Science and Mathematics Education Commons^™

Nebraska Summary #1299: Fendt 728 Vario Gen 7.1, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary #1295: Fendt 720 Vario Gen 7.1, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Identifying Potential Consequences Of Use Of A Measure Through Stakeholder Interviews, Melissa G. Kuhn, Joanna K. Garner, Shanan L. Chappell, Linda Bol

STEMPS Faculty Publications

The advent of Messick’s Contemporary Validity Theory (1994) led researchers in survey and measure design to develop and standardize qualitative and quantitative methods of collecting evidence for the validity of psychological instruments. However, one aspect of this theory, consequential validity, has few agreed-upon evidence-gathering methods (Furr & Bachrach, 2014). This study added a blueprint-driven interview method of collecting forecasted consequences of use of an instrument into the overall process of developing a measure of outreach impact on undergraduate engineering students (Authors, in press). The method, which included a purposeful sampling of end-users, is illustrated with thematically presented results. Potential implications …

Nebraska Tractor Test: 2263 John Deere 9r 590 18 Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Tractor Test: 2273 John Deere 5130m Powrquad Plus, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Actividad 3: ¡Advertencia!, Patrick Young

Tema 5: ¿Por qué la gallina cruzó la calle?

En un ciclo de ingeniería y diseño se producen múltiples repeticiones de diseño. Esto es así desde el inicio de la idea hasta la instalación de una estructura de paso para animales. En el diseño hay que tener en cuenta más factores que los mencionados anteriormente, como la temperatura, las precipitaciones, el tráfico de vehículos, el ruido y los gases de escape de los vehículos.

Actividad 3: ¡Construye Rápido!, Patrick Young

Tema 1: Estructura y proceso

Uno de los costos de cualquier proyecto de carretera es el impacto económico de desviar el tráfico durante la construcción. Los métodos que minimizan las interrupciones reducen costos y suelen mejorar la seguridad. Los métodos de construcción acelerada de puentes (ABC, por sus siglas en inglés) incluyen la prefabricación de la mayor parte posible del puente fuera del lugar de la obra. Las piezas grandes se llevan al lugar y se instalan según un plan que minimiza el tiempo necesario para desviar el tráfico.

Activity 4: Testing Student-Made Concrete Decks, Patrick Young

Theme 1: Structure and Process

When a structural beam is loaded from above, the force creates compression on the upper surface and tension on the lower surface. Concrete can withstand ten times as much compression as it can tension. Since concrete is much less capable of supporting tension, it is along the bottom that steel reinforcement is most important.

Activity 3: Traffic Management, David Hernandez, Peg Steffen

Theme 3: Traffic Management

Traffic management in busy urban areas is an extremely complex problem. Issues such as traffic congestion from home to work, suburban growth, preservation of scenic landscapes and historic neighborhoods, and the ability to walk, bike, and access public transit make traffic management a challenge. Traffic Management can include lane closures, detours, pedestrian access, and speed limits. It also includes intersections engineered for safe passage of vehicles in a stream of traffic that must cross each other's paths. Complicating factors for intersections include bikes, pedestrians, and emergency vehicles.

Activity 3: Rooting For You, Karen Ye

Theme 4: Please Pass the Salt

Snow and ice removal are needed in winter for safe roads. Salt is very effective along with other chemicals, but these may cause harm to plants, wildlife, and humans. Salt seeps into groundwater and may create problems with water resources. High levels of salt affects the amount of oxygen in water, organism growth, reproduction, and food sources. Whether the chemicals cause harm to an organism depends on the amount of chemicals and how long the organism is exposed to them. Salt can also reduce soil minerals and absorb water that plants need. Other impacts on plants include leaf damage, stunted …

Activity 1: Cooler Than Me, Karen Ye

Theme 4: Please Pass the Salt

All matter is made up of atoms and molecules. Even though we can’t see them with our bare eyes, these tiny particles are constantly moving. The temperature of a substance is a measure of its average kinetic energy (the energy it has due to the motion of the particles). As the temperature increases, particles gain more energy, move more quickly and spread further apart.

No matter where one lives in Illinois, you are impacted by winter weather. Deicing and snow removal account for a large portion of state and local highway budgets. Salt is commonly used for melting snow and …

Actividad 3: Ayudándote A Crecer, Patrick Young

Tema 4: Por favor, pásame la sal

Es necesario quitar la nieve y el hielo en invierno para que las carreteras sean seguras. La sal, junto con otros productos químicos, es muy eficaz para hacerlo, pero estos pueden ocasionarle daño las plantas, a la vida silvestre y a los seres humanos. La sal se filtra al agua subterránea y puede ocasionar problemas con los suministros de agua. Los niveles elevados de sal afectan la cantidad de oxígeno en el agua, el crecimiento de los organismos, la reproducción y las fuentes de alimentos. La posibilidad de que las sustancias químicas le ocasionen daño a un organismo depende de …

Actividad 4: Consejo De Información, Patrick Young

Tema 3: Tráfico

En 1969, la Encuesta Nacional Sobre los Viajes de las Familias (NHTS, por sus siglas en inglés) comenzó a recopilar información sobre los hábitos de viaje de los estadounidenses. El tipo de transporte utilizado, la duración, la distancia y el propósito del viaje son algunos ejemplos de información recopilada a través de las encuestas. Organizaciones como compañías de seguros y de automóviles, agencias de transporte y el gobierno analizan y utilizan la información para tomar decisiones.

Actividad 4: Invierno Ecológico, Patrick Young

Tema 4: Por favor, pásame la sal

Además de la sal, existen otros materiales que se utilizan para mitigar los peligros del hielo y aumentar la tracción. Estos materiales adicionales incluyen arena, cloruro de calcio y una mezcla de salmuera y jugo de remolacha. El uso de cada método conlleva contrapartidas.

Actividad 1: Crear Una Criatura, Patrick Young

Tema 5: ¿Por qué la gallina cruzó la calle?

La fauna salvaje representa un peligro para los conductores. Los animales implicados en los accidentes de carretera tienen una gran variedad de formas, tamaños, métodos de locomoción, tolerancia al ruido y patrones de migración, así como necesidades de comida, agua y espacio.

Actividad 2: Un Poco De Sal: Folleto Para El Estudiante, Patrick Young

Tema 4: Por favor, pásame la sal

La densidad se define como la cantidad de masa que ocupa una cierta cantidad de volumen. Agregar sal o azúcar al agua aumenta su densidad, ya que hay más partículas (masa) empaquetadas en una cantidad similar de espacio (volumen). El agua de enfriamiento también puede aumentar su densidad, ya que las partículas se mueven más lentamente a temperaturas más bajas y estarán más empaquetadas. Cuando se combinan dos sustancias con diferentes densidades, la de menor densidad flotará mientras que la de mayor densidad se hundirá. Cuanto mayor sea la diferencia de densidad, más distintas serán las capas y más difícil …

Actividad 2: Control De La Ira, Patrick Young

Tema 3: Tráfico

La furia al volante suele ser el resultado de una ira explosiva causada por inconvenientes, incidentes e irresponsabilidad mientras se conduce. En su mayor parte, la furia al volante genera gritos, bocinazos, pegarse al coche de adelante, zigzaguear y bloquear el tráfico. Sin embargo, las muertes por furia al volante están aumentando. Existen estrategias para ayudar a disminuir la furia al volante. Los carteles aéreos advierten sobre el tráfico, el clima y los incidentes de coches o camiones que se avecinan. Las aplicaciones de tráfico y viaje, que ofrecen varias sugerencias de rutas, tiempos de viaje y peligros en la …

Actividad 3: Red De Semáforos, Patrick Young

Tema 3: Tráfico

La organización del tráfico en las zonas urbanas congestionadas es un problema extremadamente complejo. Uno de los desafíos fundamentales tiene lugar en las intersecciones en las que los vehículos de un flujo de tráfico deben cruzarse entre sí. Los factores que complican la situación incluyen bicicletas, peatones y vehículos de emergencia.

Una de las formas más comunes de controlar el derecho de paso en las intersecciones es el semáforo. Es más barato que construir numerosas rampas y pasos elevados, pero restringe el flujo de tráfico básicamente a una dirección a la vez. Un sistema de control activo es útil para …

Actividad 1: Romper El Embotellamiento, Patrick Young

Tema 3: Tráfico

Los modelos informáticos pueden ser excelentes herramientas para analizar sistemas complejos. En esta actividad, los estudiantes utilizarán un modelo informático basado en la web para explorar la relación entre el volumen de tráfico y el tiempo que tardan los vehículos en llegar del punto A al punto B. Luego, utilizarán el modelo para evaluar dos posibles soluciones para su ejemplo particular de congestión del tráfico. Los estudiantes compararán muestras pequeñas con muestras globales para así apreciar los beneficios de utilizar muestras aleatorias grandes.

Activity 3: Build It Fast!, Patrick Young

Theme 1: Structure and Process

One of the costs of any road project is the economic impact of rerouting traffic during the construction. Methods that minimize the disruption will reduce costs and often improve safety. Accelerated Bridge Construction (ABC) methods include prefabricating as much of the bridge as possible at an off-site location. Large parts are brought to the site and installed according to a plan that minimizes the time required to reroute traffic.

Activity 4: Green Winterization, Karen Ye

Theme 4: Please Pass the Salt

Materials other than salt are also used to mitigate the dangers of ice and increase traction. Additional materials used include sand, calcium chloride, and a mixture of salt brine and beet juice. The use of each method involves trade-offs.

Enhancing Student Veterans' Self-Efficacy And Sense Of Belonging In A Targeted Learning Community: Four Years Of Qualitative Results, Anthony W. Dean, Cynthia Tomovic, Vukica Jovanovic, Kim E. Bullington

Engineering Technology Faculty Publications

Eight semesters of qualitative data, collected over four academic years, are presented from a project that resulted in the development of a student professional learning community of high-achieving, low-income engineering and engineering technology student veterans. In the context of this project, student veterans received academic, professional, and financial support that helped them to be successful in school and to prepare them for a career in the STEM workforce. As adult learners, students in this learning community were a vital part of the curriculum development which resulted in increasing the students’ interest and buy-in. Typically, adult learners have lower levels of …

The Impact Of A Multidisciplinary Service-Learning Project On Engineering Knowledge And Professional Skills In Engineering In Engineering And Education Students, Stacie I. Ringleb, Pilar Pazos, Francisco Cima, Isaac Koduah Kumi, Orlando M. Ayala, Krishnanand Kaipa, Jennifer Jill Kidd, Kristie Gutierrez, Min Jung Lee

Mechanical & Aerospace Engineering Faculty Publications

A multidisciplinary service-learning project that involved teaching engineering to fourth and fifth graders was implemented in three sets of engineering and education classes to determine if there was an impact on engineering knowledge and teamwork skills in both the engineering and education students as well as persistence in the engineering students. Collaboration 1 paired a 100-level engineering Information Literacy class in Mechanical and Aerospace Engineering with a 300-level Educational Foundation class. Collaboration 2 combined a 300-level Electromechanical Systems class in Mechanical Engineering with a 400-level Educational Technology class. Collaboration 3 paired a 300-level Fluid Mechanics class in Mechanical Engineering Technology …

Nebraska Summary: S1256 Fendt 722 Vario Gen7, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

How Does Working On An Interdisciplinary Service-Learning Project Vs. A Disciplinary Design Project Affect Peer Evaluators' Teamwork Skills, Isaac Koduah Kumi, Stacie I. Ringleb, Orlando M. Ayala, Pilar Pazos, Francisco Cima, Krishnanand Kaipa, Min Jung Lee, Kristie Gutierrez, Jennifer Jill Kidd

Mechanical & Aerospace Engineering Faculty Publications

Over the course of several semesters, two different project-based learning approaches were used in two undergraduate engineering courses–a 100-level introductory course that covered a general education requirement on information literacy and a 300-level fluid mechanics course. One project (treatment) was an interdisciplinary service-learning project, implemented with undergraduate engineering and education students who collaborated to develop and deliver engineering lessons to fourth and fifth-grade students in a field trip model. The other projects (comparison) involved a team-based design project contained within each class. In the 100-level course, students selected their project based on personal interests and followed the engineering design process …

Development Of A Data Science Curriculum For An Engineering Technology Program, Salih Sarp, Murat Kuzlu, Otilia Popescu, Vukica M. Jovanovic, Zafer Acar

Engineering Technology Faculty Publications

Data science has gained the attention of various industries, educators, parents, and students thinking about their future careers. Statistics departments have traditionally offered data science courses for a long time. The main objective of these courses is to examine the fundamental concepts and theories. However, teaching data science courses has also expanded to other disciplines due to the vast amount of data being collected by numerous modern applications. Also, someone needs to learn how to collect and process data, especially from industrial devices, because of the recent development of Internet of Things (IoT) technologies. Hence, integrating data science into the …

Growing In Stem: Hands-On Education Via Tower Gardening, Jeffrey A. Nowak, Shelby Johnston-Werling

Indiana STEM Education Conference

Sole use of a textbook as the primary source of learning in the middle school setting has been linked to potentially limit students’ conceptual understanding of complex content (Driscoll et al., 1994), while the positive impact of hands-on learning has been well documented (Ekwueme et al., 2015; Satterthwait, 2010). Ideally, when a textbook is used in conjunction with content applied in a hands-on manner, student engagement and understanding of standards-based content are increased. In a grant funded collaboration between the Northeast Indiana STEM Education Resource Center housed at Purdue University Fort Wayne and an East Allen Community Schools middle school …

Teachers' Instructional Strategies In Integrated Stem Education, Yousef Alrashdi, Paul A. Asunda

Indiana STEM Education Conference

Integrated Science, Technology, Engineering, and Mathematics (iSTEM) education has been regarded as a model that provides students with skills necessary for future careers and enhances the economy of nations. Although there is a considerable body of research on the effective educational approaches in iSTEM education including problem-based and project-based learning, the ways teachers implement these approaches remain ambiguous due to a paucity of consensus about how to effectively use iSTEM approaches in classrooms (Thibaut et al., 2018). Additionally, there is a need for further investigation to understand teachers’ instructional strategies and practices in iSTEM education (Bush, 2019). To fulfill this …

Integrated Stem: Impact Of Engineering Design And Computer Science In Stem Labs, Jason Morphew, Ruben Lopez, Amir Bralin, Ravishankar Chatta Subramaniam, Sanjay Rebello, Carina Rebello

Indiana STEM Education Conference

By integrating physics laboratories with engineering design and computer science, students apply physics principles to ill-structured and complex problems, engage in knowledge transfer, and gain interest in STEM. The introductory physics labs at Purdue have been updated to include engineering design and computer science principles that ground physics in authentic problems. Integrated labs have been evaluated using student perception post-surveys, student course performance, interviews, and case-study observations. Preliminary results indicate that integrated physics labs promote transfer, enhanced metacognitive skills, student interest, and motivation.

Innovation In Quantum Pedagogy, Application, And Its Relation To Culture (Iqparc), Zeynep Gonca Akdemir, Dongyang Li, Muhsin Menekse, Mahdi Hosseini, Erica W. Carlson, Nicholas Dang

Indiana STEM Education Conference

Innovation in Quantum Pedagogy, Application, and its Relation to Culture (IQ-PARC) is a team of Purdue faculty, graduate, and undergraduate students who collaborate and work for the National Defense Education Program (NDEP) for Science, Technology, Engineering, and Mathematics (STEM) education, outreach, and workforce initiative programs. We promote a STEM-literate workforce by providing learning opportunities for youth to understand basic principles and applications of quantum concepts through a variety of both face-to-face and online activities. This research brief describes accomplished tasks in the K-12 education space (e.g., quantum-infused middle school curriculum unit) and shares upcoming plans within the project timeline.