Engineering Commons^™

The Imaginary In Architecture: The Conceptual Structure Of The Imaginary And Its Manifestations In Architectural Text, Noora Ghadir Hlail, Abbas Ali Hamza Al Greiza

Al-Esraa University College Journal for Engineering Sciences

This study explores the concept of the imaginary as a collective cognitive and cultural structure that shapes symbolic reality through images, myths, and deeply rooted symbols in collective memory. The research applies this concept within the field of architecture, aiming to understand how the imaginary is embodied in architectural texts as symbolic carriers of identity and cultural meaning. Adopting a descriptive-analytical methodology, the study develops a theoretical framework comprising key components—preconditions, mechanisms, and traits of the imaginary—and applies it to two selected case studies: the General Secretariat of the Iraqi Council of Ministers and the Louvre Abu Dhabi Museum. The …

Generative Ai For Method Development In Analytical Chemistry: A New Paradigm In Experimental Design And Optimization, Yasir Fathi Mahmood

Al-Esraa University College Journal for Engineering Sciences

The fast development of artificial intelligence (AI), especially generative AI models, is changing the environment of analytical chemistry. As classical method generation in analytical methods relies on manual trial-and-error methodology as well as statistical methods, generative AI is a new paradigm with automated generation of experimental methodology and optimization. In this paper, the authors discuss the use of generative AI-based technologies, including large language models (LLMs) and neural network-based generators, to create new, efficient, and customized methods of analysis. The paper examines existing applications, technology frameworks, and issues and offers a roadmap with regards to the future incorporation of generative …

Numerical Modeling And Experimental Validation Of A High-Temperature Latent Heat Thermal Energy Storage System Using Metallic Phase Change Materials For Concentrated Solar Power Applications, Fouad Hashim Sharhan

Al-Esraa University College Journal for Engineering Sciences

To ensure reliable performance for the power-block of CSP plants, high power density and near-isothermal discharge must be achieved. A robust means of achieving this is through thermal energy storage (TES). High temperature latent heat storage (LHS) with phase change materials (PCMs) can serve these purposes, however the conventional salts used in PCMs typically suffer from low thermal conductivity that limits power density and increases energy storage charging/discharging times. This manuscript investigates ways to address these limitations using high temperature metallic phase change materials (MPCMs) while also developing a validated numerical framework to aid in their design. To this end, …

Thermal Performance Evaluation Of Solar Cooling Systems For Educational Facilities In Baghdad, Yasser Alawi Mohammed Attia Al-Jubouri

Al-Esraa University College Journal for Engineering Sciences

Schools in Baghdad also suffer from poor thermal comfort, which is a common problem in high-temperature and low-humidity arid climates such as that of the city, where using cooling devices leads to a large energy demand and overloads on the national power grid. Such study offers a thorough assessment of the thermal performance of solar-based cooling systems in an efficient manner to be suitable for educational buildings in Baghdad. The analysis is centred on a solar thermal cooling system with absorption as the heat interaction medium, and an experimental characterisation and mathematical simulation itself are performed. A pilot installation, consisting …

Uji Kelayakan Teknis Dan Performa Auvest: Rompi Pendingin Otomatis Berbasis Wearable Thermoelectric Cooler Untuk Mitigasi Risiko Heat Stress, Muchammad Adam Wildan, Amelia Avril Rayhana, Nadia Hanifan Nabila, Bian Shabri Putri Irwanto

National Journal of Occupational Health and Safety

Heat stress is a serious threat to construction workers that can reduce productivity and even threaten lives. Existing cooling vest innovations still have limitations, such as weight, manual systems, and the risk of leakage. This study aims to analyze the effectiveness of the Automatic Vest (AUVEST), an automatic cooling vest based on Wearable Thermoelectric Cooler and the Internet of Things (IoT), in preventing the risk of heat stress. The method used is experimental with trials on one construction worker in indoor and outdoor environments. AUVEST is equipped with temperature sensors (DS18B20, TMP102) and humidity (DHT11), whose data is processed by …

Curing Duration Optimization To Reduce Shrinkage Cracking In One-Part Alkali-Activated Slag Concrete, A. Sadrmomtazi, H. Zanganeh

Journal of Sustainable Construction Materials and Technologies

The consequences of inadequate curing on one-part alkali-activated slag concrete (O-AAS) performance relative to ordinary Portland cement concrete (OPCC) have been investigated in this research. Prior to exposure to unsaturated conditions, samples underwent initial moist curing for durations ranging from 24 hours to one year. The testing program included compressive strength evaluation, chloride ion transport analysis, and measurement of free and restrained shrinkage. In addition, cylindrical cores were extracted from concrete columns to assess internal strength and chloride penetration resistance. Under unsaturated exposure, O-AAS exhibited a strength-aging phenomenon, with up to a 37% decrease in compressive strength over 360 days, …

Laboratory Investigation And Numerical Modelling Effect Of Carbon Nanotubes On Hot Mix Asphalt Permanent Displacement, Sepehr Saedi, Auwal Usman Nadada

Journal of Sustainable Construction Materials and Technologies

One of the primary causes of asphalt pavement deterioration is rutting; in contrast, one of the most effective methods to address this type of damage is the use of additives and quality evaluation during the design stages. In this research, laboratory testing and modeling using Abaqus software were employed to validate the laboratory results and predict and assess the potential for rutting. Carbon nanotubes (CNTs) were selected as an additive due to their exceptional mechanical properties and molecular interactions with bitumen. These nanotubes were used to modify the bitumen for the preparation of laboratory samples. The laboratory results from the …

Influence Of Early Microwave Curing On Performance Of Slag-Based Geopolymer Mortars, Ahmet Taşdemı̇R, Abdulkadir Çevı̇K

Journal of Sustainable Construction Materials and Technologies

In this article, an experimental study was conducted to examine the effect of curing time and microwave power on the compressive strength of early microwave-cured slag based geopolymers. Geopolymers have the potential to serve as an environmentally friendly substitute for cement-based building materials, and the use of microwave curing to geopolymers holds the promise of substantial strength improvement. Different microwave curing energies (300 - 800 Watts) were utilized at varying durations (10 - 60 minutes) on demoulded mortar specimens after one day. After that, compressive strength tests were conducted on both the cured and uncured specimens at three different ages: …

Towards Computational Methods In Medical Data Analysis: From Speech And Text To Imaging, Kristin Qi

Graduate Doctoral Dissertations

Early detection of cognitive decline and efficient medical image analysis remain critical challenges in healthcare. Traditional clinical assessments are infrequent and resource-intensive, while everyday speech data and unlabeled medical images remain largely unexploited. This dissertation develops computational methods integrating machine learning and artificial intelligence across speech, text, and imaging modalities to address challenges in medical data processing. For cognitive monitoring, this work first introduces methods using voice assistant systems to collect longitudinal speech data in home environments, demonstrating that incorporating historical session patterns significantly enhances detection of mild cognitive impairment. Building on this foundation, a framework combining large language model-driven …

Comprehensive Mechatronic Design Methodology For 6-Dof Stationary Lower Limb Rehabilitation Exoskeleton Robot With Safety-Integrated Control Architecture, Javlonbek Rakhmatillaev Mr., Nodirbek Kimsanboyev Mr., Umidjon Takabaev Mr., Zafar Juraev3 Dr.

Chemical Technology, Control and Management

This paper presents the mechatronic design of a proposed six-degree-of-freedom (6-DOF) stationary lower limb rehabilitation exoskeleton (SLLRE) robot, developed through a comprehensive mechatronic design methodology that includes mechanical design, actuator and sensor selection, and the development of a control structure based on a safety-oriented control approach. The proposed 6-DOF SLLRE mechanical design introduces a comprehensive mechanical structure comprising bilateral hip, knee, and ankle joints, degrees of freedom, joint ranges of motion, human parameters for rehabilitation training, as well as the frames and structural elements of the proposed system. Furthermore, the selection of appropriate sensors, actuators, and control architecture for the …

Development And Evaluation Of A Smart Vacuum-Assisted Suspension System For Transtibial Prostheses, Zahraa Kathem Ali, Wajdi Sadik Aboud

Al-Bahir

A prosthetic socket is essential for achieving comfort, gait symmetry, and overall satisfaction for amputees. Effective suspension systems are crucial for securely attaching prostheses, thereby optimizing comfort, functional performance, and long-term limb health. This study aimed to develop and evaluate an intelligent vacuum-assisted suspension system for transtibial prostheses to improve socket fit, gait stability, and reduce residual limb movement. The system integrates force-sensitive resistors (FSRs) and an inertial measurement unit (MPU6050) with accelerometer and gyroscope sensors, continuously monitoring interface pressure and limb motion. Real-time data from these sensors dynamically adjusts vacuum pressure based on the user's gait pattern .Quantitative gait …

Visualizing The Effect Of Process Pause On Virus Entrapment During Constant Flux Virus Filtration, Wenbo Xu, Xianghong Qian, Hironobu Shirataki, Daniel Straus, Sumith Ranil Wickramasinghe

Biomedical Engineering Faculty Publications and Presentations

Virus filtration is an essential unit operation used to validate clearance of adventitious virus during the manufacture of biopharmaceutical products such as monoclonal antibodies. Obtaining at least a 10,000-fold reduction in virus particles in the permeate is challenging as monoclonal antibodies are about half the size of the virus particles. Minute virus of mice, FDA-recommended model adventitious virus, was labeled with a fluorescent dye. Laser scanning confocal microscopy was used to determine the location of virus entrapment within the virus filtration membrane. Three different hollow fiber membranes made of regenerated cellulose and polyvinylidene fluoride were tested. Feed streams consisted of …

Use Of Alaçatı Stone Aggregate In Conventional And Self-Consolidating Concretes, Tahir Kemal Erdem

Journal of Sustainable Construction Materials and Technologies

Alaçatı stone or Alapietra stone is widely used mostly for building cladding. However, its production and use in the construction sites generate high amounts of waste (debris), causing environmental pollution in Çeşme which is a touristic district. This study investigated the reuse of Alaçatı stone as lightweight aggregate (LWA) in both conventional and self-consolidating concrete (SCC) mixtures. The concretes were prepared to have three different water-to-cement ratios (w/c), which were 0.38, 0.42 and 0.48. For each w/c, a conventional concrete mixture and two SCC mixtures with 60 or 70 cm slump flow were produced by varying the superplasticizer SP content. …

A Decision Support Model For Building Material And Component Reuse In The Context Of Circular Buildings, Havva Aksel

Journal of Sustainable Construction Materials and Technologies

Construction activities cause significant environmental impacts such as waste generation, pollution, resource consumption, and land use, which are expected to increase with global construction demands. To mitigate these environmental problems, the circular building occurs as an emerging concept depending on in the circular economy, which aims to minimize waste and redefine the “end-of-life” concept by reducing, reusing, recycling, and recovering materials. The reuse of building materials and components (BMCs) from existing structures represents a crucial strategy for achieving circularity in the built environment. Within this framework, design plays a key role. However, designing with reclaimed BMCs remains complex due to …

Analyzing Ethics Education Strategies In Biomedical Engineering Programs, Sanjana Prashanth

The Journal of Purdue Undergraduate Research

No abstract provided.

Validation Of Innovative Method Of Murine Vertebral Compression Testing, Sarah Staller

The Journal of Purdue Undergraduate Research

Murine vertebral compression testing is a common technique to quantify trabecular bone biomechanics. Having a precise method of vertebral compression is important for aiding researchers in making clinically relevant discoveries in musculoskeletal research. While many methods exist in literature, there has yet to be established a universal protocol for this procedure. Many challenges exist in vertebral compression, such as the irregular shape of the vertebral body (trabecular region of interest), uneven endplate surface morphology, and surrounding cortical processes. Therefore, the aim of this study was to develop a new method of vertebral compression that accounts for these factors and to …

The Automation Of Lamp Biomolecular Assays Using The Eppendorf Epmotion™ 5075 Robotic Pipettor, Shamalaa Sathiasealan

The Journal of Purdue Undergraduate Research

Loop-mediated isothermal amplification (LAMP) is a nucleic acid amplification technique known for its specificity and efficiency in less controlled environments than laboratories. Designing novel LAMP reagents requires strict contamination control, and unlike the more commonly automated polymerase chain reaction, LAMP’s heightened sensitivity poses unique challenges to automation. To address this, we optimized automation procedures for LAMP using a robotic pipettor without altering the core assay itself. This project focuses on minimizing contamination using sealed plates, reducing operator intervention by automating pipetting, and preventing enzyme degradation using cooling plates. Our approach employs pre-slit pierceable seals and cooling blocks to prevent cross-contamination …

Implications Of Noninvasive Blood Pressure Pumps On Mean Arterial Pressure, Sammie Miller

The Journal of Purdue Undergraduate Research

Noninvasive blood pressure pumps are recommended as the primary form of acquiring patient blood pressure to test for blood poisoning. The Philips IntelliVue Patient Monitor MP5, the Philips SureSigns VS4/VS3 Vital Signs Monitor, the Philips EarlyVue VS30 Vital Signs Monitor, the Philips IntelliVue Patent Monitor MP2/X2, the Philips IntelliVue Patent Monitor MMS, and the Philips IntelliVue Patent Monitor MP3/X3 were tested for accuracy. The control condition for hypotension was 95/55 (68) mmHg, normal blood pressure was 120/80 (93) mmHg, and hypertension was 155/85 (108) mmHg. The order of values is arrayed according to diastolic, systolic, and mean arterial pressure. The …

Optimization Of Research Pipeline To Characterize The Effects Of Atp-Sensitive Potassium Channels Mutations On Native Skeletal Muscle Fibers And Evaluate Potential Drug Therapy, Yuezhou Chen

McKelvey School of Engineering Graduate Student Theses & Dissertations

The ATP-sensitive potassium (KATP) channel is a critical metabolic sensor in skeletal muscle, yet its definitive molecular composition and functional roles remain contested. In this study, I conclusively demonstrate that the Kir6.2/SUR2 complex forms sarcolemmal KATP channel in mouse fast-twitch muscle. Genetic knock-out (KO) of Kir6.2 (Kcnj11−/−) or SUR2 (Abcc9−/−) resulted in a similar phenotype with increased fatigue resistance and a pathological rise in unstimulated resting tension at high-frequency stimulation. In contrast, SUR1 (Abcc8−/−) KO was ineffective. Furthermore, a CRISPR/Cas9 knock-in mouse model of a human SUR2A truncation variant (KCGV/KCGV) recapitulated the abnormal force accumulation, demonstrating that even loss-of-function of …

Expansion Limits Of Meshed Split-Thickness Skin Grafts, Haomin Yu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Split-thickness skin grafts are widely used to treat chronic wounds. Procedure design requires surgeons to predict how much a patch of the patient's own skin expands when it is meshed with rows of slits and stretched over a larger wound area. Accurate prediction of graft expansion remains a challenge, with current models overestimating the actual expansion, leading to suboptimal outcomes. Inspired by the principles of mechanical metamaterials, we developed a model that distinguishes between the kinematic rearrangement of structural elements and their stretching, providing a more accurate prediction of skin graft expansion. Our model was validated against extensive data …

Functional Characterization Of Abcc8 Mutations Potentially Linked To The Transition From Hyperinsulinemic Hypoglycemia To Diabetes, Hao Zhang

McKelvey School of Engineering Graduate Student Theses & Dissertations

ATP-sensitive potassium (KATP) channels, composed of the SUR1 and Kir6.2 subunits encoded by the ABCC8 and KCNJ11 genes, are critical regulators of membrane excitability and insulin secretion in pancreatic β-cells. Gain-of-function (GOF) mutations in these genes cause neonatal diabetes mellitus through impaired insulin secretion and persistent hyperglycemia, whereas loss-of-function (LOF) mutations lead to congenital hyperinsulinism (CHI) with hypoglycemia due to β-cell hyperexcitability. I have addressed a paradoxical form of maturity-onset diabetes of the young (MODY) arising from KATP mutations, in which patients transition from CHI to glucose intolerance later in life. My experiments indicate that many KATP mutations associated with …

Methods For The Discovery Of Antibodies Toward Junin Virus Utilizing Yeast Surface Display, Jonathon E. Corral

Doctoral Dissertations and Projects

The importance of this study is to perform antibody discovery as a means to derive novel preventative and therapeutic antibody countermeasures against the Junín virus, to alleviate the potential risk of a global pandemic. The purpose of this methodological study was to develop a protocol that utilizes yeast surface display to discover antibodies, from naïve human antibody libraries, that can bind the Junín Virus antigen. The methodology of yeast surface display employs the galactose-inducible GAL1 promoter to synthesize and express antibody proteins bound to the Aga2p and Aga1p and anchored to the cell wall by glycosyl phosphatidylinositol motif (GPI). The …

2d-Nanosilicate Carriers For Sustained Delivery Of Vaccine Components, Chih Yun Liu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Laponite® 2D Nanosilicates (NS) are disc-shaped platelets (~30 nm diameter, ~1 nm thick) with positively charged edges and negatively charged faces, capable of loading proteins, drugs, and nucleic acids via electrostatic interactions to form a house-of-cards gel that sequesters cargo. Here, we evaluated NS for sustained delivery of antigens and Toll-like receptor (TLR) agonists to extend germinal center duration and enhance antibody quality. The model antigen ovalbumin (OVA) was adsorbed onto NS at acidic pH in a ~1:1 ratio, with partial unfolding that remained stable at physiological pH. NS-OVA complexes were efficiently internalized by dendritic cells, with uptake driven primarily …

Design And Development Of Biomimetic Hydrogel Interfaces For Enhanced Bioelectrical Signal Acquisition, Daniela Nikoloska

UNLV Theses, Dissertations, Professional Papers, and Capstones

Every second, human skin processes over one million sensory signals while maintaining properties such as electrical conductivity, mechanical adaptability, and regenerative capability that surpass all synthetic materials. Contemporary bioelectronic devices prove inadequate when contacting skin surfaces due to poor adhesion and electrical contact issues that prevent effective sensing. Despite advancements in wearable and bioelectronic technologies, current devices face major drawbacks when interfacing with human skin, particularly in maintaining firm adhesion, conformability, and low-noise electrical signal acquisition.

This research focuses on the development of a biomimetic hydrogel-based interface for bioelectronic sensing. Specifically, a hybrid hydrogel system composed of polydopamine (PDA)- doped …

Durability Of Alkali-Activated Concretes Under 5% Sulfuric Acid Environment, Celal Karabaş, Anıl Niş

Journal of Sustainable Construction Materials and Technologies

The investigation focused on the resistance to 5% sulfuric acid degradation of the alkali-activated concretes (AAC). The AAC was manufactured using a blended binder of 50% slag and 50% F-type fly ash. The AAC was activated using a blend of 14 M sodium hydroxide and sodium silicate, with a hydroxide-to-silicate ratio of 1/2,5. Six AAC were produced against a 5% sulfuric acid environment, varying the binder amounts (400–500–600 kg/m3) and activator-binder (A/B) ratios (0,45–0,55). The chemical resistance of AAC was evaluated by visual appearance, variation in weight and compressive strengths. The findings pointed out that more gypsum and higher weight …

Comprehensive Risk Assessment For Construction Site Managers In Kosovo: A Mixed-Method Approach, Muhamet Ahmeti, Besian Sinani

Journal of Sustainable Construction Materials and Technologies

This study developed and validated a hybrid ISO 31000:2018 Kosovo-compliant risk assessment framework tailored for construction site managers operating within transitional economies. The research employed audits of 20 ISO-certified contractors in Pristina, Kosovo, along with field observations, interviews, and quantitative risk matrices. The findings indicate a critical concentration of risk, with 70% of firms classified as "High" or “Very High” risk. The most prevalent hazards identified were working at height without collective protection, unprotected electrical systems, and manual handling of heavy materials. Regression analysis revealed that firms with a designated safety champion achieved significantly lower risk scores, whereas those with …

Behaviour Of Internally Strengthening Hollow Stainless-Steel Hot-Rolled Circular Columns Filled With Crumb Rubber And Recycled Aggregate Concrete, Wadhah M. Tawfeeq, Mohammed M. Rasheed, Mithaq Kohees, Ahmed W. Al Zandd, Saif Al-Balushi, Hamed Al Abdul Salam

Journal of Sustainable Construction Materials and Technologies

Stainless-steel sections are increasingly being utilised in favour of their higher durability. Simultaneously, the use of recycled materials in concrete is aligned with the global concern to encourage sustainable and environmentally friendly construction. The paper examined the behaviour of stainless-steel columns filled with concrete with crumb rubber (CR) and recycled aggregate (RA). It analysed the effect of different percentages of CR (0, 15, and 30) and RA (0, 15, and 50) on the compressive strength of the concrete and the performance of the columns using stainless-steel hollow sections. 20 specimens were manufactured, 18 of which were cast with concrete containing …

Piezoelectric Concrete: A Smart Material Approach For Energy-Harvesting Structural Technologies, Dianah Mazlan, Vynotdni Rathinasamy, Naveen Kumar, Liu Chunpeng, Elango Elango

Journal of Sustainable Construction Materials and Technologies

The rapid growth of urban infrastructure demands innovative materials that not only support structural performance but also contribute to sustainability through energy harvesting. Piezoelectric concrete, which integrates ceramics, polymers, nanomaterials, and bio-based fillers into cementitious matrices, has emerged as a promising solution. This review systematically explores the fundamentals of piezoelectricity in concrete, highlighting how stress-induced electromechanical coupling enables both energy harvesting and structural health monitoring. The paper critically evaluates major material systems including PZT ceramics, PVDF polymers, hybrid nanocomposites, and emerging bio-based materials, alongside their integration strategies such as embedded and surface-mounted approaches. Applications across pavements, bridges, and smart buildings …

Recreating Fiber Recruitment With Fiber Recruitment Using Additive Manufacturing, Natalia D. Mciver

Biomedical Engineering ETDs

Injured ligaments are often repaired with tendon grafts which may over or under constrain the joint; there is a need for an artificial graft option with the mechanical properties of a native ligament. Crimped fibers within ligaments allow for recruitment which means the viscoelastic properties of stress relaxation and creep are not inversely related. A feasibility study using ACLs and large-scale crimp models to study viscoelasticity, led to an in-depth analysis of the scapholunate interosseous ligament. Using the Modified Kelvin spring-dashpot model, for describing viscoelasticity with a variable stiffness property (time dependent fiber recruitment), we defined the relationship between creep …

Electrochemical Detection Of No And Ca2+ During Cold Atmospheric Plasma Treatment Of Acute Wounds: Sensor Selectivity And Stability In The Plasma-Bio-System, Jonathan E. Thomas, Kristina Pattison, Suneel Kumar, Gagana Karkada, Duncan Trosan, Aunic Goodin, Jason Rainone, Dnyaneshwari Rananavare, Vandana Miller, Francois Berthiaume, Katharina Stapelmann

Kimmel Cancer Center Faculty Papers

Cold atmospheric plasmas (CAP) are a versatile tool in medical applications like wound healing. Its therapeutic benefits are partially attributed to the generation of biologically active reactive oxygen and nitrogen species (RONS). Characterization of RONS, however, typically only occurs after treatment. Here we report the first real-time in situ detection of CAP-generated nitric oxide (NO), and the simultaneous detection of cellular calcium ions (Ca²⁺) release using electrochemical sensors during CAP treatment of murine wounds. In vivo, NO rose rapidly within the first minute of CAP treatment but accumulated less overall than in PBS, reflecting reactions with wound-bed targets. In situ …