Digital Commons Network^™

Case Study: Optimisation Of A Stabilised Large Scale Atf Perfusion Process, Jarno Robin

Integrated Continuous Biomanufacturing II

Mammalian cell cultures are used to produce a range of recombinant therapeutic proteins where post-translational modifications, such as glycosylation, are of key importance. The demand for proteins expressed in mammalian cells has increased rapidly over the last decade, primarily driven by the success of monoclonal antibodies (mAbs) that are required at large doses for therapeutic use. Several host cell lines are employed for manufacturing (e.g. NS0, hybridomas, PER.C6, BHK, etc.) but the primary workhorses are Chinese Hamster Ovary (CHO)-derived cell lines accounting for over 70% of the recombinant therapeutics. CHO cells have a proven track record as a safe host …

Efficient Approaches For Perfusion Medium Development, Thomas Falkman, Andreas Castan, Eric Faldt, Teres Persson, Jill Simon, Helena Nordvarg

Integrated Continuous Biomanufacturing II

Here, we present a fast and convenient strategy for developing a high-cell density perfusion process for antibody-producing Chinese hamster ovary (CHO) cells based on the commercially available ActiCHO™ Media System. ActiCHO P base medium was used as a starting point and ActiCHO Feed-A and Feed-B were added in various concentrations as supplements. The resulting perfusion medium prototypes were first evaluated in batch cultures, applying a design of experiment (DoE) strategy (Figure 1), and then tested in small-scale perfusion cultures in rocking single-use WAVE bioreactor™ systems (Figure 2). The medium optimization resulted in a final process with a cell-specific perfusion rate …

Design Criteria And Requirements For Development Of Perfusion Media, Jochen Sieck

Integrated Continuous Biomanufacturing II

There is increasing interest in perfusion processing as a means for increasing overall yield of the upstream process, facilitating a reduction of manufacturing costs. However, as in many companies the focus was on fed-batch process development for decades, hands-on knowledge about medium development for perfusion processes is considered a key gap for the wider adoption of perfusion processing in biologics manufacturing today.

Compared to batch-based cultivation, perfusion processes have fundamentally different requirements and challenges in terms of medium composition. The continuous nature of perfusion processes allows to achieve steady-state, although not all practitioners consider this desirable. The main challenge in …

Optimal Control Of A Continuous Bioreactor For Maximized Beta-Carotene Production, Nazmul Karim, Jonathan Raftery, Xinghua Pan

Integrated Continuous Biomanufacturing II

Carotenes such as β-carotene have a positive impact in human health as a precursor of vitamin A. Structural complexity of these compounds makes their chemical synthesis a difficult endeavor, facilitating the need for their biological production. Continuous operation can be used in these processes to allow for increased cell viability through the mitigation of substrate and product inhibition, thereby increasing the productivity of the carotenoid product. This work looks to examine the operating conditions necessary to achieve the maximum production of the desired carotenoid products when produced via continuous operation. First, a two-level parameter estimation method is utilized to develop …

Genomics Based Methodology Of Cell-Culture Media Formulation For Improved Biotherapeutic Productivity And Quality Consistency, Hemlata Bhatia, Seongkyu Yoon

Integrated Continuous Biomanufacturing II

Biosimilar drugs are emerging very fast as the patents of innovator’s drugs are expiring. Media formulation development has to be carried out for each bio similar, which takes up a significant amount of time and generally, a random approach is taken to meet comparability requirement and improve the product titer. A targeted approach with genome information of host cell as a function of media composition can provide useful information to explain the product titer variability and comparability. A 2-step correlation model explaining relationship between cell-culture productivity and quality, and media compositions taking gene expression as intermediate attributes can provide a …

Simple Method Transfer From Batch To Continuous Chromatography Process To Fit Parameters To Business Needs, Rene Gantier, Karl Rogler, Xhorxhi Gjoka, Ron Noel, Alexander Martino, Mark Schofield

Integrated Continuous Biomanufacturing II

Multicolumn chromatography (MCC) is a proven technique to significantly improve performance of bio-processes by increasing specific productivity, reducing volume of resin used and enabling disposable, continuous and integrated processes. But the transfer of process parameters from batch to continuous mode is perceived as complex and could limit adoption at clinical and manufacturing scales.

We have developed and tested a new method to translate data from a minimal number of single column runs into a multicolumn process with predictable performance at large scale. Depending on the titre of the product and the processing time required, the method predicts the optimal number …

Upstream Perfusion Process: Back To The Future, Jean-Marc Bielser, Henri Kornmann, Herve Broly

Integrated Continuous Biomanufacturing II

At an early stage of bioprocess science, continuous operations were the workhorse in the industry. Therefore, EMD-Serono has legacy with continuous upstream processes as many of its molecules such as Rebif are being produced in perfusion mode. These processes from the 90’s consume large volumes of commercial media and demonstrate low productivities. Cells are mainly attached because no performant cell retention device existed for cells in suspension at that time.

Around 10-15 years ago, the industry decided to move on fed-batch operations. EMD-Serono also re-oriented towards fed-batch operations. Molecules such as Erbitux are now being produced in 15,000 L stainless …

Development Of A First Generation Perfusion Process And Medium For Continuous Processing Based On Existing Fed-Batch Platform Media, Henry Lin, Samantha Wang, Robert Leighty, Scott Godfrey, Samet Yildirim, Adam Osborne, Flaka Radonigi, Jens Vogel, Jon Coffman

Integrated Continuous Biomanufacturing II

Process intensification leveraging perfusion offers tremendous potential for yield improvement over fed-batch processes for the production of monoclonal antibodies. In the context of continuous processing, the goal is to achieve highly intensified perfusion processes that allow substantial footprint reduction and enable flexible adaptation in new facilities. However developing a perfusion process and medium without prior technology requires leveraging the existing fed-batch platform knowledge. Evolving a medium for perfusion relies on designing suitable mixtures of basal and feed media that serve as adequate starting points for development. Focus on optimization of the medium to decrease byproduct waste, reduce unnecessary cell growth …

From Fed-Batch To Perfusion: Productivity And Quality Considerations For A Late-Stage Program, Sen Xu, Hao Chen

Integrated Continuous Biomanufacturing II

In this poster, we will present the rapid development of a perfusion process with high productivity for late-stage manufacturing. The process uses a Chinese Hamster Ovary (CHO) cell line for monoclonal antibody production. Prior to the development, the clinical supply was manufactured by a fed-batch process with the same cell line.

To achieve desired productivity and comparable quality attributes, we developed a repeated batch shake flask model to rapidly screen media and process conditions. Shake flasks were inoculated at 10 × 10⁶ cells/mL and maintained in a CO₂ incubator with medium exchange for every 48 hours, repeated for …

Innovations In Bioreactor Operational Modes – Hybrid Semi-Continuous Processes To Push Beyond The Limits Of Conventional Fed-Batch Cultures, Gregory Hiller, Matthew Gagnon, Ana Maria Ovalle, Wenge Wang, Elizabeth Eydelman

Integrated Continuous Biomanufacturing II

Due to the limits of feed volume addition and the problem of amino acid counter ion, miscellaneous osmolyte, and cell growth inhibitor accumulation, the fed-batch mode of bioreactor operation for CHO cell production of protein therapeutics is inherently limited with respect to the cell densities and productivities that are achievable. Continuous or perfusion culture with cell retention can overcome some of these limitations, but suffers from the disadvantages of large volume media consumption, long times to reach peak cell densities, and complications with cell retention devices. We will describe hybrid versions of continuous culture that overcome many of these limitations …

Mab Product Consistency Achieved In Long Duration Microfiltration-Based Cho Perfusion Process, Douglas Rank, Christopher Martin, Lee Madrid, Michael Phillips

Integrated Continuous Biomanufacturing II

Perfusion processes have traditionally been used for the generation of unstable proteins in cell culture systems. The use of perfusion for production of stable proteins has been limited by low product concentration, media costs, and system complexity. However, with the advent of new single-use technology, cell culture media specifically formulated to support high density perfusion, and high-producing cell lines, perfusion processes are gaining widespread industry attention. Additionally, perfusion processes are considered an integral part of the “Factory of the Future” vision through enabling continuous processing while delivering a product effluent with consistent product quality and concentration.

In this study, we …

Continuous Downstream Processing Of A Monoclonal Antibody Using Periodic Counter Current Chromatography (Pcc) And Straight Through Processing (Stp), Hans Blom, Christer Eriksson, Annika Forss, Helena Skoglar

Integrated Continuous Biomanufacturing II

There is an increased interest to perform process intensification in order to reduce costs and improve throughput in the development and production of monoclonal antibodies (MAbs). One solution to these demands can be to implement continuous or semi-continuous downstream processing. New emerging technologies such as periodic counter-current (PCC) chromatography and straight through processing (STP) are entering the market. Here, these two technologies were evaluated in a continuous three step chromatography MAb process. The capture step was performed with protein A media (resin) on a 3 column PCC chromatography system followed by two polishing steps which were connected in series with …

Ada News - 11/02/2015, American Dental Association, Publishing Division

ADA News

Established in 1970 as the official newspaper of the American Dental Association, the ADA News serves practicing dentists and others allied to the dental profession in the U.S. and internationally. It is the No. 1 source of news and information about the many benefits and services the ADA delivers to members daily as well as timely information on scientific, social, political and economic developments affecting dentistry and health care.

The Tiger Vol. 109 Issue 46 2015-11-02, Clemson University

Tiger Newspapers 2015

No abstract provided.

November 2, 2015, James Madison University

The Breeze, 2010-2019

The Breeze is the student newspaper of James Madison University in Harrisonburg, Virginia.

Current, November 02, 2015, University Of Missouri-St. Louis

Current (2010s)

No abstract provided.

Amnéris Pérez-Román, Clara Roman-Odio

Interviews

No abstract provided.

Columbia Chronicle (11/02/2015)

Columbia Chronicle

Student newspaper from November 2, 2015 entitled The Columbia Chronicle. This issue is 40 pages and is listed as Volume 51, Issue 9. Cover story: "Jeff Garlin: 'You can be as stupid as you want-you're students'" Editor-in-Chief: Kyra Senese

Grand Valley Forum, Volume 040, Number 10, November 02, 2015, Grand Valley State University

2015-2016, Volume 40

Grand Valley Forum is Grand Valley State's faculty and staff newsletter, published from 1976 to the present.

Optical Enzymatic Sensors For Continuous Monitoring Of Bioreactors, Kenneth Reardon, Brian Heinze, Trenton Danna

Integrated Continuous Biomanufacturing II

Continuous monitoring of biotechnological processes is important for control and optimization of quality and productivity. Typically, samples must be removed from the cultivation and analyzed in a laboratory to determine the concentrations of substrates and products. These time-delayed data cannot be used for real-time process control. The Process Analytical Technology initiative of the FDA supports the use of on-line measurement techniques for process development, production, and quality. An overview of sensors will be presented, focusing on in-situ sensors that contact the biological medium, and external sensors that contact the medium either optically (ex situ) or via a sterile (and disposable) …

Salt-Tolerant Cation Exchange Hd-Sb Hydrogel Membrane: Mab Purification Performance In Flowthrough Mode, Dharmesh Kanani, Daniel Luo, Nirali Paghdal, Navneet Sidhu, Annabel Shang, Jim Stout

Integrated Continuous Biomanufacturing II

Development of Protein A based purification platforms have simplified the downstream processing of monoclonal antibodies (mAb), the largest component of biopharmaceuticals. The ever increasing titer of the cell culture process is putting more pressure on the downstream process to further increase its productivity. The classical Protein A based mAb purification platform consists of two polishing steps, bind and elute cation-exchanger and flowthrough anion-exchanger. Cation-exchange chromatography is very efficient at the separation of HCP, leached Protein A and product-related impurities such as aggregates and fragments in bind and elute mode. However, anion-exchange chromatography is a proven technology to remove DNA, viruses, …

Two Repositories, One Strategy: Marketing Digital Collections, Daardi Sizemore, Heidi J. Southworth

Library Services Publications

In the last year, the Library at Minnesota State University, Mankato has launched two repositories for digital content, Cornerstone: A Collection of Scholarly and Creative Works and ARCH: University Archives Digital Collections. An important component of developing these repositories has been our marketing efforts. We will share how we worked together with Integrated Marketing, Printing Services, and the Library Outreach Committee to actively promote and advance the collections.

Law, Justice, And Culture Student Interns At Aclu Ohio, Ohio University College Of Arts & Sciences

All Forum Articles

No abstract provided.

Politics Fast | A Campus Divided? Racism, Direct Action & Mizzou, Nov. 18, Ohio University College Of Arts & Sciences

All Forum Articles

No abstract provided.

11.02.15., Tana Duong

ASWC Meeting Minutes

No abstract provided.

The New Hampshire, Vol. 105 [106], No. 17 (Nov. 2, 2015), The New Hampshire

The New Hampshire Print Edition

An independent student produced newspaper from the University of New Hampshire. This volume was printed as 105, but it is the 106th volume in the series.

In The News: November 2, 2015, Michael Duricy

Marian Library Blog Archive

Read recent items about Mary in both Catholic and secular news. Also see International Marian Research Institute news and updates.

The Utah Statesman, November 2, 2015, Utah State University

The Utah Statesman

Weekly student newspaper of Utah State University in Logan.

The Rider (2015-11-02), Jesus Sanchez

The Rider Archives

Vol.1 No.10

Exploring The Role Of Identification And Moral Disengagement In The Enjoyment Of An Antihero Television Series, Sophie Janicke, Arthur A. Raney

Communication Faculty Articles and Research

Affective disposition theory explains well the process of enjoying hero narratives but not the appeal of narratives featuring antiheroes. Recent antihero studies suggest that character identification and moral disengagement might be important factors in the enjoyment of such fare. The current study builds on this work. A sample of 101 self-identified fans and nonfans of the television series 24 viewed a condensed version of Season 1, providing evaluation of various protagonist perceptions, moral judgments, and emotional responses to the narrative, as well as overall enjoyment. As expected, fans reported greater liking of the protagonist and greater enjoyment. But more importantly, …