Architectural Engineering Commons^™

The Prevalence Of Six Sigma Trends In The Construction Industry In Pakistan, Muhammad M. Hassan

Masters Theses & Specialist Projects

Economic development in any country or area depends heavily on the performance of the construction industry. This is because the subsequent development of infrastructure increases economic activity, living standards, direct foreign investments, and business opportunities. The construction industry in Pakistan also plays a significant role in its economic activity, and the government’s focus towards increasing infrastructure development provides the construction industry with growth prospects. It is observed that quality management practices in the Pakistan construction industry are highly inadequate to enhance quality. The construction industry there is highly challenged with inadequate delays in projects and project quality. The need for …

Implementing Subspace Identification On Shake Table Model, Zoe T. Cooperband

Architectural Engineering

Stochastic Subspace Identification is a field of applied mathematics that takes collected experimental time-history data and gives out information about the system that produced the data. SSI is typically used in control analysis but here we apply the methods to the modal analysis of structures. This senior project didn’t involve theory - instead much of the work was in research behind how Subspace Identification works, implementing the algorithm in MATLAB, and applying the program to shake table data to validate the program. In other words, building the framework to make SSI a usable tool and practical learning experience for other …

Shrinkage Cracking In Concrete Tilt-Up Construction, Stewart Hooks, Jack Robinson

Architectural Engineering

The purpose of this project is to investigate a particular, undesirable cracking pattern in concrete tilt-up panels that, until now, did not have a known definite cause. The cause of this cracking pattern is hypothesized to be due to shrinkage restraint of the concrete panels. The cracking under investigation occurs at the bottom corners of the Tilt-Up panels, suggesting that the base of the panel is restrained from shrinkage. This project models various components of Tilt-Up Construction that have potential for restraining the panels from shrinking. This project consists of the following main components.

The first aspect of this project …

Dermal Uptake Of Phthalates From Clothing: Comparison Of Model To Human Participant Results, Glenn Morrison, C. J. Weschler, G. Bekö

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this research, we extend a model of transdermal uptake of phthalates to include a layer of clothing. When compared with experimental results, this model better estimates dermal uptake of diethyl phthalate and di-n-butyl phthalate (DnBP) than a previous model. The model predictions are consistent with the observation that previously exposed clothing can increase dermal uptake over that observed in bare-skin participants for the same exposure air concentrations. The model predicts that dermal uptake from clothing of DnBP is a substantial fraction of total uptake from all sources of exposure. For compounds that have high dermal permeability coefficients, dermal uptake …

Modular House Revival, Kevin Chiang, Spencer Dilley, Sarah Dowthwaite, Trevor Houghton, Ryan Lefebvre, Michele Leung, Cameron Lober, Chris Martinez, Katie Mayer

Architectural Engineering

The Modular House, located in Poly Canyon, has seen extensive damage since the last caretaker left nearly ten years ago. To prevent further damage and improve the safety and appeal of the structure, we are proposing a renovation of the existing building that removes the existing cladding and partitions. By the end of Spring Quarter 2017, the Modular House will have a guardrail system replacing the wood paneling on the walls and a new steel composite deck to replace the current flooring system. The structural steel framing system will remain as is.

Numerical Simulations Of Intrusive Gravity Currents Interacting With A Bottom-Mounted Obstacle In A Continuously Stratified Ambient, Jian Zhou, Subhas K. Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this study, the flow dynamics of intrusive gravity currents past a bottom-mounted obstacle were investigated using highly resolved numerical simulations. The propagation dynamics of a classic intrusive gravity current was first simulated in order to validate the numerical model with previous laboratory experiments. A bottom-mounted obstacle with a varying non-dimensional height of D~ = D/ H, where D is the obstacle height and H is the total flow depth, was then added to the problem in order to study the downstream flow pattern of the intrusive gravity current. For short obstacles, the intrusion re-established itself downstream without much distortion. …

Measurements Of Dermal Uptake Of Nicotine Directly From Air And Clothing, G. Bekö, Glenn Morrison, C. J. Weschler, H. M. Koch, C. Pälmke, T. Salthammer, T. Schripp, J. Toftum, G. Clausen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this preliminary study, we have investigated whether dermal uptake of nicotine directly from air or indirectly from clothing can be a meaningful exposure pathway. Two participants wearing only shorts and a third participant wearing clean cotton clothes were exposed to environmental tobacco smoke (ETS), generated by mechanically "smoking" cigarettes, for three hours in a chamber while breathing clean air from head-enveloping hoods. The average nicotine concentration (420 μg/m3) was comparable to the highest levels reported for smoking sections of pubs. Urine samples were collected immediately before exposure and 60-hour post-exposure for bare-skinned participants. For the clothed participant, post-exposure urine …

Irish Bim Study 2017, Barry Mcauley, Alan Hore, Roger West

Articles

The Construction IT Alliance (CitA) recently published its Global BIM Study as part of its BIM Innovation Capability Programme (BICP). The study sought to identify how BIM was being currently addressed in 27 countries across the globe. The study sought to identify the presence of three key ingredients in these countries:

1. Regulatory requirement for BIM

2. Champions driving BIM

3. Noteworthy publications

The report identified a number of recurring themes that would help to shape Ireland’s BIM programme. The report concluded that Ireland should adopt a programme of partnership between industry and the Irish Government in order to affect …

Bicp Global Bim Study - Lessons For Ireland’S Bim Programme, Barry Mcauley, Alan Hore, Roger West

Reports

The Construction IT Alliance (CitA) has been promoting the benefits of digitisation in the construction and engineering industry in Ireland since its formation back in 2002. Whilst the Alliance has always strived to ensure that its members are exposed to a wide spectrum of contemporary digital tools and processes, the concept of Building Information Modelling (BIM) has dominated the focus of its activities over the past five years.

BIM can be described as a digital tool that facilitates everybody to better understand a building or structure through the use of a digital model which draws on a range of data …

Biotransformation Of 2,4-Dinitroanisole By A Fungal Penicillium Sp, Hunter W. Schroer, Kathryn L. Langenfeld, Xueshu Li, Hans Joachim Lehmler, Craig L. Just

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Insensitive munitions explosives are new formulations that are less prone to unintended detonation compared to traditional explosives. While these formulations have safety benefits, the individual constituents, such as 2,4-dinitroanisole (DNAN), have an unknown ecosystem fate with potentially toxic impacts to flora and fauna exposed to DNAN and/or its metabolites. Fungi may be useful in remediation and have been shown to degrade traditional nitroaromatic explosives, such as 2,4,6-trinitrotoluene and 2,4-dinitrotoluene, that are structurally similar to DNAN. In this study, a fungal Penicillium sp., isolated from willow trees and designated strain KH1, was shown to degrade DNAN in solution within 14 days. …

The Bridge Newsletter Spring 2017, Missouri University Of Science And Technology

The Bridge Newsletter

-Bayless retires
-Lifesaving flood relief
-Asphalt expert joins S&T
-First Prakash Lecture

A Review Of Approaches To Solving The Problem Of Bim Search: Towards Intelligence-Assisted Design, Hamed Khademi, Avril Behan

Conference papers

Due to the growing adoption of BIM and the rising popularity of cloud computing, BIM models are increasingly stored in central cloud repositories or Common Data Environments. Effective management and exploitation of these models creates the requirement for BIM retrieval systems. Thus far, the BIM industry has utilized general-purpose, text-based search techniques that operate on BIM metadata. This paper highlights the need for a domain-specific BIM search engine and reviews various approaches to address the problem of BIM search. Three main approaches were identified as context-, geometry-, and content-based BIM retrieval. For a comprehensive BIM retrieval system, all three approaches …

Development Of Vegetation-Pervious Concrete In Grid Beam System For Soil Slope Protection, Xiaohua Bao, Wenyu Liao, Zhijun Dong, Shanyong Wang, Waiching Tang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

One of the most efficient and environmentally friendly methods for preventing a landslide on a slope is to vegetate it. Vegetation-pervious concretes have a promising potential for soil protection. In this study, the vegetation-pervious concrete with low alkalinity was developed and studied. Combined with a grid beam structure system, the stability and strength between the vegetation-pervious concrete and base soil are believed to be enhanced effectively. For improving plant adaptability, the alkalinity of concrete can be decreased innovatively by adding a self-designed admixture into the cement paste. The effects of the admixture content on alkalinity and compressive strength of the …

Development Of Structural-Functional Integrated Energy Storage Concrete With Innovative Macro-Encapsulated Pcm By Hollow Steel Ball, Hongzhi Cui, Waiching Tang, Qinghua Qin, Feng Xing, Wenyu Liao, Haibo Wen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Phase change materials (PCMs) have great potential for applications in energy efficient buildings. In this study, an innovative method of macro-encapsulation of PCM using hollow steel balls (HSB) was developed and the thermal and mechanical performance of PCM-HSB concrete was examined. The macro-encapsulation system (PCM-HSB) was attached with a metal clamp (c) for better mechanical interlocking with the mortar matrix. The latent heat of PCM-HSB-c that can be acquired is approximately 153.1 J/g, which can be considered to rank highly among PCM composites. According to the self-designed thermal performance evaluation, the PCM–HSB-c concrete panel is capable of reducing and deferring …

2017 Scholarly Productivity Report, Missouri University Of Science And Technology

Civil, Architectural and Environmental Engineering Scholarly Productivity Reports

No abstract provided.

Percy H. Perkins, Jr. Architectural Drawings, Zach S. Henderson Library Special Collections

Finding Aids

This collection consists of materials relating to author and gemologist Percy H. Perkins. Materials span 1923 to 1985, and consist of architecture drawings for various significant buildings in southeast Georgia, including a six room schoolhouse in Claxton, GA, Pembroke State Bank, the Stadium & Athletic Field for Morris Brown College, the Women's Dormitory School for Officers’ Training at The Salvation Army Headquarters, Bacon County Elementary School, Claxton High School, and Evans County Training School.

Find this collection in the University Libraries' catalog.

Linking A Dermal Permeation And An Inhalation Model To A Simple Pharmacokinetic Model To Study Airborne Exposure To Di(N-Butyl) Phthalate, Matthew Lorber, Charles J. Weschler, Glenn Morrison, Gabriel Bekö, Mengyan Gong, Holger M. Koch, Tunga Salthammer, Tobias Schripp, Jørn Toftum, Geo Clausen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Six males clad only in shorts were exposed to high levels of airborne di(n-butyl) phthalate (DnBP) and diethyl phthalate (DEP) in chamber experiments conducted in 2014. In two 6 h sessions, the subjects were exposed only dermally while breathing clean air from a hood, and both dermally and via inhalation when exposed without a hood. Full urine samples were taken before, during, and for 48 h after leaving the chamber and measured for key DnBP and DEP metabolites. The data clearly demonstrated high levels of DnBP and DEP metabolite excretions while in the chamber and during the first 24 h …

A Pore Water Pressure Diffusion Model To Predict Formwork Pressure Exerted By Freshly Mixed Concrete, Chan Kyu Park, Jae Hong Kim, Seong Ho Han

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The formwork pressure exerted by freshly mixed concrete is one of the most important considerations in ensuring the safety of construction in the field. The formwork pressure also affects the quality of concrete structures, determining the final shape of concrete members. Previous studies on the form pressure mostly investigated the intrinsic material effect. For example, the use of self-consolidating concrete increases the maximum pressure on the formwork. The extrinsic factor of a formwork system itself has rarely been considered. In the mockup tests and theoretical evaluations, it is identified that the bleed water-out controlled by the formwork tightness is critical. …

Linking Geospatial Engineering Into Collaborative Multidisciplinary Bim Projects - An Educational Perspective, Avril Behan, Helen Murray, Jonathan Argue, Ronan Hogan, Audrey Martin, Pat O'Sullivan, Robert Moore, Malachy Mathews

Conference papers

This paper describes the background to and execution of a postgraduate project undertaken by students on DIT's MSc in Geospatial Engineering (GeoEng) in support of a project on level 2 BIM being undertaken by students on the MSc in applied Building Information Modelling & Management (aBIMM) around the retrofit of and new build extension to the Grangegorman Clock Tower Building. In support of this requirement, an external and internal survey of the existing structure and its surrounding topography was required. The aBIMM students and staff acted as the Design Team who subcontracted the Geo Eng group who were organised into …

Solar Urban Planning: Addressing Barriers And Conflicts Specific To Renewable Energy Policy And The Current Field And Practice Of Urban Planning Within The Context Of A Changing Climate, Toryl P. Hanna

Capstone Collection

The world is in a period of rapid urbanization while experiencing unprecedented rise in global temperature as a result of climate change. Questions have been raised as to how strategies for urbanization will be able to address the fetish for energy, while halting carbon emissions produced by traditional energy sources for urban inhabitants around the world. First, this paper seeks to look to cities, at the intersection of solar energy and the field of urban planning, looking into the opportunities and challenges that are currently surfacing. Conflicts and barriers in traditional urban land use patterns emerge as a topic of …

Dermal Uptake Directly From Air Under Transient Conditions: Advances In Modeling And Comparisons With Experimental Results For Human Subjects, G. C. Morrison, C. J. Weschler, G. Bekö

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

To better understand the dermal exposure pathway, we enhance an existing mechanistic model of transdermal uptake by including skin surface lipids (SSL) and consider the impact of clothing. Addition of SSL increases the overall resistance to uptake of SVOCs from air but also allows for rapid transfer of SVOCs to sinks like clothing or clean air. We test the model by simulating di-ethyl phthalate (DEP) and di-n-butyl phthalate (DnBP) exposures of six bare-skinned (Weschler et al. 2015, Environ. Health Perspect., 123, 928) and one clothed participant (Morrison et al. 2016, J. Expo. Sci. Environ. Epidemiol., 26, 113). The model predicts …

Shear Wave Velocity And Its Anisotropy Of Polymer Modified High-Volume Class-F Fly Ash-Kaolinite Mixtures, X. Kang, B. Bate

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study investigated the effects of polymers on the small-strain stiffness behavior of high-volume Class-F fly ash-kaolinite mixtures. The shear wave velocity (Vs) and its anisotropy of organically modified fly ash-kaolinite mixtures were evaluated using a self-developed floating wall type consolidometer bender element (BE) testing system. Both synthetic polymers [polyethylene oxide (PEO)] and biopolymers (xanthan gum and chitosan) were used to modify the stiffness of fly ash-kaolinite mixtures. Shear waves generated and received by bender elements were measured to quantify the small-strain stiffness of the organically modified fly ash-kaolinite mixtures in three orthogonal directions, i.e., vh, hv, and hh. The …

How Acoustics In California High Performance Schools Relate To Student Achievement, Devin K. Wong

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

This research project seeks to determine if students attending K–12 schools meeting a minimum standard of high performance classroom conditions in the state of California do evidence higher scholastic achievement, based on publically available results on state-wide standardized tests. In three phases, a subset of 200+ schools applying for grants dedicated to building high performance schools over the past decade was correlated with an existing database of achievement scores for all public schools in California. The criteria utilized to specify high performance classrooms was provided by the California High Performance Initiative (HPI) Grant program. Academic achievement was evaluated on a …

Elastic Field And Frequency Variation In Extendable Wind Turbine Blades, Jeswin John, Donald W. Radford, Subhas Karan Venayagamoorthy, Paul R. Heyliger

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The behaviors of tip displacement, maximum stress, and natural frequency of vibration as a function of blade length are investigated for extendable wind turbine blades. A three-dimensional linear elasticity finite-element model of the blade is used along with a typical profile and representative material properties. The quasi-linear response and free vibration behavior are investigated for a sequence of blade geometries. These estimates are intended to give approximate measures of expected changes in the elastic and dynamic field as the operating length changes and provide preliminary guidelines for this novel class of structure.

The Bridge Newsletter Winter 2016, Missouri University Of Science And Technology

The Bridge Newsletter

-World's only cold-formed steel conference
-2016 Alumni of Influence
-National intelligence leader speaks
-Senne Memoria

Theoretical Study Of Two States Reactivity Of No Activation On Iron Atom, Xiaoman Wang, Yaxin Su, Wenyu Liao, Wenyi Deng

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The mechanism of Fe+NO was calculated by the Density Functional Theory (DFT) with the B3LYP methods combined with the 6-311+G (d, p) basis set. The geometry of reactants, transition states, intermediates and products of two reaction systems were completely optimized, and all the transition states were verified by the vibration analysis and intrinsic reaction coordinate (IRC) calculations. The "Two State Reactivity (TSR)" was used to analyze the reaction mechanisms; Results showed that the reaction system preferentially involves low-spin state entrance channel and the high-spin state exit channel. In the reaction channel, the crossing point appears, which would effectively reduce the …

Methamphetamine Absorption By Skin Lipids: Accumulated Mass, Partition Coefficients, And The Influence Of Fatty Acids, K. Parker, G. Morrison

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Occupants of former methamphetamine laboratories, often residences, may experience increased exposure through the accumulation of the methamphetamine in the organic films that coat skin and indoor surfaces. The objectives of this study were to determine equilibrium partition coefficients of vapor-phase methamphetamine with artificial sebum (AS-1), artificial sebum without fatty acids (AS-2), and real skin surface films, herein called skin oils. Sebum and skin oil-coated filters were exposed to vapor-phase methamphetamine at concentrations ranging from 8 to 159 ppb, and samples were analyzed for exposure time periods from 2 h to 60 days. For a low vapor-phase methamphetamine concentration range of …

Mechanical And Thermal Evaluation Of Different Types Of Pcm-Concrete Composite Panels, Dervilla Niall, Oliver Kinnane, Roger West, Sarah Mccormack

Conference papers

ABSTRACT: Thermal mass indicates the ability of a material to store and release heat and is a function of the heat storage capacity of a material. The thermal mass of construction materials can be used to reduce the energy required for heating and cooling buildings. The heat storage capacity of concrete can be increased by incorporating phase change materials (PCMs) into the concrete and hence providing additional latent heat storage capacity. Research was carried out to compare the thermal behaviour of two different types of PCM/concrete composite panels. The first type of panel was formed by adding microencapsulated paraffin to …

Lifelong Housing Design: User Feedback Evaluation Of Smart Objects And Accessible Houses For Healthy Ageing, Matteo Zallio, Niccolò Casiddu

Conference Papers

According to the latest research by the European Community and ISTAT (Italian National Institute of Statistics) surveys, Europe has the highest average age for its population. According to those data, in the near future, it could be necessary to move from a welfare model based on the centralization of care systems, to a system based on the distribution of certain healthcare facilities [1]. This means that the ageing population is ever increasing, thanks to better lifestyles, innovative medical care and wider access to different services. This work seeks to observe and analyse key implications of architectural and interior design features …

The Experiment And Analysis Of Active Mechanisms For Enhancing Heat And Mass Transfer In Sorption Fluids, Ziqi Shen

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

This project was funded by American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE RP-1462). It is a three years’ research, including the literature review, labs construction, experiments and data analysis.

In this thesis, first of all, we conducted literature review of mechanism motion influence on heat and mass transfer and additive effect in absorption chiller. This part helps us understand the basic idea of how mechanism motion affects the heat and mass transfer of sorption fluids and gives us reference on how to select the experiment instrument and the experiment operation range.

In the second part, the instrument selection …