Science and Mathematics Education Commons^™

Test 2199: Case Ih Farmall 60a, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2193: John Deere 5100r Oc, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2191: John Deere 5090r Oc, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2197: John Deere 5125r Oc, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2196: John Deere 5115r Pfc, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2192: John Deere 5090r Pfc, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2194: John Deere 5100r Pfc, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1158 John Deere 6230r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Influential Factors In Consumer's Adoption Of Innovative Products, Mahdokht Kalantari

Wayne State University Dissertations

This dissertation addresses the challenges involved with the process of diffusion of innovations in the contexts of innovative educational materials and technological innovations.

Chapters 2 and 3 discuss building and using Online Brand Communities (OBCs) to disseminate innovative math educational materials. OBCs are known to be important platforms where consumers can communicate with the brand as well as other consumers. Through the effective use of these platforms, brands could accelerate the process of diffusion of their innovations. However, OBCs will not survive if consumers do not get engaged and participate in these communities. The purpose of this section of the …

Test 2207: Challenger Mt743, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2205: Challenger Mt738, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2202: John Deere 6215r Autoquad-Plus, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2200a: New Holland Workmaster 70, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2200: Case Ih Farmall 70a, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2190a: New Holland Workmaster 50, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Precise Energy Efficient Scheduling Of Mixed-Criticality Tasks & Sustainable Mixed-Criticality Scheduling, Sai Sruti

Masters Theses

"In this thesis, the imprecise mixed-criticality model (IMC) is extended to precise scheduling of tasks, and integrated with the dynamic voltage and frequency scaling (DVFS) technique to enable energy minimization. The challenge in precise scheduling of MC systems is to simultaneously guarantee the timing correctness for all tasks, hi and lo, under both pessimistic and optimistic (less pessimistic) assumptions. To the best of knowledge this is the first work to address the integration of DVFS energy conserving techniques with precise scheduling of lo-tasks of the MC model.

In this thesis, the utilization based schedulability tests and sufficient conditions for such …

Nebraska Summary: S1150 Challenger 1050, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Fostering Giftedness And Creativity: Implementing Engineering By Design In Kuwait, Nathan Mentzer, Philip A. Reed, Meshari Alnouri, Mohammad Barbarji

STEMPS Faculty Publications

The article offers information on a partnership between the International Technology & Engineering Educators Association (ITEEA) and the Sabah Al Ahmad Center for Giftedness and Creativity (SACGC) to support innovation and design education. The partnership is aimed towards the implementation of the Engineering byDesign (EbD) curriculum and contribute towards building a Kuwaiti society that fosters giftedness and creativity.

Virginia Technology And Engineering Education Association 1978-2018: Celebrating Six Decades Of Progress, Ron Vickers, Philip A. Reed, George R. Willcox

STEMPS Faculty Publications

(First Paragraph) Technology and engineering education in Virginia and the nation is coming to a crossroads. Recent growth in state directives, new courses, and ever-changing funding for science, technology, engineering, and mathematics (STEM) education influences the supply of Technology Education teachers, leading to what some say is a dire future for our profession and association. This history is gathered to emphasize the importance and value of what we teach in Virginia public schools. It also captures who was involved with the association leadership over the years.

Program And Proceedings: Nebraska Academy Of Sciences 1880–2018, 138th Anniversary Year, One Hundred-Twenty-Eighth Annual Meeting

Nebraska Academy of Sciences: Programs and Proceedings

Program

Aeronautics and Space Science

Collegiate Academy: Biology

Biological and Medical Sciences

Chemistry and Physics>/p>

Collegiate Academy: Chemistry and Physics

Learn to Print 3-D Models for Your Classroom Workshop

Aeronautics and Space Science Poster Session

Maiben Memorial Lecture: Thomas Clemente

Anthropology

Applied Science and Technology

Earth Science

Environmental Sciences

Teaching of Science and Mathematics

Friend of Science Award: Mary Kalen Romjue and Michael Sibbernsen

A Methodology To Predict Community College Stem Student Retention And Completion, Jennifer Lynn Snyder

Doctoral Dissertations

"Numerous government reports point to the multifaceted issues facing the country's capacity to increase the number of STEM majors, while also diversifying the workforce. Community colleges are uniquely positioned as integral partners in the higher education ecosystem. These institutions serve as an access point to opportunity for many students, especially underrepresented minorities and women. Community colleges should serve as a major pathway to students pursuing STEM degrees; however student retention and completion rates are dismally low. Therefore, there is a need to predict STEM student success and provide interventions when factors indicate potential failure. This enables educational institutions to better …

Gender Effects Of Robotics Programs On Stem-Related Self-Efficacy Of High School Students, Sandra Hall-Lay

Walden Dissertations and Doctoral Studies

Lack of STEM-related self-efficacy has impeded the growth of women in STEM fields. Out of school (OST) robotics programs and other STEM-related OST programs provide secondary students with opportunities to work in groups, brainstorm, and formulate ideas that require communication and teamwork. The purpose of this quantitative, quasi-experimental study was to compare STEM-related self-efficacy scores among male and female students who participated in OST robotics programs or other OST STEM-related programming. Independent variables were type of OST STEM program and gender. The dependent variable was students' STEM-related self-efficacy as measured by the Coping Self-Efficacy Scale. Responses from 149 students in …

Infographic: Institutional Barriers To Black And Latino Male Collegians’ Success In Engineering And Related Stem Fields, Leroy L. Long Iii, William Wanyagah

Publications

Infographic was created to support the article Institutional Barriers to Black and Latino Male Collegian's Success in Engineering and Related Stem Fields, which can be read here:

College Of Engineering Senior Design Competition Fall 2017, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …

Fifth Graders’ Creativity In Inventions With And Without Creative Articulation Instruction, Darcie K. Kress, Audrey C. Rule

Journal of STEM Arts, Crafts, and Constructions

Industry and authors of 21^st Century Skill Frameworks are calling for student proficiency in creativity, problem-solving, innovation, collaboration, and communication skills. This project involved 13 fifth grade gifted students in inventing products for a specified audience with a set of given materials, time limit, and topic constraints. The complex, challenging project supports Next Generation Science Engineering Process Standard 3-5-ETS1-2 and applies concepts of plant and animal adaptations. The study had a counterbalanced, repeated measures design in which student made an initial invention during the pretest, then participated in two trials with one in the control condition and the other …

Challenging Elementary Learners With Programmable Robots During Free Play And Direct Instruction, Kimberly S. Mccoy-Parker, Lindsey N. Paull, Audrey C. Rule, Sarah E. Montgomery

Journal of STEM Arts, Crafts, and Constructions

Computer programming skills are important to many current careers; teaching robot coding to elementary students can start a positive foundation for technological careers, develop problem-solving skills, and growth mindsets. This study, through a repeated measures design involving students in two classrooms at two widelyseparated grade levels (first graders aged 6-7 years and fifth graders aged 10-11 years), determined if allowing students to challenge themselves with coding exercises in the experimental condition resulted in greater learning and more positive attitudes than a more structured set of exercises provided by the teacher in the control condition. Background instruction in coding and using …

Reading Nonfiction Science Literature With And Without Arts Integration Activities, Elizabeth Mccartney, Catherine Mochal, Victoria Boyd, Audrey C. Rule, Sarah E. Montgomery

Journal of STEM Arts, Crafts, and Constructions

This study explores the integration of the arts into the teaching of science nonfiction texts during literacy instruction. Sixty-one elementary students (15 second graders, 25 third graders, and 21 fifth graders) attending schools of differing socio-economic levels participated in this study. The study examined the effects of artsintegration on student content knowledge, engagement level, and attitudes toward learning regarding science nonfiction texts. Throughout the eight-week study, students experienced both the traditional no-arts control condition and the experimental arts-integration condition in two-week segments for different science topics. Both conditions employed literacy strategies to teach comprehension of science nonfiction texts. The resulting …

Examining Natural Selection By Sketching And Making Models Of The Finches Of The Galapagos Islands, Phoebe J. Z. Pittman, Jolene K. Teske

Journal of STEM Arts, Crafts, and Constructions

This practical lesson describes how students in six eighth grade science classes participated in a lesson combining the National Core Arts Standards with the Next Generation Science Standards. The goal of the lesson was to provide visual representations of finch beak form and function so students could better understand genetic variation and how environmental pressures influence natural selection. Students sketched a finch with a large, medium, or small beak, corresponding to an experiment they had conducted with picking up different sizes of seeds with different sizes of binder clips. Using modeling with a variety of media, students created bird beaks …

Cinematherapy In Gifted Education Identity Development: Integrating The Arts Through Stem-Themed Movies, Timothy C. Kangas, Michelle Cook, Audrey C. Rule

Journal of STEM Arts, Crafts, and Constructions

Gifted students, because of their advanced development compared to peers, have emotional needs that require differentiated education programs. Asynchronous social and emotional development of gifted students often leads to identity issues. Cinematherapy can be used to help gifted students explore their identities through analysis of the actions of gifted characters in films. This practical article suggests STEM-themed movies with characters facing challenges useful for gifted student identity development. The Autonomous Learners Model is used to classify gifted learners in the movies to assist teachers in matching movies to the needs of gifted learners. Tables of STEM-themed movies with gifted characters …

How The Arts Standards Support Stem Concepts: A Journey From Stem To Steam, Ksenia S. Zhbanova

Journal of STEM Arts, Crafts, and Constructions

This issue of the Journal of STEM Arts, Crafts, and Constructions is focused on the effects of integrating arts with STEM areas, an important and widely-considered topic in education today. This editorial provides an overview of the current state of the arts and STEM areas integration paradigm, an analysis of the benefits of the arts integration with the STEM subjects, and an overview of the history of the arts anchor standards. Comparison and connections between the National Arts Core anchor arts standards, the scientific method, engineering design process, and the 5E learning cycle are also illuminated. Summaries of the practical …