Digital Commons Network^™

Innovation, The State And Private Enterprise: A Corporate Lawyer's Perspective, Charles M. Yablon

Articles

This is a review essay based on an important recent book, The Entrepreneurial State: Debunking Public vs. Private Sector Myths, by Mariana Mazzucato, a Professor of the Economics of Innovation. In that book, Professor Mazzucato explains how the U.S. Government, acting as an “entrepreneurial state” has made the critical investments in technologies that have given rise to multi-billion dollar new industries. Mazzucato argues that only the State currently has the funds and incentives necessary to finance the earliest and most important phases of the innovation process, investments the private sector cannot and will not make. Mazzucato’s defense of the centrality …

The Entrepreneurial Commons: Reframing The Relationship Between Intellectual Property And Entrepreneurship, Michael J. Burstein

Articles

Reconceptualizing entrepreneurial activity as a knowledge commons leads us to ask a different set of questions than previous studies have, and to utilize a different set of methodological tools. As Part II described, existing approaches to understanding the relationship between IP and entrepreneurship focus on the firm and its reactions to various IP laws. By contrast, to the extent that the exemplar entrepreneurial activities described in Part III can be described as instances of commons governance, the analysis must necessarily be broader. The knowledge commons framework forces us to acknowledge that much of information production and dissemination depends on relationships …

Click Here: The Influence Of Candidates’ Websites In The 2016 Presidential Nomination Contest, Samantha L. Friedman

Master's Theses and Capstones

This project seeks to answer the question: How did the websites of Republican presidential candidates change over time in order to frame the overall message a candidate is sending potential voters? Subsequently, what information cues or shortcuts that are described by Popkin in The Reasoning Voter were being utilized to target voters in their decision making process? The hypothesis was that Republican candidate websites that employed competitive messages on hot button issues attracted low information, partisan voters, resulting in more traffic on their websites and higher standings in the polls. The data was compiled through a content analysis of the …

Shaw Land Surveying Inc. Records - Accession 988, Shaw Land Surveying Inc.

Manuscript Collection

The Shaw Land Surveying, Inc. Records consist of the survey plats and field books pertaining to David Shaw and to Shaw Land Surveying, Inc. Shaw earned his professional surveying license in 1994 and operated his surveying business from 1994 until his death on November 5, 1998. The surveys are arranged in alphabetical order by the client requesting survey, how originally organized by David Shaw, and not necessarily the property owner, however, property owners of individual plats are cross-referenced in Appendix/Index I. There are often several surveys per job and many were performed by other surveyors, which are cross-referenced by the …

Sensor-Based Estimation Of Btex Concentrations In Water Samples Using Recursive Least Squares And Kalman Filter Techniques, Karthick Sothivelr, Florian Bender, Fabien Josse, Edwin E. Yaz, Antonio J. Ricco

Electrical and Computer Engineering Faculty Research and Publications

This work investigates sensor signal processing approaches that can be used with a sensor system for direct on-site monitoring of groundwater, enabling detection and quantification of BTEX (benzene, toluene, ethylbenzene and xylene) compounds at μg/L (ppb) concentrations in the presence of interferents commonly found in groundwater. A model for the sensor response to water samples containing multiple analytes was first formulated based on experimental results. The first signal processing approach utilizes only RLSE (recursive least squares estimation) whereas the second, a two-step processing technique, utilizes both RLSE and bank of Kalman filters for the estimation process. The estimation techniques were …

The Blue Ridge Railroad: Letters Of Mr. George A. Trenholm And Mr. William Gregg On That Subject - Accession 1208 - M575 (628), Blue Ridge Railroad, George A. Trenholm, William Gregg

Manuscript Collection

The collection consists of a booklet of letters to the editor from George A. Trenholm and William Gregg concerning The Blue Ridge Railroad. This railroad was to be built to complete the connection of the line that was to run from Charleston, SC to Cincinnati, Ohio. This line would have run from Anderson, SC to Knoxville, TN. Construction began in 1854 and ceased just before the beginning of the Civil War. The railroad was never completed. The letters appeared in the Edgefield Advertiser, Charleston Courier, and Charleston Mercury in 1860.

Phase Field Modeling Of Electrodeposition Process In Lithium Metal Batteries, Nihal Acharya

Masters Theses

"One of the main weaknesses in long term performance of conventional lithium batteries is the growth of lithium microstructures on the electrode surface due to an electrochemical process, which can eventually lead to failure of these batteries. Suppressing this microstructure growth is a key in developing new generations of lithium metal batteries (LMBs). In this study, a two-dimensional (2D) phase field model is constructed to understand and determine the parameters controlling formation and evolution of microstructures in LMBs. A Ginzburg-Landau free energy functional, which is a function of concentration of Li⁺ and applied voltage, and a system consisting of …

Mechanics Of Impulse Force Reduction For Mitigating Dump Truck Vibrations Under Hislo Conditions, Danish Ali

Masters Theses

"The deployment of large capacity shovels and dump trucks, for achieving economic bulk production capacities, has resulted in high impact shovel loading operations (HISLO). These large shovels generate high impact forces when loading dump trucks with over 100-ton passes under gravity. The impact forces also generate high frequency shock waves, which cause severe truck vibrations, and thus, expose dump truck operators to high levels of whole body vibrations (WBV). The dynamic impact force generates these vibrations, and thus, there is a need to develop efficient technologies to eliminate or reduce its impact. Existing literature and industry practice show that this …

2d Seismic Data And Gas Chimney Interpretation In The South Taranaki Graben, New Zealand, Taqi Talib Alzaki

Masters Theses

"The Taranaki Basin is one of the major oil and gas producing basins offshore New Zealand. The study area covers an area of 10,000 km² in the basin, and includes 171 2D seismic lines and six wells, which are provided by the New Zealand Petroleum & Minerals. Some previous studies refer to the study area as the South Taranaki Graben.

This thesis provides detailed mapping and interpreted subsurface stratigraphy and structure of five horizons, i.e. basement top, Pakawau Group top, Kapuni Group top, Wai-iti Group top, and seafloor. It undertakes studies of the relation between the basin evolution, faults, …

Iron Phosphide Nanostructures As An Efficient Bifunctional Catalysts For Water Splitting, Nikitaa Ashokan

Masters Theses

"The first part of this thesis work focuses on developing a bifunctional catalyst for electrochemical water splitting encompassing both oxygen and hydrogen evolution. A highly efficient catalyst is necessary to improve kinetics of the sluggish four electron process for oxygen evolution reaction (OER) and two-electron process for hydrogen evolution reaction (HER). Recently, transition metal phosphides have gained increasing interest in this field because of their good electrical conductivity properties as well as better catalytic activity. Many transition-metal phosphides are being considered for this application and iron phosphide (FeP) has proved to be a good HER catalyst. In this work, we …

Experimental Evaluations Of Selected Sealants To Remediate Co₂ Leakage, Aaron Jeffrey Blue

Masters Theses

"Carbon Dioxide (CO₂) sequestration into porous and permeable brine-filled aquifers is seen as one of the most feasible solutions for reducing the amount of greenhouse gases released into the atmosphere from coal-fired power plants. To safely store the CO₂, it must be trapped under an impermeable rock acting as a seal. One of the concerns with CO₂ sequestration is the generation of new fractures or reopening of existing fractures caused by CO₂ injection in the sealing formation. This project evaluates the potential of sealing these fractures by injecting sealing materials into them. These sealing …

Particle Mediated Enhanced Mass Transfer Of Diethylhexyl Phthalate: A Pilot Scale System Design, Melissa Buechlein

Masters Theses

"Phthalates are a class of SVOCs that are widely used as plasticizers and recently epidemiological and toxicological research has found a link between phthalate exposure and increased occurrences of adverse health effects. SVOCs can potentially partition into household dust and airborne particles. Models and micro chamber studies have identified that airborne particles effectively increase SVOC deposition to or emissions from surfaces; SVOCs partition to aerosols in the bulk air, the aerosols then migrate to the surfaces due to eddy and Brownian motion, and then the SVOCs is released inside the SVOC concentration boundary layer adjacent to the surface. Concentration boundary …

Effect Of Cooperation On Players' Immersion And Enjoyment, Lakshmi Sushma Daggubati

Masters Theses

"This research examines the effect of cooperative versus non-cooperative game play on immersion and enjoyment in online games. It draws on the self-determination theory to generate the research hypotheses and explain the observed phenomenon. A within-subject experimental design (N=38) was used to evaluate the effects of cooperative versus non-cooperative game play on enjoyment and immersion by having participants play in a manipulated game mode in a controlled gaming environment. The participants' subjective responses were assessed to understand their user experience in cooperative and non-cooperative gaming environments. The results suggest that both immersion and enjoyment were significantly enhanced in cooperative game …

Tracking Silver, Gold, And Titanium Dioxide Nanoparticles Through Drinking Water Systems By Single Particle - Inductively Coupled Plasma - Mass Spectrometry, Ariel Renee Donovan

Masters Theses

"Single particle (SP)-ICP-MS methods were developed to characterize and quantify Ti-containing, titanium dioxide, silver, and gold NP concentration, size, size distribution and dissolved metal element concentration in surface water and treated drinking water. The effectiveness of conventional drinking water treatments (including lime softening, alum coagulation, filtration, and disinfection) to remove NPs from surface water was evaluated using six-gang stirrer jar test simulations. Six-gang stirrers were used to simulate drinking water treatments including lime softening, alum coagulation, powdered activated carbon sorption, filtration, and disinfection by free chlorine. Lime softening effectively removed most nanoparticles added. Source and drinking waters from three large …

Phytoforensics Tools: The Degradation And Detection Of Chlorinated Solvents In Integrated Systems, Tommy J. Goodwin Jr.

Masters Theses

"Due to decades of mismanaged pollutants entering groundwater, subsurface pollution of various compounds has become a widespread challenge. Chlorinated solvents are the most common groundwater contaminants that persist in aquifers, and remediation of these wide-spread plumes is difficult. Bioremediation, permeable reactive barriers, and phytoremediation are remedial technologies that have been developed and applied to chlorinated solvents in groundwater systems. This study integrates these technologies in different combinations to demonstrate the remediation potential of this approach. Zerovalent iron (ZVI) and bioaugmentation with a Dehalococcoides sp. (DHC) culture were applied separately and in combination for degradation of perchloroethene (PCE). Salix pentandra were …

Behavior Of Ultra-High Performance Concrete Bridge Deck Panels Compared To Conventional Stay-In-Place Deck Panels, Valter Gora Venancio

Masters Theses

"The remarkable features of ultra-high performance concrete (UHPC) have been reported. Its application in bridge construction has been an active research area in recent years, attributed to its higher compressive strength, higher ductility and reduced permeability when compared with conventional concrete and even high-strength concrete. Those characteristics are known to increase bridge durability and, consequently, decrease life-cycle maintenance costs.

With that in mind, this study investigated the performance of UHPC stay-in-place (SIP) bridge deck panels subjected to high loads in both flexure and shear. The test matrix consisted of twelve (12) half-scale panels that were 4 feet long and 2 …

Using Adaptive Thresholding And Skewness Correction To Detect Gray Areas In Melanoma In Situ Images, Jason R. Hagerty

Masters Theses

"The incidence of melanoma in situ (MIS) is growing significantly. Detection at the MIS stage provides the highest cure rate for melanoma, but reliable detection of MIS with dermoscopy alone is not yet possible. Adjunct dermoscopic instrumentation using digital image analysis may allow more accurate detection of MIS. Gray areas are a critical component of MIS diagnosis, but automatic detection of these areas remains difficult because similar gray areas are also found in benign lesions. This paper proposes a novel adaptive thresholding technique for automatically detecting gray areas specific to MIS. The proposed model uses only MIS dermoscopic images to …

The Impact Of Heat Exchanging Internals On Hydrodynamics Of Bubble Column Reactor, Ahmed Jasim

Masters Theses

"In this study, the impact of configuration and size of vertical heat exchanging internals in bubble columns on gas holdup, specific gas-liquid interfacial area, bubble chord length, and bubble rise velocity were investigated. Three different configurations of internals, each covering 25% of the column's cross-sectional area, were used to simulate the heat exchanging tubes utilized in the F-T process. The First configuration is a circular-like arrangement of 0.5 inch diameter vertical rods, whereas the second is a hexagonal-like arrangement of 0.5 inch diameter vertical rods. The third configuration is also a circular arrangement but of 1 inch diameter vertical rods …

Imaging Reinforced Concrete: A Comparative Study Of Ground Penetration Radar And Rebarscope, Abhishek Kodi

Masters Theses

"Geophysical techniques have been playing a very vital role in subsurface imaging in the recent past. Technology has been making it both reliable and convenient to utilize non-destructive geophysics techniques like Ground Penetration Radar, Induction current based Rebarscope, Seismic methods, ERT, etc. The applications range from shallow subsurface investigation of Bridge decks to old tunnels, mapping of rabars in a pre-existing construction and analyzing the concrete strength.

The thesis constitutes of a comparative study and analysis of a Ground Penetration Radar system and a Rebarscope. Individual parameters obtained directly from the study and obtained indirectly from the study shall be …

Effect Of Sparse-Build Internal Structure On Performance Of Fused Deposition Modeling Parts, Shixuan Meng

Masters Theses

"Fused deposition modeling (FDM) technology has been used in additive manufacturing for years and is able to significantly reduce both manufacturing time and cost for production tooling and end-use parts. Autoclave molding is one of the conventional tools used to produce composite parts. In autoclave molding, the soft composite material is positioned on the molding tool, and then subjected to vacuum and elevated temperatures to facilitate the curing of the resin. With additive manufacturing (AM), it is possible to fabricate the molding tool with a sparse internal structure, thereby reducing the fabrication time and cost compared to a solid tool. …

Effect Of Build Parameters On Mechanical Properties Of Ultem 9085 Parts By Fused Deposition Modeling, Krishna Prasanth Motaparti

Masters Theses

"Additive manufacturing is a fabrication technique that is used to build components by depositing material in a layer-by-layer manner. Fused Deposition Modeling (FDM) is one of the additive manufacturing techniques which is widely used for prototyping and production applications of thermoplastic components. In load bearing applications, the flexural and compression forces often coexist. In order to avoid failure under these loads, it is essential to study the mechanical properties of the components fabricated by FDM. The main focus of this research is to study the mechanical properties of the fabricated components and to comprehend their dependence on various build parameters. …

A Meta-Architecture Analysis For A Coevolved System-Of-Systems, George Anthony Muller Iv

Masters Theses

"Modern engineered systems are becoming increasingly complex. This is driven in part by an increase in the use of systems-of-systems and network-centric concepts to improve system performance. The growth of systems-of-systems allows stakeholders to achieve improved performance, but also presents new challenges due to increased complexity. These challenges include managing the integration of asynchronously developed systems and assessing SoS performance in uncertain environments.

Many modern systems-of-systems must adapt to operating environment changes to maintain or improve performance. Coevolution is the result of the system and the environment adapting to changes in each other to obtain a performance advantage. The complexity …

Assessing Downstream Stormwater Impacts For Urban Watershed Planning, Johanna Meyer Pavlowsky

Masters Theses

"The urbanization of watersheds has caused debilitating effects to downstream aquatic ecosystems in catchments and streams. The implementation of green infrastructure (GI), such as permeable pavements and bioretention facilities, has been shown to alleviate these effects by both reducing runoff and mitigating pollutants; however, the implements are often not designed with a specific goal of water improvement. This study targets understanding a small, impaired urban watershed, and the benefits green infrastructure may have to provide environmental, social, and economic improvement to the watershed.

Portions of Rolla including much of the S&T campus drain into the impaired urban waterbody Frisco Lake, …

Material Properties Affecting The Penetration Of Metal Targets By Copper Linear Shaped Charges, Kevin Lee Phelps

Masters Theses

"A linear shaped charge (LSC) is an explosive device used in demolition, aerospace, and in other applications that require the cutting of metal. Users of LSC's typically know the size of shaped charge needed to cut their target but commonly encounter previously untested materials. The motivation for this thesis is to provide an understanding as to what target material properties are good indicators of cutting performance so the selection of LSC can be more efficient. The author found that penetration theories for other types shaped charges were insufficient for the LSC, possibly because of the relatively slow projectile created by …

Application Of Embedded Frequency Selective Surfaces For Structural Health Monitoring, Dustin Franklin Pieper

Masters Theses

"This thesis proposes the use of Frequency Selective Surfaces (FSSs) as an embedded structural health monitoring (SHM) sensor. FSSs are periodic arrays of conductive elements that filter certain frequencies of incident electromagnetic radiation. The behavior of this filter is heavily dependent on the geometry of the FSS and local environment. Therefore, by monitoring how this filtering response changes when the geometric or environmental changes take place, information about those changes may be determined. In previous works, FSS-based sensing has shown promise for sensing normal strain (a stretching or compressing geometrical deformation). This concept is extended in this thesis by investigating …

Numerical Analysis Of Flexural Slip During Viscoelastic Buckle Folding, Davi Rodrigues Damasceno

Masters Theses

"Flexural slip is considered to be an important folding mechanism contributing in the development of different folds such as chevron, and kink-band buckle folds. Various filed studies have provided a general conceptual and qualitative understanding of flexural slip. However, quantitative evidence of the importance of the flexural slip mechanism during fold evolution is sparse, as the actual amount of surface parallel displacement, and timing, is difficult to measure accurately, due to the lack of suitable strain markers.

In this study 2D finite element analysis is used to overcome these disadvantages and to simulate flexural slip during viscoelastic buckle folding. Variations …

A Cost Benefit Analysis Of Sst Based Volt-Var Control, Guruprasad Ramani

Masters Theses

"The overall objective of this thesis work is to improve system power quality with the help of solid state transformers (SSTs). Two methods to improve the system power quality are explored: a) achieving a unity power factor at all the load buses, and b) improving the system voltage profile to meet a desired voltage regulation requirement of 0.95

A Feasibility Study Of A Nuclear Power Plant With No Moving Parts, Jonathan Mark Schattke

Masters Theses

"In a nuclear reactor design, every moving part in a system is considered a failure point. In this study, a proposal is made for designing a nuclear reactor that has no moving parts by coupling an accelerator driven core (removing control system moving parts) to a magnetohydrodynamic generator (removing power generation moving parts) using mercury coolant (removing pumping system moving parts). Further safety is realized by using a subcritical core, where the core is never able to sustain a chain reaction on its own, obviating many safety systems. The design is verified with a Monte Carlo simulation "--Abstract, page iii.

Thermal Characterization Of Phase Change Materials For Thermal Energy Storage, Rami Mohammad Reda Saeed

Masters Theses

"The study provides a valuable and useful database for Phase Change Materials (PCMs) for Thermal Energy Storage (TES) applications. Only a few existing studies have provided an overall investigation of thermophysical properties of PCMs in this detailed manner. Several organic PCMs, namely Myristic acid, Capric Acid, Lauryl Alcohol, Palmitic acid and Lauric acid, have been characterized after being carefully selected to cover wide range of TES applications. Insights and information gained from this work will be applied toward the design and modelling of many low temperature thermal energy storage applications. The study experimentally investigated uncertainty of thermal characterization of PCMs …

Evaluation Of Ultra-High Performance Concrete (Uhpc) In Joints Of Bridge Girders, Saipavan Rallabhandhi

Masters Theses

"Joints are often considered as the weak link in a structure and often deterioration of the structure initiates from the joints. Joints transfer the stresses from super-structure to sub-structure and in this process are subjected to large transfer stresses. Not much attention is given to the design of joints as they are positioned in low moment regions and typically a 4 to 6 ksi (28 to 41 MPa) concrete is used to fill the joints. One of the solution to this problem is Ultra-high performance concrete (UHPC). In the recent past significant research has been done to use UHPC in …