Engineering Commons^™

Design Of Microporous Membranes For The Development Of Brain-On-Chip Devices, Andre Figueroa Milla

Biomedical Engineering Undergraduate Honors Theses

Traumatic brain injuries (TBIs) are a major global health concern that have an economic impact of $60 billion in the United States in related costs annually. Developing drugs for TBI treatment is an approach that currently faces limitations involving the permeability of the blood-brain barrier (BBB). The BBB naturally limits molecules from reaching the brain as a protective mechanism against disease, acting as a barrier during drug delivery. Understanding the BBB mechanically and chemically following a TBI could potentially assist future studies to alleviate the symptoms and long-term effects of TBI by pharmaceuticals. The Mechanobiology and Soft Materials Laboratory (MSML) …

A Bioinstrumentation Active Learning Educational Module: The Design Of A Working Temperature Sensor Using A Ntc Thermistor, Baylor Bush

Biomedical Engineering Undergraduate Honors Theses

The Department of Biomedical Engineering at the University of Arkansas has continued to develop over the years, with more students enrolling in the program each year. Within the first biomedical engineering course, Introduction to Biomedical Engineering, various topics are introduced to students, and the topic of bioinstrumentation has been one of the most complex and difficult topics for students to comprehend through just a few lectures. In order to aid students in grasping these intricate concepts, an active learning module was developed in which students can work in groups to build a simple thermistor circuit as a temperature sensor. The …

Autofluorescence To Study The Effects Of Acid Concentration On Cellular Metabolism In Vitro, Robin L. Raley

Chemistry & Biochemistry Undergraduate Honors Theses

Ultraviolet (UV) radiation-induced sunburns and their accompanying afflictions are a growing public health concern in the United States. There is a need for techniques that can accurately and non-invasively characterize the physiology of sunburned skin tissue directly after UV-damage and applying a topical skin treatment to relieve pain and promote healing. Two-photon excited fluorescence (TPEF) microscopy and fluorescence lifetime imaging (FLIM) can be used to investigate metabolic processes in live cells through endogenous fluorescence of the cofactors, NADH and FAD. These methods employ the optical redox ratio of FAD/(NADH+FAD), mean NADH lifetime, and the separation of the free and bound …

Comparing The Effects Of Fibroblast Growth Factors On Growth Rate Of Human Fibroblast Cell Lines, Tasha Repella

Biomedical Engineering Undergraduate Honors Theses

Numerous studies have demonstrated the usefulness of growth factors in medium formulations to promote proliferation and viability of human fibroblasts in laboratory settings. However, due to the differences in the source and age of fibroblasts, the ability of growth factors like hFGF1 to promote proliferation varies. Equally difficult is the ability of hFGF1 to promote proliferation of diseased fibroblasts due to complexities associated with specific mitochondrial diseases. In this context, we decided to evaluate the potential for novel hyper stable growth factors super hFGF and hFGF1 (shFGF and hFGF1 respectively), to contribute to proliferation of different normal and diseased fibroblasts. …

Development Of A Model For Accelerated Fatigue Testing In Venous Valves, Olga Brazhkina

Biomedical Engineering Undergraduate Honors Theses

Malfunctioning venous cause issues ranging from cosmetic to life threatening situations for millions of people in the U.S. (1). Venous valve bioprosthetics often fail due to a loss in leaflet tissue flexibility following chemical fixation of donor tissue (2). A viable solution for testing venous valves prior to and post chemical fixation is in high demand for the development of a more durable prosthetic replacement. As a result, this research aims to create a fatigue apparatus that provides a means to model the durability of venous valves. The design criteria for this project included modeling physiological conditions in an accelerated …

Modeling And Validation Of Tissue Optical Properties In The Photon Transport Regime, Katelyn Heath

Biomedical Engineering Undergraduate Honors Theses

Early detection of changes in epithelial cells, such as the development of neoplastic formations seen in epithelial dysplasia, can indicate regions of the epithelial tissue that are at a high risk for cancerous formation. Using concepts from diffuse reflectance spectroscopy, a Monte Carlo model was developed to predict the reflectance measured by a detector at a small source-detector separation on a microendoscope. The Monte Carlo results were then used to calculate a mathematical relationship between the reflectance and distance that can be used to determine optical properties in a tissue sample. This model was validated with liquid phantoms of specified …

Conceptualization And Fabrication Of A Bioinspired Mobile Robot Actuated By Shape Memory Alloy Springs, Lietsel Richardson

Electronic Theses and Dissertations

This work is an experimental study and fabrication of design concepts to validate the feasibility of smart materials and their applications in bio-inspired robotics. Shape-Memory Alloy (SMA) springs are selected as the smart material actuators of interest to achieve locomotion in the proposed mobile robot. Based on a previous design of the robot, this work focuses on both implementing a new locomotion concept and reducing size and weight of the previous design, both using SMA based actuators. Objectives are met in consideration of the conceptual mechanics of circular robot locomotion. The first prototype is a variation of the original design. …

Fluctuations In Walking Speeds And Spatiotemporal Gait Parameters When Walking On A Self-Paced Treadmill At Level, Incline, And Decline Slopes, Cesar Castano

Electronic Theses and Dissertations

On a daily basis, humans walk over a variety of terrains. Studies have shown that spatiotemporal gait parameters, such as stride length, stride frequency, stride variability, etc., change when humans walk down a decline and up an incline compared to level ground. However, these studies have been limited to using fixed speed treadmills or analyzing a small number of strides when conducted over ground. Thus, there is a need to investigate the fluctuations in spatiotemporal gait parameters of humans walking at their self-selected speed, which requires recording hundreds of strides. Here we hypothesized that subjects will walk with a slower …

The Effects Of Bone Morphogenic Protein 2 On The Viability And Proliferation Of Dental Pulp Stem Cell Isolates, Joseph Cinelli

UNLV Theses, Dissertations, Professional Papers, and Capstones

Growth factor is an umbrella term used to describe a signaling molecule present in organisms that serves the purpose of influencing a stimulatory or inhibitory response from the target cell it acts on. Growth factors are categorized and classified by the types of tissues they act on and the cellular responses they illicit. For example, there are growth factors that act primarily in connective tissue on fibroblasts and they are aptly classified as the fibroblast growth factor family. Similarly, there is another family of growth factors that act on bone forming cells, among others, and they are known as bone …

The Development Of A Viscoelastic Ellipsoidal Model For Use In Measuring Plantar Tissue Material Properties During Walking, Jessica Lee Deberardinis

UNLV Theses, Dissertations, Professional Papers, and Capstones

Introduction: The mechanical characteristics of the plantar tissues during walking is not well understood as most of the current research focuses on testing specific plantar regions in cadavers or while the feet of the participants are raised. In this work, it is hypothesized that a viscoelastic geometric ellipsoid model used to assess multiple structures of the foot would be accurate and robust. This model would be participant-specific and applicable to the entire stance phase of gait.

Methods: The proposed viscoelastic ellipsoid model would represent several key anatomical areas: Heel, Posterior Midfoot, Anterior Midfoot, Metatarsals 1-2, Metatarsals 3-5, Toe 1, Toe …

The Affective Perceptual Model: Enhancing Communication Quality For Persons With Pimd, Jadin Tredup

UNLV Theses, Dissertations, Professional Papers, and Capstones

Methods for prolonged compassionate care for persons with Profound Intellectual and Multiple Disabilities (PIMD) require a rotating cast of import people in the subjects life in order to facilitate interaction with the external environment. As subjects continue to age, dependency on these people increases with complexity of communications while the quality of communication decreases. It is theorized that a machine learning (ML) system could replicate the attuning process and replace these people to promote independence. This thesis extends this idea to develop a conceptual and formal model and system prototype.

The main contributions of this thesis are: (1) proposal of …

Ecological Co2 Flux Of A Green Roof Ecosystem And A Typical Grassland Ecosystem, Madeline Oxner

Biological and Agricultural Engineering Undergraduate Honors Theses

The Hillside Auditorium Green Roof is a low impact development feature on the University of Arkansas campus. It retains storm water and allows plants living on the roof to take up and transpire the water. Green roofs work to mimic natural ecosystems in urban environments. A key property is ecosystem respiration, which plays a large role in the global carbon cycle and is an important biologic activity indicator. The ecosystem respiration of Hillside Auditorium Green Roof was compared to a typical grassland ecosystem at the University of Arkansas farm to determine how closely the green roof is able to mimic …

Assessing Commonly Used Methods In Measuring Yield Of Cellulose Nanocrystals, Marilyn Pharr

Biological and Agricultural Engineering Undergraduate Honors Theses

Cellulose is a ubiquitous, renewable biopolymer found in plants that can be broken down to isolate cellulose nanocrystals (CNCs). CNCs have been utilized in various applications that include biomedical technology, structural composites, and barrier films because of their unique mechanical, optical, and physicochemical properties. CNCs can be produced by a variety of approaches from cellulosic materials; however, strong acid hydrolysis is the most common and effective technique as it results in stable colloidal suspensions. Existing literature reveals a wide range of CNC yields, depending on the production process, raw material used, and the method of yield estimation. The yields of …

Molecular Investigation Of The Intestinal Barrier In Health And Disease, Santita Ebangwese

Renée Crown University Honors Thesis Projects - All

The intestinal epithelial barrier contributes to the absorption of nutrients and in maintaining homeostasis. Several intestinal disorders such as Crohn’s disease and Ulcerative Colitis show common pathological features corresponding to a decreased intestinal epithelial barrier function, which makes it imperative to investigate the functional units of the intestinal barriers formed by complex protein interfaces called the tight junctions. Among the diverse set of transmembrane proteins involved in the formation of tight junctions, the mal-distribution of claudin family of proteins show direct correlation to compromised barrier functioning. Interestingly, claudin-3 expression reduces drastically in compromised barriers, while an increased expression of claudin-23 …

Predictive Modeling Of Fate And Transport Of Three Prevalent Contaminants In Midwest Agroecosystem Surface Waters: Nitrate-N, Atrazine, And Escherichia Coli, Samuel Hansen

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

The majority of streams and rivers in the United States (U.S.) are ecologically impaired, or threatened by anthropogenic stressors. Recent reports have found atrazine in drinking water to be associated with increased birth defects and incidences of Non-Hodgkin’s Lymphoma, with higher levels of significance from exposure to both atrazine and nitrate-N. In contrast, recent illnesses from E. coli contaminating vegetables that originated from irrigation water has increased awareness of identifying sources of E. coli entering irrigation reservoirs.

Methods to accurately predict atrazine and E. coli occurrence and potential sources in waterways continue to limit the identifying appropriate and effective prevention …

Methods To Remotely Eliminate Biofilm From Medical Implants Using 2.4 Ghz Microwaves, Brett Glenn

Mechanical Engineering Undergraduate Honors Theses

Infections associated with biofilm growth are usually challenging to eradicate due to their high tolerance toward antibiotics [11, 12]. Biofilms often form on the inert surfaces of medically implanted devices [13]. No matter the sophistication, microbial infections can develop on all medical devices and tissue engineering constructs [12]. Related infections lead to 2 million cases annually in the U.S., costing the healthcare system over $5 billion in additional healthcare expenses [12].

Novel solutions to biofilm’s microbial colonization span the spectrum of engineering and science disciplines. Yet a practical solution still does not exist. The research presented here will explore a …

Bio-Desalination Of Brackish And Seawater Using Halophytic Algae, Endalkachew Sahle-Demessie, Ashraf Aly Hassan, Amro El Badawy

Department of Civil and Environmental Engineering: Faculty Publications

Global demand for water is rising. A sustainable and energy efficient approach is needed to desalinate brackish sources for agricultural and municipal water use. Genetic variation among two algae species, Scenedesmus species (S. sp.) and Chlorella vulgaris (C. vulgaris), in their tolerance and uptake of salt (NaCl) was examined for potential bio-desalination of brackish water. Salt-tolerant hyper-accumulators were evaluated in a batch photobioreactors over salinity concentration ranging from 2 g/L to 20 g/L and different nutrient composition for their growth rate and salt-uptake. During algae growth phase, the doubling time varied between 0.63 and 1.81 days for S …

Designing An In Vitro Mitral Valve Mounting And Testing System For Micro Ct Imaging, Marinna Tadros

Biomedical Engineering Undergraduate Honors Theses

Five million people in the US are diagnosed with valvular disease, of which mitral valve disease is one of the most common. Computational models are informed by high resolution images and have the potential to aid in diagnosing and establishing surgical plans to treat mitral valve diseases. Existing methods using 7T MRI imaging have limitations such as small bore diameter, long imaging times and difficulty in maintaining trans-mitral fluid pressure throughout the scan. Imaging with Micro CT allows for efficient scan times and eliminates bore size constraints which allows for imaging more sizes and types of MVs. There is a …

Vector Flow Imaging In Pediatric Cardiology - Extracting And Validating Data, Mason Belue

Biomedical Engineering Undergraduate Honors Theses

In the field of bedside cardiac diagnostic imaging, Doppler Ultrasound (DU) is the gold standard for diagnosing heart conditions. The largest benefit of DU is its ability to noninvasively image cardiac flow and allow the estimation of blood velocity and quantification of anatomical disease. However, to get correct velocity estimation, the position of the transducer in relation to the flow field needs to be known. This is the problem of angle/direction dependency and limits DUs accuracy when imaging in areas where perfect alignment or exact position of the transducer in relation to flow field is not possible or known, such …

Hrv - Ecg Generator: Software For Testing Heart Rate Variability Detection, Matthew Joseph Pogorelec

Theses and Dissertations

Heart rate variability (HRV) has been shown to serve as an effective diagnostic and prognostic tool in a variety of clinical applications, including for patients who have suffered from myocardial infarction, sepsis and liver cirrhosis. There currently exist a variety of devices and software to quantify HRV based on RR interval series collected from ECG data. However, as the uses for HRV expand, a greater variety of devices for different applications are being designed and developed. Thus, it is useful to have available a method for efficiently testing preliminary software. The HRV/ECG Generator software is designed to build both an …

The 3d Scaffold Design Of De Novo Anterior Cruciate Ligament Graft, Dominique Angibeau

Honors Capstones

No abstract provided.

The Role Of Gene Expression Noise In Mammalian Cell Survival, Kevin Farquhar

Dissertations and Theses (Open Access)

Drug resistance and metastasis remain obstacles to effective cancer treatment. A major challenge contributing to this problem is cellular heterogeneity. Even in the same environment, cells with identical genomes can display cell-to-cell differences in gene expression, also known as gene expression noise. Gene expression noise can vary in magnitude in a population or in fluctuation time scales, which is influenced by gene regulatory networks.

Currently, it is unclear how gene expression noise from gene regulatory networks contributes to drug survival outcomes in mammalian cells. An isogenic cell line with a noise-modulating genetic system tuned to the same mean is required. …

Effects Of Ambient And Laser Light On Water Evaporation From The Surface Of Polyurethane Swabs Doped With Surfactant, Collin Campbell

Chemical Engineering Undergraduate Honors Theses

Polyurethane swabs are a common instrument for environmental sampling in the food, medical, and forensic fields due to their high recovery of organisms like viruses, spores, and bacteria. For sampling microbes in food and medical facilities, storage of the collected samples occurs under the absence of light to promote growth for more accurate testing. In the forensic fields, microbial growth results in sample contamination so the inhibition of this growth requires the drying of the swabs. This work studies the evaporation rates of water from polyurethane swabs under zero watt incident light, 30 W fluorescent bulb, 50 mW 532 nm …

On-Demand Label Production, Robert A. Zimmerman

Master's Theses

The production and approval process for the various labels used in clinical trials wastes significant time and resources through the need to outsource label production or rely on large reams of pre-cut label stock for each revision throughout the process. An in-house, on-demand label printing and cutting system is a potential remedy to this waste. Previous work by Cheadle et al. resulted in a functional electomechanical prototype of the label cutting aspect of this research, capable of rudimentary linear cuts. In this continued research, emphasis was placed on improved label cutting capabilities and creating PC control software for label design. …

3d Printing A Microfluidic Chip Capable Of Droplet Emulsion Using Ninjaflex Filament, Robert Andrews

Mechanical Engineering Undergraduate Honors Theses

This paper details an investigation into methods and designs of 3D printing a microfluidic system capable of droplet emulsion using NinjaFlex filament. The specific field in which this paper’s experiment is rooted is dubbed “BioMEMS,” short for bio microelectromechanical systems. One prominent research area in BioMEMS is developing a “lab on a chip.” Essentially, the goal is to miniaturize common lab processes to the micro scale, rendering it possible to include these processes in a small chip. Reducing necessary sample sizes, shortening the reaction times of lab processes, and increasing mobility of lab processes can all be realized through microfluidic …

Role Of Local Renin-Angiotensin System In Potentiating Early Calcific Aortic Valve Disease, Jessica Perez

Graduate Theses and Dissertations

Angiotensin-II (Ang-II), a peptide hormone, is a potent vasoconstrictor and cell mitogen. It has been implicated in the development of hypertension as well as atherosclerosis. Recent work has shown that sclerotic aortic valves possess expression of angiotensin type I receptor (AT-1R) and angiotensin converting enzyme (ACE), suggesting altered angiotensin signaling during disease. The role of altered angiotensin signaling on aortic valve mechanics, however, is not clearly understood. We seek to understand the direct effects of the renin angiotensin signaling (RAS) system on the biological and biomechanical properties of aortic valve tissue and develop a finite constitutive model that mimics the …

Cell Imaging And Data Analysis For Biomaterial-Mammalian Co-Cultures, Jefferson Pontsler

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Microscopic bioimaging is a useful approach to study cell-biomaterial interactions which are vital to the biomedical application of biomaterials. Through microscopic imaging, numerous cellular responses, such as proliferation, uptake, and death, can be recorded, characterized and analyzed.

In this thesis, I first provided basic introductions to the imaging techniques and analysis tools, especially those that are highly relevant to the studies of biomaterials and cell interactions. I also detailed the adaptation of these techniques and tools in the application of two specific research projects in biomaterials, with special focuses on the imaging and analysis.

The first project assessed the subtle …

Hydrodeoxygenation Of Pinyon-Juniper Catalytic Pyrolysis Oil, Hossein Jahromi

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Catalytic hydrodeoxygenation (HDO), is an effective process to convert oxygenated compounds to hydrocarbons. This process is widely used for improving the negative properties of biomass-derived pyrolysis oils (bio-oils) such as high acidity, poor stability, and low heating value. During this process oxygen is removed from the bio-oil in the form of water, thus the liquid product of HDO process consists of aqueous phase and hydrocarbon phase that can be easily separated. Synthesis of efficient HDO catalyst has been a major challenge in the field of bio-oil upgrading. Red mud, which is an alkaline waste from alumina industry was used to …

In Vitro Simulation Of Microgravity Induced Muscle Loss Successfully Increases Expression Of Key In Vivo Atrophy Markers, Charles P. Harding

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Muscle loss from lack of activity is a serious issue for immobilized patients on Earth and in human spaceflight, where the low gravity environment prevents normal muscle activity. Simulating muscle loss in cultured cells is an important step in understanding how this condition occurs. This work evaluates different means of simulating muscle loss and selects the one that most closely mimics the cellular responses seen in animals and humans.

To simulate the microgravity environment of spaceflight, mouse skeletal muscle cells were grown in a rotary cell culture system (RCCS). Growing the cells within a natural gelled substrate was compared against …

Effect Of Physical Stimuli On Angiogenic Factor Expression In Retinal Pigment Epithelial Cells, Farhad Farjood

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Age-related macular degeneration (AMD) is a major cause of blindness in adults. Abnormal growth of blood vessels in the eye during the course of AMD causes damage to the retina, resulting in irreversible blindness. The goal of this research was to determine whether physical pressure on retinal cells can contribute to the increased blood vessel formation. To replicate the tears in the cell layers, a micropatterning method was used as a means of detaching cells from each other. Two new devices were also developed to mimic slow and fast increases in mechanical pressure on cell layers of the eye. After …