Science and Mathematics Education Commons^™

Understanding Materials, Petros J. Katsioloudis

STEMPS Faculty Publications

The article discusses the importance of understanding the characteristics of materials that will be used for different applications. Through the years, the inventions and innovations in the technology of materials are becoming more technologically complex. Innovations in the materials are divided in different categories, including metals, ceramics, polymers and composites. Example of such innovations in the technology of materials include the ceramic composite applied to the surface of the space shuttle panels to absorb and release high amounts of heat.

Green Ships: Keeping Oceans Blue, Petros J. Katsioloudis

STEMPS Faculty Publications

The article discusses the contribution by the marine transport sector to air and water pollution. According to a congressional research report, cruise ships produce large volume of wastes like sewage, wastewater from sinks, showers, and galleys, hazardous wastes, solid wastes, oily bilge water, ballas water and polluted air. Ship manufacturers are advised to create Green Ships that prevent pollution while governments are urged to strengthen the laws that prohibit dumping of waste to oceans to alleviate pollution.

A Model Of Responses To Race-Based And Gender-Based Stereotype Threat In Computer Science, Lara Tedrow

Psychology Theses & Dissertations

The perception of stereotype threat among computer science students was examined at two universities. A model of stereotype threat was developed and tested among students enrolled in three undergraduate computer science courses at two universities. The goal of this model was to provide an understanding of the underlying mechanisms through which stereotype threat works.

The study tested relationships among the following variables: race-based stereotype threat, gender-based stereotype threat, goal orientation, CS self-efficacy, active coping, behavioral disengagement, effort, and performance. Structural equation modeling was used to test the measurement model and a series of nested structural models. Findings supported the proposed …

Water Treatment: Keeping It Pure, Petros Katsioloudis

STEMPS Faculty Publications

The article discusses the importance of water treatment in providing quality and safe drinking water. A historical background of the U.S. federal regulation of drinking water quality is presented. It was found by the Public Health Service in 1969 that only 60 percent of the systems surveyed delivered water that met all the Public Health Service standards. Filtration and chlorination are also cited as an effective treatment techniques for protecting U.S. water supplies from harmful microbes. An overview of the process of water treatment is presented.

Discovery Of The Depths, Petros J. Katsioloudis

STEMPS Faculty Publications

Throughout history the oceans have directly or indirectly influenced humans. The importance of knowing how to protect this valuable resource and insure it for future generations is vital. Underwater Vehicles are tools essential for this process, and therefore research and development to perfect these devices is needed. However, the main goal of these devices--to transmit images from places where humans cannot go--remains the same, and their importance to future discoveries remains vital. This article discusses the different types of underwater vehicles and describes an activity wherein students will fabricate an underwater remotely operated vehicle.

Biomedical Technology: Supporting Movement, Petros Katsioloudis

STEMPS Faculty Publications

According to the National Institute on Disability and Rehabilitation Research, an estimated 8.5 million children 21 years and younger have a disability (Jans & Stoddard, 1999). After about a decade, with the development of new and sophisticated materials (aluminum alloys, titanium alloys, and carbon fibers) and the integration of electronics, it was then possible to significantly improve the performance of prostheses, built with the so-called endo skeletal (or skeletal-modular) method (Mora, Beratni & Pedrotti, 2006).

A Program Evaluation Of Supplemental Instruction For Developmental Mathematics At A Community College In Virginia, Marilyn Lawson Peacock

Educational Leadership & Workforce Development Theses & Dissertations

With the current emphasis on accountability and the importance of math skills in our present economy, the success of developmental mathematics students at community colleges is critical. How to improve the success of these developmental students has become the impetus for many educational initiatives. One educational innovation in tutoring, called supplemental instruction, has been successfully applied to high-risk courses which are defined to have a failure rate in excess of 30%. Mid-Atlantic Community College, in its Title III grant which seeks to improve the success of developmental students, selected supplemental instruction as its initiative. This program evaluation investigated the effects …

The Relationship Between Rural Middle School Student Mathematics Achievement And Classroom Sense Of Community, John E. Donlan

Educational Leadership & Workforce Development Theses & Dissertations

This study addressed the need for more information about academic growth and achievement in mathematics, and how it relates to sense of community in middle school settings. This was accomplished by applying the Classroom and School Community Inventory (CSCI) construct (Rovai, Wighting, & Lucking, 2004) to all three middle schools in one rural county. The CSCI was utilized to measure sense of community in mathematics classes to determine if differences existed between grades six, seven, and eight, including gender subgroups, among the three middle schools in the same rural county. This study examined academic growth in the subject of mathematics …

Review Of The American Society For Engineering Education (Asee) Global Colloquium, Cape Town, South Africa, Philip A. Reed

STEMPS Faculty Publications

The following report addresses topics established by the Technical Foundation of America prior to attending the ASEE Global Colloquium October 19-24, 2008 in Cape Town South Africa. Specifically, this manuscript will address what the international engineering education community and the technology education community might have to offer each other. Responses appear below each of the three categories: impacts on curriculum, professional development, and collaboration.

Fourth Year Evaluation Of Tennessee Charter Schools, 2006-2007, Steven M. Ross, Aaron J. Mcdonald, Linda Bol

STEMPS Faculty Publications

In 2002, Tennessee passed its first Public Charter School legislation. Four schools were successful in gaining approval to begin operating in the 2003-2004 academic year. The second cohort of three charter schools began operation during the 2004-2005 academic year, with the third cohort of five schools starting up during the 2005-2006 academic year. No new schools were added during the 2006-2007 academic year. According to the charter school law, these charter schools were granted "maximum flexibility" to achieve alternative ways for public schools to educate school children. Though the flexibility granted to these schools is considered an advantage, previous research …

Motivation And Performance In Computer Science: Test Of An Integrative Theory, Katherine A. Selgrade

Psychology Theses & Dissertations

The purpose of this study was to design and empirically test a parsimonious integrative motivation theory. The theory integrates aspects of expectancy theory, social cognitive theory, goal-setting theory, and commitment theory. The theory was tested with 170 undergraduate, students in an introductory computer science (CS) course.

The study tested relationships among the following variables: CS self-efficacy, mathematics ability, affective commitment to the CS class, goal orientation, effort, and performance. The study also tested the interactive effects of effort and ability on performance. Structural equation modeling was used to test the measurement model and a series of nested structural models. Findings …

Review Of The Technology Education Research Conference (Terc), Surfer’S Paradise, Australia, Philip A. Reed

STEMPS Faculty Publications

The following report addresses questions established by the Technical Foundation of America prior to attending the Technology Education Research Conference (TERC) December 7-9, 2006 in Surfer's Paradise, Australia. Responses appear below each of the four questions.

Investigating The Relationship Between High School Technology Education And Test Scores For Algebra 1 And Geometry, Richard R. Dyer, Philip A. Reed, Robert Q. Berry

STEMPS Faculty Publications

The standards-based reform movement in education that began in the 1980s has evolved. In the 1990s, the focus was on producing subject-area content standards and modifying instruction. Today, the focus has shifted to assessment, and for technology education, demonstrating the impact on children and the efficacy of the discipline within general education. The purpose of this study was to compare the Standards of Learning (SOL) End-of-Course mathematics performance of high school students who completed courses in illustration and design technology to students who have not completed an illustration and design technology course. The following research questions were developed for this …

Examining Retention And Academic Success Among Community College Developmental Algebra I Students, Patricia B. Huber

Educational Leadership & Workforce Development Theses & Dissertations

An increasing number of community college matriculants enter college needing remediation in mathematics. This study examined factors that may affect student retention and academic success in a developmental Algebra I course at a community college, including demographic variables, life demand variables, pre-enrollment academic characteristic, self-regulated learning characteristics, and instructional methodology.

The study ran for two consecutive semesters and included 154 participants. Self-report measures were used to gain demographic information and information about students' beliefs about math and their self-regulated learning characteristics at the beginning of the semester. An elementary algebra pre-test was administered at the beginning of the semester with …

What Do We Value? Research On Technology Education Problems, Issues, And Standards In The United States, Philip A. Reed

STEMPS Faculty Publications

Technology education has seen significant changes since the early 1990's. The paradigm shift from industrial arts has been widely received. Communication tools have merged the global community and standards have helped unify content. While many of these changes have been positive, there are compelling calls for research to support technology education practice. How are we addressing this need? More importantly, is the research we are conducting adding value to technology education practice? This study presents a review and synthesis of published research, as well as graduate research, to address these questions. Specifically, research that has addressed recognized problems and issues …

Are You Ready To Provide Instruction Via Interactive Satellite Delivery Technology, John E. Turner, Philip A. Reed

STEMPS Faculty Publications

A difficulty for faculty new to teaching at a distance is being able to visualize the scope of needed skills and tasks that will be required of them. The purpose of this project was to provide an empirically-based, self-administered skill enhancement guide for new distance education faculty teaching via interactive satellite broadcast. A modified Delphi approach was used to survey 18 faculty members experienced in distance education from the 6 colleges at a major eastern university. Respondents created a validated task list in phase 1 and determined task criticality and sequencing of task learning in phase 2.

Secondary Mathematics Teachers' Perceptions Of The Achievement Gap, Linda Bol, Robert Q. Berry Iii

Educational Leadership & Workforce Development Faculty Publications

The purpose of this study was to survey the perceptions of secondary mathematics teachers on factors contributing to the achievement gap and ways to reduce this gap. National Council of the Teachers of Mathematics (NCTM) members were surveyed, and a total of 379 secondary teachers responded. Overall, respondents were most likely to attribute the achievement gap to student characteristics, such as differences in motivational levels, work ethic, and family support. Furthermore, teachers from schools with a higher population of White students were more likely to attribute the gap to student characteristics than were teachers in schools with higher percentages of …

Perceptions Of The Mathematics Achievement Gap: A Survey Of Nctm Membership, Robert Q. Berry, Linda Bol

Educational Leadership & Workforce Development Faculty Publications

No abstract provided.

The Influence Of Teacher Preparation Programs On Student Achievement And Nctm Standards In Algebra I Classrooms, Belinda Gimbert, Linda Bol, Denelle Wallace, Dean S. Cristol

STEMPS Faculty Publications

The impact of traditional and alternative teacher preparation programs on student achievement and the instructional delivery methods used in secondary school Algebra classrooms was explored through a mixed method comparative design. The research site was a high-need urban, majority-minority school system in partnership with a local university, a school-university partnership that offered a Transition To Teaching program. The data analyses revealed that alternative teacher preparation program is a viable avenue for meeting the needs of public schools for qualified and highly effective teachers in mathematics classrooms at the middle school and high school levels. Disaggregated data from the standardized state …

Bioengineering Instructional Framework For Technology Education, Philip A. Reed, Technology Education Department, Old Dominion University, Virginia Bioengineering Writing Team

STEMPS Faculty Publications

No abstract provided.

Stem Initiatives: Stimulating Students To Improve Science And Mathematics Achievement, Robert Q. Berry Iii, Philip A. Reed, John M. Ritz, Cheng Y. Lin, Steve Hsiung, Wendy Frazier

STEMPS Faculty Publications

The article focuses on how concepts in science, technology education, and mathematics show powerful relationships when it comes to student learning. Learning theorists believe that, through designed learning environments (contexts) and learning with hands-on projects, new knowledge can not only be learned, but learned in such a way that the knowledge can be transferred for other applications. Scholars in the applied sciences (school science, technology, and mathematics) believe that these subjects have transfer among themselves and that engineering activities can establish the contexts to learn these subjects, plus aid in the transfer of knowledge. This collaborative movement is referred to …

Bioprospecting, Philip A. Reed

STEMPS Faculty Publications

The article discusses that the product applications of bioprospecting are almost limitless. This area of biotechnology has been labeled bioprospecting, and it is a practice that is creating worldwide controversy. Defined simply, bioprospecting is "scientific research that looks for a useful application, process, or product in nature." However, as with most biotechnologies, the definition does not address the complexities of bioprospecting. Archeologists are finding that some biotechnologies, such as the use of herbs for medicine and the use of fermentation and yeast in food products, date back 5,000 to 10,000 years (De Miranda, 2004). The four main categories of biotechnologies …

A Conceptual Model For Determining Career Choice Of Chrome Alumna Based On Farmer's Conceptual Models, Lisa Simmons Moore

Theses and Dissertations in Urban Services - Urban Education

This qualitative program evaluation examines the career decision-making processes and career choices of nine, African American women who participated in the Cooperating Hampton Roads Organization for Minorities in Engineering (CHROME) and who graduated from urban, rural or suburban high schools in the year 2000. The CHROME program is a nonprofit, pre-college intervention program that encourages underrepresented minority and female students to enter science, technically related, engineering, and math (STEM) career fields. The study describes career choices and decisions made by each participant over a five-year period since high school graduation. Data was collected through an Annual Report, Post High School …

The Influence Of Teacher Preparation Programs On Student Achievement And The Use Of Nctm Standards And Principles In Middle School And High School Algebra I Classrooms, Denelle L. Wallace

Theses and Dissertations in Urban Studies

The impact of traditional and alternative teacher preparation programs on student achievement and the instructional delivery methods used in middle school and high school Algebra I classrooms was explored through a mixed method comparative design. The data analysis revealed that alternative teacher preparation programs are a viable avenue to explore in meeting the needs of public schools for providing qualified teachers in mathematics classrooms at the middle school and high school levels. Data from the standardized state test and district level quarterly assessments revealed no significant differences between groups on half of the achievement measures, but there was a significant …

A Paradigm Shift: Biomimicry. (Cover Story), Philip A. Reed

STEMPS Faculty Publications

Biomimicry is a new way of linking the human-made world to the natural world. Biomimicry is already having a tremendous impact on the way we design technological products and systems as of December 2003. The word biomimicry comes from Greek words bios and mimesis. In short, biomimics imitate nature. We now have the capability, however, to not only imitate products of nature but also nature's materials and processes. During the seventeenth century, the relationship between humans and the natural world changed in several ways. Scientists of various disciplines are working with engineers, designers, and other researchers in an interdisciplinary manner …

Geospatial Technology, Philip Reed, John Ritz

STEMPS Faculty Publications

Geospatial technology refers to a system that is used to acquire, store, analyze, and output data in two or three dimensions. This data is referenced to the earth by some type of coordinate system, such as a map projection. Geospatial systems include thematic mapping, the Global Positioning System, remote sensing, telemetry, and Geographic Information Systems. The science of mapmaking, cartography, has been around for centuries, and no one is sure of its true beginnings. Each of the above subsystems are elaborate fields unto themselves, however, researchers are linking them together to better understand the world in which we live. Learning …

A Matlab-Based Upper Division Systems Analysis Course For Engineering Technology, William D. Stanley, Paul L. Kauffmann, Gary R. Crossman

Engineering Technology Faculty Publications

The Department of Engineering Technology at Old Dominion University offers TAC of ABET accredited baccalaureate programs in Civil Engineering Technology, Electrical Engineering Technology, and Mechanical Engineering Technology. All students are required to take traditional courses in algebra and trigonometry, as well as differential and integral calculus, at the freshman and sophomore levels. While these courses provided the necessary basic mathematical skills, it was difficult to justify the traditional upper-division mathematics courses such as differential equations, vector analysis, etc., as appropriate for the special needs of engineering technology students.

To address this issue, the Department has undertaken the development of a …

A Study Of The Effects Of Constructivist Based Vs. Traditional Direct Instruction On 8th Grade Science Comprehension, Clair T. Berube

Theses and Dissertations in Urban Services - Urban Education

Studies conducted nationwide over the past several decades point consistently to the evidence that American school children lag behind several other countries in science scores. Problems arise from this dilemma, including the question of the ability of our youngsters to compete nationally and globally in the sciences as adults. Current research in this area of scores currently studies mostly mathematics. The few studies conducted concerning science mainly highlight students in other countries and neglects minorities and females regarding outcomes.

By contrast, this study investigated the effects of teacher types (also defined as teaching styles or classroom orientation) on student outcomes …

America Calling: A Social History Of The Telephone To 1940. (Book Review), Philip A. Reed

STEMPS Faculty Publications

No abstract provided.

The Effects Of Applied Technology Instruction On Mathematics Achievement And Career Interests Of Urban Seventh-Grade Students, Eric M. Fischer

Theses and Dissertations in Urban Services - Urban Education

The present study has been implemented to provide insight as to how, given limited resources, Technology Education curricula might be developed to best support the unique goals of an urban middle school aerospace magnet program. It was hypothesized that applied academic strategies, including interdisciplinary hands-on aerospace and computer-assisted instructional activities, would affect larger gains in mathematics achievement and would enhance career-interest development of urban seventh-grade students to a greater degree than would non-participation in such instruction. A randomized subjects, pretest-posttest control group design was used to assess treatment effects upon 71 urban seventh-grade students. Dependent variables were measured using the …