Architectural Engineering Commons^™

Quantification Of Heat Flows Through Building Entrance Doors On A Winter Day, Daeho Kang

Publications and Research

The current methods for the prediction of the heat flow through building entrance doors have been used for years while involved with a certain degree of uncertainty. This paper describes an experimental method that accurately quantified such heat flow. The experiment monitored local environmental parameters in a college building on a cold winter day. The results of the experiment demonstrated that the experimental method is viable to accurately estimate the heat flow throughout the entrance doors and the presence of a vestibule moderated heat losses from the conditioned area. The results will be used for validating the existing methods.

Daylight Illuminance In Classrooms Adjacent To Covered And Uncovered Courtyards Under The Clear Sky Of Najran City, Saudi Arabia, Abdultawab M. Qahtan

Emirates Journal for Engineering Research

Daylight penetrating the classrooms makes students efficient, improves overall health and increases energy efficiency. In the hot regions, the concept of courtyards in buildings is deeply linked to the architecture as a sustainable solution to daylight indoors without negatively affecting the building cooling loads in the summer. Najran University has existing courtyards in college buildings. Recently, the university covered the courtyards using PVC canvas. This study aims to investigate and compare the daylight illuminance in classrooms adjacent to covered and uncovered courtyards. A case study of four classrooms in the College of Engineering was investigated under the clear sky of …

Workforce Development Through Online Experiential Learning For Stem Education, Arefeh Mohammadi, Kevin Grosskopf, John Killingsworth

Durham School of Architectural Engineering and Construction: Faculty Publications

The U.S. workforce is increasingly comprised of older adults, women, and minorities who lack basic skills and are unable to acquire these skills through traditional educational and training programs. New approaches are needed to provide effective training to the adult learner and flexible support for nontraditional students who must balance work-life demands with limited educational opportunities. Contextualized teaching and learning (CTL) is a form of experiential learning that blends both basic skills and occupational training together in environments that allow students to relate subject matter to real-world situations. Virtual CTL environments can be created to better engage students, provide immediate …

Development Of A Framework To Support The Effective Adoption Of Bim In The Public Sector: Lessons For Ireland, Shiyao Kuang, Alan Hore, Barry Mcauley, Roger West

Conference papers

Building Information Modelling (BIM) has been formally adopted by many countries with the promise of creating greater economic, social and sustainability benefits. Several authors and institutions have presented alternative BIM policies and tactics which have been adopted by developed countries. However, there is evidence to indicate that BIM adoption theories are not well established and, in particular, the linkage between BIM public sector adoption strategy outcomes and their contribution to achieving Government policy objectives are underdeveloped. This paper will present the outcome of the first phase of a systematic literature review of published studies (including journal papers and noteworthy international …

Analysis Of The System Response Of A Spray Passive Downdraft Evaporative Cooling System, Daeho Kang, Richard K. Strand

Publications and Research

A spray Passive Downdraft Evaporative Cooling (PDEC) system achieves great savings for space cooling and improves indoor environmental quality by supplying a large amount of fresh outdoor air. As previous studies heavily focused on the energy saving capability of a spray PDEC system due to lack of methods for a detailed analysis, the influence of cool humid supply air from a spray PDEC system in a space in buildings has not been comprehensively studied. This study is intended to evaluate the competence of a spray PDEC system as a primary cooling system in typical spaces in a primary school building …

Full Functionality And Recovery Assessment Framework For A Hospital Subjected To A Scenario Earthquake Event, Emad M. Hassan, Hussam Mahmoud

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Modeling the recovery process of a community's infrastructure after the occurrence of extreme events is now at the forefront of research. Estimating post-disaster recovery of either single or multiple infrastructure in a community requires proper flow and interaction of information of the physical, economic and social components of the involved sectors. Understanding this recovery process is essential, particularly for critical infrastructure, such as a hospital, which is vital for a community's well-being. In this study, the full seismic functionality and recovery process of a six-story hospital, located in Memphis, TN, is quantified and assessed using a comprehensive 3-D finite element …

Investigation Of Grout - A Comparison Of Standard Grout Mix To Self-Consolidating Grout Mix, Rachel Garcia Chandler

Architectural Engineering

Masonry is a major structural material for low rise buildings, however the design of masonry buildings is rarely taught as a formal course at most universities. As part of the educational experience and to become familiar with the specifications and testing procedures for grouted masonry, a student run experiment on varying the water to cement ratio of masonry grout was conducted. The purpose is to report on the effects of changing the water-to-cement (W/C) ratios in a standard grout mix. The typical W/C ratio is approximately 0.80:1.00. In order to show the effects of increasing water in a grout mix, …

Reduce, Reuse, Reengineer, Neil Ryan Robertson, Anthony James Beers

Architectural Engineering

Our senior project is a research exploration of renewable energy. We recognized there is a major need in the world for the advancement of green power sources. For our project, we wanted to go beyond what we have learned in our Cal Poly architectural engineering classes and to use some of our own creativity to investigate the possibilities of renewable energy from a structural perspective. The guiding question we asked ourselves was, “as architectural engineering students, how could we shift our world to use more renewable energy?” To start our journey off, was the original inspiration from the work of …

Pedestrian Bridge In Tanzania, Maja Sagaser, Karina Rosales

Architectural Engineering

This senior project originated to address the need of the community of Same, Tanzania. There is a deep and wide ravine which floods, making the path many adults and children take to the Majevu Primary School increasingly difficult and dangerous. This report encapsulates all of the steps taken to complete an approved final design for a footbridge to be constructed over this ravine. It includes the project overview, the architectural and structural design process, as well as the important considerations. There are also structural drawings that include plans, elevations, and details.

Steel Test Set-Up For Non-Ductile Concrete Shear Walls, Colin S. Ridgley

Architectural Engineering

The purpose of this project was to provide a robust test set-up for the thesis work being conducted by graduate students, Jerry Luong & Rory de Sevilla. Their research aims to evaluate the feasibility of using fiber-reinforced polymer wraps and splay anchors to retrofit non-ductile concrete shear walls through a series of tests on reinforced concrete walls.

Four key constraints governed the design of the test set-up. First, the wall can be cyclically, laterally loaded to develop data for comparison with theoretical analysis methods. Second, the wall can be axially loaded to simulate interaction effects and prevent a sliding failure …

On The Inference Of The State Of Turbulence And Mixing Efficiency In Stably Stratified Flows, Amrapalli Garanaik, Subhas K. Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Scaling arguments are presented to quantify the widely used diapycnal (irreversible) mixing coefficient Γ = ∈PE/∈ in stratified flows as a function of the turbulent Froude number Fr = ∈/Nk. Here, N is the buoyancy frequency, k is the turbulent kinetic energy, ∈ is the rate of dissipation of turbulent kinetic energy and ∈PE is the rate of dissipation of turbulent potential energy. We show that for Fr≫1, Γ ∝ Fr^-2, for Fr∼ O (1), Γ ∝ Fr^-1 and for Fr ≪ 1, Γ ∝ Fr⁰. These scaling results are tested using high-resolution direct numerical …

Automated Generation Of Daily Evacuation Paths In 4d Bim, Kyungki Kim, Yong-Cheol Lee

Durham School of Architectural Engineering and Construction: Faculty Publications

Spatial movements of workers and equipment should be carefully planned according to project plans. In particular, it is crucial for workers’ safety to prepare emergency evacuation paths according to changing construction site configurations and construction progress. However, creating evacuation paths for all crews for each day can be an extremely labor-intensive task if it is done manually. Consequently, in most construction projects, evacuation plans are not provided to managers and crews throughout the entire construction. Even state-of-the-art technologies do not suggest ways to generate evacuation paths according to changing progresses presented in 4-Dimensional Building Information Model (4D BIM). This research …

The Timber Buckling Restrained Brace Frame, Jessica Resta

Architectural Engineering

With the increasing awareness on the topic of earthquake resistance, efficient, cost-effective, and environmentally friendly solutions in the structural field are on the rise. The purpose of this report is to investigate the Timber Buckling Restrained Brace (TBRB), a new lateral-resisting element made of steel and lumber, applicable in residential and small commercial units. In addition to the TBRBs’ materials being readily available, the braces are easy to manufacture, reducing overall costs of production and transportation. The brace, made partly of wood, has also a low environmental impact when compared to other lateral force resisting elements like concrete shearwalls or …

Design And Fabrication Of Automatic Single Axis Solar Tracker For Solar Panel, Ghazanfar Mehdi, Naveed Ali, Shafquat Hussain, Asad A. Zaidi, Ahmer Hussain Shah, M. Mustafa Azeem

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Sun energy is a considered to be one of most promising sources to address the world energy crises. Photovoltaic cell is one of the prominent sources of energy. The most important factors that affect the efficiency of solar cells are cell temperature, maximum power point tracking (MPPT) and energy conversion efficiency. The optimization of these factors improves solar cells efficiency for more reliable applications. This study associated by means of the designing and manufacturing process of single axis tracker device by using photo voltaic conversion panels. This solar tracker system assures the conversion optimization of electricity from the source of …

Aei Student Design Competition: Value Engineering & Design Build, Vincenzo Paolo Guidi

Construction Management

The Architectural Engineering Institute puts on a yearly student design competition that features interdisciplinary teams from colleges across the country. The project for the competition was the Jack H. Miller Center for Musical and Performing Arts on the Hope College campus in Holland Michigan. The main challenges in the problem statement address acoustics, using mass timber, and add alternative roof top space. Through a collaborative process, our team created a proposal that addressed the challenges and why we were the best fit for the job. I worked with a fellow construction management student, Shannon Wheeler, to produce our portion of …

Building Homes And Hopes In Bangalore, India, Sherry S. Saroufeem

Construction Management

Habitat for Humanity Global Village is an organization that continuously sends volunteers to work on construction projects around the world. My team and I were chosen to go to a village in Bangalore, India, where we dug and poured home foundations for three families in need. Given the opportunity to combine my love for construction and my passion for helping those in need, I was certain that this was the senior project for me. I wanted the capstone of my college educational experience to reflect a hands-on approach, where I had the opportunity to make a difference and see an …

The Bridge Newsletter Spring 2019, Missouri University Of Science And Technology

The Bridge Newsletter

-Building better aerogels
-Bridge repair needs
-Incoming ASCE President speaks

Near-Field Mean Flow Dynamics Of A Cylindrical Canopy Patch Suspended In Deep Water, Jian Zhou, Subhas K. Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The time-averaged flow dynamics of a suspended cylindrical canopy patch with a bulk diameter of D is investigated using large-eddy simulations (LES). The patch consists of Nc constituent solid circular cylinders of height h and diameter d, mimicking patchy vegetation suspended in deep water (H/h ≫ 1, where H is the total flow depth). After validation against published data, LES of a uniform incident flow impinging on the canopy patch was conducted to study the effects of canopy density (0.16 ≤ φ = Nc(d/D)² ≤ 1, by varying Nc) and bulk aspect ratio (0.25 ≤ AR = h/D ≤ …

Controlled Release Chemical Oxidation: Sodium Persulfate Encapsulated In Pvac Polymer, Mosarrat Samiha Kabir

Theses

In this study, sodium persulfate was encapsulated in polyvinyl acetate (PVAc) polymer to investigate the potential of activated persulfate to remediate total coliform and E. coli bacteria from contaminated water through a control release system. Controlled release structures were produced with the polymer and persulfate melted to form pellets at two different baking times. CRP structures containing 60 weight % sodium persulfates blended with 40 weight % polyvinyl acetate (PS- PVAc) were baked for 4 minutes and 10 minutes at 120ºC. The kinetics release of sodium persulfate was studied in a water system and in sand columns. Experimental results showed …

2019 Scholarly Productivity Report, Missouri University Of Science And Technology

Civil, Architectural and Environmental Engineering Scholarly Productivity Reports

No abstract provided.

Ua66/1/5 Ogden College Of Science & Engineering Dean's Office Centers, Wku Archives

WKU Archives Collection Inventories

Records created by and about centers associated with the Dean's office in the Ogden College of Science & Engineering.

Efficient Excitation Of Micro/Nano Resonators And Their Higher Order Modes, N. Jaber, M. A. A. Hafiz, S. N. R. Kazmi, M. H. Hasan, F. Alsaleem, S. Ilyas, M. I. Younis

Durham School of Architectural Engineering and Construction: Faculty Publications

We demonstrate a simple and flexible technique to efficiently activate micro/nano-electromechanical systems (MEMS/NEMS) resonators at their fundamental and higher order vibration modes. The method is based on the utilization of the amplified voltage across an inductor, L, of an LC tank resonant circuit to actuate the MEMS/NEMS resonator. By matching the electrical and mechanical resonances, significant amplitude amplification is reported across the resonators terminals. We show experimentally amplitude amplification up to twelve times, which is demonstrated to efficiently excite several vibration modes of a microplate MEMS resonator and the fundamental mode of a NEMS resonator.

Method Of Monitoring Charge Condition Of Heat Pump System, Fadi M. Alsaleem, Gregg M. Hemmelgarn

Durham School of Architectural Engineering and Construction: Faculty Publications

A heat-pump circuit may include an indoor heat exchanger, an outdoor heat exchanger, a compressor adapted to circulate a working fluid between the indoor and outdoor heat exchangers, and an expansion device disposed between the indoor and outdoor heat exchangers. A monitor for the heat-pump system may include a return-air temperature sensor, a supply-air temperature sensor, and a processor. The return-air temperature sensor may be adapted to measure a first air temperature of air upstream of the indoor heat exchanger. The supply-air temperature sensor may be adapted to measure a second air temperature of air down stream of the indoor …

Atomistic Simulations Of Nanoindentation Response Of Irradiation Defects In Iron, M. Mustafa Azeem, Qingyu Wang, Muhammad Zubair

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Radiation response of a material is a consequence of defects' evolution in any radiation damage event. The radiation-induced defects can significantly alter the mechanical properties of a material. Radiation damage initiates from incident neutron by bombardment on solid material causing production and evolution of Frenkel defects. Since voids are formed due to aggregation of a large number of vacancies that cause dimensional changes and hence irradiation-induced swelling. In order to characterize the effect of irradiation defects, we have performed molecular dynamics (MD) simulations to investigate nanoindentation response of point defects and voids in Fe and their effects on mechanical parameters. …

Voltage And Deflection Amplification Via Double Resonance Excitation In A Cantilever Microstructure, Mohammad H. Hasan, Fadi Alsaleem, Abdallah Ramini

Durham School of Architectural Engineering and Construction: Faculty Publications

Cantilever electrostatically-actuated resonators show great promise in sensing and actuating applications. However, the electrostatic actuation suffers from high-voltage actuation requirements and high noise low-amplitude signal-outputs which limit its applications. Here, we introduce a mixed-frequency signal for a cantilever-based resonator that triggers its mechanical and electrical resonances simultaneously, to overcome these limitations. A single linear RLC circuit cannot completely capture the response of the resonator under double resonance excitation. Therefore, we develop a coupled mechanical and electrical mathematical linearized model at different operation frequencies and validate this model experimentally. The double-resonance excitation results in a 21 times amplification of the voltage …

Benchmarking Image Processing Algorithms For Unmanned Aerial System-Assisted Crack Detection In Concrete Structures, Sattar Dorafshan, Robert J. Thomas, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper summarizes the results of traditional image processing algorithms for detection of defects in concrete using images taken by Unmanned Aerial Systems (UASs). Such algorithms are useful for improving the accuracy of crack detection during autonomous inspection of bridges and other structures, and they have yet to be compared and evaluated on a dataset of concrete images taken by UAS. The authors created a generic image processing algorithm for crack detection, which included the major steps of filter design, edge detection, image enhancement, and segmentation, designed to uniformly compare dierent edge detectors. Edge detection was carried out by six …

Remotely Testing Whether A Climate Control System Controller Is Correctly Installed, Fadi M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

Disclosed are exemplary embodiments of apparatus and methods for remote testing of controllers such as thermostats, to detect incorrect climate control system configuration parameters . In an exemplary embodiment, a computer wirelessly connects with a remote thermostat and sends signal (s) to the thermostat instructing the thermostat to perform climate control function (s) in predefined sequence (s). The computer receives signal (s) from the thermostat indicating whether the thermostat is performing the climate control function (s) in accordance with the sent signal (s). Based on the signal (s) received from the thermostat, the computer determines whether the thermostat is configured …

Need For Aeromedical Evacuation High-Level Containment Transport Guidelines, Shawn G. Gibbs, Jocelyn J. Herstein, Aurora B. Le, Elizabeth L. Beam, Theodore J. Cieslak, James V. Lawler, Joshua L. Santarpia, Terry L. Stentz, Kelli R. Kopocis-Herstein, Chandran Achutan, Gary W. Carter, John J. Lowe

Durham School of Architectural Engineering and Construction: Faculty Publications

Circumstances exist that call for the aeromedical evacuation high-level containment transport (AE-HLCT) of patients with highly hazardous communicable diseases. A small number of organizations maintain AE-HLCT capabilities, and little is publicly available regarding the practices. The time is ripe for the development of standards and consensus guidelines involving AE-HLCT.

Hvac System Remote Monitoring And Diagnosis, Jeffrey N. Arensmeier, Gregg M. Hemmelgarn, Fadi M. Alsaleem, Priotomo Abiprojo

Durham School of Architectural Engineering and Construction: Faculty Publications

A monitoring system for an HVAC system of a building includes a monitoring server located remotely from the building. The monitoring server receives, from a device installed at the building, (i) time-domain current data based on a measured aggregate current supplied to a plurality of components of the HVAC system, and (ii) data based on frequency-domain current data of the measured aggregate current. Based on the received data, the monitoring server accesses (i) whether a failure has occurred in a first com ponent of the plurality of components and (ii) generates a preliminary advisory in response to determining that the …

Strategies And Resources For Government Agencies To Utilize Disadvantaged Business Enterprises In Transportation Design-Build Projects, Baabak Ashuri, Adjo Amekudzi-Kennedy, Stephanie Amoaning-Yankson, Yunping Liang, Yang Cao

Durham School of Architectural Engineering and Construction: Faculty Publications

The Disadvantaged Business Enterprise (DBE) Program was established to provide opportunities for businesses owned and controlled by socially and economically disadvantaged individuals, such as minority-owned and women-owned businesses, to participate in federally funded transportation-related projects. Such DBE participation has increasingly been achieved over the years with the appropriate guidance for traditional project delivery: design-bid-build. However, in recent times the onset of alternative project delivery methods, such as design-build (DB), has introduced challenges for state DOTs trying to implement the DBE program using traditional approaches. This paper presents a synthesis of strategies and resources being used in state DOTs to achieve …