Science and Mathematics Education Commons^™

Test 2216: Kubota M7-172, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2214: Kubota M7-132, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1178 Fendt 933, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Analysis Of Blended And Multi-Modal Instruction And Its Effects On Spatial Visualization Ability, Diana Bairaktarova, Daron Williams, Petros Katsioloudis

STEMPS Faculty Publications

For the last decade, remedial spatial visualization training has been offered to first-year engineering students in traditional classroom settings where students attend class and interact face-to-face with an instructor and peers. An alternative to the traditional pedagogical approach is a multi-modal blended learning format that combines in-class instruction with videos that can be viewed at the student’s convenience. The new setting affords students the opportunity to repeatedly revisit the basic instruction at the time and place of their choosing. This case study investigated student outcomes in a blended multi-modal Introduction to Spatial Visualization course that integrated video lectures; free-hand sketching …

Exposing Students To Stem Careers Through Hands-On Activities With Drones And Robots, Vukica M. Jovanović, George Mcleod, Thomas E. Alberts, Cynthia Tomovic, Otilia Popescu, Tysha Batts, Ms. Mary Louise Sandy

Engineering Technology Faculty Publications

Autonomous robots have been used in a variety of ways from collecting specimen in hazardous environments to space exploration. These robots can be found in various manufacturing systems as Autonomous Guided Vehicles (AGVs) to transport parts and assemblies throughout the manufacturing system. They have also been used as a vehicle to convey design thinking and other STEM-related concepts in mechanical engineering/mechanical engineering technology, electrical engineering/electrical engineering technology, computer science, and computer engineering. Various outreach events have included robotics based activities that engage students in building and programming autonomous robots for the purpose of achieving a specific task. These events are …

Recognizing Engineering Students’ Funds Of Knowledge: Creating And Validating Survey Measures, Dina Verdín, Jessica M. Smith, Juan Lucena

School of Engineering Education Graduate Student Series

This research base paper examines students who are the first in their families to attend college. Our research seeks to understand the role students’ funds of knowledge makes in first-generation college students’ undergraduate experience. Funds of knowledge are the set of formal/informal knowledge and skills that students learn through family, friends, and communities outside of academic institutions. This paper reports funds of knowledge themes relevant to first-generation college students in engineering and the process of gathering validity evidence to support the funds of knowledge themes.

Using ethnographic and interview data, six themes emerged: connecting experiences, community networks, tinkering knowledge, perspective …

Eager: Broadening Participation Of First-Generation College Student, Jessica M. Smith, Dina Verdín, Juan C. Lucena

School of Engineering Education Graduate Student Series

No abstract provided.

The Legacy Project: Rodney L. Custer, Dte, Rodney L. Custer Dte, Johnny J. Moye Dte

STEMPS Faculty Publications

An interview with vice president of Dept. of Technical Education, Rodney Custer is presented. Topics discussed include interest in technology and engineering education; academic qualification; and experience as university department chair administrator and working with the Center for Math, Science, and Technology (CeMast).

Improving Stem Recruitment Through A Theme-Based Summer Residential Camp Focused On Sea Level Rise, Vukica M. Jovanović, Balša Terzić, Mujde Erten-Unal, Victoria Hill, George Mcleod, Michelle Covi, David Burdige, Jenifer Alonzo, Justin Mason, Tysha Batts, Cynthia Tomovic

Engineering Technology Faculty Publications

In this paper, the authors present an enrichment program that focuses on Science, Technology, Engineering, and Math (STEM) concepts. The program is named Building Leaders to Advance Science and Technology (BLAST) and is held each summer at three universities across the Commonwealth of Virginia: Old Dominion University, the University of Virginia, and the Virginia Polytechnic Institute. BLAST is sponsored in partnership among these three universities and the Virginia Space Grant Consortium (VSGC), and is funded by the General Assembly of Commonwealth of Virginia. Its main purpose is to expose high school students to topics related to different STEM fields through …

Aligning Best Practices In Student Success And Career Preparedness: An Exploratory Study To Establish Pathways To Stem Careers For Undergraduate Minority Students, Kimberly D. Kendricks, Anthony A. Arment, K. V. Nedunuri, Cadance A. Lowell

Journal of Research in Technical Careers

Undergraduate minority retention and graduation rates in STEM disciplines is a nationally recognized challenge for workforce growth and diversification. The Benjamin Banneker Scholars Program (BBSP) was a five-year undergraduate study developed to increase minority student retention and graduation rates at an HBCU. The program structure utilized a family model as a vehicle to orient students to the demands of college. Program activities integrated best K-12 practices and workforce skillsets to increase academic preparedness and career readiness. Findings revealed that a familial atmosphere improved academic performance, increased undergraduate research, and generated positive perceptions of faculty mentoring. Retention rates among BBSP participants …

Sustainability In Higher Education: Perceptions Of Social Responsibility Among University Students, Younghan Jung, Kayoung Park, Junyong Ahn

Engineering Technology Faculty Publications

Many construction-related training and education programs in the United States have now embraced the concept of sustainability, offering sustainable construction courses that highlight sustainable design and construction practices. These courses have mainly focused on green building strategies for the design and construction of built environments and indoor environmental quality necessary for students’ knowledge enhancement and career development. This study examined the effect of sustainability course on students’ knowledge as well as their perceptions of social responsibility and sustainable behaviors. Data were collected by conducting a survey from construction related programs in U.S. universities. Students were categorized based on their experience …

Instilling An Entrepreneurial Mindset In A New Generation Of First-Year Engineering Students Through A Graphics Course Project, Lulu Sun, Leroy Long Iii

Publications

Each year, an increasing number of engineering start-up companies emerge in the U.S. and around the world. Innovation and entrepreneurship have never been so pronounced, especially in science, technology, engineering, and mathematics (STEM) fields. How can we train engineering students to be more entrepreneurially-minded so they are well-equipped to become global innovators? Engineering educators can use entrepreneurially-minded learning activities to help students develop an entrepreneurial mindset, which is a set of beliefs, attitudes, and behaviors. At a mid-sized Southeastern private institution, we used an open-ended team project and an end-of-semester poster competition within a freshman-level engineering graphics course to encourage …

College Of Engineering Senior Design Competition Fall 2018, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …

Arts Integration Into Elementary Science: Force And Motion And Natural Disasters, Eric C. Ooms, Tabitha M. Wu, Ashley R. Kokemuller, Sarah E. Montgomery, Audrey C. Rule

Journal of STEM Arts, Crafts, and Constructions

This study explored the effect of arts integration into science during an instructional unit on force and motion and one addressing natural weather disasters. Seventy-eight elementary students in four classrooms (grade 5, grade 4, and two at grade 3) participated in the study. This study assessed content retention, student-made products (rollercoasters and hurricane shelters), and student attitudes. All students in each classroom experienced the two units of instruction, one unit in the experimental condition of arts integration and one unit in the control condition without arts integration. Both conditions involved students in constructing models of given materials. Each unit consisted …

Second Grade Students Learn About Civil Engineers And Erosion, Andrea Earline Anderson, Jessica A. Meier

Journal of STEM Arts, Crafts, and Constructions

The integration of art into curricula focused on teaching science is a new perspective in education designed to reach a broader range of students. The current study examined the process of second-grade students participating in science and art activities through qualitative content analysis. The subjects of science and art were not taught to the students separately, rather, students engaged in both subjects simultaneously, in an integrated manner. Participants were 23 second-grade students (11 female and 12 male; age range 7 to 8 years) who were learning about erosion through sketching and creative construction and the work of civil engineers through …

Ecosystem Shake Up: An Environmental Change Adaptation Project, Hannah E. Morgan, Dana Atwood-Blaine, Audrey C. Rule

Journal of STEM Arts, Crafts, and Constructions

This practical article reports an intriguing diorama project for third grade elementary students (ages 8-9 years). Students worked as partners to create dioramas of given ecosystems made in pizza boxes. Then, students rolled a die to determine a change in some environmental factor that affected the ecosystem. The students discussed how this change affected the ecosystem and made a second part of their diorama showing the ecosystem after the change. Finally, students made class presentations concerning their dioramas and ideas. A rubric for assessing the projects is included. Results of this science project indicate that students became deeply engrossed in …

Exploring The Physics Of Sound With Steam-Azing Third Graders, Page L. Foss, Kyrie D. Borsay

Journal of STEM Arts, Crafts, and Constructions

This practical article was based on a lesson conducted with third graders from an elementary school in the Midwest who were studying concepts about sound. The lesson activities address Next Generation Science Standards that include engineering concepts, along with integrating activities that support National Core Arts Standards. The students created instruments that made music but that were not the standard string, percussion or wind orchestral instruments that they had previously studied: string, percussion, or wind. Their instruments made of recycled materials included drum and shaker combinations, animal-shaped instruments, and instruments that combined three or more instruments.

Science Through Art: Motivating Gifted And Talented Students, Ksenia Zhbanova

Journal of STEM Arts, Crafts, and Constructions

Gifted and talented students have unique characteristics and needs. Arts Integration is an effective differentiation strategy that helps meeting these students’ needs. STEM subjects are easily and organically integrated with the Arts because scientific and artistic inquiry are very similar. This practical article describes an arts-integrated project that provided the gifted and talented participants with an increased level of challenge, an opportunity for self-expression and for building social skills, amplified motivation, and a chance to deepen and demonstrate their knowledge of science, technology, engineering, mathematics, social studies and English Language Arts. In this project, identified gifted students completed figural transformations …

Editorial: Arts Integration Allows Students The Opportunity To Be Original, Ksenia S. Zhbanova, Audrey C. Rule

Journal of STEM Arts, Crafts, and Constructions

This editorial explores the other six articles in this issue 2 of volume 3 of the Journal of STEM Arts, Crafts, and Constructions to examine how originality is displayed and supported by art projects. Originality, is a quality or a characteristic of an idea, approach or product. Originality can be defined as newness or novelty. To be classified as original, an idea must be new. It does not have to have a utilitarian value, which is a requirement for an idea to be categorized as creative. Helping students develop originality is important because it allows the freedom to make any …

Implementing Ngss Engineering Disciplinary Core Ideas In Middle School Science Classrooms: Results From The Field, Jessica Gale, Jayma Koval, Mike Ryan, Marion Usselman, Stefanie Wind

Journal of Pre-College Engineering Education Research (J-PEER)

With the inclusion of engineering disciplinary core ideas (DCIs), the Next Generation Science Standards (NGSS) position engineering as a new priority in K–12 science classrooms. This paper reports findings from the implementation of SLIDER, a problem-based learning 8th grade physical science curriculum that integrates engineering and physical science core ideas. As a culminating engineering design challenge, the SLIDER curriculum asks students to apply their understanding of energy, motion, and forces to design an automatic braking system for a robotic truck. The paper describes the curriculum and synthesizes findings from an array of data sources including student design interviews, written design …

Stem Roles: How Students’ Ontological Perspectives Facilitate Stem Identities, Dina Verdín, Allison Godwin, Monique Ross

Journal of Pre-College Engineering Education Research (J-PEER)

Educational researchers have explored the importance of performance, recognition, and interest in establishing and maintaining a STEM identity. Research has also demonstrated that the ways students describe themselves and how they participate in STEM communities can provide insight into their role identity salience; however, there has been little work to explore the ontological beliefs of students about STEM people and how this influences their ability to see themselves as possessing a STEM identity. This research explores the ontological beliefs of high school students, with specific attention to the ways in which they describe what constitutes a math person, science person, …

Nasa Maa (Murep Aerospace Academy) Stem Project At York College: Ensuring Future Stem Pipeline, Nazrul I. Khandaker, Shuayb Siddique, Matthew Khargie, Brandon Dhanraj, Zachary A. Sanichar, Mildred M. Selby, Chabenauth Ramnauth, Theresa Deepan, Yougeeta Singh, Krishna Mahabir, Sashi Singh, Omadevi Singh

Publications and Research

Our ongoing K1-12 NASA-supported STEM activities has served over 5000 children since 2015, largely from groups that are undeserved and underrepresented in the sciences. These STEM activities have been successfully delivered for several years and include earth science, meteorite geology, rocketry, aerodynamics, star gazing, EV3 Mindstorm robotics, basic coding exercises, wind tunnel, 3D-printing, etc., conducted largely through our present MAA (MUREP Aerospace Academy) Project. Corporate funding from the Con Edison and National Grid ensures additional STEM dissemination to the students during the summer operation. Significant positive component of the MAA program is the availability and willingness of the former student …

Developing Serious Games In Engineering Education: Innovation At The Nexus Of Food, Energy, And Water Systems, Nathan Rice

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

At a time when food, energy, and water (FEW) are of the utmost concern to the security and health of the world, an initiative has begun to understand the interactions between these systems. The goal of Innovation at the Nexus of Food, Energy, and Water Systems (INFEWS) is to bring together research fields that typically work in their own silos to solve complex problems increasing the resiliency and sustainability of the FEW system. Stemming from this initiative was a project to produce an educational immersive simulation game to teach youth about how their food is produced, systems thinking, and sustainable …

The Future Is Now Science Club, Shane Stan

Honors Program: Expanded Learning Clubs

The Future is Now! What will our planet look like in 10, 20, 50, or even 100 years? Where will we live, what will we eat, how will we travel? Believe it or not, in the coming decades, many ideas that were once science fiction will come through to realization. With this, many of the discoveries and technologies making all of this happen are being developed right now as we go about our daily lives.

In this club, appropriately titled, The Future Is Now Science Club, students will be inspired to think larger about the present world they live in. …

Taking Professional Development From 2d To 3d: Design-Based Learning, 2d Modeling, And 3d Fabrication For Authentic Standards-Aligned Lesson Plans, Darran R. Cairns, Reagan Curtis, Konstantinos A. Sierros, Johnna J. Bolyard

Interdisciplinary Journal of Problem-Based Learning

There is currently significant interest in 3D fabrication in middle school classrooms. At its best 3D printing can be utilized in authentic design projects that integrate math, science, and technology, which facilitate deep learning by students. In essence, students are able to tinker in a virtual world using 3D design software and then tinker in the real world using printed parts. We describe a professional development activity we designed to enable middle school teachers who had taken part in a three-year Math Science Partnership program to authentically integrate 3D printing into design-based lessons. We include some examples of successful design-based …

Computational Thinking And Literacy, Sharin Rawhiya Jacob, Mark Warschauer

Journal of Computer Science Integration

Today’s students will enter a workforce that is powerfully shaped by computing. To be successful in a changing economy, students must learn to think algorithmically and computationally, to solve problems with varying levels of abstraction. These computational thinking skills have become so integrated into social function as to represent fundamental literacies. However, computer science has not been widely taught in K-12 schools. Efforts to create computer science standards and frameworks have yet to make their way into mandated course requirements. Despite a plethora of research on digital literacies, research on the role of computational thinking in the literature is sparse. …

The 4 C'S Model - A Common Framework For Professional Aviator Development, Kenyatta Hents Ruffin

National Training Aircraft Symposium (NTAS)

The United States Air Force currently has an acute shortage of pilots while simultaneously, the commercial airline industry is currently experiencing unprecedented growth. With 100's of thousands aviation professionals required over the next 15-25 years, the need for a collaborative and comprehensive approach to attract, motivate, and prepare the next generation of aerospace leaders is clear. The 4C's Model presents a partnered civil-military strategy to efficiently and effectively take youth from from the cradle to the cockpit. Through deliberate, engaging activities over the course of four distinct time periods—childhood, college, cockpit, career—with specific outcomes, the 4C's Model provides the National …

Teaching Engineering Design Through Wearable Device Design Competition (Evaluation), Elena N. Veety, Jesse S. Sur, Hannah K. Elliott, James E. Lamberth Iii

Journal of Pre-College Engineering Education Research (J-PEER)

The Wearable Device Challenge was developed at the Nanosystems Engineering Research Center for Advanced Self-Powered Systems of Integrated Sensors and Technologies (ASSIST). The Challenge is rooted in the research and innovation ecosystem of the Center and its vision: to have a transformational impact on the way doctors and patients manage wellness through wearable, self-powered health and environmental monitoring systems. At its core, the program teaches middle and high school teachers and students how to apply the engineering design process to solve real-world problems through a project-based approach. The program impacts several hundred students in North Carolina annually through real-world, relevant, …

The Redshirt In Engineering Consortium: Progress And Early Insights, Janet Callahan, Donna C. Llewellyn, Ann E. Delaney

Materials Science and Engineering Faculty Publications and Presentations

The NSF-funded Redshirt in Engineering Consortium was formed in 2016 with the goal of enhancing the ability of academically talented but underprepared students coming from lowincome backgrounds to successfully graduate with engineering degrees. The Consortium takes its name from the practice of redshirting in college athletics, with the idea of providing an extra year and support to help promising engineering students complete a bachelor’s degree. The Consortium builds on the success of three existing “academic redshirt” programs and expands the model to three new schools. The Existing Redshirt Institutions (ERIs) help mentor and train the new Student Success Partners (SSPs), …

Work In Progress: Institutional Context And The Implementation Of The Redshirt In Engineering Model At Six Universities, Ann Delaney, Donna C. Llewellyn, Janet Callahan

Materials Science and Engineering Faculty Publications and Presentations

Low-income students are underrepresented in engineering and are more likely to struggle in engineering programs. Such students may be academically talented and perform well in high school, but may have relatively weak academic preparation for college compared to students who attended better-resourced schools. Four-year engineering and computer science curricula are designed for students who are calculus-ready, but many students who are eager to become engineers or computer scientists need additional time and support to succeed. The NSF-funded Redshirt in Engineering Consortium was formed in 2016 as a collaborative effort to build on the success of three existing “academic Redshirt” programs …