Open Access. Powered by Scholars. Published by Universities.®
- Institution
-
- Marquette University (719)
- University of Nebraska - Lincoln (697)
- California Polytechnic State University, San Luis Obispo (643)
- Old Dominion University (523)
- Engineering Conferences International (510)
-
- New Jersey Institute of Technology (474)
- Utah State University (465)
- University of Arkansas, Fayetteville (433)
- Purdue University (417)
- University of Texas at Arlington (366)
- Wright State University (321)
- Virginia Commonwealth University (314)
- Clemson University (300)
- University of Kentucky (296)
- Missouri University of Science and Technology (287)
- City University of New York (CUNY) (223)
- Michigan Technological University (214)
- Washington University in St. Louis (211)
- Cleveland State University (193)
- University of South Florida (166)
- Dartmouth College (152)
- Technological University Dublin (152)
- Santa Clara University (148)
- Wayne State University (137)
- Boise State University (128)
- Rowan University (126)
- University of South Carolina (124)
- Louisiana Tech University (117)
- Al Esraa University (115)
- Florida Institute of Technology (108)
- Keyword
-
- Biomechanics (190)
- Biomedical Sciences (144)
- Tissue engineering (133)
- Biomaterials (119)
- Engineering (118)
-
- Cancer (111)
- Department of Biomedical Engineering (104)
- Machine learning (100)
- Microfluidics (98)
- Humans (93)
- Applied sciences (92)
- Biomedical Engineering (91)
- Nanoparticles (88)
- Biomedical engineering (87)
- Daniel Felix Ritchie School of Engineering and Computer Science (86)
- Bone (82)
- Drug delivery (79)
- Electrospinning (79)
- Department of Biomedical, Industrial & Human Factors Engineering (78)
- Bioengineering (75)
- Tissue Engineering (72)
- Electroporation (67)
- EEG (64)
- Hydrogel (62)
- Deep learning (58)
- Gait (57)
- Ultrasound (57)
- Imaging (56)
- Rehabilitation (54)
- Finite element analysis (53)
- Publication Year
- Publication
-
- Biomedical Engineering Faculty Research and Publications (600)
- Theses and Dissertations (530)
- Theses (386)
- Master's Theses (304)
- Department of Agricultural and Biological Systems Engineering: Faculty Publications (297)
-
- Biomedical Engineering (278)
- Chemical and Biochemical Engineering Faculty Research & Creative Works (247)
- Cell Culture Engineering XV (246)
- Electronic Theses and Dissertations (232)
- Browse all Theses and Dissertations (224)
- Bioengineering Theses - Archive (194)
- McKelvey School of Engineering Graduate Student Theses & Dissertations (190)
- Cells and Materials (166)
- USF Tampa Graduate Theses and Dissertations (162)
- Bioelectrics Publications (158)
- Biomedical Engineering Undergraduate Honors Theses (154)
- All Dissertations (148)
- Graduate Theses and Dissertations (133)
- Bioengineering Dissertations - Archive (131)
- The Summer Undergraduate Research Fellowship (SURF) Symposium (127)
- Weldon School of Biomedical Engineering Faculty Publications (127)
- Doctoral Dissertations (122)
- All Theses (120)
- ETD Archive (119)
- Al-Esraa University College Journal for Engineering Sciences (115)
- Dissertations (109)
- Dissertations and Theses (107)
- Publications and Research (103)
- Biomedical, Industrial & Human Factors Engineering Faculty Publications (95)
- All Graduate Theses and Dissertations, Spring 1920 to Summer 2023 (94)
- Publication Type
- File Type
Articles 5671 - 5700 of 11503
Full-Text Articles in Engineering
Development Of Highly Sensitive And Selective Breathing Sensors Using Molecular Imprinted Filtering For Diabetic And Alcoholic Patients, Md. Saleh Akram Bhuiyan
Development Of Highly Sensitive And Selective Breathing Sensors Using Molecular Imprinted Filtering For Diabetic And Alcoholic Patients, Md. Saleh Akram Bhuiyan
Electronic Theses and Dissertations
Wellness sensor technology is an emerging diagnostic test research field, which mostly deal with the point of care of the patients in the recent days. Due to the lack of awareness from the patients, most diseases cannot be detected in due time. This led to worse conditions, such as diabetic and alcoholic syndrome. Therefore, many research groups have been working to develop portable sensor devices that can track serious diseases. These include diabetic and alcoholic biomarkers in breathing. These devices have very high selectivity and reliability. However, the major limitation of biomarkers is that it deals with the bio-molecular based …
Electrotransfer Of Plasmid Dna Radiosensitizes B16f10 Tumors Through Activation Of Immune Response, Monika Savarin, Urska Kamensek, Maja Cemazar, Richard Heller, Gregor Sersa
Electrotransfer Of Plasmid Dna Radiosensitizes B16f10 Tumors Through Activation Of Immune Response, Monika Savarin, Urska Kamensek, Maja Cemazar, Richard Heller, Gregor Sersa
Bioelectrics Publications
Background. Tumor irradiation combined with adjuvant treatments, either vascular targeted or immunomodulatory, is under intense investigation. Gene electrotransfer of therapeutic genes is one of these approaches. The aim of this study was to determine, whether gene electrotransfer of plasmid encoding shRNA for silencing endoglin, with vascular targeted effectiveness, can radiosensitize melanoma B16F10 tumors.
Materials and methods. The murine melanoma Bl6F10 tumors, growing on the back of C57BI/6 mice, were treated by triple gene electrotransfer and irradiation. The antitumor effect was evaluated by determination of tumor growth delay and proportion of tumor free mice. Furthermore, histological analysis of tumors (necrosis, apoptosis, …
Transient Alt Activation Protects Human Primary Cells From Chromosome Instability Induced By Low Chronic Oxidative Stress, Elisa Coluzzi, Rossella Buonsante, Stefano Leone, Anthony J. Asmar, Kelley L. Miller, Daniela Cimini, Antonella Sgura
Transient Alt Activation Protects Human Primary Cells From Chromosome Instability Induced By Low Chronic Oxidative Stress, Elisa Coluzzi, Rossella Buonsante, Stefano Leone, Anthony J. Asmar, Kelley L. Miller, Daniela Cimini, Antonella Sgura
Bioelectrics Publications
Cells are often subjected to the effect of reactive oxygen species (ROS) as a result of both intracellular metabolism and exposure to exogenous factors. ROS-dependent oxidative stress can induce 8-oxodG within the GGG triplet found in the G-rich human telomeric sequence (TTAGGG), making telomeres highly susceptible to ROS-induced oxidative damage. Telomeres are nucleoprotein complexes that protect the ends of linear chromosomes and their dysfunction is believed to affect a wide range of cellular and/or organismal processes. Acute oxidative stress was shown to affect telomere integrity, but how prolonged low level oxidative stress, which may be more physiologically relevant, affects telomeres …
Electrosensitization Increases Antitumor Effectiveness Of Nanosecond Pulsed Electric Fields In Vivo, Claudia Muratori, Andrei G. Pakhomov, Loree Heller, Maura Casciola, Elena Gianulis, Sergey Grigoryev, Shu Xiao, Olga N. Pakhomova
Electrosensitization Increases Antitumor Effectiveness Of Nanosecond Pulsed Electric Fields In Vivo, Claudia Muratori, Andrei G. Pakhomov, Loree Heller, Maura Casciola, Elena Gianulis, Sergey Grigoryev, Shu Xiao, Olga N. Pakhomova
Bioelectrics Publications
Nanosecond pulsed electric fields are emerging as a new modality for tissue and tumor ablation. We previously reported that cells exposed to pulsed electric fields develop hypersensitivity to subsequent pulsed electric field applications. This phenomenon, named electrosensitization, is evoked by splitting the pulsed electric field treatment in fractions (split-dose treatments) and causes in vitro a 2- to 3-fold increase in cytotoxicity. The aim of this study was to show the benefit of split-dose treatments for in vivo tumor ablation by nanosecond pulsed electric field. KLN 205 squamous carcinoma cells were embedded in an agarose gel or grown subcutaneously as tumors …
Nanosecond Pulsed Electric Field Induced Changes In Cell Surface Charge Density, Diganta Dutta, Xavier-Lewis Palmer, Anthony Asmar, Michael Stacey, Shizhi Qian
Nanosecond Pulsed Electric Field Induced Changes In Cell Surface Charge Density, Diganta Dutta, Xavier-Lewis Palmer, Anthony Asmar, Michael Stacey, Shizhi Qian
Bioelectrics Publications
This study reports that the surface charge density changes in Jurkat cells with the application of single 60 nanosecond pulse electric fields, using atomic force microscopy. Using an atomic force microscope tip and Jurkat cells on silica in a 0.01 M KCl ionic concentration, we were able to measure the interfacial forces, while also predicting surface charge densities of both Jurkat cell and silica surfaces. The most important finding is that the pulsing conditions varyingly reduced the cells' surface charge density. This offers a novel way in which to examine cellular effects of pulsed electric fields that may lead to …
Modulating The Innate Immune Response To Electrospun Scaffolds And Polymer Degradative Byproducts, Daniel Abebayehu
Modulating The Innate Immune Response To Electrospun Scaffolds And Polymer Degradative Byproducts, Daniel Abebayehu
Theses and Dissertations
Implanted biomaterials often induce inflammation that frequently leads to the foreign body response, fibrosis, and the failure of the implant. Thus, it is important to evaluate how cells interact with materials to promote a more regenerative response. It is critical to determine how to modulate the response of tissue resident innate immune cells, as they are among the first cells to interact with implanted materials. Among tissue resident innate immune cells are mast cells, which are inflammatory sentinels that degranulate and orchestrate the fate of other cell populations, such as monocytes/macrophages and lymphocytes. Mast cells have also been reported to …
Freeze-Drying As A Novel Biofabrication Method For Achieving A Controlled Microarchitecture Within Large, Complex Natural Biomaterial Scaffolds, Claire Brougham, Tanya J. Levingstone, Nian Shen, Gerard M. Cooney, Thomas C. Flanagan, Stefan Jockenhoevel, Fergal J. O’Brien
Freeze-Drying As A Novel Biofabrication Method For Achieving A Controlled Microarchitecture Within Large, Complex Natural Biomaterial Scaffolds, Claire Brougham, Tanya J. Levingstone, Nian Shen, Gerard M. Cooney, Thomas C. Flanagan, Stefan Jockenhoevel, Fergal J. O’Brien
Articles
The biofabrication of large scaffolds from natural biomaterials into complex 3D shapes with controllable microarchitecture remains a major challenge. Freeze-drying (or lyophilization) is a technique used to create bioactive scaffolds with a porous architecture and is typically only used to generate scaffolds in planar 3D geometries. Here we report the development of a new biofabrication process to form a collagen-based scaffold into a large, complex geometry which has a large height to width ratio, and a controlled porous microarchitecture. This biofabrication process was validated through the successful development of a heart valve shaped scaffold, fabricated from a collagen-glycosaminoglycan co-polymer. Notably, …
Design Of A Modular Endothelialized Platform For Vascularized Bone Regeneration, Kevin Barrett Miles
Design Of A Modular Endothelialized Platform For Vascularized Bone Regeneration, Kevin Barrett Miles
Wayne State University Dissertations
The gold standard for bone regeneration requires harvesting a piece of healthy bone from the patient through a painful procedure, but this piece of autologous bone graft contains the bone and endothelial cells required to rapidly regenerate bone in a defect. We have developed a modular bone regeneration platform, composed of mesenchymal stem cells (MSCs) and hydroxyapatite (HAP) microgranules encapsulated in microcapsules, to replace autologous graft harvesting. The microcapsules are composed of a polyelectrolyte membrane formed by the ionic-complex reaction between chondroitin 4-sulfate (C4S) and chitosan. The specific aims of this thesis were to 1) examine the ability of C4S/HAP/chitosan …
Profiling Resistance To P450-Activated Food Carcinogens Using Toxicogenomic Approaches In Budding Yeast, Nicholas Stjohn
Profiling Resistance To P450-Activated Food Carcinogens Using Toxicogenomic Approaches In Budding Yeast, Nicholas Stjohn
Legacy Theses & Dissertations (2009 - 2024)
The human response to environmental carcinogens, some of which require metabolic activation, is highly variable. Factors such as environment, lifestyle, and genetics all influence the rates of exposure to and ultimate bioactivation of these compounds. Genetic factors include mutations to cell-cycle regulation, cell proliferation, and DNA repair genes; however, epidemiological studies may lack significance due to inadequate patient numbers. We used budding yeast as a model organism to determine genetic susceptibility to food-associated carcinogens, including aflatoxin (AFB1) and heterocyclic aromatic amines (HAAs). Budding yeast does not contain P450s that activate these compounds, so expression vectors were induced that contain human …
Detecting And Analyzing Trna Modification Systems And Homologs Using In Silico And Colorectal Cancer Models, Khadijah Onanuga
Detecting And Analyzing Trna Modification Systems And Homologs Using In Silico And Colorectal Cancer Models, Khadijah Onanuga
Legacy Theses & Dissertations (2009 - 2024)
tRNA modifications can be considered epitranscriptomic signaling components that regulate translation and play integral roles in stress response pathways. As such, tRNA modification enzymes have roles in cancer etiology and potential utility as biomarkers of pathological states. For my thesis project I have used computational and wet bench approaches to study tRNA modification systems. Chapter two of my thesis deals with tRNA modification detection, as current methods are costly, time consuming, and require RNA fragmentation. I present a single-molecule-based approach for RNA modification detection, which involves in slico studies using a 5-layered graphene nanopore. Our simulations using a 1.5 nm …
การพัฒนาเครื่องพลาสมาเย็นแบบเจ็ตที่ความดันบรรยากาศสำหรับการทำให้เลือดแข็งตัว, ณัฐนพิญช์ จรูญศักดิ์
การพัฒนาเครื่องพลาสมาเย็นแบบเจ็ตที่ความดันบรรยากาศสำหรับการทำให้เลือดแข็งตัว, ณัฐนพิญช์ จรูญศักดิ์
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้เป็นการพัฒนาเครื่องพลาสมาเย็นแบบเจ็ตที่ความดันบรรยากาศสำหรับการทำให้เลือดแข็งตัวที่ประกอบด้วย 2 ส่วนหลักคือ แหล่งจ่ายไฟฟ้าแรงดันสูงความถี่สูงชนิดกระแสสลับ แบบฟลายแบค (Fly back) ที่ควบคุมการทำงานด้วยไมโครคอนโทรลเลอร์และพลาสมาโปรบด้วยวัสดุอุปกรณ์ที่หาได้ในประเทศ โดยออกแบบให้สามารถปรับตั้งค่าความถี่และดิวตี้ไซเคิลผ่านระบบไมโครคอนโทรลเลอร์ได้ที่ความถี่ 30 35 และ 40 kHz และเปอร์เซ็นต์ดิวตี้ไซเคิล 30 40 50 และ 70 % ตามลำดับ ส่วนการปรับตั้งค่าของไฟฟ้าแรงดันสูงเป็นการปรับด้วยมือได้ตั้งแต่ 0.1 ถึง 15 kVrms จากผลการทดลองพบว่า แหล่งจ่ายไฟฟ้าแรงดันสูงความถี่สูงชนิดกระแสสลับที่พัฒนาขึ้นมีประสิทธิภาพการทำงานเท่ากับ 74.28 % การศึกษาผลกระทบของตัวแปรต่างๆต่อความยาวและอุณหภูมิของพลาสมาเจ็ต พบว่าค่าไฟฟ้าแรงดันสูง ความถี่ เปอร์เซ็นต์ดิวตี้ไซเคิล และอัตราการไหลของก๊าซอาร์กอน เป็นตัวแปรสำคัญที่ส่งผลต่อความสม่ำเสมอของเปลวพลาสมา ผลการวิเคราะห์คุณสมบัติของพลาสมาด้วยเครื่อง Optical Emission Spectroscopy (OES) พบว่า มีอุณหภูมิของอิเล็กตรอนที่ความถี่ต่างๆและที่อัตราการไหลต่างๆที่มีค่าเท่ากับ 0.43 eV และความหนาแน่นของอิเล็กตรอนของพลาสมาอยู่ในช่วง 5.46x109 – 1.74x1012 cm-3 ซึ่งสามารถระบุได้ว่าพลาสมาแบบเจ็ตที่พัฒนาขึ้นเป็นพลาสมาเย็น จากผลทดสอบการแข็งตัวของเลือดด้วยเครื่องพลาสมาเย็นแบบเจ็ตที่พัฒนาขึ้น พบว่า ที่ระยะห่างระหว่างปลายโปรบกับกระจกสไลด์ 1 เซนติเมตร พลาสมาเย็นแบบเจ็ตที่พัฒนาขึ้นสามารถทำให้เลือดที่ผสมสารต้านการแข็งตัวของเลือด EDTA ปริมาณ 2.5 µL. ให้แข็งตัวภายในเวลาประมาณ 20 วินาที ได้เร็วกว่าเลือดผสมสาร EDTA ที่ไม่ผ่านการฉายด้วยพลาสมาและเลือดผสมสาร EDTA ที่ผ่านการเป่าด้วยก๊าซอาร์กอนที่อัตราการไหลของก๊าซอาร์กอน 5 L/min
Lessons Learned From A 10-Year Collaboration Between Biomedical Engineering And Industrial Design Students In Capstone Design Projects, Jay R. Goldberg, Pascal Malassigné
Lessons Learned From A 10-Year Collaboration Between Biomedical Engineering And Industrial Design Students In Capstone Design Projects, Jay R. Goldberg, Pascal Malassigné
Biomedical Engineering Faculty Research and Publications
Engineers and industrial designers have different approaches to problem solving. Both place heavy emphasis on identification of customer needs, manufacturing methods, and prototyping. Industrial designers focus on aesthetics, ergonomics, ease of use, manufacturing methods, and the user’s experience. They tend to be more visual and more concerned with the interaction between users and products. Engineers focus on functionality, performance requirements, analytical modeling, and design verification and validation. They tend to be more analytical and more concerned with the design of internal components and product performance. Engineers and industrial designers often work together on project teams in industry. Collaboration between the …
Mri Methods For Imaging The Feto-Placental Vasculature And Blood, Uday Krishnamurthy
Mri Methods For Imaging The Feto-Placental Vasculature And Blood, Uday Krishnamurthy
Wayne State University Dissertations
Fetal magnetic resonance imaging (MRI) in recent times has become a well-established adjunct to ultrasound (US) in routine clinical prenatal care and diagnostics. The majority of fetal MRI is restricted to T2-weighted scans, where the diagnosis is based on the appearance of normal and abnormal tissue. Although there have been many advancements in MRI and a plethora of sequences, that probe different anatomical and different physiological process, the adaptation of these in fetal imaging has been rather slow. Many of these can extract quantitative parameters that can throw light on the underlying tissue’s normal/patho-physiology. But the use of such quantitative …
Biomaterials Approaches For Utilizing The Regenerative Potential Of The Peripheral Nerve Injury Microenvironment, Melissa Renee Wrobel
Biomaterials Approaches For Utilizing The Regenerative Potential Of The Peripheral Nerve Injury Microenvironment, Melissa Renee Wrobel
Wayne State University Dissertations
Clinically available treatments are insufficient to achieve full functional recovery in large (>3cm) peripheral nerve injuries (PNI). The objectives in this thesis were 1) to study often overlooked elements of intrinsic PNI repair including release of inhibitory CSPGs and post-injury responses of inflammatory macrophages and dedifferentiated Schwann cells; 2) to create biomaterial scaf-folds featuring topographical and adhesive cues to enhance neurite outgrowth; and 3) to test the ability of those cues to direct macrophages and Schwann cells towards a pro-regenerative phe-notype. It is hypothesized that recapitulating the positive and negative cues of the PNI microenvi-ronment can better improve regeneration. …
Utility Of Ultrasound/Photoacoustic Imaging For Accurate Catheter Tracking And Temperature Monitoring During Endovenous Laser Ablation, Ayushi Jharia, Keerthana Palani, Yan Yan
Utility Of Ultrasound/Photoacoustic Imaging For Accurate Catheter Tracking And Temperature Monitoring During Endovenous Laser Ablation, Ayushi Jharia, Keerthana Palani, Yan Yan
Research Opportunities for Engineering Undergraduates (ROEU) Program 2016-17
Laser ablation is a treatment method that uses light energy through a catheter inserted into a vein to induce localized heat to close the diseased blood vessels. Ultrasound (US) imaging has been used for catheter visualization and tracking. US has limitations for tracking the accurate location of the fiber tip inside small perforating veins such as angular dependency and comet tail artifacts. We propose a robust and accurate method for fiber tip tracking using combined US and Photoacoustic (PA) imaging to overcome the existing limitations.
Effects Of Training Intensity On Locomotor Performance In Individuals With Chronic Spinal Cord Injury: A Randomized Crossover Study, Gabrielle Brazg, Meghan Fahey, Carey L. Holleran, Mark Connolly, Jane Woodward, Patrick W. Hennessy, Brian D. Schmit, T. George Hornby
Effects Of Training Intensity On Locomotor Performance In Individuals With Chronic Spinal Cord Injury: A Randomized Crossover Study, Gabrielle Brazg, Meghan Fahey, Carey L. Holleran, Mark Connolly, Jane Woodward, Patrick W. Hennessy, Brian D. Schmit, T. George Hornby
Biomedical Engineering Faculty Research and Publications
Background. Many physical interventions can improve locomotor function in individuals with motor incomplete spinal cord injury (iSCI), although the training parameters that maximize recovery are not clear. Previous studies in individuals with other neurologic injuries suggest the intensity of locomotor training (LT) may positively influence walking outcomes. However, the effects of intensity during training of individuals with iSCI have not been tested. Objective. The purpose of this pilot, blinded-assessor randomized trial was to evaluate the effects of LT intensity on walking outcomes in individuals with iSCI. Methods. Using a crossover design, ambulatory participants with iSCI >1 year duration performed either …
Lung Injury Pathways: Adenosine Receptor 2b Signaling Limits Development Of Ischemic Bronchiolitis Obliterans Organizing Pneumonia, John C. Densmore, Terry R. Schaid, Paul M. Jeziorczak, Meetha Medhora, Said H. Audi, Shraddha Nayak, John Auchampach, Melinda R. Dwinell, Aron M. Geurts, Elizabeth R. Jacobs
Lung Injury Pathways: Adenosine Receptor 2b Signaling Limits Development Of Ischemic Bronchiolitis Obliterans Organizing Pneumonia, John C. Densmore, Terry R. Schaid, Paul M. Jeziorczak, Meetha Medhora, Said H. Audi, Shraddha Nayak, John Auchampach, Melinda R. Dwinell, Aron M. Geurts, Elizabeth R. Jacobs
Biomedical Engineering Faculty Research and Publications
Purpose/Aim of the Study: Adenosine signaling was studied in bronchiolitis obliterans organizing pneumonia (BOOP) resulting from unilateral lung ischemia. Materials and Methods: Ischemia was achieved by either left main pulmonary artery or complete hilar ligation. Sprague–Dawley (SD) rats, Dahl salt sensitive (SS) rats and SS mutant rat strains containing a mutation in the A2B adenosine receptor gene (Adora2b) were studied. Adenosine concentrations were measured in bronchoalveolar lavage (BAL) by HPLC. A2A (A2AAR) and A2B adenosine receptor (A2BAR) mRNA and protein were quantified. Results: Twenty-four hours after unilateral PA …
A Structural And Functional Analysis Of Human Brain Mri With Attention Deficit Hyperactivity Disorder, Arjun A. Watane
A Structural And Functional Analysis Of Human Brain Mri With Attention Deficit Hyperactivity Disorder, Arjun A. Watane
Honors Undergraduate Theses
Attention Deficit Hyperactivity Disorder (ADHD) affects 5-10% of children worldwide. Its effects are mainly behavioral, manifesting in symptoms such as inattention, hyperactivity, and impulsivity. If not monitored and treated, ADHD may adversely affect a child's health, education, and social life. Furthermore, the neurological disorder is currently diagnosed through interviews and opinions of teachers, parents, and physicians. Because this is a subjective method of identifying ADHD, it is easily prone to error and misdiagnosis. Therefore, there is a clear need to develop an objective diagnostic method for ADHD.
The focus of this study is to explore the use of machine language …
Quantifying The Effects Of Hydrostatic Pressure On Fibroblast Growth Factor-2 Binding By The Human Endothelium, Taylor R. Mckenty
Quantifying The Effects Of Hydrostatic Pressure On Fibroblast Growth Factor-2 Binding By The Human Endothelium, Taylor R. Mckenty
Theses and Dissertations--Biomedical Engineering
Fluid pressures regulate endothelial cell (EC) tubulogenic activity involving fibroblast growth factor 2 (FGF-2) and its receptor, FGF receptor 2 (FGFR2). Our lab has recently shown that sustained 20 mmHg hydrostatic pressure (HP) upregulates EC sprout formation in a FGF2-dependent fashion. This upregulation of sprout formation may be due to enhanced FGF-2 / FGFR2 interactions in the presence of 20 mmHg HP. We hypothesize that exposure of ECs to 20 mmHg sustained HP enhances FGF-2 binding kinetics. We used a custom hydrostatic pressure system, immunofluorescence, and FACS to quantify FGF-2 binding by ECs in the absence or presence of a …
Age-Related Differences In The Lumbopelvic Kinematics During The Trunk Motions In The Anatomical Planes, Milad Vazirian
Age-Related Differences In The Lumbopelvic Kinematics During The Trunk Motions In The Anatomical Planes, Milad Vazirian
Theses and Dissertations--Biomedical Engineering
Management and control of the low back pain as an important health problem in the industrial societies necessitates to investigate how the risk of this disease is affected by aging. Since the abnormalities of the lumbopelvic kinematics are related to the existence or risk of low back injuries, the objective of this dissertation was set to find the age-related differences in lumbopelvic kinematics when performing basic trunk motions reaching to range of motion in different anatomical planes.
A cross-sectional study was designed where sixty asymptomatic individuals between 20–70 years old with no confounding health condition, no current or previous highly …
Synthesis And Characterization Of Poly(Simvastatin) - Incorporated Copolymers And Blends For Bone Regeneration, Theodora Asafo-Adjei
Synthesis And Characterization Of Poly(Simvastatin) - Incorporated Copolymers And Blends For Bone Regeneration, Theodora Asafo-Adjei
Theses and Dissertations--Biomedical Engineering
Common biodegradable polyesters such as poly(lactic acid) (PLA), poly(lactic-co-glycolic acid) (PLGA) and poly(ε-caprolactone) (PCL) are used as drug delivery vehicles for tissue regenerative applications. However, they are typically bioinert, with drug loading limitations. Polymerizing the active agent or precursor into its respective biodegradable polymer would control drug loading via molar ratios of drug to initiator used for synthesis. Simvastatin was chosen due to its favorable anti-inflammatory, angiogenic, and osteogenic properties. In addition, its lactone ring lends itself to ring-opening polymerization and, consequently, the synthesis of poly(simvastatin) with controlled simvastatin release.
Simvastatin was first polymerized with a 5kDa methyl-terminated poly(ethylene glycol) …
Validation, Optimization, And Image Processing Of Spiral Cine Dense Magnetic Resonance Imaging For The Quantification Of Left And Right Ventricular Mechanics, Gregory J. Wehner
Validation, Optimization, And Image Processing Of Spiral Cine Dense Magnetic Resonance Imaging For The Quantification Of Left And Right Ventricular Mechanics, Gregory J. Wehner
Theses and Dissertations--Biomedical Engineering
Recent evidence suggests that cardiac mechanics (e.g. cardiac strains) are better measures of heart function compared to common clinical metrics like ejection fraction. However, commonly-used parameters of cardiac mechanics remain limited to just a few measurements averaged over the whole left ventricle. We hypothesized that recent advances in cardiac magnetic resonance imaging (MRI) could be extended to provide measures of cardiac mechanics throughout the left and right ventricles (LV and RV, respectively).
Displacement Encoding with Stimulated Echoes (DENSE) is a cardiac MRI technique that has been validated for measuring LV mechanics at a magnetic field strength of 1.5 T but …
Fractionation And Characterization Of Lignin Streams From Genetically Engineered Switchgrass, Enshi Liu
Fractionation And Characterization Of Lignin Streams From Genetically Engineered Switchgrass, Enshi Liu
Theses and Dissertations--Biosystems and Agricultural Engineering
Development of biomass feedstocks with desirable traits for cost-effective conversion is one of the main focus areas in biofuels research. As suggested by techno-economic analyses, the success of a lignocellulose-based biorefinery largely relies on the utilization of lignin to generate value-added products, i.e. fuels and chemicals. The fate of lignin and its structural/compositional changes during pretreatment have received increasing attention; however, the effect of genetic modification on the fractionation, depolymerization and catalytic upgrading of lignin from genetically engineered plants is not well understood. This study aims to fractionate and characterize the lignin streams from a wild-type and two genetically engineered …
Shape Memory Behavior Of Dense And Porous Niti Alloys Fabricated By Selective Laser Melting, Soheil Saedi
Shape Memory Behavior Of Dense And Porous Niti Alloys Fabricated By Selective Laser Melting, Soheil Saedi
Theses and Dissertations--Mechanical and Aerospace Engineering
Selective Laser Melting (SLM) of Additive Manufacturing is an attractive fabrication method that employs CAD data to selectively melt the metal powder layer by layer via a laser beam and produce a 3D part. This method not only opens a new window in overcoming traditional NiTi fabrication problems but also for producing porous or complex shaped structures. The combination of SLM fabrication advantages with the unique properties of NiTi alloys, such as shape memory effect, superelasticity, high ductility, work output, corrosion, biocompatibility, etc. makes SLM NiTi alloys extremely promising for numerous applications.
The SLM process parameters such as laser power, …
Limb Stabilization In Older Adults And Chronic Stroke Survivors: A Pilot Study, Raymond C. Doudlah, Robert A. Scheidt, Aaron J. Suminski
Limb Stabilization In Older Adults And Chronic Stroke Survivors: A Pilot Study, Raymond C. Doudlah, Robert A. Scheidt, Aaron J. Suminski
Biomedical Engineering Faculty Research and Publications
Visual fidelity influences many aspects of daily living, including stabilizing wrist movements against environmental perturbations. Here, we present a pilot investigation to determine how visual feedback impacts wrist stabilization for populations with age related declines in motor function and chronic stroke. To quantify these interactions, behavioral performance and local brain activation were observed during a task requiring stabilization of the wrist against constant and stochastic extensor torque perturbations. All subjects were better able to stabilize their wrist when veridical visual feedback of their limb was provided. Examination of the neural activation maps in the Control and Aging populations revealed patterns …
How A Diverse Research Ecosystem Has Generated New Rehabilitation Technologies: Review Of Nidilrr’S Rehabilitation Engineering Research Centers, David J. Reinkensmeyer, Sarah Blackstone, Cathy Bodine, John Brabyn, David Brienza, Kevin Caves, Frank Deruyter, Edmund Durfee, Stefania Fatone, Geoff Fernie, Steven Gard, Patricia Karg, Todd A. Kuiken, Gerald F. Harris, Mike Jones, Yue Li, Jordana Maisel, Michael Mccue, Michelle A. Meade, Helena Mitchell, Tracy L. Mitzner, James L. Patton, Philip S. Requejo, James H. Rimmer, Wendy A. Rogers, W. Zev Rymer, Jon A. Sanford, Lawrence Schneider, Levin Sliker, Stephen Sprigle, Aaron Steinfeld, Edward Steinfeld, Gregg Vanderheiden, Carolee Winstein, Li-Qun Zhang, Thomas Corfman
How A Diverse Research Ecosystem Has Generated New Rehabilitation Technologies: Review Of Nidilrr’S Rehabilitation Engineering Research Centers, David J. Reinkensmeyer, Sarah Blackstone, Cathy Bodine, John Brabyn, David Brienza, Kevin Caves, Frank Deruyter, Edmund Durfee, Stefania Fatone, Geoff Fernie, Steven Gard, Patricia Karg, Todd A. Kuiken, Gerald F. Harris, Mike Jones, Yue Li, Jordana Maisel, Michael Mccue, Michelle A. Meade, Helena Mitchell, Tracy L. Mitzner, James L. Patton, Philip S. Requejo, James H. Rimmer, Wendy A. Rogers, W. Zev Rymer, Jon A. Sanford, Lawrence Schneider, Levin Sliker, Stephen Sprigle, Aaron Steinfeld, Edward Steinfeld, Gregg Vanderheiden, Carolee Winstein, Li-Qun Zhang, Thomas Corfman
Biomedical Engineering Faculty Research and Publications
Over 50 million United States citizens (1 in 6 people in the US) have a developmental, acquired, or degenerative disability. The average US citizen can expect to live 20% of his or her life with a disability. Rehabilitation technologies play a major role in improving the quality of life for people with a disability, yet widespread and highly challenging needs remain. Within the US, a major effort aimed at the creation and evaluation of rehabilitation technology has been the Rehabilitation Engineering Research Centers (RERCs) sponsored by the National Institute on Disability, Independent Living, and Rehabilitation Research. As envisioned at their …
A Stationary Camera For Use With Other Implantable Medical Devices, Ariane Garrett
A Stationary Camera For Use With Other Implantable Medical Devices, Ariane Garrett
Holster Scholar Projects
I designed an optical system for analysis of implantable devices. The final system consists of a 3mm double convex lens that focuses a light spot onto a tissue or implantable medical device. This light spot can then provide feedback on the movement of flow through a device or the development of tissue on the device, although my project focused solely on the flow application. The light spot is generated by an LED and directed using a half mirror. It is then focused using a ball lens, fiber optic, and the double convex lens. With this system the generated light spot …
A Wireless, Passive Sensor For Measuring Temperature At Orthopedic Implant Sites For Early Diagnosis Of Infections, Salil Sidharthan Karipott
A Wireless, Passive Sensor For Measuring Temperature At Orthopedic Implant Sites For Early Diagnosis Of Infections, Salil Sidharthan Karipott
Dissertations, Master's Theses and Master's Reports
Sensorized implants with embedded wireless, passive temperature sensors were developed for early detection of implant-associated infections. The operation principle of the sensor is based on the hypothesis that infections can lead to an increase in local temperature prior to the rise of body temperature. The sensor was an inductive capacitive (LC) circuit that has been used for monitoring of different parameters wirelessly, often in difficult to access environments. The sensor was fabricated on to an interference screw, which is used for tendon and ligament reconstruction surgeries. In this project, a sensorized interference screw was designed and fabricated by accommodating an …
Implantable Wireless Sensor Networks: Application To Measuring Temperature For In Vivo Detection Of Infections, Praharsh Madappaly Veetil
Implantable Wireless Sensor Networks: Application To Measuring Temperature For In Vivo Detection Of Infections, Praharsh Madappaly Veetil
Dissertations, Master's Theses and Master's Reports
It is has been proven that infection in the body cause a local temperature increase due to localized inflammation. Therefore, a method to provide early diagnostic or long-term tracking of this infection will provide great benefits to patients with diabetic foot ulcers or sickle cell disease, and those receiving hemodialysis where they suffer from a weakened immune system. The goal of this project is to develop an implantable wireless temperature sensor based on a wireless sensor network system for monitoring infections in situ. The analog signals from the thermistors are digitized and wirelessly transmitted to a computer with an ez430-rf2500 …
A 3d Biomimetic Scaffold Using Electrospinning For Tissue Engineering Applications, Samerender Nagam Hanumantharao
A 3d Biomimetic Scaffold Using Electrospinning For Tissue Engineering Applications, Samerender Nagam Hanumantharao
Dissertations, Master's Theses and Master's Reports
Electrospinning holds great promise for designing functional 3D biomimetic scaffolds for tissue engineering applications. The technique allows for the reproducible fabrication of 3D scaffolds with control over the porosity and thickness. In this work, a novel method for the synthesis of a 3D electroactive scaffold using electrospinning from polycaprolactone (PCL), Polyvinylidene Fluoride (PVDF) and Polyaniline (PANI) is reported. Additional scaffolds involving different morphologies of PCL, PCL-PVDF and PCL-PANI-PVDF were also fabricated and evaluated. The scaffolds were characterized using electron microscopy to visualize the morphologies. Infrared spectroscopy was used to confirm the presence of polymers and their respective phases in the …