) Via Dynamic Bonds, Catherine Biju

Biomedical Engineering ETDs

Thermoset polymers are valued for their exceptional mechanical strength and thermal stability, but suffer from irreversibility due to permanent covalent crosslinks, limiting recyclability. Polydicyclopentadiene (pDCPD), a widely used thermoset, exemplifies this limitation despite its excellent mechanical properties. In this study, we report an upcycling strategy for pDCPD through the incorporation of dynamic imine bonds. The successful integration of imine bonds was confirmed by ¹H NMR spectroscopy. Mechanical testing revealed that the modified pDCPD (pDCPD-imine) exhibits enhanced tensile strength and maintains its performance across multiple reprocessing cycles. Moreover, the dynamic nature of the imine bonds imparts healability to the network. This …

Impactor Displacement As A Predictor Of Thoraco-Abdominal Organ Injury: Comparison Of Isolated Organ To Whole Body Tests, Jack Seifert, Jared Michael Koser, Alok Shah, Lance Frazer, Frank A. Pintar, Narayan Yoganandan, Dan Nicolella, Timothy B. Bentley, Brian D. Stemper

Biomedical Engineering Faculty Research and Publications

Purpose

Body armor is used to protect the wearer from penetrating injuries. However, when the armor defeats the projectile, it deforms at high rates into the wearer, referred to as back face deformation (BFD). This deformation can cause a variety of superficial and internal injuries and consequently should be considered when designing body armor. However, current design standards do not adequately consider the effects of BFD, and new data are necessary to inform future design thresholds for BFD. The objective of this study was to develop blunt impact injury risk curves for in vitro thoraco-abdominal organs and determine their applicability …

Development And Characterization Of Pmma/Pvp Nanofiber-Loaded Bioactive Agents With Enhanced Breast Cancer Activity, Samar A. Salim, The British University In Egypt, Esraa Abdelazim, Marwa Abdel Aleem

Nanotechnology Research Centre

Breast cancer remains a leading cause of cancer-related mortality globally, driving the need for novel effective and less toxic therapeutic agents. This study explores the synthesis and characterization of bioactive compounds: 1-(4-methoxyphenyl)-N- (p-tolyl)methanimine (MPTI), N-(4-methylphenyl)benzamide (MPB), and 4-methyl-N-(p-tolyl)benzenesulfonamide (MTS), and their incorporation into a PMMA/PVP polymer matrix for potential anticancer applications. Morphological analysis of the PMMA/PVP-loaded agents via SEM depicts structural modifications in the PMMA/PVP nanofibrous matrix upon incorporation of the bioactive agents. The FTIR analysis of the synthesized compounds before and after loading into the 7PMMA:3PVP nanofibers reveals successful incorporation of MPTI, MPB, and MTS, with characteristic absorption bands …

Harnessing Environmentally Healthy Approaches For Plastic Degradation: A Review And Future Perspectives, Marc Chojnacki

Beyond: Undergraduate Research Journal

In the face of escalating plastic pollution, innovative degradation strategies, such as enzymatic degradation, smokeless incineration technology, and biodegradable plastics, are gaining traction. This paper collates comprehensive research on these methods, assessing their environmental impact and operational feasibility. A special focus is placed on the role of technology and its capacity to spark advancements in these degradation strategies as well as to draw on specific research to understand the economic implications of these methods. At the core of this study is the exploration of potential new, inventive degradation methodologies. Through examining methods of green plastic degradation, the study aims to …

A Wearable-Based Approach To Spinal Posture Tracking And Assessment, Sydney Marie Sherman, Noah Jeffery

Biomedical Engineering: Graduate Reports and Projects

This paper describes the design, manufacturing, and testing of a novel spinal posture tracking wearable device with embedded sensors. Currently on the market, most of the spinal posture tracking devices only focus on one segment of the spine and therefore do not track the entirety of human posture. The objective for this project was to create a wearable device in the form of a “smart shirt” that offers insights into posture trends throughout the day by tracking the entire spine. To begin the project, multiple designs were developed for the sensor array and wearable materials. These concepts were compared against …

Designing A Portable And Accessible Diffuse Reflectance Spectroscopy System For Real-Time Detection Of Cervical Intraepithelial Neoplasia, Allison Scarbrough, Diana Moses, Tongtong Lu, Bing Yu

Biomedical Engineering Faculty Research and Publications

Significance: Over 80% of cervical cancer cases occur in lower-to-middle income countries (LMIC’s). This is partly because current screening techniques lack affordability, accessibility, and/or reliability for use in LMIC’s.

Aim: To develop an optical technique for cervical cancer screening that is affordable, accessible, and reliable for use in LMIC’s.

Approach: We developed a portable diffuse reflectance spectroscopy (DRS) system, which costs < $2500 USD to manufacture, and employs a Raspberry Pi to extract the absorption (μ_a) and reduced scattering (μ'_s) coefficients of biological tissue. The system was subject to travel and intentional rough handling. It was further used to capture 320 DRS spectra taken from 64 tissue-mimicking phantoms. Two …

Characterizing The Relationships Between Cranial Geometry, Brain Morphometry, And Brain Mechanical Properties Using Mr Imaging And Elastography, Jessica Restivo

Theses and Dissertations

Traumatic brain injury (TBI) is a global health concern, with over 69 million cases annually. TBI risk depends on subject-specific neuroanatomical variation, yet research often only considers generic finite element (FE) models, based on the geometry and material composition of a 50th percentile male head. Although highly accurate, subject-specific models require expensive magnetic resonance (MR) imaging, elastography, and time-consuming computational resources. There is a need to create subject-specific TBI models that account for subject-specific variations, without neuroimaging. This study aims to create mathematical models to predict brain morphometry (dimensions, volume) [Objective 1] and mechanical properties (shear stiffness, damping ratio, octahedral …

Advances In Noninvasive Imaging For Detecting Radiation-Induced Lung Injury (Rili), Austen Nissen, Said H. Audi, Anne V. Clough, Brian Fish, Amit Joshi, Meetha Medhora, Jason Walter Sidabras, Heather A. Himburg

Biomedical Engineering Faculty Research and Publications

Purpose: Dr. Richard Hill performed pioneering work in the field of radiation-induced normal tissue injury to the lung including noninvasive imaging studies aimed at identifying imaging biomarkers of radiation-induced lung injury (RILI). RILI is a life-threatening toxicity of radiation exposure relevant to both cancer patients undergoing thoracic radiation therapy (RT) and victims of accidental radiation exposure. The ability to detect RILI noninvasively has the potential to guide treatment planning for RT and, in the case of victims of acute radiation exposures, inform the decision to start mitigative therapies. As part of this special issue of IJRB honoring Dr. Hill’s many …

Characterization Of Lactobacilli-Containing Catheter Segments Developed By Using Selective Laser Sintered Mold., Caden Maners

Master of Engineering Theses

Catheter-associated urinary tract infections (CAUTIs) are a major healthcare burden with current prevention strategies offering limited success. This study presents a novel, self-coating biomaterial approach using a silicone-based bioink embedded with thermally sensitive probiotic strains (L. crispatus, L. rhamnosus, and L. reuteri). Catheter segments were fabricated via bio-injection molding using 3D-printed CAD molds. These Lactobacilli, selected for their probiotic and antimicrobial potential, serve as a non- antibiotic strategy to reduce infection risk. These segments were evaluated for mechanical strength (Shore A hardness), thermal stability (TGA/DSC), porosity and bacterial presence (SEM), biofilm formation (crystal-violet assay), as well as mass retention in …

Ac Electric Fields Manipulate And Concentrate Dna Molecules On Electrodes, Akila Wijesinghe, Dharmakeerthi Nawarathna

Graduate Student Government Association Research Conference

Point-of-care (POC) electric field-based biosensors have emerged as a promising tool to detect early cancer biomarkers such as circulating tumor DNA (ctDNA), microRNA (miRNA), and proteins. To be effective in screening in clinical settings, these biosensors must be simple and easy to use. In this study, we have studied the manipulation of short DNA molecules suspended in a sessile drop to achieve this goal. Alternative current (AC) electric fields were used to polarize DNA molecules and produce dielectrophoretic (DEP) force on DNA molecules. DEP force is used to manipulate polarized DNA molecules towards the higher electric field gradients (toward the …

The Utilization Of Basic Oxygen Furnace Slag As Fine Aggregates In Concrete: Physical, Mechanical, And Durability Properties, Hakan Ozkan

Journal of Sustainable Construction Materials and Technologies

This study examines the feasibility of using basic oxygen furnace slag (BOFS) as an alternative to fine crushed limestone aggregate in concrete. BOFS is sourced from two steel production facilities in Türkiye, designated as I-BOFS and E-BOFS. The experimental results showed that as the E-BOFS aggregate replacement ratio increased, the water-to-cement (w/c) ratio increased to maintain the target workability. The concrete mixtures incorporating E-BOFS exhibited consistent reductions in the compressive strength with an increase in the BOFS ratio. At the same time, I-BOFS maintained higher compressive strength, with only minor losses up to 80% of the substitution ratio. Flexural strength …

Development Of A Self-Cured Alkali-Activated Mortar, Kübra Ekiz Barış

Journal of Sustainable Construction Materials and Technologies

Alkali-activated mortars (AAM) can be produced with self-curing (SC), which supplies internal moisture to accelerate alkaline-activation reactions. The aim of using SC is to make AAMs with an early-age strength without any additional curing energy consumption and higher CO2 emissions, and to obtain in-situ practical advantages that enable the large-scale application of AAMs. The previous study produced natural pozzolan-based AAMs by applying energy-intensive heat (HC), microwave (MWC), and hybrid (HC+MWC) curing. This study investigates alternative curing regimes that reduce production energy without compromising material properties. The impacts of air curing (AC), water curing (WC), and SC on the properties were …

Naoh Molarity Effect On Mechanical And Hydrochloric Acid Resistance Of Geopolymer Mortar Based On Slag, Mahmoud Ziada, Zahraa Mohammed Kamil Al-Mayali

Journal of Sustainable Construction Materials and Technologies

The present research investigates the influence of different sodium hydroxide (NaOH) molarities on the mechanical characteristics and hydrochloric acid (HCl) resistance of geopolymer grouts manufactured from ground granulated blast-furnace slag (GGBS). Geopolymer mortars have attracted interest as sustainable substitutes for traditional cementitious materials due to their advantageous environmental effects and enhanced durability features. This study involved the fabrication of geopolymer mortar specimens by altering the NaOH molarity (M) from 6 M to 14 M. The mechanical and physical qualities were assessed using compressive strength, capillary water absorption, flexural strength, slump flow, and ultrasonic pulse velocity (UPV) tests. Subsequently, the geopolymer …

Effect Of Expanded Perlite And Exfoliated Vermiculite Aggregate Additives On Water Vapor Permeability Performance Of Cement-Based Lightweight Mortars, Lütfullah Gündüz, Şevket Onur Kalkan

Journal of Sustainable Construction Materials and Technologies

Vapor diffusion is the movement of water vapor molecules through porous materials such as wood, insulation products, and lightweight wall elements due to differences in vapor pressure. Vapor retarders are used to control vapor diffusion through wall sections and surfaces. All building materials provide some resistance to vapor diffusion, and the amount of resistance varies depending on the material's properties. These properties can vary with relative humidity and moisture content, age, temperature, and other factors. Vapor resistance is usually expressed using the inverse term of ``vapor permeability,'' which is the relative ease of vapor diffusion through a material. Water vapor …

Rubber-Modified Self-Compacting Mortar: Evaluating Setting Time And Strength Development, Navvar Makansi, Süleyman Ipek, Erhan Güneyisi

Journal of Sustainable Construction Materials and Technologies

The influence of using crumb rubber (CR) obtained from the second scraping of used tires as fine aggregate in manufacturing self-compacting mortar (SCM) was investigated experimentally in this study. To explore this, natural fine aggregate in SCM mixes was partially replaced with CR at levels ranging from 5% to 25% by total fine aggregate volume. Two mix series, one with a total binder of 500 kg/m3 and the other with a 540 kg/m3 binder, were designed at water-to-binder ratios of 0.40 and 0.33. Ordinary Portland cement (80% by weight) and fly ash (20% by weight) were used to manufacture mortars. …