Open Access. Powered by Scholars. Published by Universities.®

Digital Commons Network™

Open Access. Powered by Scholars. Published by Universities.®

2016

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 35521 - 35550 of 35898

Full-Text Articles in Entire DC Network

Data Analysis Of Surfactant-Induced Wettability Alteration In Carbonate Reservoirs, Hao Sun Jan 2016

Data Analysis Of Surfactant-Induced Wettability Alteration In Carbonate Reservoirs, Hao Sun

Masters Theses

"Most carbonate formations prove to be oil-wet due to oil aging effect. Therefore it is essential to employ wettability alteration methods for a more effective enhanced oil recovery process. It is confirmed by researchers that surfactant treatment has positive effects on wettability alteration of carbonate rock, from strong oil-wet to intermediate wet or to even weak water-wet. A number of experiments have the same conclusion and yet, a systematic screening guide development with the support of sufficient data analysis is lacking.

This study involves screening guide development for surfactant-induced wettability alteration method. 199 experiments collected from published literatures are analyzed …


Automated Channel Emulator Based On Mems Switch And Improvement Of Signal Transition, Jingdong Sun Jan 2016

Automated Channel Emulator Based On Mems Switch And Improvement Of Signal Transition, Jingdong Sun

Masters Theses

"Channel Emulator, which is widely used in communication system development, is an instrument that emulates the real-world signal propagation environment between transmitter and. [sic] To overcome the disadvantages of traditional channel emulator, we propose a novel structure of the automated channel emulator in Section 1, which can be controlled by software and integrated into auto-testing system. MEMS switch, with good RF performance, is used to connect and isolate multiple channels.

In Section 2, we divide the whole channel emulator system into Channel, Support, and Controller Board, and provide detailed design procedures with critical parameters of each board. The well-designed high …


Effect Of Reservoirs Heterogeneity On Injection Pressure And Placement Of Preformed Particle Gel For Conformance Control, Ze Wang Jan 2016

Effect Of Reservoirs Heterogeneity On Injection Pressure And Placement Of Preformed Particle Gel For Conformance Control, Ze Wang

Masters Theses

"Preformed particle gels (PPG) have been successfully applied as a plugging agent for plugging fractures and then divert displacing fluid into poorly swept zones. However, PPG propagation and plugging mechanisms through open fractures have not been studied thoroughly.

This work investigated the influence of some factors (particle size, brine concentration, heterogeneity, and brine salinity) on gel injectivity, plugging performance for water flow through open fractures. Five-foot tubes were used to mimic open fractures. Three models were designed to conduct the work, including (1) single fracture with uniform fracture width, (2) single fracture with different widths, and (3) two parallel fractures …


Variable Stress Orientations In The Offshore Nile Delta: The Role Of Salt As A Mechanical Detachment Horizon, Weicheng Zhang Jan 2016

Variable Stress Orientations In The Offshore Nile Delta: The Role Of Salt As A Mechanical Detachment Horizon, Weicheng Zhang

Masters Theses

"The offshore Nile Delta is characterized by variations of the maximum horizontal stress orientation in subsalt and supra-salt sequences. Margin-parallel SH, typical for tertiary deltas, is observed for regions that are below or do not contain evaporites. In sequences underlain by evaporates pre-dominantly margin-normal SH is observed. This observation yielded the first conclusive in situ evidence that salt acts as a mechanical detachment layer. In this study, 3D finite element analysis (FEA) is used to simulate the total stress distribution in the offshore Nile Delta featuring evaporate sequences. Several parameters such as different salt sequence geometries, friction coefficient on faults, …


3d Seismic Structural And Stratigraphic Interpretation Of The Tui-3d Field, Taranaki Basin, New Zealand, Gorkem Yagci Jan 2016

3d Seismic Structural And Stratigraphic Interpretation Of The Tui-3d Field, Taranaki Basin, New Zealand, Gorkem Yagci

Masters Theses

"Identifying seismic structures and stratigraphy are important for exploration of hydrocarbons. The purpose of this study is to discover seismic structural and stratigraphic features and to utilize the results for interpreting depositional environments. A 3D seismic dataset from the Tui-3D Field, the Taranaki Basin, New Zealand with well data were used to visualize structures, to detect stratigraphic features, to identify main lithology, to understand depositional environment, and to describe seismic facies and reflection patterns of the target horizons. The major formations are in the Kapuni Group.

Seismic structural interpretation indicates thirty-two minor faults, which may play an important role in …


A Control Algorithm For The Solar Village Microgrid System, Hamad Ahmed Alharkan Jan 2016

A Control Algorithm For The Solar Village Microgrid System, Hamad Ahmed Alharkan

Masters Theses

"In this thesis, the concept of microgrid system is introduced. Also, the major components of a microgrid will be discussed thoroughly. Both grid-connected and autonomous modes are explained. In addition, the control of a microgrid is defined for the following types: local, centralized and decentralized control.

As one of the nation's premiere research universities, the Missouri University of Science and Technology has built four inspirational solar houses (solar villages) for a competition in the US Department of Energy Solar Decathlon to allow students to research and improve different aspects of the microgrid system. Consequently, this thesis develops a computer model …


Study On The Applicability Of Relative Permeability Modifiers For Water Shutoff Using Numerical Simulation, Dheiaa Khafief Khashan Alfarge Jan 2016

Study On The Applicability Of Relative Permeability Modifiers For Water Shutoff Using Numerical Simulation, Dheiaa Khafief Khashan Alfarge

Masters Theses

"Water production is a challenging problem to be controlled during hydrocarbon-reservoirs production life. Disproportionate Permeability Reduction (DPR) is often used as water shutoff treatment in production wells when other conventional solutions like mechanical isolations are difficult to perform. This study applied numerical simulation methods to diagnose the factors impacting DPR treatment success on macroscopic level and to see when, where and at which conditions DPR treatment can give best results.

This work indicated that the following points should be considered before DPR treatment is executed in any reservoir to get a successful treatment. Firstly, this research explored that DPR performance …


Nathaniel Gist Gee Papers - Accession 395, Nathaniel Gist Gee Jan 2016

Nathaniel Gist Gee Papers - Accession 395, Nathaniel Gist Gee

Manuscript Collection

The Nathaniel Gist Gee Papers consist of various papers concerning Gee’s years in China including correspondence, reports, newspaper and magazine clippings, Chinese poetry, statistics, manifestos, statements, his professional papers concerned primarily with freshwater sponges, and professional papers and publications he collected that chronicle China’s growth. Many of the records are concerned with China’s political and social changes including China’s Nationalist and Student Movements during Gee’s stay in China.

Nathaniel Gist Gee (1876-1937), born in Union, SC, was a professor of Natural Science at Soochow University and Yenching University in China from 1901-1932.


A Statistical Analysis Of A 4.5 Mw Solar Energy Center, Archit Patnaik Jan 2016

A Statistical Analysis Of A 4.5 Mw Solar Energy Center, Archit Patnaik

Masters Theses

"This project helps a regional utility evaluate the performance of their 4.5 MW photovoltaic plant. The performance evaluation consists of characterizing the peak and average power and energy output of the plant over varying time periods. A characterization of the output power drops, or dips, is done by performing a statistical analysis of the photovoltaic plant output data. Dips are characterized by dip frequency, depth of dip, energy loss by dip, and dip duration. The results of this study will help the utility to select appropriate voltage regulating equipment on the basis of dip characteristics, and thus, optimize the performance …


Conceptual Parameters Necessary For Modeling Wettability Alteration In An Enhanced Smart Brine-Chalk System, Ahmed Abdulkareem Hussein Albahrani Jan 2016

Conceptual Parameters Necessary For Modeling Wettability Alteration In An Enhanced Smart Brine-Chalk System, Ahmed Abdulkareem Hussein Albahrani

Masters Theses

"Achieving higher recovery of oil from proven carbonate reserves around the world is not an easy task. One promising new method, especially for carbonate reservoirs, is the use of "Smart Water" technology, which is an injection water with carefully determined, optimal ionic composition and salinity. Recent experiments have shown good recovery results, but the mechanism of wettability alteration by this fluid are still not well understood. The goal of this study is to review the high and optimal salinity and ionic composition literature plus perform dimensional analysis of key variables in order to shed light on the physical and chemical …


Design And Analysis Of An Axisymmetric Aerospike Supersonic Micro-Nozzle For A Refrigerant-Based Cold-Gas Propulsion System For Small Satellites, Abdalla Ali Bani Jan 2016

Design And Analysis Of An Axisymmetric Aerospike Supersonic Micro-Nozzle For A Refrigerant-Based Cold-Gas Propulsion System For Small Satellites, Abdalla Ali Bani

Masters Theses

"The cold-gas propulsion system being developed by M-SAT requires improvements to its original nozzle design. This study documents the research, design, and analysis of a supersonic plug nozzle concept that could be integrated to the refrigerant-based cold-gas propulsion system to possibly improve its performance. As documented in this thesis, CFD analysis showed that the outlined nozzle design method resulted in a feasible nozzle concept that has the ability to out-perform a conventional nozzle of the same area ratio. The flow-fields and thrust of the aerospike nozzle, for the full and truncated nozzles, were investigated. The purpose of this study is …


Voltage Control In A Distribution System Using Active Power Loads, Mounika Chava Jan 2016

Voltage Control In A Distribution System Using Active Power Loads, Mounika Chava

Masters Theses

"High penetration of renewable energy resources such as rooftop solar photovoltaic (PV) systems is exacerbating violations of the voltage limits in power distribution networks. Existing solutions to these over-/under-voltage issues include tap-changing transformers and shunt capacitors. However, tap changers only allow voltage changes in discrete steps and shunt capacitors cannot handle over-voltage situations. To overcome these problems, this thesis proposes voltage control in a distribution system by adjusting active power loads. The proposed solution can be used for both under- and over-voltage cases at any levels of voltage adjustment. First, the active power that needs to be adjusted at selected …


Artificial Neural Network Approach To Predict Blast-Induced Ground Vibration, Airblast And Rock Fragmentation, Raymond Ninnang Tiile Jan 2016

Artificial Neural Network Approach To Predict Blast-Induced Ground Vibration, Airblast And Rock Fragmentation, Raymond Ninnang Tiile

Masters Theses

"Blasting has been widely used as an economical and cheap way of rock breakage in mining and civil engineering applications. An optimal blast yields the best fragmentation in a safe, economic and environmentally friendly manner. The degree of fragmentation is vital as it determines to a large extent the utilization of equipment, productivity and mill throughput. Explosive energy, besides rock fragmentation, creates health and safety issues such as ground vibration, air blast, fly rock, and back breaks among others. As a result, the explosive energy impacts structures and buildings located in the vicinity of the blasting operation, and causes human …


Fluid Flow Through Deformation Band, Huining Zhang Jan 2016

Fluid Flow Through Deformation Band, Huining Zhang

Masters Theses

"Cataclastic deformation bands, which are common in porous sandstone, have the potential to restrict fluid flow. Geological studies have shown that permeability of deformation band shear zones can be one to five orders of magnitude less than for the sandstone host rock. However, recent studies based on simplified analytical estimates have shown that fluid flow in jointed deformation bands may not be retarded since joints play an important role in conducting fluids. In this study, 2 dimensional finite element analysis (FEA) is used to simulate the total discharge flow rate through jointed deformations. Variations of single planar and conjugate jointed …


De-Embedding Method For Electrical Response Extraction Of Through-Silicon Via (Tsv) In Silicon Interposer Technology And Signal Integrity Performance Comparison With Embedded Multi-Die Interconnect Bridge (Emib) Technology, Qian Wang Jan 2016

De-Embedding Method For Electrical Response Extraction Of Through-Silicon Via (Tsv) In Silicon Interposer Technology And Signal Integrity Performance Comparison With Embedded Multi-Die Interconnect Bridge (Emib) Technology, Qian Wang

Masters Theses

"Traditional two-dimensional system-in-package (2D SiP) can no longer support the scaling of size, power, bandwidth, and cost at the same rate required by Moore's Law. Three-dimensional integrated circuits (3D-ICs), 2.5D silicon interposer technology in which through silicon vias are widely used, are implemented to meet these challenges. Embedded multi-die interconnect bridge (EMIB) technology are proposed as well.

In Section 1, a novel de-embedding method is proposed for TSV characterization by using a set of simple yet efficient test patterns. Full wave models and corresponding equivalent circuits are provided to explain the electrical performance of the test patterns clearly. Furthermore, broadband …


Study Jitter Amplification Of A Passive Channel And Investigation Of S₂₁ Magnitude Extraction Methodologies Using A Pattern Generator And Oscilloscope, Xinyun Guo Jan 2016

Study Jitter Amplification Of A Passive Channel And Investigation Of S₂₁ Magnitude Extraction Methodologies Using A Pattern Generator And Oscilloscope, Xinyun Guo

Masters Theses

"Recently the clock channel jitter amplification has been observed in several publications. Currently in many high-speed I/O systems, to avoid the cost and the complex clock recovery circuit design, people use traces forwarding clock signal from transmitting IC to receiving IC. When these clock traces are long enough, the amount of attenuation will induce not only inter-symbol-interference (ISI) but also modulate with the input jitter. Eventually it will lead some type of jitter been amplified after the channel. Similarly, the high speed communication channel (data channel) will also face this issue. Since there are no studies on the jitter amplification …


Developing An Idealistic Model To Characterize And Optimize A Photovoltaic Battery Systems, Pavani Reddy Nalladimmu Jan 2016

Developing An Idealistic Model To Characterize And Optimize A Photovoltaic Battery Systems, Pavani Reddy Nalladimmu

Masters Theses

"Solar energy is one of the most abundant and clean energy sources of renewable energy. Due to its unsteady nature, most photovoltaic systems require a solar storage system. Ultracapacitors have proven to be an effective solar energy storage component due to their wide range of input voltages and high power density. This research focuses on characterizing the performance of a PV/UCAP hybrid storage system to meet required household loads at various locations throughout the US as a backup energy source. A calibrated empirical model was developed to characterize system performance. A load profile was designed based on a typical 2 …


Evaluating Completion Performance For Gas Wells In The Upper And The Lower Montney Formation, Canada, Omar Qasim Mohammed Jan 2016

Evaluating Completion Performance For Gas Wells In The Upper And The Lower Montney Formation, Canada, Omar Qasim Mohammed

Masters Theses

"Identifying the key drivers for success of multiple fractured horizontal wells is not straightforward, especially in unconventional reservoirs like the Montney. Al-Alwani et al. (2015) provided a statistical analysis of Montney completions based on publicly available data. They showed that for the entire well population, cumulative gas recovery per stage, declines as the number of completed stages increase. However, their statistical analysis did not differentiate between completions in the Upper/Middle/Lower Montney, and did not include perforation cluster data.

This work documents the statistical analysis of 296 cased-hole horizontal gas well completions reported in the Upper and the Lower Montney. The …


Deterministic Simulation Of Thermal Neutron Radiography And Tomography, Rajarshi Pal Chowdhury Jan 2016

Deterministic Simulation Of Thermal Neutron Radiography And Tomography, Rajarshi Pal Chowdhury

Masters Theses

"In recent years, thermal neutron radiography and tomography have gained much attention as one of the nondestructive testing methods. However, the application of thermal neutron radiography and tomography hindered by their technical complexity, radiation shielding, and time-consuming data collection processes. Monte Carlo simulations have been developed in the past to improve the neutron imaging facility's ability. In this present work, a new deterministic simulation approach has been proposed and demonstrated to simulate neutron radiographs numerically using a ray tracing algorithm. This approach has made the simulation of neutron radiographs much faster than by previously used stochastic methods (i.e Monte Carlo …


Radiation Noise Source Modeling And Near-Field Coupling Estimation In Rf Interference, Liang Li Jan 2016

Radiation Noise Source Modeling And Near-Field Coupling Estimation In Rf Interference, Liang Li

Masters Theses

"With increasing complexities and shrinking size of modern electronic devices, the near-field RF interference issues are becoming challenging for RF-digital mixed circuit design. Predicting the coupling from digital module to RF antennas and mitigating RF interference is important to the system performance. The ultimate goal of this study is to address the desensitization issues existing in modern electronic devices that have mixed high speed digital-RF circuits, such as cellphone and wearable devices.

In order to estimate the near-field noise coupling from digital module to RF antennas, the noise source is anticipated to be replaced by its equivalent radiation model which …


Characterization Of Fracture Initiation In Non-Cylindrical Buckle Folds Using 3d Finite Element Analysis, Eli Jacob Steinbeck Jan 2016

Characterization Of Fracture Initiation In Non-Cylindrical Buckle Folds Using 3d Finite Element Analysis, Eli Jacob Steinbeck

Masters Theses

"The spatial distribution of fracture sets associated with buckle folds has been well documented in field studies. There are difficulties, however, in placing accurate constraints on the timing of the initiation of individual fracture sets during the deformation history of the fold under in-situ conditions. This study investigates specific conditions that give rise to the initiation of various fracture sets in the hinge and limb of a pericline, based on an analysis of the effective stress evolution during the processes of buckling and erosional unloading. A 3D finite element modeling approach is used to simulate the effective stress evolution in …


Carbon Transfer From Magnesia-Graphite Ladle Refractories To Ultra-Low Carbon Steel, Andrew Arthur Russo Jan 2016

Carbon Transfer From Magnesia-Graphite Ladle Refractories To Ultra-Low Carbon Steel, Andrew Arthur Russo

Masters Theses

"Ultra-low carbon steels are utilized in processes which require maximum ductility. Increases in interstitial carbon lower the ductility of steel; therefore, it is important to examine possible sources of carbon. The refractory ladle lining is one such source. Ladle refractories often contain graphite for its desirable thermal shock and slag corrosion resistance. This graphite is a possible source of carbon increase in ultra-low carbon steels. The goal of this research is to understand and evaluate the mechanisms by which carbon transfers to ultra-low carbon steel from magnesia-graphite ladle refractory.

Laboratory dip tests were performed in a vacuum induction furnace under …


Managing Risks Of Market Price Uncertainty For A Microgrid Operation, Sriram Raghavan Jan 2016

Managing Risks Of Market Price Uncertainty For A Microgrid Operation, Sriram Raghavan

Masters Theses

"After deregulation of electricity in the United States, the day-ahead and real-time markets allow load serving entities and generation companies to bid and purchase/sell energy under the supervision of the independent system operator (ISO). The electricity market prices are inherently uncertain, and can be highly volatile. The main objective of this thesis is to hedge against the risk from the uncertainty of the market prices when purchasing/selling energy from/to the market. The energy manager can also schedule distributed generators (DGs) and storage of the microgrid to meet the demand, in addition to energy transactions from the market. The risk measure …


Exhumation Of The Nacimiento Block: A Thermochronologic Analysis, Lisa Marie Arnold Lori Jan 2016

Exhumation Of The Nacimiento Block: A Thermochronologic Analysis, Lisa Marie Arnold Lori

Masters Theses

"Through the analysis of both U-Pb and (U-Th)/He ages from detrital zircon grains we can constrain thermal histories by establishing ages which correspond to crystallization and exhumation events, respectively. This combined geo-/thermochronologic approach is used here to constrain the history of the polyphase Nacimiento fault. This fault traverses central and southern California and has accumulated at least 150 km of slip since Late Cretaceous time. Major displacements along the structure occurred between 75 and 56 Ma, with Neogene to Holocene strike-slip remobilization linked to the San Andreas fault system. Detrital zircon U-Pb geochronology from Franciscan subduction assemblages west of the …


Multifunctional Wearable Epidermal Device For Physiological Signal Monitoring In Sleep Study, J V M S Avinash Kankipati Jan 2016

Multifunctional Wearable Epidermal Device For Physiological Signal Monitoring In Sleep Study, J V M S Avinash Kankipati

Masters Theses

"Sleep is the essential part of life. Thousands of people are suffering from different kinds sleep disorders. Clinical diagnosing and treating for such disorders are costly, painful and quite sluggish. To reach the demand many commercial products are into the market to encourage home based sleep studies using portable devices. These portable devices are limited in use, cannot be handled easily and quite costly. Advancements in technology miniaturized these portable devices to wearable devices to make them convenient and economical. Elastic, soft and thin silicon membrane with physical properties well matched with that of the epidermis provides conformal and robust …


Behavior Of Hollow-Core Composite Columns Under Torsion Loading, Sujith Anumolu Jan 2016

Behavior Of Hollow-Core Composite Columns Under Torsion Loading, Sujith Anumolu

Masters Theses

"The effect of torsional loads could be significant along with axial and flexural loads on bridge columns during earthquake excitations. The present study presents the torsional behavior of hollow-core steel-concrete-steel columns (HC-SCS) and hollow-core fiber reinforced polymer-concrete-steel columns (HC-FCS). The HC-SCS comprises of sandwiched concrete shell between two steel tubes whereas in HC-FCS column, the outer steel tube of HC-SCS column was replaced by the FRP tube. Both columns have stay-in place permanent form-work to the concrete shell in the form of outer and inner tubes. The steel tubes serve as longitudinal and shear reinforcement to the column. Finite element …


Avon Alkaline Igneous Province, Missouri: Characterization Of Subcontinental Mantle Source And Evolution Via Chemical Analysis Of Olivine, Zachary William Freeman Jan 2016

Avon Alkaline Igneous Province, Missouri: Characterization Of Subcontinental Mantle Source And Evolution Via Chemical Analysis Of Olivine, Zachary William Freeman

Masters Theses

"This article presents the crystallization age of, and composition of olivine phenocrysts within an alnoite of, the Avon Alkaline Igneous Province (AAIP) of Ste. Genevieve County, Missouri. The AAIP is an ultramafic igneous province consisting of approx. 80 known intrusives of diverse lithology and texture. 40Ar/39 Ar geochronology indicates an emplacement age of 386 +/- 1 Ma, which establishes the AAIP as the only known Devonian-age ultramafic igneous body in the Midwestern U.S. Study of the AAIP provides a unique opportunity to characterize the Devonian-age subcontinental mantle and the processes that generated the suite of ultramafic rocks present …


Design And Fabrication Of A System For The Additive Manufacturing Of Transparent Glass, Luke John Gilbert Jan 2016

Design And Fabrication Of A System For The Additive Manufacturing Of Transparent Glass, Luke John Gilbert

Masters Theses

"Despite glass' prevalence in the scientific and engineering community, very little research has been conducted attempting to additively manufacture (AM) glass. Even less research has been done on optically transparent glass. Glass’ material properties make it ineligible for most AM processes if the end result is to be transparent. Even small gas inclusions can cause large amounts of scattering. Additively manufacturing transparent glass brings the advantages found in other AM processes with the added benefit of having optical properties better than those found in polymers. Additively manufacturing glass also allows the optical properties of transparent parts to vary arbitrarily. This …


The Evaluation Of Sequential Optimization And Reliability Analysis, Guannan Liu Jan 2016

The Evaluation Of Sequential Optimization And Reliability Analysis, Guannan Liu

Masters Theses

"Sequential Optimization and Reliability Assessment (SORA) has been used for more than one decade for reliability-based design (RBD), but comprehensive theoretical studies on its performance have not been conducted. Further investigations on its performance are still needed. The objective of this thesis is to evaluate the performance of SORA for various testing problems. The performance of SORA evaluated in this thesis includes (1) accuracy, (2) efficiency, and (3) convergence behavior or robustness with numerical testing problems. SORA is evaluated with comparison with other major RBD methodologies. The testing problems are in different scales (numbers of design variables, random variables, and …


Pim Source Identification Using Vibration Modulation Method, Sen Yang Jan 2016

Pim Source Identification Using Vibration Modulation Method, Sen Yang

Masters Theses

“In Section 1, passive intermodulation (PIM) is introduced and the mechanism of it is briefly explained. Then, the up-to-date PIM testing and source identification method in the industrial and academia worlds will be summarized.

The vibration modulation method for PIM source identification is proposed in Section 2. Different vibration sources were tested and compared, and the test results showed that the vibration modulation method is able to identify PIM source with good accuracy.

Section 3 outlines a special PIM source identification system built based on the vibration modulation system. The two subsystems, PIM receiver and PIM vibrator, are illustrated in …