Operations and Supply Chain Management Commons^™

Optimization Of Skus' Locations In Warehouse, David Sourek, Vaclav Cempirek

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

Many companies, which deal with warehousing, optimize their warehouses. The main business of these companies is to offer to customers the warehousing services. It is possible to note that these companies are specialized in warehousing. On the other hand, we can find companies, which have as the main business the selling of goods to customers. These companies use the warehouses too but in a little bit different way. The arrangement of their warehouses can be very unsuitable and convenient for optimization. Our paper is focused on optimization of stored goods’ locations based on market basket analysis. The solution of this …

Grid Facilities Design: Dynamic Modular Deployment Of Production, Handling And Storage Resources, Suzanne Marcotte, Benoit Montreuil

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

To survive and thrive in a fast-moving environment, facilities must be designed to show adaptability, flexibility and robustness. As some facilities are depicted by heavy and sophisticated equipment costly and hard to displace, others are composed of moveable workstations with highly flexible workers. In most cases, the trade-off is between the cost of redeploying the resources and the excessive cost of material handling and storage incurred by an inefficient deployment of the resources. We propose a design strategy based on (1) conceiving and designing the facility as a stable grid of modules, (2) dynamically deploying production, storage and handling resources …

Modeling And Optimization Of Radio Frequency Identification Networks For Inventory Management, Atipong Suriya, Jose D. Porter

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

Stock loss and out-of-stocks are outcomes of poorly designed inventory management systems and can lead to significant revenue losses. Inventory management systems (IMSs) based on radio frequency identification (RFID) have the potential to minimize these losses if they are properly designed and deployed. However, the placement of RFID readers to support IMSs is often done on a trial and error basis which is time consuming and results in less than optimal coverage. A methodology to find the optimal location and number of RFID readers in a warehouse facility to ensure a desired level of radio frequency signal coverage was developed …

Real-Time Dock Door Monitoring System Using A Kinect Sensor, Hector J. Carlo, Cristina Pomales- Garcia, Yeiram Martinez

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

This study presents a proof of concept where a single Microsoft Kinect sensor is used for automated monitoring of a dock door in real-time. The proposed system will automatically and in real-time: (1) detect when an object breaches the dock door perimeter, and its corresponding speed and direction, (2) count the number of pallets loaded/unloaded to/from a trailer, (3) record the loading/unloading time of each load, and (4) reconstruct an image of every loading/unloading trip at a dock door, irrespectively of the material handling travel speed and direction. Particular emphasis is given to discussing how to extend the proposed concept …

The 6th Mode Of Transportation, Robert O. Walton

Publications

The five modes of freight transportation are normally characterized as motor carriers, railroads, airlines, water carriers, and pipelines. This paper will attempt to position the Internet as the sixth mode of transportation. This paper compares the strengths and weaknesses of the traditional five modes of transportation against the proposed 6th mode of the Internet. Without including the Internet as a mode of transportation, and tracking the economic value that it adds to the economy, the economic impact of the Internet as a mode is not considered. The recommendation of this study is that the Internet should be added to the …

Implementing Green Roofs On Movie Theaters And Shopping Centers: Business Cases In Profitable Sustainability, Ryan J. Miller

Pomona Senior Theses

This thesis presents the business case for installing green roofs on movie theaters and shopping centers. These businesses can then derive increased profits from the environmental benefits of reduced energy use and increased stormwater retention. After presenting the basic design and benefits of a green roof, the thesis develops stand-alone business plans for a movie theater and shopping center. The author finds that green roofs are a profitable sustainability solution for the commercial enterprise.

Social Media For Supply Chain Risk Management, Xiuju Fu, Rick S. M. Goh, J. C. Tong, Loganathan Ponnanbalam, Xiaofeng Yin, Zhaoxia Wang, H. Y. Xu, Sifei Lu

Research Collection School Of Computing and Information Systems

With the rapid increase of online social network users worldwide, social media feeds have become a rich and valuable information resource and attract great attention across diversified domains. In social media data, there are abundant contents of two-way and interactive communication about products, demand, customer services and supply. This makes social media a valuable channel for listening to the voices from the market and measuring supply chain risks and new market trends for companies. In this study, we surveyed the potential value of social media in supply chain risk management (SCRM) and examined how they can be applied to SCRM …

Decision Trees To Model The Impact Of Disruption And Recovery In Supply Chain Networks, Loganathan Ponnanbalam, L. Wenbin, Xiuju Fu, Xiaofeng Yin, Zhaoxia Wang, Rick S. M. Goh

Research Collection School Of Computing and Information Systems

Increase in the frequency of disruptions in the recent times and their impact have increased the attention in supply chain disruption management research. The objective of this paper is to understand as to how a disruption might affect the supply chain network - depending upon the network structure, the node that is disrupted, the disruption in production capacity of the disrupted node and the period of the disruption - via decision trees. To this end, we first developed a 5-tier agent-based supply chain model and then simulated it for various what-if disruptive scenarios for 3 different network structures (80 trials …

On The Allocation Of Exclusive-Use Counters For Airport Check-In Queues: Static Vs. Dynamic Policies, Mahmut Parlar, Brian Rodrigues, Sharafali Moosa

Research Collection Lee Kong Chian School Of Business

In this paper we propose a static policy for the optimal allocation of a fixed number of exclusive-use check-in counters dedicated to a single flight. We first provide the motivation for considering the static policy by showing that the dynamic policy already available in the literature suffers from the curse of dimensionality. The objective is to minimize the (expected) total cost of waiting, counter operation, and passenger delay costs which we show to be convex in the number of counters allocated. In those cases where the passenger delay cost is difficult to estimate, we propose an alternative formulation and minimize …

Riskvis: Supply Chain Visualization With Risk Management And Real-Time Monitoring, Rick S. M. Goh, Zhaoxia Wang, Xiaofeng Yin, Xiuju Fu, Loganathan Ponnanbalam, Sifei Lu, Xiaorong Li

Research Collection School Of Computing and Information Systems

With increased complexity, supply chain networks (SCNs) of modern era face higher risks and lower efficiency due to limited visibility. Hence, there is an immediate need to provide end-to-end supply chain visibility for efficient management of complex supply chains. This paper proposes a visualization scheme based on multi-hierarchical modular design and develops a supply chain visualization platform with risk management and real-time monitoring, named RiskVis, for realizing better Supply Chain Risk Management (SCRM). A Supply Chain Visualizer (SCV) with a graphical visualization platform is mounted as a part of a SCRM management decision-making dashboard and it provides senior management a …

Materials Education And Research In Art And Design: A New Role For Libraries (Survey Stats), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Education And Research In Art And Design: A New Role For Libraries (Program Sheet), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Education And Research In Art And Design: A New Role For Libraries (Program Booklet), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Education And Research In Art And Design: A New Role For Libraries (Website), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Collection Creation And Administration: A New Role For Libraries (White Paper), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

The Problem/Opportunity: To define, identify, and guide design-based materials collections in academic settings and foster community among those with existing collections and/or those considering creating and supporting one.

Contents and topics:

1. What is a materials collection?
2. Why have a materials collection?
3. Acquisition strategies
4. Organizational approaches
5. Programming possibilities
6. Symposium summary
7. Resources

A Simulation Approach To Airline Cost Benefit Analysis, Massoud Bazargan, David Lange, Luyen Tran, Zhiyuan Zhou

Management, Marketing and Operations - Daytona Beach

In this paper we conduct a cost benefit analyses using simulation for an Airline. This study pertains to using Towbarless Towing Vehicles (commonly referred to as supertugs) to transport aircraft to and from the terminal to airline’s maintenance hangar facility at their hub. This study attempts to investigate the possibility of reducing costs through saving jet fuel by adopting supertugs and identify if their high purchasing costs are justified. This study adopts simulation to analyze the annual savings by studying the numbers needed, as well as the utilization and operation cost for these supertugs. The results are very encouraging, enabling …

Vehicle Minimization For The Multimodal Pickup And Delivery Problem With Time Windows, Benjamin A . Clapp

Theses and Dissertations

The algorithm proposed here is used for heuristic solutions for the Multimodal Multiple Vehicle Routing Problem with Unloading Capacity, Pickup and Dropoff, and Time Windows, solved so as to minimize the number of vehicles used, subject to varying objective function values for each vehicle. The MVRP is simplified and split into a routing problem and a scheduling problem. The routing problem is addressed by Dijkstra's Algorithm. This generates a new network for the second stage of the algorithm. It is assumed that the shortest path is the correct path to use, and shipments each travel unimodally. The scheduling problem is …

Where Next For Supply Chain Management?, Des Lee

Books/Book chapters

Supply chain management (SCM) has been so successful that it is largely taken for granted. Its success has been built on improving three key flows – of product, of money and of information – and on one core principle – core competence. What next for SCM? This article outlines the vulnerabilities that are embedded in modern supply chains and the unintended consequences of outsourcing activities that are not core competences. These consequences are global and have the potential to undermine past achievements. Finally, broad suggestions are made as to how these issues can be addressed and the areas on which …

Modeling Of Biorefinery Supply Chain Economic Performance With Discrete Event Simulation, Joseph S. Amundson

Theses and Dissertations--Manufacturing Systems Engineering

As competition for fossil fuels accelerates, alternative sources of chemicals, fuels, and energy production become more appealing to researchers and the layman. Among the candidates to fill this growing niche is lignocellulosic biomass. Many researchers have examined supply chain design and optimization for biofuel and bioenergy production throughout the years. However, these models often fail to capture the variability and uncertainty inherent to the biomass supply chain. Multiple factors with high degrees of stochasticity can have major impacts on the performance of a biorefinery: weather, biomass quality, feedstock availability, and market demand for products are just a few. To begin …

Manufacturing Strategy & Operations: Reflections On Key Current Issues: Challenges And Associated Human Resource Implications, Lorraine Mcgrath

Books/Book chapters

This chapter evaluates the current issues and challenges in defining a company’s manufacturing strategy and its production operations in consideration of the contemporary shift to low cost manufacturing locations. Competitive priorities of cost, quality, delivery and flexibility are reviewed. The structural and infrastructure elements of a manufacturing strategy are outlined. Mitigating risks in a global arena are reviewed. Collaborative efforts, including the cultural and personality issues of being human are included in the discussion of managing diversity in such a highly competitive and challenging enterprise resource planning environment.

Evaluating Food Safety Systems Development And Implementation By Quantifying Haccp Training Durability, Marienne A. Anandappa

Theses and Dissertations--Animal and Food Sciences

HACCP-based food safety programs have been widely acclaimed, accepted and implemented as an effective means of managing food safety risks. While HACCP training is a cornerstone of managing HACCP programs, there is little information about the effectiveness of HACCP training and the durability of HACCP knowledge. Findings reveal a link between involvement level in HACCP activities and the accuracy of HACCP knowledge over time. Opportunities for peer training in HACCP, irrespective of overall experience in the food industry provide favorable circumstances for maintaining accuracy of HACCP knowledge. The optimal window for engaging employees in HACCP is directly following the completion …

Modelling Engineering Change Management In A New Product Development Supply Chain, Krishna R. Reddi, Young B. Moon

Mechanical and Aerospace Engineering - All Scholarship

The changes within a new product development (NPD) process are handled differently depending on the stage of the project. The changes during the initial stages of the project are addressed by design iterations, while the changes after the product design is complete are addressed using a formal engineering change management (ECM) process. The ECM process is a complex process, especially under a collaborative environment, where various independent entities work together for a common cause of product development. The interactions between the NPD and ECM processes have rarely been investigated in the research community. In this paper, we attempt to study …

Product Lifecycle Management: Measuring What Is Important - Product Lifecycle Implementation Maturity Model, Abram Walton, Cynthia Tomovic, Michael Grieves

STEMPS Faculty Publications

Industry reports that benefits of PLM are difficult to assess because the same benefit can be expressed as a function of time, cost, quality, or any combination. Based on a review of the PLM literature in an earlier study, a PLM Process Model and an initial list of PLM related metrics was generated and later confirmed through interviews with experienced PLM users. In the current study, the original PLM Process Model was refined and the list of metrics was subjected to an exploratory factor analysis in which specific metrics were found to be related to one of four factors: Inputs, …

Using Modelling And Simulation To Improve Elderly Care In Ireland: A Case Study, Mohamed Ragab, Wael Rashwan, Waleed Abo-Hamad, Amr Arisha

Articles

Health care services both globally and domestically - are encountering critical issues due to the increasing demand for services at the time of economic recession. Hospital performance is subject to many constraints, and planning is made more difficult by the complexity and uncertainty of demand. Population ageing is creating immense pressures on healthcare facilities across the world, leaving them struggling to cope with the growing demand for elderly healthcare services. Current demand-supply gaps result in prolonged waiting times for patients and substantial cost burdens for healthcare systems due to delayed discharges. This paper reports on a project that uses modelling …

Design And Implementation Of Erp Software In Material Supply Chain Management For Siix Corp., Xing'er Chen

World Maritime University Dissertations

No abstract provided.

Extendsim-Based Research On Transport Process Optimization Of Emergency Cold-Chain Logistics, Ran Zhang

World Maritime University Dissertations

No abstract provided.

Agent Based Modeling And Simulation Framework For Supply Chain Risk Management, Tiffany J. Harper

Theses and Dissertations

This research develops a flexible agent-based modeling and simulation (ABMS) framework for supply chain risk management with significant enhancements to standard ABMS methods and supply chain risk modeling. Our framework starts with the use of software agents to gather and process input data for use in our simulation model. For our simulation model, we extend an existing mathematical framework for discrete event simulation (DES) to ABMS and then implement the concepts of variable resolution modeling from the DES domain to ABMS and provide further guidelines for aggregation and disaggregation of supply chain models. Existing supply chain risk management research focuses …

Impact Of Rotated Aisles On Travel Distance In Manufacturing Facilities, Dale Masel, Samantha Hedges

12th IMHRC Proceedings (Gardanne, France – 2012)

To design a facility, expected flows between the resources is one of the most important input. Flows are usually calculated given some statistics of previous periods or from the expected demand and the process required. However, in a refurbishing and recycling facility, flows are very fluctuating and not trivial to predict. The quantity produced by such facility not only depends on the demand but also on the supplies which are returned products under guaranty or discarded products after their end-of-use. The uncertainty and the variability on these supplies are often higher than the one on the demand which makes it …

Simulation-Based Performance Improvement Of A Defense Logistics Warehouse, Banu Y. Ekren, Gerald W. Evans, Sunderesh S. Heragu, John S. Usher

12th IMHRC Proceedings (Gardanne, France – 2012)

Warehouses play a critical role in supply chains. They serve as a vital link between manufacturers and customers. In this study, we investigate performance of the largest warehouse (Eastern Distribution Center - EDC) of the Defense Logistics Agency (DLA) located in New Cumberland, PA and propose a near optimum design for the receiving area of the warehouse to improve its performance. First, we develop a simulation model of the system. Second, we interface an optimization model with the simulation in order to optimize the number of people working at the induction stations. In the optimization model, our goal is to …

Optimal Design Of Container Terminal Layout, Debjit Roy, Ren´E De Koster

12th IMHRC Proceedings (Gardanne, France – 2012)

Due to rapid growth in foreign trade using sea vessels, there is a growing focus in improving the infrastructure and operational efficiencies at the container terminals. Particularly, the operational responsiveness of loading and unloading of containers, affects the vessel idle times and profitability of the shipping liners. In this research, we deter- mine optimal stack layout design, which minimizes the container unload times using Automated Guided Vehicles (AGVs). To analyze alternate stack layout designs, we develop integrated queuing network models that capture the stochastic interactions among the container terminal processes (quayside, vehicle transport, and stack side), and provides realistic estimates …