Engineering Commons^™

Characterizing The Molecular And Cellular Changes Of Senescent Cells Induced By Diverse Stressors In 2d And 3d Microenvironments, Apoorva Chauhan

UNLV Theses, Dissertations, Professional Papers, and Capstones

Aging is a risk factor for myriad diseases and is often associated with the accumulation of senescent cells. Cellular senescence, a process of irreversible cell cycle arrest, is associated with various changes in cellular morphology and function. While senescence will occur naturally in a time-dependent manner, it can be prematurely induced by various extrinsic and intrinsic factors. Most senescence studies model cell behavior in two-dimensional (2D) microenvironments; however, these models are not physiologically relevant. In this study, the effects of naturally occurring reactive oxygen species (ROS) hydrogen peroxide (H2O2) and commonly used chemotherapy drugs, doxorubicin and palbociclib, on cellular senescence …

Utilizing Spatial Transcriptomics To Compare Gene Expression In Volumetric Muscle Loss Injury Recovery, Colton Gattis

Biomedical Engineering Undergraduate Honors Theses

Volumetric Muscle Loss (VML) injuries are known to disrupt the normal regenerative process via fibrosis leading to an extensive permanent loss of muscle function. The specific causation of this disruption remains to be defined; however, with new developments in transcriptomics, genetic trends can be identified across regions of tissue over time. This study follows VML injuries within the tibialis anterior of a mouse model for fifteen days after initial injury to attempt to identify expected transitions in healing. Genetic presence began to become more diversified as recovery progressed from four to fifteen days post injury with spatial clusters becoming globalized …

Quantification Of Age-Related Changes In The Structure And Mechanical Function Of Skin With Multiscale Imaging, Alan E. Woessner, Nathan J. Witt, Jake D. Jones, Edward A. Sander, Kyle P. Quinn

Biomedical Engineering Faculty Publications and Presentations

The mechanical properties of skin change during aging but the relationships between structure and mechanical function remain poorly understood. Previous work has shown that young skin exhibits a substantial decrease in tissue volume, a large macro-scale Poisson’s ratio, and an increase in micro-scale collagen fiber alignment during mechanical stretch. In this study, label-free multiphoton microscopy was used to quantify how the microstructure and fiber kinematics of aged mouse skin affect its mechanical function. In an unloaded state, aged skin was found to have less collagen alignment and more non-enzymatic collagen fiber crosslinks. Skin samples were then loaded in uniaxial tension …

Spectrophotometric Device For Early Malaria Detection, Adrian Wasylewski, Christopher Faber, Victor Lin

Honors Thesis

Malaria remains a significant global health challenge, with millions of cases reported annually, particularly in resource-limited regions. Timely and accurate diagnosis is crucial for effective treatment and disease management. Unfortunately, there are still significant challenges in existing testing procedures, which are often expensive, inaccurate, or impractical for mass testing. While spectrophotometry has been proposed as a detection tool for other tropical diseases such as dengue fever, no prototype has been made for any disease, including malaria. This report addresses this gap by presenting a spectrophotometric-based malaria detection tool that achieves high sensitivity at a low cost. The inclusion of a …

Secured Blockchain And Fractional Discrete Cosine Transform-Based Framework For Medical Images, Abhay Kumar Yadav, Virendra P. Vishwakarma

Makara Journal of Technology

Images can store large amounts of data and are useful for transmitting large amounts of information across different geographical locations using different cloud services. This data sharing increases the chances of cyber-attacks on digital images. Blockchain has properties that enable it to work as a solution to this problem, providing enhanced security and unchangeable storage. However, image size poses a challenge in image storage, as it increases the related storage cost. Compressing images using fractional discrete cosine transform (fctDCT) reduces the amount of data required to express an image securely. This paper presents a novel framework for securely storing and …

Comparison Of Four In Vitro Test Methods To Assess Nucleus Pulposus Replacement Device Expulsion Risk, Tahmanna Rahman, Matthew J. Kibble, Gianluca Harbert, Nigel Smith, Erik Brewer, Thomas P. Schaer, Nicolas Newell

Rowan-Virtua School of Translational Biomedical Engineering & Sciences Departmental Research

Background

Nucleus replacement devices (NRDs) are not routinely used in clinic, predominantly due to the risk of device expulsion. Rigorous in vitro testing may enable failure mechanisms to be identified prior to clinical trials; however, current testing standards do not specify a particular expulsion test. Multiple methods have therefore been developed, complicating comparisons between NRD designs. Thus, this study assessed the effectiveness of four previously reported expulsion testing protocols; hula-hoop (Protocol 1), adapted hula-hoop (Protocol 2), eccentric cycling (Protocol 3), and ramp to failure (Protocol 4), applied to two NRDs, one preformed and one in situ curing.

Methods

Nucleus material …

Comparison Of Four In Vitro Test Methods To Assess Nucleus Pulposus Replacement Device Expulsion Risk, Tamanna Rahman, Matthew J. Kibble, Gianluca Harbert, Nigel Smith, Erik Brewer, Nicholas Newell

Rowan-Virtua School of Translational Biomedical Engineering & Sciences Departmental Research

Background: Nucleus replacement devices (NRDs) are not routinely used in clinic, predominantly due to the risk of device expulsion. Rigorous in vitro testing may enable failure mechanisms to be identified prior to clinical trials; however, current testing standards do not specify a particular expulsion test. Multiple methods have therefore been developed, complicating comparisons between NRD designs. Thus, this study assessed the effectiveness of four previously reported expulsion testing protocols; hula-hoop (Protocol 1), adapted hula-hoop (Protocol 2), eccentric cycling (Protocol 3), and ramp to failure (Protocol 4), applied to two NRDs, one preformed and one in situ curing. Methods: Nucleus material …

Reducing Glass Loss During Transportation And Storage, Abdulaziz Muzafarovich Qurbanov, Mirzaabdullayev Jaxongir Baxtiyorovich

Technical science and innovation

The article discusses the processes of transportation and storage of sheet glass in the production of protective glass for cars. The experience of organizing the transportation and storage of glass in developed countries of the world was analyzed in order to study the problems of losses of raw materials during the transportation and storage of laminated glass, as well as to develop and approve a regulatory and technical document. in this field. The supplies of various brands of polished laminated glass used in the production of protective glass for cars to Avtooina LLC from different addresses, from different manufacturers were …

Mathematical Modeling For Dental Decay Prevention In Children And Adolescents, Mahdiyeh Soltaninejad

Dissertations

The high prevalence of dental caries among children and adolescents, especially those from lower socio-economic backgrounds, is a significant nationwide health concern. Early prevention, such as dental sealants and fluoride varnish (FV), is essential, but access to this care remains limited and disparate. In this research, a national dataset is utilized to assess sealants' reach and effectiveness in preventing tooth decay, particularly focusing on 2nd molars that emerge during early adolescence, a current gap in the knowledge base. FV is recommended to be delivered during medical well-child visits to children who are not seeing a dentist. Challenges and facilitators in …

Low Impedance, Durable, Self-Adhesive Hydrogel Epidermal Electrodes For Electrophysiology Recording, Naiyan Wu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Traditional electrodes used for electrophysiology recording, characterized by their hard, dry, and inanimate nature, are fundamentally mismatched with the soft, moist, and bioactive characteristics of biological tissues, leading to suboptimal skin-electrode interfaces. Hydrogel materials, mirroring the high water content and biocompatibility of biological tissues, emerge as promising candidates for epidermal electronic materials due to their adjustable physicochemical properties. However, challenges such as inadequate electrical conductivity, elevated skin impedance, unreliable adhesion in moist conditions, and performance decline from dehydration have significantly restricted the efficacy and applicability of hydrogel-based electrodes. In this thesis, we report a high-performance hydrogel epidermal electrode patch for …

Ambulatory Electrocardiographic Monitoring, Genesis V. Garay, Arath Sanchez

ATU Scholars Symposium

•Cardiovascular disease (CVD) is the world's leading cause of death, especially prevalent in low- and middle-income countries. Up to 80% of premature heart attacks and strokes are preventable. •Current ambulatory electrocardiographic (ECG) monitors, while effective in diagnosing heart rhythm issues, are often cost-prohibitive and have limitations like short monitoring periods, user-initiated recording, and offline data analysis. •This poster summarizes the foundation of the creation of a monitoring system that attempts to address these issues.

Advancing Brain Tumor Segmentation With Spectral–Spatial Graph Neural Networks, Sina Mohammadi, Mohamed Allali

Engineering Faculty Articles and Research

In the field of brain tumor segmentation, accurately capturing the complexities of tumor sub-regions poses significant challenges. Traditional segmentation methods usually fail to accurately segment tumor subregions. This research introduces a novel solution employing Graph Neural Networks (GNNs), enriched with spectral and spatial insight. In the supervoxel creation phase, we explored methods like VCCS, SLIC, Watershed, Meanshift, and Felzenszwalb–Huttenlocher, evaluating their performance based on homogeneity, moment of inertia, and uniformity in shape and size. After creating supervoxels, we represented 3D MRI images as a graph structure. In this study, we combined Spatial and Spectral GNNs to capture both local and …

Ferroresonance In Three-Phase Electrical Networks, Shavkat Ernstovich Begmatov

Technical science and innovation

Possible modes of ferroresonance in three-phase electric networks and analysis of substitution schemes where ferroresonance voltage increase is observed are considered. The most complete magnetization curve of the transformer core and the analysis of the generalized equivalent substitution scheme are presented, as a result of which more accurate formulas for determining the values of equivalent parameters of the electrical network and voltage transformer in ferroresonance mode are obtained. Factor of ferroresonance voltage increase is introduced, which determines ratio between amplitude values of transformer phase voltage and mains voltage. The method of determination of boundary conditions of steady ferroresonance voltage increase …

Main Prospects Of Natural Gas Purification Technologies From Acidic Compounds, Oybek Yusupdjanovich Aripdjanov, Diyora Zokhid Qizi Khayrullaeva, Jonibek Avazek Ogli Abdumuminov

Technical science and innovation

The article discusses the main prospects for the technology of purifying natural gas from acidic components and the problems of ensuring the purity of oil and gas products in accordance with state standards. An increase in the degree of purification from H₂S, CO₂, elemental sulfur, carbonyl sulfide, ethyl mercaptans (thiols), methyl mercaptan, carbon disulfide, sulfides, disulfides (dithioethers), thiophene, sulfoxides and sulfones is considered. Also, the physicochemical properties of the absorbent for the purification of sulfur compounds (generated during natural gas processing) are studied. Based on the study of various absorbents (ethanolamine (EA), methylethanolamine (MEA), diethanolamine (DEA), …

Tunable Dual-Phase Dual-Drug Delivery System Using A Plga Microparticle/Pva Hydrogel Composite, Timothy John Eck

Theses and Dissertations

Current drug-eluting coatings have demonstrated controlled long-term, sustained release but have only tried to mitigate short-term burst release as a negative side effect. For applications like wound healing, there is a need for a drug-eluting coating which is adjustable in both short- and long-term release, independent of each other. We present a tunable dual-phase dual-drug delivery coating composed of drug-loaded polymer microparticles and drug-loaded hydrogel which can control short term and long term release individually in this study. This coating was created using lidocaine and dexamethasone encapsulated in poly(D,L-lactide-co-glycolide) particles combined with lidocaine- and dexamethasone-loaded poly(vinyl alcohol) hydrogel. Hydrogel drug …

Spatial Correspondence Of Cortical Activity Measured With Whole Head Fnirs And Fmri Toward Clinical Use Within Subject, Anthony Zinos, Julie C. Wagner, Scott A. Beardsley, Wei-Liang Chen, Lisa Conant, Marsha Malloy, Joseph Heffernan, Brendan Quirk, Robert W. Prost, Mohit Maheshwari, Jeffrey Sugar, Harry T. Whelan

Biomedical Engineering Faculty Research and Publications

Functional near infrared spectroscopy (fNIRS) and functional magnetic resonance imaging (fMRI) both measure the hemodynamic response, and so both imaging modalities are expected to have a strong correspondence in regions of cortex adjacent to the scalp. To assess whether fNIRS can be used clinically in a manner similar to fMRI, 22 healthy adult participants underwent same-day fMRI and whole-head fNIRS testing while they performed separate motor (finger tapping) and visual (flashing checkerboard) tasks. Analyses were conducted within and across subjects for each imaging approach, and regions of significant task-related activity were compared on the cortical surface. The spatial correspondence between …

Development Of Novel Radiotherapy Treatment Monitoring And Quantitative Cherenkov Surface Dosimetry For Diverse Populations, Savannah M. Decker

Dartmouth College Ph.D Dissertations

In the U.S. alone, nearly 2 million people will be diagnosed with cancer annually, and over half of them will receive radiation therapy throughout the course of their care. While widely regarded as safe, radiation therapy presents unique challenges that other procedures, such as surgery, lack. Namely, the invisible nature of the radiation itself makes it impossible to directly visualize treatment. Many immobilization and localization techniques exist to minimize the chance of incorrect radiation dose delivery, yet incidents still occur. Within the last decade, Cherenkov imaging has emerged as a new radiation therapy delivery verification technique. Cherenkov imaging is unique …

Testing Resilience Of Microalgae Biofilms When Exposed To Hydrothermal Liquefaction Aqueous Phase, Davis Haag

Student Research Symposium

Hydrothermal liquefaction (HTL) is a process that transforms wet biomass into a mixture of aqueous phase (AP), biochar solids, biocrude oil, and biogas.

The HTL process is not economically viable on a large scale partially because the HTL-AP is a toxic waste product with no current use.

The HTL-AQ contains high amounts of nitrogen (N) and phosphorus (P), but also environmental toxins such as phenolic compounds. The N and P could potentially be used to grow algae if it can survive the toxins.

Rotating algal biofilm reactors (RABRs) provide a method to grow algae biomass as a biofilm on plastic …

Investigating The Role Of Fluid Shear Stress During Metastasis On Enhanced Breast Cancer Extravasation, Alejandra M. Ham

LSU Master's Theses

In 2022, ~288,000 American women were diagnosed with metastatic breast cancer which was the leading cause of patient mortality with ~43,000 American women succumbing to the disease. Women can be diagnosed with four different molecular subtypes of breast cancer: luminal A, luminal B, human epithelial growth receptor type 2 enriched (HER2+), and triple-negative breast cancer (TNBC). TNBC accounts for ~12% of all breast cancers, yet it has the worst outcomes. TNBC is highly invasive, with ~46% of TNBC patients developing metastatic disease. A further understanding of metastatic TNBC is needed to provide a greater understanding of how to treat this …

Formulation, Characterization, And In Vivo Immunogenicity Evaluation Of Heat-Stabilized Dissolvable Polymeric Microneedles, Aidan Lane Leyba

Biomedical Engineering ETDs

Since its introduction, vaccination has improved health outcomes tremendously. However, modern vaccination efforts are still difficult to implement, particularly in developing countries with warm climates. This includes complex and expensive cold-chain management of vaccines to maintain stability, a lack of medical personnel to administer parental vaccines, and needle phobia. As an alternative, dissolvable microneedles have recently been studied for their simple and painless application. In this thesis, I present a novel manufacturing process for polymer-based dissolvable microneedles, loaded with virus-like particles vaccines conjugated to TRIO or Sialokinin peptides to target malaria and arboviruses, respectively. We have performed multiple characterization studies …

Profiling Of Voltage-Gated Sodium Channel Subtype Expression And Resulting Susceptibility To Targeted Osmotic Lysis In Cancer, Spencer Gerard Lemoine

LSU Doctoral Dissertations

Cancer is a disease characterized by a wide array of dysregulated cellular function, activity, and growth. At times, specific dysregulations associated with cancer can be exploited as avenues of potential treatment. The sodium handling mechanisms and their associated proteins in cancer have received closer attention recently closely as such a potential mechanism to exploit for treating advanced cancer. Some novel treatments aim to inhibit the expression or activity of these sodium handling proteins in an attempt to prevent the cancer from advancing or becoming more aggressive; however, such approaches have had limited success. Targeted osmotic lysis (TOL) is a new …

Use Of Mathematical Skills For Technical Condition Assessment Of Power Autotransformers, Dilafruz Rustamjon Qizi Abdullabekova, Nurali Berdiyorovich Pirmatov

Technical science and innovation

In this paper, we review innovative approaches to assess the technical condition of autotransformers using mathematical methods. The main purpose of these methods is to increase the efficiency of diagnostics and prevent possible failures in power systems. The developed mathematical expression is based on complex data analysis, application of statistical methods and machine learning technologies. This makes it possible to achieve more accurate and earlier detection of potential problems. As a result of these innovative approaches, the possibilities for early detection and prevention of faults are significantly increased. This is important for ensuring the smooth operation of power systems and …

Quantitative Assessment And Characterization Of Tool Wear Phenomena In Advanced Manufacturing Processes, Oybek Valijonovich Tuyboyov

Technical science and innovation

This paper explores the quantitative assessment and characterization of tool wear phenomena in advanced manufacturing processes, employing a multifaceted approach encompassing traditional measurements, image processing, machine learning, and predictive modeling. The study emphasizes the intricate dynamics of tool wear and its direct impact on cutting tool performance, addressing challenges in real-time monitoring and optimization of machining operations. Traditional methods like VBmax measurement are juxtaposed with advanced techniques such as the improved conditional generative adversarial net with a high-quality optimization algorithm (CGAN-HQOA), efficient channel attention destruction and construction learning (ECADCL), and shape descriptors based on contour, moments, orientations, and texture. Artificial …

Implementing A Solar Photovoltaic Station In Watering Systems Utilizing Complex Software, Akbarxon Sarvar O'G'Li Uroqov, Faxriddin Jaylovovich Nosirov, G'Olibjon Pardayevich Arzikulov, Zarina Amriddin Qizi Sayfutdinova

Technical science and innovation

This article explores the benefits of transitioning from traditional agricultural irrigation systems to more cost-effective alternatives powered by renewable energy sources. By integrating solar photovoltaic technology into irrigation processes, significant reductions in resource wastage, estimated at 45-50%, are achievable through the implementation of drip irrigation techniques. This results in enhanced agricultural productivity. Moreover, the utilization of solar panels in green zones mitigates surface temperature increases, contributing to a 2-5% boost in electricity production. Currently, irrigation facilities primarily rely on the main energy grid. However, transitioning to renewable energy sources decreases reliance on non-renewable fuels, reduces greenhouse gas emissions, and fosters …

Selective Oxidation Of Iron In Chalcopyrite For Enhanced Copper Recovery, Khojiakbar Shuxrat O'G'Li Sultonov, Shokhrukh Toshpulatovich Khojiev, Gulnoza Berdiyor Qizi Beknazarova, Malika Sayfullayevna Saidova

Technical science and innovation

This study explores the thermodynamic feasibility of selectively oxidizing iron contained in chalcopyrite mineral while preventing the oxidation of copper sulphide, with the ultimate goal of enhancing the copper concentration in the sulphide concentrate. A redox reaction in the solid phases between chalcopyrite and copper (I) oxide was constructed and subjected to thermodynamic analysis. The research identifies a crucial temperature range of 498-598 K (225-325 °C) as the most favourable for the redox reaction. The equilibrium constants at the selected optimal temperatures, 1.152 for chalcopyrite and 1.137 for copper (I) oxide, indicate that the redox reaction adheres to the expected …

Solving Water Resources Problems - Water Saving In The Republic Of Uzbekistan, Rustam Muxammatdjanovich Raximov

Technical science and innovation

In this article we will talk about the problems of water resources in the Republic of Uzbekistan. The problem of drinking water supply, solutions to provide drinking water to the population of Uzbekistan. The largest consumers of fresh water in Uzbekistan are farmers. Due to outdated infrastructure, 40% of water is wasted. Rising food prices and the risk of spreading disease are the first signs of water shortages that we may experience in the coming еars. Uzbekcosmos told how to solve the problem. Water is an invaluable resource used not only in the home, but also in the production and …

Modelling Of Heat Transfer In An Air Solar Collector, Shakhnoza Abduvaxitovna Sultanova, Jasur Esirgapovich Safarov, A.A. Mambetsheripova

Technical science and innovation

This study is the prediction, depending on time and different geographical and climatic situations, of different operating parameters: solar radiation, ambient and outlet coolant temperature, heat exchange coefficients and losses. All these determine, in the absence of measurements, the efficiency of the system modelled with existing models with respect to these parameters. These models are usually compared with experimental results. Before modelling, it is necessary to investigate the different heat transfer and exchange regimes that exist between the different elements of this system in order to eventually have a system of equations governing this exchange. The modelling principle is to …

A Study On The Influence Of Cutting Parameters On Surface Roughness And Visualization Through Contour Plots And 3d Surface Profiles, Zayniddin Nosirovich Muxiddinov

Technical science and innovation

This research investigates the intricate relationship between cutting parameterscutting speed, feed rate, and depth of cut and surface roughness in machining processes. Surface roughness is a key determinant of machined surface quality, and optimizing cutting parameters is crucial for achieving superior finishes. Employing advanced visualization techniques, including contour plots and 3D surface profiles, the study offers a comprehensive exploration of surface topography dynamics. Statistical analyses and regression modeling enhance the quantitative understanding of how cutting parameters interact to shape surface roughness. The research affirms the significant influence of cutting speed, feed rate, and depth of cut, providing practical insights for …

Theory Of Development And Improvement Of The Mathematical Model Of The Methodology Of Public Control In The Management Of Occupational Safety And Industrial Risks, Aliakbar Khamidullaevich Rasulev, Sunnatilla Suleymanovich Suleymanov, Nodira Bakhadirzhanovna Gaibnazarova

Technical science and innovation

The article develops and analyzes a mathematical model based on a logical flowchart of the methodology of public control in the management of occupational safety and industrial risks and probability theory, according to the model, the results of compliance with the requirements of social cooperation on occupational safety lead to a sharp increase in the probability of reliability, management efficiency becomes higher. Analysis of the mathematical model of the developed logical flowchart based on probability theory has shown that when the parties cooperate to monitor the results of compliance with labor protection requirements, they lead to a sharp increase in …

Research Of The Influence Of Dust On Photovoltaic Modules, Anvarjon Mirolimov, Xalmurat Iliev

Technical science and innovation

The influence of dust concentrations on the current-voltage characteristics (voltampere characteristics) of photovoltaic modules (PVM) based on crystalline silicon in laboratory conditions. It was investigated how an uncleaned panel affects the output power. The tests were carried out in the city of Tashkent on the territory of the “National Research Institute of Renewable Energy Sources”. The objects were located co-plurally as specified in GOST R 60904-1 Photoelectric devices. Part 1. Measurement of current-voltage characteristics. Measurements of a cleaned photovoltaic module with a maximum power of 330 W and not a cleaned one of 236 W were obtained. Based on the …